Section 200

Product TSW Bridge Plug

P/N T727 / T730
Revision 4-Aug-2014

TSW Bridge Plug

The T727 TSW is a high pressure retrievable bridge plug suitable for use in selective
treating and testing of multiple zones. It is typically set mechanically on tubing or drillpipe
but can be supplied in an electric line set version for special applications. The design
includes a large internal by-pass area, to prevent swabbing while running or retrieving.
The by-pass closes off during the setting process and re-opens during the retrieving
process prior to the upper slips releasing so as to equalize pressure across the plug
before it unsets. It can be set in tension making it ideal for use in both shallow
applications, such as testing wellheads, and in deep set operations.

Features and Benefits

 Suitable for use at any depth.
 Standard tool is set and released by a ¼ turn to the right and pipe reciprocation.
Other J-slot configurations are available.
 Large by-pass area to prevent swabbing.
 The pressure across the tool is equalized before unsetting.
 Available in electric line set version.
 An emergency shear release mechanism is part of the
design.
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

SPECIFICATION GUIDE

ASSEMBLY NUMBER T727-55E-000.077

ENGLISH METRIC
CASING SIZE [IN./mm] 5.500 139,70
CASING WEIGHT RANGE [LB/FT - kg/m] 23.0 - 26.0 34,22 - 38,69
MAXIMUM O.D. [IN./mm] 4.406 111,91
LOWER THREAD CONNECTION 2.875" EU 8 RD PIN
TEMPERATURE RATING [°F / °C] 250 121,11
PACKING ELEMENTS 90-70-90 NITRILE
RUNNING / RETRIEVING TOOL T577-45A-000
WIRELINE ADAPTER KIT T719-45A-000

ASSEMBLY NUMBER T727-55B-000

ENGLISH METRIC
CASING SIZE [IN./mm] 5.500 139,70
CASING WEIGHT RANGE [LB/FT - kg/m] 20.0 - 23.0 29,76 - 34,22
MAXIMUM O.D. [IN./mm] 4.500 114,30
LOWER THREAD CONNECTION 2.375" EU 8 RD PIN
TEMPERATURE RATING [°F / °C] 250 121,11
PACKING ELEMENTS 90-70-90 NITRILE
RUNNING / RETRIEVING TOOL T577-55A-000
WIRELINE ADAPTER KIT T719-55A-000

ASSEMBLY NUMBER T727-55A-000

ENGLISH METRIC
CASING SIZE [IN./mm] 5.500 139,70
CASING WEIGHT RANGE [LB/FT - kg/m] 14.0 - 20.0 20,83 - 29,76
MAXIMUM O.D. [IN./mm] 4.625 117,48
LOWER THREAD CONNECTION 2.375" EU 8 RD PIN
TEMPERATURE RATING [°F / °C] 250 121,11
PACKING ELEMENTS 90-70-90 NITRILE
RUNNING / RETRIEVING TOOL T577-55A-000
WIRELINE ADAPTER KIT T719-55A-000

ASSEMBLY NUMBER T727-60A-000.001

ENGLISH METRIC
CASING SIZE [IN./mm] 6.000 152,40
CASING WEIGHT RANGE [LB/FT - kg/m] 12.0 - 20.0 17,86 - 29,76
MAXIMUM O.D. [IN./mm] 5.188 131,78
LOWER THREAD CONNECTION 2.375" EU 8 RD PIN
TEMPERATURE RATING [°F / °C] 250 121,11
PACKING ELEMENTS 90-70-90 NITRILE
RUNNING / RETRIEVING TOOL T577-55A-000
WIRELINE ADAPTER KIT T719-55A-000
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

PRE-RUN INSPECTION

1. Confirm J-pins on pulling head and lower thread connections are free of debris and damage.
2. Verify circulation ports are clean and free of debris.
3. Inspect element system and slips for cracks, cuts and shipping damage. Replace any damaged parts before
running the plug.
4. Confirm all set screws are installed and tight.
5. Confirm control body moves freely on J-slot mandrel.
6. Verify J-slot set / release configuration matches desired application.

