Bill No 2 & Bill No 3 - Reno Office & Library - Archi Items

Description Qty Unit Rate Amount
BILL NO. 2 - RENOVATION TO OFFICES
ELEMENT NO 2 - INTERNAL WALL AND INTERNAL WALL FINISHES
INTERNAL WALL
Notes:
Refer to Drawings, Specifications and Preambles to all trades for description of materials and
workmanship and general labour applicable to this Schedule/BQ.
All timber used must dri-con and tanalised with treatment certificates. All metal elements must hot-
dipped galvanised unless otherwise stated. For exposed metal elements, they shall be in selected
paint finish.
All metal and steel elements e 85 microns with 20 years warranty. All metal and steel elements
not exposed to the weather eventhough covered with finishing material must have painting
protection with 10 years warranty as specified, all to the Architect's approval. All steelwork shall
be completed with all necessary base plate, connection plate, shoes, bolts, grouting and etc, The
Tenderer's price shall include all of the above mentioned.xposed to the weather must be hot dip
galvanised to
The Contractor to note all structural steel works specified below or elsewhere in this Bills of Quantities
to be factory fabricated and shop primed with one coats of Micaceous Iron Oxide paint all in
accordance with Manufacturer's instruction and Architect's approval.
The Contractor to note all structural shalL be to soffit beam.
The Contractor to include in the tender price for all the above cost in compliance thereof.
TO COLLECTION RM -
2/1
ELEMENT NO 2 - INTERNAL WALL AND INTERNAL WALL FINISHES (Cont'd)
INTERNAL WALL (Cont'd)
PLASTER BOARD PARTITION
A To construct and complete 100mm thick drywall up to soffit of slab with approved gypsum board partition
comprising 3" metal stud frame and nailed to floor and anchored to sofit slab, galvanised 'C' channel
frame at ceiling height complete with 12mm thick plaster board on both sides including polyfiller finish to
all joint and ready to received new finishes
808 M2
B To construct and complete 100mm thick drywall up to soffit of slab with approved sound proof gypsum
board partition with 1 layer rockwool soundproofing comprising 3" metal stud frame and nailed to floor
and anchored to sofit slab, galvanised 'C' channel frame at ceiling height, complete with 12mm thick
plaster board on both sides including polyfiller finish to all joint and ready to received new finishes
54 M2
TO COLLECTION RM -
2/2
GLASS WALL
Powder coated aluminium frame 8mm thick tempered glass wall complete with frames,
couplings, transomes, mullions, concealed top and bottom bolts, all necessary fixing
accessories, ironmongeries, lockset and stainless steel pull handle to glass door
including building in or cutting and pinning lugs, bedding frames in
waterproofed cement and sand (1:3) mortar and pointing with mastic and fix into position
Refer Drawing No. :- JAA/2413/KDN/IPSOM/D/DS/1.04, 1.05, 1.06, 1.07, 1.08, 1.09 & 1.10
A U-shaped composite glass wall overall size 2400mm + 1200mm + 1200mm x 2700m high comprising
of 1 no 1800mm x 300mm high fixed glass fixed top panel, 2 nos 300mm x 2700mm high and 2 nos
1200mm x 2700mm high side fixed panel with and including 1 no 1800mm x 2400mm high x 10mm
Thick frameless double leaf tempered glass door (ADW1)
1 No
B Composite glass wall overall size 5000mm x 2400mm high comprising of 2 nos 1100mm x 2400mm high
and 1 no 1000mm x 2400mm high side fixed panel with and including 1 no 1800mm x 2400mm high
x 10mm Thick frameless double leaf tempered glass door (ADW3)
1 No
C U-shaped fixed glass wall overall size 10900mm + 1000mm +1000mm x 2700mm high comprising
of 9 no 1200mm x 2700mm high panel and 2 nos 1000mm x 2700mm side panel (ADW5)
1 No
TO COLLECTION RM -
2/3
Refer Drawing No. :- JAA/2413/KDN/IPSOM/D/DS/1.04, 1.05, 1.06, 1.07, 1.08, 1.09 & 1.10 (Cont'd)
A L-shaped composite fixed glass wall overall size 2200mm + 1200mm x 2700mm high comprising of
1 no 1000mm x 300mm high fixed glass fixed top panel and 2 nos 1200mm x 2700mm high side
fixed panel with and including 1 no 1000mm x 2400mm high x 10mm Thick frameless single leaf
tempered glass door (ADW6)
1 No
B Composite fixed glass wall overall size 6640mm x 2700mm high comprising of 1 no 1000mm x
300mm high fixed glass fixed top panel, 3 nos 1200mm x 2700mm high and 2 nos 1020mm x 2700mm
high side fixed panel with and including 1 no 1000mm x 2400mm high x 10mm Thick frameless single
leaf tempered glass door (ADW7)
1 No
C Composite glass wall overall size 2835mm x 2400mm high comprising of 1 no 1000mm x 2400mm high x
10mm Thick frameless single leaf tempered glass door, 1 no 1235mm x 2400mm high and 1 no 600mm x
2400mm high side fixed panel (ADW8) 1 No
INTERNAL WALL FINISHES
Approved skim plaster system in accordance to manufacturer's instruction and Architect's approval :
D 5mm Thick skim plastering to wall 240 M2
TO COLLECTION RM -
2/4
INTERNAL WALL FINISHES (Cont'd)
ACOUSTIC WALL PANEL
A One layer of high-density non-woven fabric complete with one layer of 2mm thick sponge, 25mm thick
acoustic rockwool sound proofing insulation, all glued to 12mm thick plywood backing piece and
50mm x 25mm hard wood frame with heavy duty glue, 12mm x 20mm x 1.2mm thick brushed finished
stainless steel RHS as divider frame, 25mm x 63mm x 1.2mm thick brass finished stainless steel as
frame all around, including all necessary framing, and trimming to Architect's approval and all as
per all as per Architect's Drawing No. JAA/2413/KDN/PSOM/D/BM/1.12 as specified to :
B Wall, Overall size 1.75m x 2.30m high 8 No
C Wall, Overall size 1.20m x 2.30m high 3 No
LAMINATED TIMBER WALL FINISH
D Laminated timber wall finish comprising of selected oak wood coloured complete with plywood backing
and framework fixed to wall to architect's drawing and approval 65 M2
E Extra over for 50mm x 6mm thick back painted lining to architect's approval 22 M
F 100mm Wide aluminium strip lining in brass colour 54 M
FLUTTED WALL PANEL
G 25mm x 12mm wide x 12mm thick hardwood lining equally divided with painted finish up to 2700mm high
complete with LED strip light on both sides to Architect's approval and all as per all as per Architect's
Drawing No. JAA/2413/KDN/PSOM/ D/RMT/1.02 & 1.03 [Ruang Menyambut Tetamu]
8 M2
TO COLLECTION RM -
2/5
ALUMINIUM POWDER COATED VERTICAL FINS
A 25mm x 75mm Aluminium powder coated vertical fins fixed to laminated wall at 100mm centres up
to 2700mm high to Architect's approval and all as per all as per Architect's Drawing No.
JAA/2413/KDN/PSOM/D/RMT/1.02 & 1.03 [Ruang Menyambut Tetamu] 11 M2
PHOTOBOOTH BACKDROP
B 1000mm x 2700mm high reception backdrop panel fixed to laminated wall comprising of selected
50mm x 150mm deep x 0.8mm thick aluminium hairline brass finish frame surround, 700mm x
2400mm high x 20mm thick quartz stone finish panel all to architect's detail drawing and approval
[Ruang Menyambut Tetamu]
1 No
ARTIFICIAL PLANT WALL PANEL [AW]
C 2400mm x 2700mm high artifical plant panel attached to laminated wall comprising of selected 50mm x
150mm deep x 0.8mm thick aluminium hairline brass finish frame surround, 20mm thick x 300mm wide
quartz stone finish surround and an approved artificial plant fixed to 1500mm x 2000mm high panel
all to architect's detail drawing and approval [Ruang Menyambut Tetamu]
1 No
TO COLLECTION RM -
2/6
RECEPTION BACKDROP WITH QUARTZ STONE FINISH
Refer Drawings No:-
JAA/2413/KDN/IPSOM/D/RMT/1.03
A 3000mm x 2700mm high reception backdrop panel fixed to laminated wall comprising of selected
50mm x 150mm deep x 0.8mm thick aluminium hairline brass finish frame surround, 2700mm x
2400mm high x 20mm thick quartz stone finish panel all to architect's detail drawing and approval
[Ruang Menyambut Tetamu]
1 No
GLASS CLADDING
10mm thick back painted glass panel with 12mm thick plywood backing piece and 50mm
x 25mm hardwood frame up to 2700mm high, starting panel is 100mm high from floor
finish level and 50mm wide gap at 600mm centers onwards, to Architect's approval
and all as per all as per Architect's Drawing No. JAA/2413/KDN/PSOM/D/BPG/1.01 as specified to :
B Column 98 M2
GLASS PANEL
10mm thick back painted glass panel with 12mm thick plywood backing piece and 50mm
x 25mm hardwood frame to Architect's approval and all as per all as per
Architect's Drawing No. JAA/2413/KDN/PSOM/ D/KP/1.03 as specified to
C Wall [Pantri & Bilik Perbincangan Informal] 7 M2
TO COLLECTION RM -
2/7
WALL TILES
Approved 300mm x 600mm porcelain wall tiles bedded, jointed and pointed in
cement mortar (1:3) of approved design, colour and pattern on and including 20mm
thick cement and sand (1:3) backing screed as specified to :
A Wall [Tandas KE] 33 M2
PAINTING TO WALL
To supply and apply selected emulsion paint onto wall surface, in selected color
inclusive of 1 layer of undercoat and 2 layer of finished coat as specified to:
B Surfaces of plastered and partition wall 1819 M2
FROSTED STICKERS
C Approved PVC frosted glass stickers for privacy film cut to size in approved pattern onto glass
surfaces 58 M2
MAKE GOOD EXISTING WORK
Note:
The Contractor is required to visit the site to ascertain the nature, character and extent of this
Make Good Existing Works and any other conditions that may effect his rates. No reimbursement
in respect of claims arising out of Contractor's failure to comply with this clause will be entertained.
Prices for all works shall include the making good and reinstatement of damaged work caused by
their execution.
Prices for temporary screens, coverings, etc. shall include cost of their alterations, adaption and
movement on site during the progress of work.
TO COLLECTION RM -
2/8
Note: (Cont'd)
A Make good all existing wall at at entrance corridor (approximately 228m2) Item
PAINTING TO EXISTING WALL
Note:
All existing paint to be scrape off before applying new paint
To supply and apply selected emulsion paint onto wall surface, in selected color
inclusive of 1 layer of undercoat and 2 layer of finished coat as specified to:
B Surfaces of existing wall 525 M2
TO COLLECTION RM -
2/9
COLLECTION
Page No. 2/1 -
Page No. 2/2 -
Page No. 2/3 -
Page No. 2/4 -
Page No. 2/5 -
Page No. 2/6 -
Page No. 2/7 -
Page No. 2/8 -
Page No. 2/9 -
INTERNAL WALL AND INTERNAL WALL FINISHES
CARRIED TO SUMMARY RM -
2/10
ELEMENT NO 3 - INTERNAL FLOOR FINISHES
Notes:-
Select, supply, deliver, store, unwrap, assemble and install in position the following items. The contractor
shall make allowance for pattern repeats and wastages where required and to allow for adhesion,
termination strip and capping in matching colors and different materials
Prices for all works shall include the making good and reinstatement of existing surfaces to received new
finishes.
CARPET TILE [CT]
A To supply and install selected 600mm x 600mm Carpet Tile, to be laid in checkered style complete
with approved adhesive agent onto existing cement render surface 1472 M2
B Skirting; 100mm high x 12mm thick timber skirting including painting 596 M
C 3mm thick stainless steel divider 3 M
NON-SLIP HOMOGENOUS TILE [NHT-1]
Approved 300mm x 300mm non- slip homogenous floor tiles bedded, jointed and
pointed in cement mortar (1:3) of approved design, colour and pattern on complete
with skirting and including 20mm thick cement and sand (1:3) backing screed as specified :
D Floor [Ruang Makan, Pantri & Wuduk] 42 M2
E 100mm high skirting 38 M
TO COLLECTION RM -
3/1
ELEMENT NO 3 - INTERNAL FLOOR FINISHES (Cont'd)
Approved 300mm x 600mm non- slip homogenous floor tiles bedded, jointed and
pointed in cement mortar (1:3) of approved design, colour and pattern on complete
with skirting and including 20mm thick cement and sand (1:3) backing screed as specified :
A Floor [Tandas KE] 10 M2
B 50mm drop 1 M
Approved 600mm x 600mm homogenous floor tiles bedded, jointed and pointed in
cement mortar (1:3) of approved design, colour and pattern on complete with
skirting and including 20mm thick cement and sand (1:3) backing screed as specified
:
C Floor (Surau Wanita & Surau Lelaki) 20 M2
D Skirting; 100mm high x 12mm thick timber skirting including painting 27 M
WATERPROOFING
To supply and apply 2 coats of polymer modified flexible cementious waterproofing

