Scribd
Upload
13 views2 pages

Ivium Nstat

Uploaded by

ely wagner
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views2 pages

Ivium Nstat

Uploaded by

ely wagner
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Ivium-n-Stat Multichannel potentiostat

More for less:


The first affordable multi-channel
high performance instrument!
• Batteries

• Fuel cells

• Electrode
development

• Biotechnology

• Corrosion

Up to 8 channels per frame


Stackable up to 8 frames with 64 channels

Each channel with integrated impedance analyser!


analyser!

Ivium-n-Stat:
• 1-8 channels per frame, stackable up to 64 channels
• Independent floating operation
• Modules encapsulated for easy handling
• 2-mode software:
IviumSoft: for independent operation per channel
IviumNcontrol: synchronous control of multiple channels
s-Module:
• ± 2.5 A @ ±10 V (expandable to ± 5 A @ ±10 V)
• Each channel with integrated impedance analyser: 10µHz to 250 kHz
• Data acquisition rate: 100 kHz
• Current ranges 10 nA – 10 A; min. resolution: 1 pA
• Peripheral analog/digital channels

Ivium Technologies B.V. www.ivium.nl


De Zaale 11 E-mail: [email protected]
5612 AJ Eindhoven Tel. +31 40 2390600
The Netherlands Fax. +31 40 2390601
Ivium-n-Stat s-Module

System Performance
4 Electrodes WE, CE, RE and S
Current compliance ±2.5 A
Maximum output Voltage ± 10 V below 1A and ±8 V up to 2.5 A
Potentiostat Bandwidth 250 kHz
Stability settings High Speed, Standard, and High Stability
Programmable response filter 1 MHz , 100 kHz , 10 kHz , 1 kHz , 10 Hz
Signal acquisition dual channel 16 bit ADC, 100.000 samples/sec

Potentiostat
Applied potential range ±10 V, with 0.33 mV resolution
Applied potential accuracy 0.2%, or 2 mV
Current ranges ±10 nA to ±10 A in 10 steps
Measured current resolution 0.015% of current range, minimum 1 pA

Galvanostat
Applied current resolution 0.33% of applied current range
Applied current accuracy 0.2%
Potential ranges ±10 mV, ±100 mV, ±1 V, ±10 V
Measured potential resolution 0.038% of potential range, minimum 3 uV

Impedance Analyser
Frequency range 10µHz to 250 kHz
Amplitude 0.015mV to 1.0V, or 0.03% to 100% of current range
DC offset 16 bit dc offset subtraction, and 2 dc-decoupling filters

Electrometer
Input impedance >1000 Gohm //<8pF
Input bias current <10 pA
Bandwidth >1 MHz

Peripheral connections
2 Analog in 0 to +5.000 V, 16 bits resolution, bandwidth 40 kHz
1 analog out 0 to +4.096 V, 16 bits resolution
1 Digital input, 3 Digital outputs 0 to +5 V
I-out and E-out analog monitor for cell current and potential
AC-out ±0.5 V sinewave 10µHz-250kHz with variable attenuation
Channel-X, Channel-Y inputs ±4 V: to record impedance from peripheral devices

Environment
Size w x d x h = 3 x 35 x 13 cm
Weight 0.7 kg
PC requirements Windows XP or Vista, with free USB port

Specifications: IviumNstat main frame


Slot positions 8 (can mount up to 8 S- or B-modules)
Common connectors GND and combined emergency off control monitor
Power requirements 100-240 V, 47-63 Hz, 300 W
Interfacing USB 1.1 or 2.0 compliant
Size w x d x h = 47 x 36 x 14 cm
Weight 6.2 kg (no modules)
11.8 kg (with 8 modules)
Power booster
B-module: power booster ±5 A ±10 V power booster for S-module
Available Q2 of 2010

Specifications subject to change, Ivium Technologies BV ©2009

You might also like