PRECAUTIONS

1. Do not lift tool between upper and lower slip cage housings.
2. Place a back-up on lower end of J-slot mandrel when installing equipment below the plug.
3. Follow adapter kit installation instructions when installing the plug on wireline equipment.
4. Support the plug during pick-up to prevent damage to pulling head, upper and sealing mandrels.
5. When running the plug with a packer, ensure the J-slots in the plug, retrieving tool and the packer are compatible.

RUNNING PROCEDURE

Run in the wellbore to setting depth with retrieving tool attached. Pick-up and slack-off to determine tubing pick-up
and slack-off weights, repeat several times to verify true values. Record these weights for future reference. Pick up
on the tubing, rotate ¼ turn to the right at the tool, and lower the tubing to set lower slips and pack-off the elements.
Release torque after tubing has moved down approximately one foot. Pull tension on the tubing to continue pack-off
and set upper slips. See setting force chart for proper setting force. Set down and tension may be repeated to
ensure set and pack-off of plug. After setting is complete, set down weight {500 to 1,500 lb.} at tool, hold left-hand
torque on tubing and pick-up to release from plug. NOTE: This set and release procedure is for right-hand set, right-
hand release plug. Other J-slot options are available.

RELEASING PROCEDURE

Lower the tubing to a point approximately ten feet above the plug. Establish pick-up and slack-off weights as done in
setting procedure. If debris is expected above the plug, it may be necessary to reverse fluid to wash down to the plug.
Lower the tubing down until the retrieving tool automatically latches on the pulling head. Debris may be washed from
the upper slips by circulating through the upper portion of the plug. Set down weight on the plug {500 to 1,000 lb.},
hold right-hand torque and pick-up to open the bypass and allow differential pressure to equalize. Continue to pick-up
on the tubing to release the upper slips, relax the packing elements, release the lower slips and jay the plug in the
running position. If the plug will not release, set down weight on the plug to reset, then pick straight up to shear the J-
pins and release the plug. See parts list for J-pin shear value. After the J-pins are sheared, the plug cannot be
moved down hole.
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

SETTING FORCE GUIDE – MECHANICAL SET

SIZE MINIMUM FORCE REQUIRED AT SIZE MINIMUM FORCE REQUIRED AT

[IN./mm] TSW PLUG [LBF/kgf] [IN./mm] TSW PLUG [LBF/kgf]
4.500 10,000 6.625 14,000
114,30 4536 168,28 6350
5.000 10,000 7.000 15,000
127,00 4536 177,80 6804
5.500 12,000 7.625 20,000
139,70 5443 193,68 9072
6.000 12,000 9.625 25,000
152,40 5443 244,48 11339,81

AVAILABLE J-PINS

SIZE ASSEMBLY J-PIN SHEAR PRODUCT

[IN./mm] NUMBER PER PIN [LBF/kgf] NUMBER
20,000 T724-45B-871
22,000 T724-45B-873
4.500 T727-45B 25,000 T724-45B-872
114,30
33,000 T724-45B-870
NON-SHEAR T724-45B-874
20,000 T724-45A-871
22,000 T724-45A-873
4.500 T727-45A 25,000 T724-45A-872
114,30
33,000 T724-45A-870
NON-SHEAR T724-45A-874
5.500 25,000 T724-55A-872
T727-55A, B & E
139,70 NON-SHEAR T724-55A-874
6.000 25,000 T724-55A-872
T727-60
152,40 NON-SHEAR T724-55A-874
6.625 T730-65A 48,000 T724-70A-870
168,28 T730-65B NON-SHEAR T724-70A-875
7.000 48,000 T724-70A-870
T730-70A, B & C
177,80 NON-SHEAR T724-70A-875
7.625 T730-75A
NON-SHEAR T730-75A-874
193,68 T730-75C
9.625
244,48
T730-95A NON-SHEAR T730-95A-870
NOTE: Other shear values available on request.
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