agent onto floor surface, and from floor finish level up to as specified:
E Floor surface and up to 1500mm high Wall [Tandas Ketua Eksekutif] 26 M2
F Ditto, 1500mm high Wall [Wuduk] 16 M2
TO COLLECTION RM -
3/2
COLLECTION
Page No. 3/1 -
Page No. 3/2 -
INTERNAL FLOOR FINISHES
3/3
ELEMENT NO 4 - INTERNAL CEILING FINISHES
Notes:-
Refer to Specifications and Preambles to all trades for description of materials and workmanship and
general labour applicable to this Schedule/BQ.
Select, supply, deliver, store, unwrap, assemble and install in position the following items. The contractor
shall make allowance for pattern repeats and wastages where required and to allow for adhesion,
termination strip and capping in matching colors and different materials
GYPSUM BOARD CEILING
A To supply and install 9.5mm thick suspended gypsum board size 1200mm x 600mm to be fixed and
complete with and including approved T-channel aluminium frame in white colour suspension system
strictly as per manufacturer's instructionas, joist, to be plastered evenly inclusive fittings & accessories.
1200 M2
PLASTER CEILING
B 12mm Thick approved plasterboard ceiling fixed to and including 38mm x 14mm 'U' channel suspension
system as described and fixing all in accordance with manufacturer's instruction.
270 M2
C EXTRA OVER for 150mm wide shadow gap 31 M
D EXTRA OVER for 125mm wide x 100mm deep x 12mm thick lighting ceiling pelmet
33 M
E EXTRA OVER for 300mm wide ceiling (circular on plan)

20 m
F EXTRA OVER for 300mm wide vertical drop 33 M
G EXTRA OVER FOR 150mm wide vertical drop (circular on plan)

40 M
TO COLLECTION RM -
4/1
ELEMENT NO 4 - INTERNAL CEILING FINISHES (Cont'd)
PLASTER CEILING (Cont'd)
A 12mm Thick approved plasterboard ceiling as pelmet fixed to and including 38mm x 14mm 'U' channel
suspension system as described and fixing all in accordance with manufacturer's instruction. Overall
width between 125mm wide to 1,050mm wide 62 M2
B 300mm wide vertical drop to pelmet 11 M
C 150mm wide vertical drop to pelmet 141 M
D 12mm Thick approved moisture resistant plasterboard ceiling fixed to and including 38mm x 14mm 'U'
channel suspension system as described and fixing all in accordance with manufacturer's instruction.
10 M2
To supply and apply selected emulsion paint on to wall surface, in selected color inclusive of 1 layer of
undercoat and 2 layer of finished coat as specified to:
E To Gypsum Board 1200 M2
F To Plaster Ceiling 342 M2
G To Plaster Ceiling; 125mm wide x 100mm deep lighting ceiling pelmet 33 M
H To Plaster Ceiling; 300mm wide 31 M
J To Plaster Ceiling; 300mm wide vertical

drop 33 M
K To Plaster Ceiling; 150mm wide vertical 181 M

drop
L To soffit of slab - 150mm wide 17 M2
SERVICE MANHOLE
M To supply and install 600mm x600mm ceiling 8 NO

