www.osram-os.

com
SFH 4356
DATASHEET

SFH 4356
Datasheet

Published by ams-OSRAM AG
Tobelbader Strasse 30, 8141 Premstaetten, Austria


Phone +43 3136 500-0

ams-osram.com
| Version
1 rights
© All 1.6 | 2022-08-08
reserved
 SFH 4356
DATASHEET

Radial T1

SFH 4356
Infrared Emitter (850 nm)

Applications
- Access Control & Security - Home & Building Automation
- Appliances & Tools

Features
- Package: black epoxy

- ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
- Wavelength 850nm
- Short switching times
- Good spectral match to silicon photodetectors
- package similar to SFH 309


2 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Ordering Information
Type Radiant intensity 1)2)
Radiant intensity 1) Ordering Code
typ.
IF = 100 mA; tp = 20 ms IF = 100 mA; tp = 20 ms
Ie Ie

SFH 4356-UV 45 ... 112 mW/sr 90 mW/sr Q65111A8863

SFH 4356 45 ... 280 mW/sr 90 mW/sr Q65111A6136




3 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Maximum Ratings
TA = 25 °C
Parameter Symbol Values

Operating temperature Top min. -40 °C

max. 100 °C
Storage temperature Tstg min. -40 °C
max. 100 °C
Junction temperature Tj max. 100 °C
Forward current IF max. 100 mA
Forward current pulsed IF pulse max. 1A
tp ≤ 200 µs; D ≤ 0.005
Reverse voltage 3) VR max. 5V
Power consumption Ptot max. 200 mW
ESD withstand voltage VESD max. 2 kV
acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)




4 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Characteristics
IF = 100 mA; tp = 20 ms; TA = 25 °C
Parameter Symbol Values

Peak wavelength λpeak typ. 860 nm

Centroid wavelength λcentroid typ. 850 nm
Spectral bandwidth at 50% Irel,max (FWHM) ∆λ typ. 30 nm
Half angle φ typ. 20 °
Dimensions of active chip area LxW typ. 0.3 x 0.3
mm x mm
Rise time (10% / 90%) tr typ. 12 ns
IF = 100 mA; RL = 50 Ω
Fall time (10% / 90%) tf typ. 12 ns
IF = 100 mA; RL = 50 Ω
Forward voltage 4) VF typ. 1.7 V
max. 1.9 V
Forward voltage 4) VF typ. 3.6 V
IF = 1 A; tp = 100 µs max. 4.5 V
Reverse current 3) IR typ. 0.01 µA
VR = 5 V max. 10 µA
Radiant intensity 1) Ie typ. 370 mW/sr
IF = 1 A; tp = 100 µs
Total radiant flux 5) Φe typ. 80 mW
Temperature coefficient of voltage TCV typ. -0.6 mV / K
Temperature coefficient of brightness TCI typ. -0.3 % / K


Temperature coefficient of wavelength
Thermal resistance junction solder point real 6)
TCλ
RthJS real
typ.
max.
0.3 nm / K
150 K / W
Thermal resistance junction ambient real 7) RthJA max. 350 K / W


5 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Brightness Groups
TA = 25 °C

Group Radiant intensity 1)2) Radiant intensity 1)2)

IF = 100 mA; tp = 20 ms IF = 100 mA; tp = 20 ms
min. max.
Ie Ie

U 45 mW/sr 71 mW/sr
V 71 mW/sr 112 mW/sr
AW 112 mW/sr 180 mW/sr
BW 180 mW/sr 280 mW/sr

Only one group in one packing unit.




6 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Relative Spectral Emission 8), 9)

Ie,rel = f (λ); IF = 100 mA; tp = 20 ms

OHF04132
100
I rel %

80

60

40

20

0
700 750 800 850 nm 950
λ

Radiation Characteristics 8), 9)

Ie,rel = f (φ)
40˚ 30˚ 20˚ 10˚ 0˚ OHF05658

ϕ 1.0


50˚

0.8

60˚
0.6

70˚ 0.4

80˚ 0.2

0
90˚

100˚
1.0 0.8 0.6 0.4 0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚


7 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Forward current 8), 9) Radiant Intensity 8), 9)

IF = f (VF); single pulse; tp = 100 µs Ie/Ie(100mA) = f (IF); single pulse; tp = 100 µs

OHF05645 OHF05641
103 101
mA Ιe
IF
Ι e (100 mA)

100
102

5
10-1

101

5 10-2

100 10-3 0
0 1 2 3 V 4 10 101 102 mA 103
VF IF

Max. Permissible Forward Current Permissible Pulse Handling Capability

IF = f (TA); Rthja = 350 K / W IF = f (tp); duty cycle D = parameter; TA = 25°C
OHF05655 OHF05656
120 1.1
tP
mA A t
IF IF D = TP IF