MECHANICAL WIRELINE
SET SET
4.500” – 6.000”
1 1

2 2
3 3
4
5
6
4

5
10
12
13

6 14

8 8
9
9 16
10 11
11 17
12 18
19
13 20
19
18
14 21
22
15 23

24

16 25
17
18 26
19
20
19 25
18
21 24
22
23 27
28
24 15
30
25 29
31
26
33
25

24

27 36
28
37
29
38
LEFT HAND
30 THREAD

31 7
32 32
33
39
34
LEFT HAND
35 THREAD 40
36
37 41
38 42
LEFT HAND
THREAD
39 43

44
FOR REFERENCE
RH-RH J-SLOT FOR REFERENCE
RH-RH J-SLOT
PATTERN SHOWN.
40 PATTERN SHOWN.

LEFT HAND
THREAD

41
42

43

44

45 45
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

ASSEMBLY

1. Apply a thin coat of lubricant to all threads, o-rings and o-ring grooves during assembly.
2. Place center coupling [22] in vise. Install o-ring [21] in center coupling [22].
3. Install gage ring [23] on center coupling [22].
4. Install rubber mandrel [28] in center coupling [22]. {NOTE: On assembly T727-45B-000, packing elements, rubber
spacers and lower cone are installed on rubber mandrel before installing rubber mandrel in center coupling.}
5. Slide packing elements [24 & 26], rubber spacers [25] and lower cone [27] on rubber mandrel [28] as shown.
6. Install o-rings [18] in seals [19]. Slide one seal [19] in center coupling [22] as shown.
7. Install o-ring [17] in upper cone [14].
8. Slide seal [19] and seal retaining ring [20] in upper cone [14] as shown.
9. Install upper cone [14] in center coupling [22]. Install set screws [16] in center coupling [22].
10. Slide sealing mandrel [15] through upper cone [14] and rubber mandrel [28] from upper end.
11. Install J-slot mandrel [44] onto seal mandrel [28]. Place a back-up on lower end of seal mandrel [15] in recess
above lower threads and tighten J-slot mandrel. Remove any wrench marks.
12. Install set screws [32] in J-slot mandrel [44].
13. Install lower slip sleeve [36] on rubber mandrel [28]. Install set screws [29] in lower slip sleeve [36].
14. Place a bar through slots in upper cone [14] and slots in sealing mandrel [15].
15. Install o-ring [9] in plug [8]. Place plug [8] in top of sealing mandrel [15].
16. Install upper mandrel [5] on sealing mandrel [15].
17. Install set screws [11] in upper mandrel [5].
18. Place upper slip springs [10], upper slips [12] and releasing slip [13] in upper slip body [6]. Hold slips in place with
plastic ties or locking pliers.
19. Slide upper slip body [6] on upper mandrel [5]. Remove plastic ties / locking pliers from upper slips [12] and
releasing slip [13].
20. Slide follower spring [4] on upper mandrel [5] as shown.
21. Install spring retaining ring [3] on pulling head [1]. Install pulling head [1] on upper mandrel [5].
22. Install set screws [2] in pulling head [1].
23. Place lower slips [30] and lower slip springs [31] in control body [33]. Hold slips in place with plastic ties or
locking pliers. NOTE: If plug is to be run on wireline, drag blocks and drag block springs are not installed.
24. Slide control body [33] on lower slip sleeve [36]. Remove plastic ties / locking pliers from lower slips.
25. Install rubber mandrel cap [39] on lower slip sleeve [36].
26. Place drag block springs [34] and drag blocks [35] in control body [33]. Use a clamp to compress drag blocks [35]
in slots in control body [33].
27. Slide drag block retainer [37] onto control body [33] with lip covering end of drag blocks [35].
28. Install extension body [40] on control body [33]. LEFT-HAND THREAD.
29. Install set screws [38] in extension body [40].
30. Place J-pin sub [43] on J-slot mandrel [44]. On T727-45B-000, place J-pin retainer [46] on J-slot mandrel, then
place J-pin sub on J-slot mandrel, install J-pins and cover with J-pin retainer. Align J-pin holes in J-pin sub with J-
slot in J-slot mandrel. Insert J-pins [42] in J-pin sub [43] and install extension body [40] on J-pin sub [43]. LEFT-
HAND THREAD. Install set screws [41] in extension body [40].
31. Install bottom sub [45] on J-slot mandrel [44].
32. Remove bar from upper cone [14].
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