service manhole
TO COLLECTION RM -
4/2
ELEMENT NO 4 - INTERNAL CEILING FINISHES (Cont'd)
TESTING & INSPECTION
To carry out in-situ Pull-out Test for the anchors, the sampling rate shall be 5 samples for every 200
number of anchor installed to Architect's approval ITEM
TO COLLECTION RM -
4/3
COLLECTION
Page No. 4/1 -
Page No. 4/2 -
Page No. 4/3 -
INTERNAL CEILING FINISHES
4/4
ELEMENT NO.5 - INTERNAL DOORS
Notes:
Select, fabricate, supply, deliver, store, unwrap, assemble and install in position the following items.
SINGLE LEAF TIMBER FLUSH DOOR
A 40mm Thick single leaf waterproof plywood flush doors in approved laminate finish overall size 900mm x
1200mm high all as per Architect's details inclusive timber door frame, approved door hinges, lever type
handle and lockset, door closer, floor mounted door stopper, all necessary painting and other accessories
related [TYPE TD1]
3 NO
B 40mm Thick single leaf plywood flush doors in approved laminate finish overall size 1000mm x 2400mm
high all as per Architect's details inclusive timber door frame, approved door hinges, lever type handle
and lockset, door closer, floor mounted door stopper, all necessary painting and other accessories
related [TYPE TD2]
14 NO
C Ditto, 900mm x 2100mm high, ditto [TYPE TD6] 1 NO
D Ditto, 1000mm x 2400mm high with 700mm wide x 350mm high louvers opening at bottom, ditto [TYPE
TD3] 1 NO
TO COLLECTION RM -
5/1
DOUBLE LEAF TIMBER FLUSH DOOR
40mm Thick double leaf plywood flush doors in approved laminate finish overall size 2000mm x
2400mm high all as per Architect's details inclusive timber door frame, approved door hinges,
lever type handle and lockset, door closer, floor mounted door stopper, all necessary painting
and other accessories related [TYPE TD7]
3 NO
40mm Thick double leaf plywood flush doors in approved laminate finish overall size 2000mm x
2400mm high with 2 numbers of 750mm wide x 350mm high louvers opening at bottom diito [TYPE
TD3A] 1 NO
DOUBLE LEAF FRAMELESS TEMPERED GLASS DOOR
1800mm x 2400mm high x 10mm thick Frameless Tempered Glass Door with and including
approved floor spring, patch panel, lockset and other necessary fittings including stainless steel
pull door handle [TYPE GD] 1 NO
POWDER COATED ALUMINIUM SLIDING GLASS DOOR
Note : All details of the following powder coated aluminium door to be referred to Architect's drawing
and manufacturer's recommendation
TO COLLECTION RM -
5/2
ELEMENT NO.5 - INTERNAL DOORS (Cont'd)
Supply and fix the following of an approved powder coated aluminium frame
sliding door complete with frames, couplings, transomes, mullions, concealed
top and bottom bolts, push/pull handle, stays, lockset and all other fittings and
accessories including building in or cutting and pinning lugs, bedding frames
in waterproofed cement and sand (1:3) mortar and pointing with mastic.
A Sliding glass door size 6000mm x 2400mm high x 10mm thick tempered glass in 4 nos sliding panels
and 2 nos fixed panel with and including approved sliding gear, lockset and other necessary fittings
[Type ASD1] 1 NO -
B Ditto, size 4000mm x 2400mm high x 10mm thick tempered glass in 2 nos sliding panels and 2 nos
fixed panel, ditto [Type ASD2] 1 NO -
MAKE GOOD EXISTING WORK
Note:
their execution.
TO COLLECTION RM -
5/3
COLLECTION
Page No. 5/1 -
Page No. 5/2 -
Page No. 5/3 -
INTERNAL DOORS
5/4
ELEMENT NO.6 - WINDOWS
Notes:
Powder Coated Aluminium Window:
Note : All details of the following powder coated aluminium window to be referred to Architect's drawing
and manufacturer's recommendation -
Supply and install nominal thickness of 1.20mm - 1.30mm aluminium window frame
with aluminium frame extrusions complying to MS 2289 : 2010 completed with 10mm
thick clear glass glazing, all associated sub-frames and necessary hardware all in
accordance to the manufacturer's details and Architect's approval
FIXED GLASS WINDOW
A 1200mm x 2400mm high [TYPE W1] 13 NO
ROLLER BLIND
To supply and install selected roller blind with manual pully chain system
including track and other necessary fittings as specifIed :-
B 10900mm x 2700mm High [ADW5] 1 NO
C 5640mm x 2700mm High [ADW7] 1 NO
D 2400mm x 2700mm High [Existing window] 24 NO
E 1200mm x 2400mm High [TYPE W1] 13 NO
F 1200mm x 2700mm High [ADW6] 2 NO
G 1000mm x 2700mm High [ADW5] 2 NO
TO COLLECTION RM -
6/1
ELEMENT NO.6 - WINDOWS(Cont'd)
MAKE GOOD EXISTING WORK (ALL PROVISONAL)
Note:
their execution.
TO COLLECTION RM -
6/2
COLLECTION
Page No. 6/1 -
Page No. 6/2 -
WINDOWS
6/3
ELEMENT NO.7 - OFFICE FURNITURE SYSTEM
Notes:-
All exposed timber for built-in furniture is of selected Grade A timber/timber veneer ply with matching
grain and shade, free of large knots, splayed and dark spots.
All selected solid colour laminated finish to be of book-matched grain and shade. Only approved
laminated shall be used for fabrication.
All built-in lightings in built-in furniture are to be priced in this schedule. Type of built-in lighting
to refer to specifications
Supply and fix the following furniture and fitments including forming opening for M&E services
complete with finishes, fittings, iron mongery, light fittings and internal wiring and other
accessories to follow Architects' specification and detail drawings for complete installation
including all necessary fixing brackets and support frames inside partition or on plastered wall
OFFICE TABLE TYPE 1 [OT1]
A 2400mm x 900mm high working desk complete with 2100mm x 900mm x 650mm high attached side
return cabinet laminate finish in white oak including approved netbox as per Architect 's specification
and detail drawings [Bilik Ketua Eksekutif] 1 NO
B 2100mm x 800mm x 750mm high working desk laminate finish complete with 1300mm x 600mm x
650mm high attached side return cabinet, 404mm x 495mm x 725mm high fixed pedestal in white oak
including approved netbox as per Architect 's specification and detail drawings [Bilik TKE (K), Bilik TKE
(A)]
2 NO
TO COLLECTION RM -
7/1
ELEMENT NO.7 - OFFICE FURNITURE SYSTEM (Cont'd)
(Cont'd)
A 1800mm x 600mm + 2100mm x 800mm L-Shape working desk laminate finish complete with 410mm x
500mm x 635mm high mobile pedestal in white or darker oak including approved netbox as per Architect
's specification and detail drawings [Bilik Pengurus Pentadbiran, Bilik Pengurus G46-1, Bilik
Pengurus G46-2, Bilik Pengarah G48-1, Bilik Pengarah G48-2, Bilik Pengarah G52-1, Bilik
Pengarah G52-2]
7 NO
B Cluster of 4 - 1800mm x 600mm + 1650mm x 750mm L-Shape workstation laminate finish half glass
without raceway complete with 400mm x 480mm x 560mm high mobile pedestal in white oak including
approved netbox as per Architect 's specification and detail drawings [Ruang Pentadbiran]
5 NO
C Single - 1800mm x 600mm + 1650mm x 750mm L-Shape workstation laminate finish half glass without
raceway complete with 400mm x 480mm x 560mm high mobile pedestal in white oak including approved
netbox as per Architect 's specification and detail drawings [Bilik PA, Bilik PPT (EO)]
2 NO
TO COLLECTION RM -
7/2
COLLECTION
Page No. 7/1 -
Page No. 7/2 -
OFFICE FURNITURE SYSTEM