100 T
0.9

0.8 D=
80 0.005
0.7 0.01
0.02
0.6 0.05
60 0.1
0.5 0.2
0.5
0.4 1
40
0.3

20 0.2

0.1

0 0 -5
0 20 40 60 80 ˚C 100 10 10-4 10-3 10-2 10-1 100 101 s 102
TA tp


8 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Permissible Pulse Handling Capability

IF = f (tp); duty cycle D = parameter; TA = 85°C
OHF05657
1.1
tP
A t
IF D = TP IF
T
0.9

0.8

0.7
D=
0.6 0.005
0.01
0.5 0.02
0.05
0.4 0.1
0.2
0.3 0.5
1
0.2

0.1

0 -5
10 10-4 10-3 10-2 10-1 100 101 s 102
tp




9 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Dimensional Drawing 10)

Further Information:
Approximate Weight: 162.0 mg

Package marking: Anode




10 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Recommended Solder Pad 10)

Pad 1: cathode




11 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

TTW Soldering
IEC-61760-1 TTW
OHA04645
300
˚C 10 s max., max. contact time 5 s per wave

T 250 235 ˚C - 260 ˚C Continuous line: typical process

First wave Second wave Dotted line: process limits

200 ∆T < 150 K

Cooling
Preheating
ca. 3.5 K/s typical
150 ca. 2 K/s
130 ˚C
ca. 5 K/s
120 ˚C
Typical
100 100 ˚C

50

0
0 20 40 60 80 100 120 140 160 180 200 220 s 240
t

Notes
The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of
lamps and lamp systems). Within the risk grouping system of this IEC standard, the device specified in this
data sheet falls into exempt risk group - Exempt.
Subcomponents of this device contain, in addition to other substances, metal filled materials including silver.
Metal filled materials can be affected by environments that contain traces of aggressive substances. There-
fore, we recommend that customers minimize device exposure to aggressive substances during storage,


production, and use. Devices that showed visible discoloration when tested using the described tests above
did show no performance deviations within failure limits during the stated test duration. Respective failure
limits are described in the IEC60810.

Packing information is available on the internet (online product catalog).

For further application related information please visit www.osram-os.com/appnotes


12 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Disclaimer
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may
contain dangerous substances.
For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version on our website.

Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest
sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of
transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we
shall have to invoice you for any costs incurred.

Product and functional safety devices/applications or medical devices/applications

Our components are not developed, constructed or tested for the application as safety relevant component
or for the application in medical devices.
Our products are not qualified at module and system level for such application.

In case buyer – or customer supplied by buyer – considers using our components in product safety devices/
applications or medical devices/applications, buyer and/or customer has to inform our local sales partner
immediately and we and buyer and /or customer will analyze and coordinate the customer-specific request
between us and buyer and/or customer.




13 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Glossary
1)
Radiant intensity: Measured at a solid angle of Ω = 0.01 sr
2)
Brightness: The brightness values are measured with a tolerance of ±11%.
3)
Reverse Operation: This product is intended to be operated applying a forward current within the
specified range. Applying any continuous reverse bias or forward bias below the voltage range of light
emission shall be avoided because it may cause migration which can change the electro-optical char-
acteristics or damage the LED.
4)
Forward Voltage: The forward voltages are measured with a tolerance of ±0.1 V.
5)
Total radiant flux: Measured with integrating sphere.
6)
Thermal resistance: junction - soldering point, of the device only, mounted on an ideal heatsink (e.g.
metal block)
7)
Thermal resistance: junction ‐ ambient, mounted on PC‐board (FR4), padsize 16 mm² each
8)
Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-
es, the typical data or calculated correlations of technical parameters can only reflect statistical figures.
These do not necessarily correspond to the actual parameters of each single product, which could dif-
fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.
because of technical improvements, these typ. data will be changed without any further notice.
9)
Testing temperature: TA = 25°C (unless otherwise specified)
10)
Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with ±0.1 and
dimensions are specified in mm.




14 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Revision History
Version Date Change

1.4 2021-09-21 Maximum Ratings

1.5 2021-11-18 Features
Maximum Ratings
Characteristics
Electro - Optical Characteristics (Diagrams)
1.6 2022-08-08 Applications
New Layout




15 | Version 1.6 | 2022-08-08

 SFH 4356
DATASHEET

Published by ams-OSRAM AG
Tobelbader Strasse 30, 8141 Premstaetten, Austria
Phone +43 3136 500-0


ams-osram.com
© All rights reserved
16 | Version 1.6 | 2022-08-08