Scribd
Upload
49 views2 pages

Das 040 0003

Uploaded by

Pamungkas Karawang22
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views2 pages

Das 040 0003

Uploaded by

Pamungkas Karawang22
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CMG-40TD

Broadband Seismometer and Digitiser


The Güralp Systems CMG-40TD is a rugged and robust three-
component broadband seismometer with an on-board DM24 digitiser.
It is ideally suited for installation in vaults with moderate noise.

Key Features:
True broadband force-feedback instrument

Four low noise 24 bit digital outputs.

Self-contained in a waterproof steel case with fully


adjustable levelling feet

No mass clamping required – plug in and go

High sensitivity and dynamic range

Standard response of 30 seconds to 50 Hertz.


Options of 1, 10, 30 or 60 seconds for the long period
corner and 50 or 100 Hertz for the high frequency
corner

High-gain feedback loop eliminates mechanical non-


linearity (the overall measured linearity exceeds 90
dB) and minimizes resonances in the spring system.

Low-frequency vibration modes are carefully avoided


in the design. The lowest spurious vibration mode of
the 40T is a barely measurable resonance at 440 Hz.

GÜRALP SYSTEMS LTD | W: guralp.com | T: +44 118 981 9056 | E: [email protected] | Seismology | Energy | Civil Engineering | Security
Specifications
CMG-40TD

Velocity output bandwidth 30 seconds – 50 Hertz (Standard)


1s, 2s, 10s or 60s long period options
100Hz high frequency option

Velocity output sensitivity 2 × 400 V/ms-1 (Standard)


Options for 2 × 1000 or 2 × 1600 V/ms-1
Optional high-gain output (× 10)

Peak output ±10 V (20 V peak-to-peak)


-1
Optional high gain sensitivity 2 × 10000 V/ms (adjustable)

Lowest spurious resonance 450 Hz


Linearity > 90 dB
Cross-axis rejection > 65 dB
Electronics noise level –172 dB (relative to 1m2s-4Hz-1)

Operating temperature range –20 to +75 °C


Temperature sensitivity < 0.6 V per 10 °C
Mass recentring range ±3 ° from horizontal

Materials Stainless steel case


Gold plated contacts
O-ring seals throughout

Case diameter 154 mm


Case height (with handle) 207 mm
Weight 2.49 kg

Power supply 10 – 36 V DC
Optional low power sensor 5 V DC supply (output ±4.5 V)
Current at 12 V DC 38 mA

Calibration controls Common signal & enable lines exposed on sensor connector
Offset zeroing Adjustable through case

Optional remote control Offset zeroing with DC motors


Optional accessories Handheld Control Unit

GÜRALP SYSTEMS LTD | W: guralp.com | T: +44 118 981 9056 | E: [email protected] | Seismology | Energy | Civil Engineering | Security
DAS-040-0003 Issue B

You might also like