7/3
ELEMENT NO.8 - BUILT- IN FURNITURE
Notes:-
All exposed timber for built-in furniture is of selected Grade A timber/timber veneer ply with matching
grain and shade, free of large knots, splayed and dark spots.
-
All selected solid colour laminated finish to be of book-matched grain and shade. Only approved
laminated shall be used for fabrication.
All built-in lightings in built-in furniture are to be priced in this schedule. Type of built-in lighting
to refer to specifications
TO COLLECTION RM -
8/1
ELEMENT NO.8 - BUILT- IN FURNITURE (Cont'd)
All Built in Cabinet at Office
BUILT -IN CABINET 1 [BC1]
Built in Cabinet BC1 Refer Drawing No. :-
JAA/2413/KDN/IPSOM/D/BC/1.06, 1.07
A 3250mm + 2700mm x 600mm wide x 850mm high overall L-shaped built- in bottom counter cabinet in
selected oak wood coloured laminate finish with plywood backing comprising of 1 no 900mm x 850mm
high and 1 no 600mm x 850mm high open shelf, 1 no 550mm x 850mm high three layer drawers and 6
nos 600mm x 850mm high cabinet with two layer intermediate shelf and double door of selected white
coloured laminated finish and 100mm x 0.8mm thick aluminium skirting hairline brass finish fixed on
50mm x 100mm hardwood timber frame at bottom complete all as Architect's drawings and
manufacturer's detail [Bilik Cetak]
1 NO
TO COLLECTION RM -
8/2
(Cont'd)
JAA / 2413 / KDN / IPSOM / D / BPI / 1.02
A 4835mm x 600mm x 2700mm high overall kitchen cabinet in solid colour laminate finish complete with
plywood backing up to ceiling level comprising of 3695mm x 600mm x 850mm high bottom counter
cabinet constructed of 10 nos drawers 691mm length with various height and 1 no 1382mm x 750mm
high cabinet double door shelves finish with 20mm thick solid surface on top complete with ply backing
and framework, 4835mm x 450mm x 1250mm high top cabinet constructed of 6 nos open shelves in
various sizes and 1 no 1382mm x 1250mm high cabinet double door shelves and infill with 4835mm x
1025mm (average) x 10mm thick backpainted glass panel complete with 12mm plywood backing and
framework and 100mm x 0.8mm thick aluminium skirting hairline brass finish fixed on 50mm x 100mm
hardwood timber frame at bottom complete all as Architect's drawings [Bilik Perbincangan Informal]
1 NO
TO COLLECTION RM -
8/3
(Cont'd)
JAA / 2413 / KDN / IPSOM / D / KE / 1.06
A 3663mm + 1188mm x 500mm wide x 2700mm high overall built-in cabinet in selected oak wood coloured
laminate finish with plywood backing comprising of 1 nos 399mm x 750mm high, 3nos 917mm x 750mm
high, 3nos 917mm x 688mm high, 1 nos 917mm x 1262mm high, 1nos 688mm x 750mm high, 6nos
344mm x 416mm high and 2 nos 344mm x 588mm high single and double door shelf compartment with
door of selected high gloss piano paint finish with stainless steel press and released magnetic lockset
and 100mm x 0.8mm thick aluminium skirting hairline brass finish fixed on 50mm x 100mm hardwood
timber frame at bottom complete all as Architect's drawings and manufacturer's detail [Bilik Ketua
Eksekutif]
1 NO
TO COLLECTION RM -
8/4
(Cont'd)
JAA / 2413 / KDN / IPSOM / D / KE / 1.10
A 3000mm x 600mm wide x 2700mm high overall built-in cabinet in selected oak wood coloured laminate
finish with plywood backing comprising of 2 nos 744mm x 1541mm high, 2 nos 744mm x 759mm high, 4
nos 756mm x 759mm high single and double door shelf compartment with door of selected high gloss
piano paint finishr with stainless steel press and released magnetic lockset , 1512mm x 923mm high x
6mm thick bevelled edge quality mirror on 12mm thick waterproof plywood backing and silicone pointing
and 100mm x 0.8mm thick aluminium skirting hairline brass finish fixed on 50mm x 100mm hardwood
timber frame at bottom complete all as Architect's drawings and manufacturer's detail [Bilik Persalinan
Solat KE]
1 NO
TO COLLECTION RM -
8/5
(Cont'd)
JAA / 2413 / KDN / IPSOM / D / BS / 1.01
A 2662mm + 2162mm x 550mm wide x 2700mm high overall L-shaped built- in cabinet in selected oak
wood coloured laminate finish with plywood backing comprising of 1 no 900mm x 850mm high and 1
no 600mm x 850mm high open shelf, 1 no 550mm x 850mm high three layer drawers and 6 nos
600mm x 850mm high cabinet with two layer intermediate shelf and double door of selected
white coloured laminated finish and 100mm x 50mm thick stainless steel skirting hairline brass
finish fixed on 50mm x 100mm hardwood timber frame at bottom complete all as Architect's
drawings and manufacturer's detail [Bilik TKE (K)]
1 NO
TO COLLECTION RM -
8/6
(Cont'd)
JAA / 2413 / KDN / IPSOM / D / BS / 1.02,1.03
A 3887mm x 550mm x 2700mm high overall built-in cabinet in selected oak wood coloured laminate
finish with plywood backing comprising of 4 nos 849mm x 334mm high open shelf, 4 nos 979mm x
334mm high open shelf, 10 nos of double door shelf compartment in various sizes with door of selected
high gloss piano paint finish, selected 12mm thick plaster board partition on bothside and 'C'
channel galvanize frame at ceiling highand 100mm x 50mm thick stainless steel skirting hairline
brass finish fixed on 100mm x 50mm hardwood timber frame at bottom complete all as Architect's
drawings and manufacturer's detail [Bilik TKE (A)]
1 NO
TO COLLECTION RM -
8/7
(Cont'd)
JAA / 2413 / KDN / IPSOM / D / BS / 1.04
finish with plywood backing comprising of 15 nos of double door shelf compartment in various
sizes with door of selected high gloss piano paint finish, selected 12mm thick plaster board partition
on bothside and 'C' channel galvanize frame at ceiling high and selected skirting hairline in
stainless steel hairline brass finish fixed on 50mm x 100mm hardwood timber frame at bottom
complete all as Architect's drawings and manufacturer's detail [Bilik Pengarah G52-1, Bilik
Pengarah G52-2]
2 NO
TO COLLECTION RM -
8/8
(Cont'd)
JAA / 2413 / KDN / IPSOM / D / BS / 1.05
finish with plywood backing comprising of 6 nos of double door shelf compartment in various sizes
with door of selected high gloss piano paint finish, selected 12mm thick plaster board partition on
bothside and 'C' channel galvanize frame at ceiling high and selected skirting hairline in stainless
steel hairline brass finish fixed on 50mm x 100mm hardwood timber frame at bottom complete all as
Architect's drawings and manufacturer's detail [Bilik Pengurus G48
-1, Bilik Pengurus G48 -2, Bilik Pengurus G46, Bilik Pengurus Pentadbiran G46]]
4 NO
TO COLLECTION RM -
8/9
(Cont'd)
JAA / 2413 / KDN / IPSOM / D / BS / 1.06
A 1200mm x 500mm x 2700mm high overall built-in book shelf in selected oak wood coloured laminate
finish with plywood backing comprising of 14 nos open shelf in various sizes, 3 nos 389mm x 256mm
high drawers and 1 nos 811mm x 756mm high double door shelf compartment with door of selected
high gloss piano paint finish with stainless steel press and released magnetic lockset and 100mm x
0.8mm thick aluminium skirting hairline brass finish fixed on 50mm x 100mm hardwood timber
frame at bottom complete all as Architect's drawings and manufacturer's detail [Bilik Pengurus
Pentadbiran, Bilik Ketua Eksekutif, Bilik Pengurus G48 -1, Bilik Pengurus G48 -2 ]
4 NO
TO COLLECTION RM -
8/10
(Cont'd)
KITCHEN CABINET 1 [KC1]
Kitchen Cabinet KC1 Refer Drawing No. :-
JAA/2413/KDN/IPSOM/D/KP/1.01 to 1.02
A 3975mm x 600mm x 2700mm high overall kitchen cabinet in solid colour laminate finish complete with
plywood backing up to ceiling level comprising of 3338mm x 600mm x 850mm high bottom counter
cabinet constructed of 10 nos drawers 694mm length with various height and 1 no 1200mm x
750mm high cabinet double door shelves finish with 20mm thick solid surface on top to receive
kitchen sink and tap (measured separately), 3975mm x 450mm x 1250mm high top cabinet
constructed of 6 nos open shelves in various sizes and 1 no 1200mm x 1250mm high cabinet double
door shelves and infill with 3975mm x 1025mm (average) x 10mm thick backpainted glass panel
complete with 12mm plywood backing and framework and 100mm x 0.8mm thick aluminium skirting
hairline brass finish fixed on 50mm x 100mm hardwood timber frame at bottom complete all
as Architect's drawings [Ruang Makan]
1 NO
TO COLLECTION RM -
8/11
(Cont'd)
DISPLAY CABINET TYPE1 [DC1]
Refer Drawing No. :- JAA/2413/KDN/IPSOM/D/BM/1.08 and 1.09
A 7250mm x 600mm x 2700mm high overall display cabinet in selected oak wood coloured laminate
finish with plywood backing comprising of 6 nos 558mm x 550mm high open shelf, 2 nos 558mm x
650mm high single door shelf compartment , 5 nos 1117mm x 650mm high double door shelf
compartment , 2 nos 1117mm x 1650mm high double door shelf compartment with 6mm thick fixed
clear glass door with stainless steel hinges, 3000mm x 1200mm x 10mm thick backpainted glass
panel with 5mm plywood backing piece, 15mm x 15mm x 120mm & 10mm x 10mm x 60mm font of
'KEMENTERIAN DALAM NEGERI, INSTITUT KESELAMATAN AWAM MALAYSIA (IPSOM)' in
aluminium hairline glossy silver finish and selected skirting in aluminium hairline brass finish
fixed on 50mm x 100mm hardwood timber frame at bottom complete all as Architect's drawings and
manufacturer's detail [Bilik Mesyuarat]
1 NO
TO COLLECTION RM -
8/12
(Cont'd)
Refer Drawing No. :- JAA/2413/KDN/IPSOM/D/BM/1.10
A 7250mm x 600mm x 2700mm high overall presentation cabinet in selected oak wood coloured
laminate finish with plywood backing comprising of 2 nos 1167mm x 1650mm x 10mm thick back
painted fixed glass panel writing board, 2 nos 1167mm x 1650mm x 10mm thick sliding glass panel
writing board with 12mm thick plywood backing piece, 2 nos 564mm x 650mm high single door shelf
compartment and 3nos 1117mm x 650mm high double door shelf compartment with 6mm thick
fixed clear glass panel and selected skirting in aluminium hairline brass finish fixed on 50mm x
100mm hardwood timber frame at bottom complete all as Architect's drawings and manufacturer's
detail [Bilik Mesyuarat]
1 NO
TO COLLECTION RM -
8/13
(Cont'd)
ISLAND BAR TABLE WITH SIDE AND UPPER PANEL [IT]
Refer Drawings No:- JAA/2413/KDN/IPSOM/D/BPI/1.01 -1.03
A 3000mm x 900mm x 2700mm high island bar table comprising of 2700mm x 900mm x 150mm thick bar
table with 20mm solid surface finish complete with plywood backing bar table with solid colour
laminated finish sides panel 900mm x 2700mm high bothsides and 3000mm x 900mm x 200mm thick
upper panel and framework to contractor's detail and solid colour laminate finish complete with plywood
backing and framework up to ceiling finish level including 3 nos hanging lights complete with wiring
all accordance to Architect's drawings [Bilik Perbincangan Informal]
1 NO
TO COLLECTION RM -
8/14
(Cont'd)
MAIN MEETING TABLE [MT1]
Refer Drawings No:-
JAA / 2413 / KDN / IPSOM / D / BM / 1.05, 1.06, 1.07
A 10100mm x 1800mm x 750mm high meeting table in selected oak wood coloured solid surface
laminated finish table top complete with plywood backing comprising with microphone with push
switch button refer to manufacturer's detail and specification 6mm thick clear glass at middle on
table top, 25mm x 50mm hardwood frame, 50mm x 75mm x 4mm thick rectangular hollow section
stainless steel frame, 75mm diameter square hollow section stainless steel table stand post, 75mm
diameter square hollow section stainless steel table stand support, 2 nos. 6mm thick clear glass
cover complete with press and release magnetic lock set, 3 pin plug point under table top 300mm x
250mm plug point compartment, mild steel frame and protective screen with anti-rust black painted
as Architect's drawings [Bilik Mesyuarat]
1 NO
TO COLLECTION RM -
8/15
(Cont'd)
MEETING TABLE [MT2]
Refer Drawings No:-
JAA / 2413 / KDN / IPSOM / D / BM / 1.05, 1.06, 1.07
A 9100mm x 750mm x 750mm high meeting table in selected oak wood coloured solid surface
laminated finish table top complete with plywood backing comprising with 25mm x 50mm hardwood
frame, 50mm x 75mm x 4mm thick rectangular hollow section stainless steel frame, 75mm
diameter square hollow section stainless steel table stand post, 75mm diameter square hollow
section stainless steel table stand support, 2 nos. 6mm thick clear glass cover complete with press
and release magnetic lock set, 3 pin plug point under table top 300mm x 250mm plug point
compartment, mild steel frame and protective screen with anti-rust black painted as Architect's
drawings [Bilik Mesyuarat]
2 NO
GLASS WRITTING BOARD [GW]
JAA / 2413 / KDN / IPSOM / D / BL / 1.05and 1.06
B 4576mm x 1200mm high glass writing board comprising of 2977mm x 1200mm high glass writing board
and 2 nos 800mm x 1200mm high shelf compartment both sides complete with 12mm thick plywood
backing piece at 1950mm hieght to architect's approval [Bilik Latihan]
2 NO
TO COLLECTION RM -
8/16
(Cont'd)
RECEPTION FRONT DESK [RFD]
Refer Drawings No:-
JAA/2413/KDN/IPSOM/D/RMT/1.04
A 4150mm +450mm x 800mm-900mm x 1200mm high overall size L- shape Kaunter Penyambut
Tetamu constructed of 700mm wide x 20mm thick pearl white solid surface top on 750mm high
drawers and shelves, 450mm high backsplash with 250mm wide top counter, front cover consisting
of backpainted quality mirror on ply backing and 25mm wide timber strip painted finish, 100mm x
0.8mm thick stainless steel kick plate in hairline finish complete with ply backing and timber framing
including hidden LED strip for under cabinet lighting and 2 nos Netbox - 2gang + wire tray + starter
cable, wiring all accordance to Architect's drawings and approval [Ruang Menyambut Tetamu]
1 NO
TO COLLECTION RM -
8/17
COLLECTION
Page No. 8/1 -
Page No. 8/2 -
Page No. 8/3 -
Page No. 8/4 -
Page No. 8/5 -
Page No. 8/6 -
Page No. 8/7 -
Page No. 8/8 -
Page No. 8/9 -
Page No. 8/10 -
Page No. 8/11 -
Page No. 8/12 -
Page No. 8/13 -
Page No. 8/14 -
Page No. 8/15 -
Page No. 8/16 -
Page No. 8/17 -
BUILT-IN FURNITURE
8/18
ELEMENT NO.10 : SANITARY FITTINGS
Notes:-
Select, supply, deliver, store, unwrap, assemble and install in position the following items.
WATER CLOSET [PWC]
A The Gap' or approved equivalent closed coupled washdown dual outlet complete with 3/4.5 litre dual flush
cistern and cover, 'S' or 'P' trap, self closing hinged seat and cover, 12" PVC reinforced flexible hose with
stainless steel plated brass nut and including all fixing and making all connection
1 NO
WALL MOUNTED MIRROR
B Supply and install 1600mm x 900mm high x 8mm thick frameless wall mounted mirror with 25mm
beveled edge all around complete with 50mm backing frame in marine ply (water proof ply) and LED line
lighting with aluminium casing and acrylic cover 1 NO
COUNTER TOP BASIN [AWB]
C Approved Slim Rectangular Counter top Basin complete with brass push up pop up waster, basin bottle
trap, and single lever basin tap 1 NO
TO COLLECTION RM -
10/1
ELEMENT NO.10 : SANITARY FITTINGS (Cont'd)
WATER HEATER [WH]
A 'SB11ip-RS' or approved equivalent stepless electronic power control water heater complete with
rotatable rainshower 8" with 3.8" showerhead (pat.pending), 5 spray showerhead, slim and chromed
slider bar with shower diverter, and including all fixing and making all connection. Safety features
should come with thermostat with safety cut-out, single polo EELS system with 10mA sensitivity,
IP25 splash proof casing and SVF valve with built-in filter.
1 NO
STAINLESS STEEL SINK [SSS]
B 'Metalco MS42/18' or approved equivalent stainless steel double bowl sink with single drainer
complete with 1/2" deck mounted sink tap with swivel spout, plastic bottle trap, and including all
fixing and making all connection. 1 NO
HAND HELD BIDET SET [HSB]
C Approved Hand bidet set complete with hand bidet, 1.20 m length double interlock chrome flexible
hose, brass chrome and wall mounted bracket, brass chrome 1/2" angle valve, and 1/2 " chrome
single lever angle valve with flange 1 NO
ABLUTION TAP [AT]
D Selected 1/2 " ablution tap come with wall flange 4 NO
PAPER HOLDER [PH]
E Selected paper holder with cover in polished finish 1 NO
FLOOR TRAP [FFT]
Approved 130mm x 130mm Johnson Suisse or approved equivalent Marble / Granite /

