0% found this document useful (0 votes)
21 views2 pages

OGGLAB SynchroLight

Uploaded by

Paul Redai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
21 views2 pages

OGGLAB SynchroLight

Uploaded by

Paul Redai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SynchroLight

Synchrolight is the solution to avoid overheating of the headlights used in macro photography,
overheating reduces the useful life of LEDs and halogen lamps, can deteriorate the most delicate
subjects and rapidly deteriorates the polarizing filters placed in front of the lights. SynchroLight turns on
the lights only at the moment of shooting, a microcontroller synchronizes the signal coming from the
controller for the stacks with the switching on of the lights, the on-off sequence significantly reduces the
temperature, this allows to use the lighting also at maximum power without risk of overheating.
An optocoupler protects the camera from any damage.
The SynchroLight when receiving the signal from the stack controller turns on the power supply for a
second, a three-second pause between one shot and the other is a good solution to avoid headlights
overheating.

trigger led power on led


Power Out
Plug 5.5x2.5mm
Cable length 75cm. Power IN
12V max 5A
Plug 5.5x2.5mm

Camera Out Camera IN


(to the camera) (from controller)
Jack stereo 2.5mm Jack stereo 2.5mm

Test button / Manual release Synchro for synchronous trigger


Continuos to have continuous light

Power IN 12V DC 5A max - socket 5.5x2.5mm


Power OUT 12V DC 5A max plug 5.5x2.5mm, cable length 75 cm
Com
Camera IN: 3 pole jack stereo 2.5mm
Trigger
Camera OU T: 3 pole jack stereo 2.5mm, optoisolated
Focus

Test button: Trigger time 0.5 s. Power on 1.5 s.


Synchro trigger: Dynamic trigger/focus, same time as the input pulse, Power ON = trigger/focus time + 1 sec.
Dimensions: 104x60x31mm
Weight: 102 gr.
Diagram for connecting the Synchrolight to the DB120EB illuminator.

AC/DC Adapter
Input 240V ac 50-60Hz
Output 12V 4A
Plug ø 5.5x2.5mm

CAMERA FOCUS STACKING


CONTROLLER

You might also like