Ceramic tile drainage
F [Tandas KE & Pantri] 2 NO
TO COLLECTION RM
10/2
Description Qty Unit
ELEMENT NO.10 : SANITARY FITTINGS (Cont'd)
FLOOR TRAP [FT]
Approved 150mm x 150mm Stainless Steel Floor Trap ( SUS 304) with Anti Insect
A [Wuduk Lelaki & Perempuan] 2 NO
STAINLESS STEEL RAIL
Approved 1200mm long x 200mm wide x 20mm Stainless Steel Rail
B [Wuduk Lelaki & Perempuan] 2 NO
TO COLLECTION RM -
10/3
COLLECTION
Page No. 10/1 -
Page No. 10/2 -
Page No. 10/3 -
SANITARY FITTINGS
10/4
ELEMENT NO.11 - BUILDERS WORKS IN SERVICES
Notes:
VANITY TOP
To construct and complete 150mm thick reinforced concrete vanity top complete with lintol, solid surface
finish, plastered and fixing and connection of porcelain basin (measured separately)
A [Tandas Ketua Eksekutif] 1 NO
ABLUTION KERB
To construct and complete 1500mm x 300mm wide x 150mm high reinforced concrete ablution kerb
complete with tiles finish
B [Surau Lelaki & Perempuan] 2 NO
TO COLLECTION RM -
11/1
COLLECTION
Page No. 11/1 -
BUILDERS WORKS IN SERVICES
11/2
ELEMENT NO. 12 - SIGNAGES
Fabricate, supply, deliver, store, unwrap, assemble, install and place in position the following items as per
Architects' drawings and specifications
Lettering and numbering shall be Roboto CN and Roboto BK font as specified
Aluminium Plate Room Sign
400mm x 120mm x 5mm Thick aluminium plate signage with horizontal base slot plate to manufacturer's
detail comprising of Jata logo and numbering using acid etching method and 'Kementerian Dalam Negeri
(IPSOM)' lettering and Officer/Room name with 80 micron thick 3M sticker grey matte colour using
solvent arcylic adhesive complete with base plate screw to door/wall
A To Officer room 12 NO
B To Common room 15 NO
Main Lobby Lettering and Logo
C 30mm Thick stainless steel hairline overall size 700mm x 500mm high for 'JATA NEGARA' 1 NO
D 30mm Thick stainless steel black matte powder coated 3D lettering 150mm high for 'INSTITUT
KESELAMATAN AWAM MALAYSIA' 1 NO
E 20mm Thick stainless steel black matte powder coated 3D lettering 100mm high for 'KEMENTERIAN
DALAM NEGERI' 1 NO
Photobooth Lettering and Logo
F 30mm Thick stainless steel hairline overall size 700mm x 500mm high for 'JATA NEGARA' 1 NO
G 30mm Thick stainless steel black matte powder coated 3D lettering 120mm high for 'IPSOM'
1 NO
H 20mm Thick stainless steel black matte powder coated 3D lettering 120mm high for 'KDN' 1 NO
TO COLLECTION RM -
12/1
ELEMENT NO. 12 - SIGNAGES (Cont'd)
Main Entrance Ipsom Lettering
A 30mm Thick stainless steel black matte powder coated 3D lettering 165mm high for 'IPSOM'
1 NO
B 20mm Thick stainless steel black matte powder coated 3D lettering 105mm high for 'KEMENTERIAN
DALAM NEGERI' 1 NO
TO COLLECTION RM -
12/2
COLLECTION
Page No. 12/1 -
Page No. 12/2 -
SIGNAGES
12/3
SUMMARY
INTERNAL WALL AND INTERNAL WALL FINISHES 2/10 -
NTERNAL FLOOR FINISHES 3/3 -
INTERNAL CEILING FINISHES 4/4 -
INTERNAL DOORS 5/4 -
WINDOWS 6/3 -
OFFICE FURNITURE SYSTEM 7/3 -
BUILT-IN FURNITURE 8/18 -
SANITARY FITTINGS 10/4 -
BUILDERS WORKS IN SERVICES 11/2 -
SIGNAGES 12/3 -
TOTAL AMOUNT TO FORM OF TENDER -

B2/SUM
Bill No. 3 - Renovation to Library
Item Description Qty Unit Rate Amount
BILL NO. 3 - RENOVATION TO LIBRARY ELEMENT NO.1 - DEMOLITION

WORKS
Note:
This Bill is to be read in conjunction with the Specification, Preliminaries and

Preambles to all Elements attached.
Attention is drawn to the existing site conditions. All Tenderers are advised to
make a careful study of the working area including storage spaces for
materials, stores, sheds, working yards, and etc.
The Contractor is required to visit the site to ascertain the nature, character
and extent of this Demolition/Restoration Works and any other conditions that
may effect his rates. No reimbursement in respect of claims arising out of
Contractor's failure to comply with this clause will be entertained.
The Contractor is to provide extra precautionary measure during the hacking

work to prevent damages to existing structures including finishing works.
All materials arising from the works described in this section of the Bill except
where described as to be 'set aside for reuse' or 'and hand over to
Superintending Officer (S.O).' shall become the property of the Contractor who
shall remove them from site and allow for credit.
Prices for structural alterations shall include allowance for supporting all
adjacent works to prevent damage and for dismantling and removing all
temporary works and making good damage to the permanent works.
Prices for all works shall include the making good and reinstatement of
damaged work caused by their execution.
Prices for temporary screens, coverings, etc. shall include cost of their
alterations, adaption and movement on site during the progress of work.
Total carried to collection page -
1/1
ELEMENT NO.1 - DEMOLITION WORKS (Cont'd)

Note: (Cont'd)
(REMOVE FROM SUBCON SCOPE OF WORKS)
A Allow for provision of temporary Item
disconnecting all existing power supply
and water supply, protect the works for
the whole construction period and upon
completion make all connection to new or
existing fittings all to the satisfaction
of the S.O.
WALL PARTITION
B Item
Carefully dismantle and take down existing
wall partitions including all fixed glass
panels, built-in furnitures attached to
walls and other related works, load and
cart away from site all debris to
Contractor's own dump including making
good all works disturbed all to the
satisfaction of the S.O. (Approximately
285m2)
FLOOR FINISHES
C Item
Carefully strip off existing carpet
including underlay and other related
works, load and cart away from site all
debris to Contractor's own dump including
making good all works disturbed all to the
satisfaction of the S.O. (Approximately
504m2)
CEILING FINISHES
D Item
Carefully dismantle and take down existing
ceiling including all framing and other
related works, load and cart away from
site all debris to Contractor's own dump
including making good all works disturbed
all to the satisfaction of the S.O.
(Approximately 504m2)
1/2
DOORS
A Item
Carefully dismantle and take down existing single leaf door including all
ironmongeries and other related works, load and cart away from site all debris
to Contractor's own dump including making good all works disturbed all to the
satisfaction of the S.O. (Approximately 20nos)
BUILT IN & LOOSE FURNITURE
B Carefully dismantle, load and cart away from site all built in & loose furniture to Item
Contractor's own dump including making good all works disturbed all to the
satisfaction of the S.O.
1/3
COLLECTION
Page No. 1/1 -
Page No. 1/2 -
Page No. 1/3 -
DEMOLITION WORKS
Carried To Summary -
1/4
INTERNAL WALL
Notes:
Refer to Drawings, Specifications and Preambles to all trades for description

of materials and workmanship and general labour applicable to this
Schedule/BQ.
All timber used must dri-con and tanalised with treatment certificates. All metal
elements must hot-dipped galvanised unless otherwise stated. For exposed
metal elements, they shall be in selected paint finish.
All metal and steel elements exposed to the weather must be hot dip
galvanised to
85 microns with 20 years warranty. All metal and steel elements not exposed
to the weather eventhough covered with finishing material must have painting
protection with 10 years warranty as specified, all to the Architect's approval.
All steelwork shall be completed with all necessary base plate, connection
plate, shoes, bolts, grouting and etc, The Tenderer's price shall include all of
the above mentioned.
The Contractor to note all structural steel works specified below or elsewhere
in this Bills of Quantities to be factory fabricated and shop primed with One
Coats of Micaceous Iron Oxide Paint all in accordance with Manufacturer's
instruction and Architect's approval.
The Contractor to note all structurall shal be to soffit beam.
The Contractor to include in the tender price for all the above cost in
compliance thereof.
2/1

(Cont'd)
PLASTER BOARD PARTITION
A 205 M2 - -
To construct and complete 100mm thick drywall up to soffit of slab with
approved gypsum board partition comprising 3" metal stud frame and nailed to
floor and anchored to sofit slab, galvanised 'C' channel frame at ceiling height
complete with 12mm thick plaster board on bothsides including polyfiller finish
to all joint and ready to received new finishes
B 34 M2 - -
To construct and complete 100mm thick drywall up to soffit of slab with
approved sound proof gypsum board partition with 1 layer rockwool
soundproofing comprising 3" metal stud frame and nailed to floor and
anchored to sofit slab, galvanised 'C' channel frame at ceiling height, complete
with 12mm thick plaster board on bothsides including polyfiller finish to all joint
and ready to received new finishes
2/2

(Cont'd)
GLASS WALL
Powder coated aluminium frame 8mm thick tempered glass wall complete with
frames, couplings, transomes, mullions, concealed top and bottom bolts, all
necessary fixing accessories, ironmongeries, lockset and stainless steel pull
handle to glass door including building in or cutting and pinning lugs, bedding
frames in waterproofed cement and sand (1:3) mortar and pointing with mastic
and fix into position
Refer Drawing No. :- JAA/2413/KDN/IPSOM/D/DS/1.04, 1.05, 1.06,

1.07, 1.08, 1.09 & 1.10
A 1 No.
U-shaped composite glass wall overall size 2400mm + 1200mm + 1200mm x
2700m high comprising of 1 no 1800mm x 300mm high fixed glass fixed top
panel, 2 nos 300mm x 2700mm high and 2 nos 1200mm x 2700mm high side
fixed panel with and including 1 no 1800mm x 2400mm high x 10mm Thick
frameless double leaf tempered glass door (ADW1)
INTERNAL WALL FINISHES
LAMINATED TIMBER WALL FINISH
B Laminated timber wall finish comprising of selected oak wood coloured 10 M2

complete with plywood backing and framework fixed to wall to architect's
drawing and approval
2/3

(Cont'd)
LIBRARY BACKDROP
Refer Drawings No:- JAA/2413/KDN/IPSOM/D/P/1.03

A 3000mm x 2700mm high reception backdrop panel fixed to laminated wall 1 No
comprising of selected 50mm x 150mm deep x 0.8mm thick aluminium hairline
brass finish frame surround, 2 nos 2700mm x 700mm high 10mm thick
backpainted mirror panel and 2700mm x 1000mm high information board all to
architect's detail drawing and approval
GLASS CLADDING
10mm thick back painted glass panel with 12mm thick plywood backing piece
and 50mm x 25mm hardwood frame up to 2700mm high, starting panel is
100mm high from floor finish level and 50mm wide gap at 600mm centers
onwards, to Architect's approval and all as per all as per Architect's Drawing
No. JAA/2413/KDN/PSOM/D/BPG/1.01 as specified to
B Column 28 M2
TIMBER LOUVER DIVIDER PANEL
C Timber louvers divider panel comprising of 50mm x 150mm x 2700mm high 11 M2

wood slat at 100mm centre bottom end fixed to floor as including all necessary
painting works to architect approval.
PAINTING TO WALL
To supply and apply selected emulsion paint onto wall surface, in selected 468 M2
color inclusive of 1 layer of undercoat and 2 layer of finished coat as specified
to:
D Surfaces of plastered and partition wall
2/4

(Cont'd)
FROSTED STICKERS
A Approved PVC frosted glass stickers for privacy film cut to size in approved 8 M2 - -
pattern onto glass surfaces
PAINTING TO EXISTING WALL
Note:
All existing paint to be scrap off before applying new paint
All painting work shall be flush with skim coat to joint gypsum board
Note:
All existing paint to be scap off before applying new paint
To supply and apply selected emulsion paint onto wall surface, in selected
to:
B Surfaces of existing wall 146 M2 - -
2/5
COLLECTION
Page No. 2/1 -
Page No. 2/2 -
Page No. 2/3 -
Page No. 2/4 -
Page No. 2/5 -
INTERNAL WALL AND INTERNAL WALL FINISHES
2/6
ELEMENT NO 3 - INTERNAL FLOOR FINISHES
Notes:-

Schedule/BQ.
Select, supply, deliver, store, unwrap, assemble and install in position the
following items. The contractor shall make allowance for pattern repeats and
wastages where required and to allow for adhesion, termination strip and
capping in matching colors and different materials
existing surfaces to received new finishes.
CARPET TILE [CT]
A To supply and install selected 600mm x 600mm Carpet Tile, to be laid in 504 M2 - -
checkered style complete with approved adhesive agent onto existing cement
render surface
B 245 M - -
Skirting; 100mm high x 12mm thick timber skirting including painting
3/1
COLLECTION
Page No. 3/1 -
INTERNAL FLOOR FINISHES
3/2
Notes:-
Refer to Specifications and Preambles to all trades for description of materials

and workmanship and general labour applicable to this Schedule/BQ.
following items. The contractor shall make allowance for pattern repeats and
wastages where required and to allow for adhesion, termination strip and
capping in matching colors and different materials
GYPSUM BOARD CEILING
A To supply and install 9.5mm thick suspended gypsum board size 1200mm x 495 M2
600mm to be fixed and complete with and including approved t-channel
aluminium frame in white colour suspension system strictly as per
manufacturer's instructionas, joist, to be plastered evenly inclusive fittings &
accessories.
PLASTER CEILING
B 12mm Thick approved plasterboard ceiling fixed to and including 38mm x 10 M

14mm 'U' channel suspension system as described and fixing all in
accordance with manufacturer's instruction.
To supply and apply selected emulsion paint on to wall surface, in selected

to:
C To Gypsum Board 495 M2
D To Plaster Board 10 M
------------------- SERVICE MANHOLE
E To supply and install 600mm x600mm ceiling service manhole 2 No
4/1

(Cont'd)
TESTING & INSPECTION
A Item
To carry out in-situ Pull-out Test for the anchors, the sampling rate shall be 5
samples for every 200 number of anchor installed to Architect's approval
4/2
COLLECTION
Page No. 4/1 -
Page No. 4/2 -
INTERNAL CEILING FINISHES
4/3
Notes:

Schedule/BQ.
Select, fabricate, supply, deliver, store, unwrap, assemble and install in

position the following items.
A 40mm Thick single leaf plywood flush doors in approved laminate finish overall 8 No
size 1000mm x 2400mm high all as per Architect's details inclusive timber
door frame, approved door hinges, lever type handle and lockset, door closer,
floor mounted door stopper, all necessary painting and other accessories
related [TYPE TD2]
MAKING GOOD EXISTING WORK (ALL PROVISONAL)
Note:
and extent of this Make Good Existing Works and any other conditions that
B Make good and repaint all existing door (approximately 3 numbers of door; 1 Item
single; 2 double door)
5/1
COLLECTION
Page No. 5/1 -
INTERNAL DOORS
5/2
ELEMENT NO.6 - WINDOWS
Notes:

Schedule/BQ.
Powder Coated Aluminium Window:
Note : All details of the following powder coated aluminium window to be

referred to Architect's drawing and manufacturer's recommendation
Supply and install nominal thickness of 1.20mm - 1.30mm aluminium window

frame with aluminium powder coated frame extrusions complying to MS 2289 :
2010 completed with 10mm thick clear glass glazing, all associated sub-
frames and necessary hardware all in accordance to the manufacturer's
details and Architect's approval
FIXED GLASS WINDOW
A 3600mm x 2400mm high in three equal panels [TYPE W2] 1 No
B 1100mm + 1100mm x 2400mm high L-corner window [TYPE W3] 1 No
ROLLER BLIND
To supply and install selected roller blind with manual pully chain system
including track and other necessary fittings as specified :-
C 2400mm x 2700mm high [Existing window] 5 No
D 3600mm x 2400mm high [TYPE W2] 1 No
E 1100mm x 2400mm high [TYPE W3] 2 No
6/1
ELEMENT NO.6 - WINDOWS (Cont'd)
MAKE GOOD EXISTING WORK (ALL PROVISONAL)
Note:
and extent of this Make Good Existing Works and any other conditions that
A Item
Make good all existing window (approximately 5 numbers of window)
6/2
COLLECTION
Page No. 6/1 -
Page No. 6/2 -
WINDOWS
6/3
ELEMENT NO.7 - OFFICE FURNITURE SYSTEM
Notes:-
All exposed timber for built-in furniture is of selected Grade A timber/timber

veneer ply with matching grain and shade, free of large knots, splayed and
dark spots.
All selected solid colour laminated finish to be of book-matched grain and

shade. Only approved laminated shall be used for fabrication.
All built-in lightings in built-in furniture are to be priced in this schedule. Type
of built-in lighting to refer to specifications
Supply and fix the following furniture and fitments including forming opening
for M&E services complete with finishes, fittings, iron mongery, light fittings
and internal wiring and other accessories to follow Architects' specification and
detail drawings for complete installation including all necessary fixing brackets
and support frames inside partition or on plastered wall
A 2 No
Cluster of 2 - 1800mm x 600mm + 1650mm x 750mm L-Shape workstation
laminate finish half glass without raceway complete with 400mm x 480mm x
560mm high mobile pedestal in white oak including approved netbox as per
Architect 's specification and detail drawings [Ruang Pejabat]
B 1 No
Single - 1800mm x 600mm + 1650mm x 750mm L-Shape workstation
laminate finish half glass without raceway complete with 400mm x 480mm x
560mm high mobile pedestal in white oak including approved netbox as per
Architect 's specification and detail drawings [Bilik Pepustakawan]
7/1
COLLECTION
Page No. 7/1 -
OFFICE FURNITURE SYSTEM
7/2
ELEMENT NO.8 - BUILT - IN FURNITURE
Notes:-
All exposed timber for built-in furniture is of selected Grade A timber/timber

veneer ply with matching grain and shade, free of large knots, splayed and
dark spots.
All selected solid colour laminated finish to be of book-matched grain and

shade. Only approved laminated shall be used for fabrication.
All built-in lightings in built-in furniture are to be priced in this schedule. Type
of built-in lighting to refer to specifications
8/1
ELEMENT NO.8 - BUILT - IN FURNITURE (Cont'd)
and support frames inside partition or on plastered wall
All Built in Cabinet at Library
Built in Cabinet BC7 Refer Drawing No. :- JAA / 2413 / KDN / IPSOM / D /
BS / 1.04
A 1 No
2462mm x 550mm x 2700mm high overall built-in cabinet in selected oak
wood coloured laminate finish with plywood backing comprising of 15 nos of
double door shelf compartment in various sizes with door of selected high
gloss piano paint finish, selected 12mm thick plaster board partition on
bothside and 'C' channel galvanize frame at ceiling high and selected skirting
hairline in stainless steel hairline brass finish fixed on 50mm x 100mm
hardwood timber frame at bottom complete all as Architect's drawings and
manufacturer's detail [Kaunter]
8/2
and support frames inside partition or on plastered wall (Cont'd)
Refer Drawing No. :-
JAA / 2413 / KDN / IPSOM / D / P / 1.06
A 1 No
4075mm x 450mm x 2700mm high overall display cabinet in selected oak

wood coloured laminate finish with plywood backing comprising of 4 nos
694mm in various high open shelf with 12mm thick glass partition in between,
2 nos high gloss piano finish paint door complete with plywood backing with
stainless hinges and press & release magnetic lock set comprising size of
334mm x 1689mm high and 320mm x 1689mm high door, 2400mm x 750mm
x 10mm thick tempered glass white board with 6.5 inch (2m x 2m) manual wall
screen projector, 4075mm x 789mm high bottom cabinet in selected oak wood
coloured laminate fluted door complete wiith plywood backing with stainless
steel hinges and press & release magnetic lockest door, 100mm x 0.8mm
thick aluminium skirting hairline brass finish fixed on 50mm x 100mm
hardwood base frame all Architect's drawings and manufacturer's detail [Bilik
Multimedia]
8/3
JAA / 2413 / KDN / IPSOM / D / P / 1.10
A 1 No
1900mm x 330mm x 230mm high hanging drawer cabinet in selected oak
wood colour laminate finish with plywood backing complete with steel bracket
and heavy duty soft closing ball bearing extension drawer slide all as
Architect's drawings and manufacturer's detail (Bilik Perbincangan)
RAK BUKU 1 [RB1]
JAA / 2413 / KDN / IPSOM / D / P / 1.14
B 4 No
2250mm x 390mm x 1460mm high overall rak buku in 9 nos equal
compartment size 750mm x 487mm high constructed of 19mm x 19mm x
1mm square hollow steel base in brass colour epoxy coated in selected oak
wood coloured laminate finish with plywood backing all as Architect's drawings
and manufacturer's detail [Ruang Koleksi/ Ruang Bacaan]
RAK BUKU 2 [RB2]

C 9 No
2725mm x 450mm x 2000mm high overall high quality cold rolled steel in oak
wood and cream white finish rak buku all as Architect's drawings and
manufacturer's detail [Ruang Koleksi/ Ruang Bacaan]
8/4
EXISTING RAK BUKU 2 [RB2]
A Dismantle, relocate and install existing Rak Buku 2 from existing KDN's librray 9 No
at Block D1, level 1 to our site as per Architect's approval. [Ruang Koleksi &
Bilik Khas Rujukan Terhad]
DISPLAY BOX TYPE1 [DB1]
JAA / 2413 / KDN / IPSOM / D / P / 1.12
B 2 No
600mm x 600mm x 1420mm high overall display box with 200kg heavy duty
50mm PU swivel castor wheels constructed of 1 no of 600mm x 600mm x
880mmm high x 8mm thk clear showcase box with protection sticker complete
with 12mm thick perspec sheet stand with 1mm black suade top wrap around,
600mm x600mm x 450mm high door in selected laminate surface finish door
complete with plywood backing with stainless steel hinges and press &
release magnetic lock set, 50mm x 0.8mm thick aluminium skirting hairline
gloss finish fixed on 50mm x 25mm hardwood base frame all as Architect's
drawings and manufacturer's detail [Ruang Pameran]
8/5
DISPLAY BOX TYPE2 [DB2]
JAA / 2413 / KDN / IPSOM / D / P / 1.13

A 1 No
2350mm x 500mm x 1000mm high overall display box with 200kg heavy duty
50mm PU swivel castor wheels constructed of 1 no of 500mm x 500mm x
200mmm high x 8mm thk clear arcylic box with protection sticker complete
with 12mm thick solid surface finish as base with 1mm black suade top wrap
around, 500mm x 500mm x 710mm high door in selected laminate surface
finish door complete with plywood backing with stainless steel hinges and
press & release magnetic lock set, 50mm x 0.8mm thick aluminium skirting
hairline gloss finish fixed on 50mm x 25mm hardwood base frame all as
Architect's drawings and manufacturer's detail [Ruang Terbitan Baru]
GLASS WRITTING BOARD [GW]
JAA / 2413 / KDN / IPSOM / D / P / 1.06
B 1 No
2400mm x 750mm x 10mm thick tempered glass white board to
manufacturer's detail complete with 6.5 inch (2m x 2m) manual wall projector
screen all as per architect's drawings and approval [Bilik Perbincangan]
8/6
JAA / 2413 / KDN / IPSOM / D / P / 1.10
A 1 No
1887mm x 1200mm x 10mm thick tempered glass white board complete
plywood backing complete with 300mm x 120mm x 4mm thick aluminium
duster plate to manufacturer's detail and architect's drawing. [Bilik Multimedia]
PONDOK BACAAN [PB]
JAA / 2413 / KDN / IPSOM / D / P / 1.11
B 3 No
4000mm x 2550mm x 3189mm high overall pondok bacaan pergola with pitch
frame comprising of 150mm x 50mm x 1.00mm thick rectangular hollow steel
frame infill with 150mm x 50mm x 1.00mm thick rectangular hollow steel at
188mm centres with woodgrain finish and 2800mm x 1800mm platform floor
with 4mm thick SPC finish on 12mm thick plywood all as per manufacturer's
details and architect's approval, [Ruang Koleksi/Ruang Bacaan]
8/7
KAUNTER LIBRARY [LC]

A 1 No
2511mm +2615mm x 630mm x 1100mm high overall size L- shape Kaunter
Penyambut Tetamu constructed of 700mm wide x 50mm thick quartz stone
surface top on 750mm high drawers and shelves, 450mm high backsplash
with 250mm wide top counter, front cover consisting of backpainted quality
mirror on ply backing and 25mm wide timber strip painted finish, 100mm x
0.8mm thick stainless steel kick plate in hairline finish complete with ply
backing and timber framing including 2 nos Netbox
- 2gang + wire tray + starter cable all accordance to Architect's drawings and
approval [Kaunter Library ]
8/8
COLLECTION
Page No. 8/1 -
Page No. 8/2 -
Page No. 8/3 -
Page No. 8/4 -
Page No. 8/5 -
Page No. 8/6 -
Page No. 8/7 -
Page No. 8/8 -
BUILT-IN FURNITURE
8/9
ELEMENT NO.9 - LOOSE FURNITURE (REMOVE FROM SUBCON SCOPE

OF WORK)
Notes:-

Schedule/BQ.
following items.
OFFICE CHAIR TYPE 2 [OC2]
A 8 No Err:509 Err:509
800mm x 475mm low back office chair in black comprising of cushion
backrest, fixed armrest made of black polypropylene as detail in Architect's
drawings [Ruang Pejabat, Bilik Perpustakawan, Kaunter]
OFFICE CHAIR LEATHER 2 [OCL2]
B 800mm x 475mm Synthetic leather office chair in cream/white comprising of 11 No Err:509 Err:509
unpholstered in leather as detail in Architect's drawings [Bilik Perbincangan &
Bilik Multimedia]
TRAINING STACKABLE CHAIR [TC]
C Stackable chair with main shell structure made of injection-moulded of 37 No Err:509 Err:509
polypropylene in black, backrest withstands more than 113kg force with seat
padding in black as detail in Architect's drawings [Bilik Multimedia, Ruang
Koleksi]
DOUBLE SEATER SOFA [2SS]

D 3 No Err:509 Err:509
840mm x 890mm x 1400mm (430mm seat height) sofa in black/brown/cream
made of PVC leather with metal chrome leg as detail in Architect's drawings.
[Ruang Koleksi bacaan, Ruang Masuk Utama]
BEAN BAG [BB]
E Approved bean bag in selected approved colour 4 No
Total carried to collection page Err:509
9/1
ELEMENT NO.9 - LOOSE FURNITURE (Cont'd)
COFFEE TABLE TYPE 1 [CT1]
A 1000mm x 450mm high round coffee table with solid rubber wood top 2 No Err:509 Err:509
complete with metal leg in dark wood as detail in Architect's drawings [Ruang
Koleksi/ Ruang Bacaan]
DISCUSSION TABLE [DST]
B 1 No
2400mm x 1887mm x 888mm high rectangular in selected oak wood coloured
solid surface laminates finish table top complete with plywood backing on
25mm x 50mm hardwood frame with 75mm diameter rectangular hollow steel
stainless steel table stand post in Architect's drawings [Bilik Perbincangan]
TRAINING TABLE [TT]
C 1800mm x 600mm x 750mm high foldable table laminate finish in white oak as 3 No
detail in Architect's drawings [Ruang Bacaan]
PC TABLE [PT]
D 5 No
Approved 4750mm x 675mm x 750mm high PC Table in selected oak wood
colour surface laminated finish table top complete with plywood backing on
25mm x 50mm hardwood frame with 75mm diameter RHS stainless steel
table stand post, 6 nos of 675mm x 750mm x 44mm diameter rectangular
hollow section stainless steel table stand post, 50mm x 75mm x 4mm thick
RHS stainless steel frame complete with 60mm hole size telephone/cable/wire
cap round all as detail in Architect's drawings [Bilik Multimedia]
RUG TYPE 2 [RG2]
2000mm x 2900mm x 6mm thick made of polyester fibre as detail in 1 No Err:509 Err:509
Architect's drawings [Ruang Masuk Utama]
9/2
ELEMENT NO.9 - LOOSE FURNITURE (Cont'd)
LED TRACK LIGHT
A 3 No
Approved 5 Nos 12 watts LED track light to manufacturer's detail complete
with wiring to architect's approval [Ruang Bacaan, Ruang Masuk]
B Approved 4 Nos 12 watts LED track light ditto [Ruang Bacaan] 6 No
HANGING LIGHT [HL]
Refer Drawings No:- JAA/2413/KDN/IPSOM/D/
C 630mm x 70mm x 50mm high hanging light in black with T8 LED tube 32W as 3 No
detail in Architect's drawings [Perpustakaan]
9/3
COLLECTION
Page No. 9/1 Err:509
Page No. 9/2 Err:509
Page No. 9/3 -
LOOSE FURNITURE
9/4
ELEMENT NO. 10 - SIGNAGES
Fabricate, supply, deliver, store, unwrap, assemble, install and place in

position the following items as per Architects' drawings and specifications
Lettering and numbering shall be Roboto CN and Roboto BK font as specified
Aluminium Plate Room Sign
400mm x 120mm x 5mm Thick aluminium plate signage with horizontal base
slot plate to manufacturer's detail comprising of Jata logo and numbering
using acid etching method and 'Kementerian Dalam Negeri (IPSOM)' lettering
and Officer/Room name with 80 micron thick 3M sticker grey matte colour
using solvent arcylic adhesive complete with base plate screw to door/wall
A To Officer room To Common room 1 No
B To Common room 5 No
Main Entrance Ipsom Lettering
C 30mm Thick stainless steel black matte powder coated 3D lettering 165mm 1 No
high for 'PERPUSTAKAAN'
D 20mm Thick stainless steel black matte powder coated 3D lettering 105mm 1 No
high for 'KEMENTERIAN DALAM NEGERI'
10/1
COLLECTION
Page No. 10/1 -
SIGNAGES
10/2
SUMMARY Page No
DEMOLITION WORKS 1/4 -
INTERNAL WALL AND INTERNAL WALL FINISHES 2/6 -
INTERNAL FLOOR FINISHES 3/2 -
INTERNAL CEILING FINISHES 4/3 -
INTERNAL DOORS 5/2 -
WINDOWS 6/3 -
OFFICE FURNITURE SYSTEM 7/2 -
BUILT-IN FURNITURE 8/9 -
LOOSE FURNITURE 9/4 Err:509
SIGNAGES 10/2 -
Total Amount to Form of Tender Err:509
B3/SUM

Bill No 2 & Bill No 3 - Reno Office & Library - Archi Items

Uploaded by

Copyright:

Available Formats

Bill No 2 & Bill No 3 - Reno Office & Library - Archi Items

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bill No 2 & Bill No 3 - Reno Office & Library - Archi Items

Uploaded by

Copyright:

Available Formats

Description Qty Unit Rate Amount

BILL NO. 2 - RENOVATION TO OFFICES

ELEMENT NO 2 - INTERNAL WALL AND INTERNAL WALL FINISHES

The Contractor to note all structural shalL be to soffit beam.

Description Qty Unit Rate Amount

ELEMENT NO 2 - INTERNAL WALL AND INTERNAL WALL FINISHES (Cont'd)

INTERNAL WALL (Cont'd)

PLASTER BOARD PARTITION

ELEMENT NO 2 - INTERNAL WALL AND INTERNAL WALL FINISHES (Cont'd)

INTERNAL WALL (Cont'd)

Description Qty Unit Rate Amount

ELEMENT NO 2 - INTERNAL WALL AND INTERNAL WALL FINISHES (Cont'd)

INTERNAL WALL (Cont'd)

INTERNAL WALL FINISHES

D 5mm Thick skim plastering to wall 240 M2

ELEMENT NO 2 - INTERNAL WALL AND INTERNAL WALL FINISHES (Cont'd)

INTERNAL WALL FINISHES (Cont'd)

ACOUSTIC WALL PANEL

B Wall, Overall size 1.75m x 2.30m high 8 No

C Wall, Overall size 1.20m x 2.30m high 3 No

LAMINATED TIMBER WALL FINISH

F 100mm Wide aluminium strip lining in brass colour 54 M

FLUTTED WALL PANEL

Description Qty Unit Rate Amount

ELEMENT NO 2 - INTERNAL WALL AND INTERNAL WALL FINISHES (Cont'd)

INTERNAL WALL FINISHES (Cont'd)

ALUMINIUM POWDER COATED VERTICAL FINS

ARTIFICIAL PLANT WALL PANEL [AW]

ELEMENT NO 2 - INTERNAL WALL AND INTERNAL WALL FINISHES (Cont'd)

INTERNAL WALL FINISHES (Cont'd)

RECEPTION BACKDROP WITH QUARTZ STONE FINISH

Refer Drawings No:-

C Wall [Pantri & Bilik Perbincangan Informal] 7 M2

Description Qty Unit Rate Amount

ELEMENT NO 2 - INTERNAL WALL AND INTERNAL WALL FINISHES (Cont'd)

INTERNAL WALL FINISHES (Cont'd)

A Wall [Tandas KE] 33 M2

B Surfaces of plastered and partition wall 1819 M2

MAKE GOOD EXISTING WORK

ELEMENT NO 2 - INTERNAL WALL AND INTERNAL WALL FINISHES (Cont'd)

INTERNAL WALL FINISHES (Cont'd)

PAINTING TO EXISTING WALL

All existing paint to be scrape off before applying new paint

B Surfaces of existing wall 525 M2

Description Qty Unit Rate Amount

Page No. 2/1 -

Page No. 2/2 -

Page No. 2/3 -

Page No. 2/4 -

Page No. 2/5 -

Page No. 2/6 -

Page No. 2/7 -

Page No. 2/8 -

Page No. 2/9 -

INTERNAL WALL AND INTERNAL WALL FINISHES

ELEMENT NO 3 - INTERNAL FLOOR FINISHES

CARPET TILE [CT]

C 3mm thick stainless steel divider 3 M

NON-SLIP HOMOGENOUS TILE [NHT-1]