DISASSEMBLY

1. Place center coupling [22] in vise.

2. Remove bottom sub [45] from J-slot mandrel [44].
3. Remove set screws [38 & 41] from extension body [40].
4. Remove extension body [40] from J-pin sub [43]. LEFT-HAND THREAD.
5. Remove J-pins [42] from J-pin sub [43] and remove J-pin sub from J-slot mandrel [44].
6. Remove extension body [40] from control body [33]. LEFT-HAND THREAD.
7. Use a clamp to compress and hold drag blocks [35].
8. Remove drag block retainer [37] from control body [33].
9. Slowly release clamp from drag blocks [35]. Remove drag blocks [35] and drag block springs [34] from control
body [33].
10. Remove rubber mandrel cap [39] from lower slip sleeve [36].
11. Remove control body [33] from lower slip sleeve [36].
12. Remove lower slips [30] and lower slip springs [31] from control body [33].
13. Place a bar through slots in upper cone [14] and sealing mandrel [15].
14. Remove set screws [2] from pulling head [1].
15. Remove pulling head [1] from upper mandrel [5].
16. Remove spring retaining ring [3] from pulling head [1].
17. Remove follower spring [4] from upper mandrel [5].
18. Remove upper slip body [6] from upper mandrel [5].
19. Remove upper slips [12], releasing slip [13] and upper slip springs [10] from upper slip body [6].
20. Remove set screws [11] from upper mandrel [5].
21. Remove upper mandrel [5] from sealing mandrel [15].
22. Remove plug [8] from sealing mandrel [15].
23. Remove o-ring [9] from plug [8].
24. Remove set screws [29] from lower slip sleeve [36].
25. Remove lower slip sleeve [36] from rubber mandrel [28].
26. Remove set screws [32] from J-slot mandrel [44].
27. Remove J-slot mandrel [44] from sealing mandrel [15].
28. Remove lower cone [27], packing elements [24 & 26] and rubber spacers [25] from rubber mandrel [28].
29. Remove gage ring [23] from center coupling [22].
30. Remove bar from upper cone [14] and remove sealing mandrel [15] from upper cone.
31. Remove set screws [16] from center coupling [22].
32. Remove upper cone [14] from center coupling [22]. Remove o-ring [17] from upper cone [14].
33. Remove seal retaining ring [20] and seal [19] from upper cone [14].
34. Remove seal [19] from center coupling [22]. Remove o-rings [18] from seals [19].
35. Remove rubber mandrel [28] from center coupling [22].
36. Remove o-ring [21] from center coupling [22].
37. Clean and inspect all parts.
38. Replace any damaged or worn parts. It is recommended to replace all o-rings, seals, set screws, springs and
packing elements after each use.
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

PARTS LIST

5.500" 5.500"
ITEM
DESCRIPTION 23.0 - 26.0 20.0 - 23.0
NO.
T727-55E-000.077 T727-55B-000
1 PULLING HEAD T727-55A-715 T727-55A-715
HT03-C6-08 (3) HT03-C6-08 (3)
2 SET SCREW* 3/8-16 X 3/8" 3/8-16 X 3/8"
3 SPRING RETAINING RING T720-55A-820 T720-55A-820
4 FOLLOWER SPRING* T727-55A-925 T727-55A-925
5 UPPER MANDREL T727-55B-215 T727-55B-215
6 UPPER SLIP BODY T727-55E-325 T727-55A-325
7 SHEAR SCREW* T601-45A-990 (16) T601-45A-990 (16)
BRASS 1,760-LB/EA. SOLD SEPARATELY SOLD SEPARATELY
8 PLUG T724-55A-216 T724-55A-216
9 O-RING* #211 90D NITRILE HO211-90N HO211-90N
10 UPPER SLIP SPRING* T071-55A-902 (6) T071-55A-902 (6)
HT03-C6-08 (3) HT03-C6-08 (3)
11 SET SCREW* 3/8-16 X 3/8" 3/8-16 X 3/8"
12 UPPER SLIP CARBIDE T727-55E-116 (2) T600-55A-116C (2)
13 RELEASING SLIP T727-55E-125 T650-55A-126
14 UPPER CONE T727-55E-410 T725-55A-410
15 SEALING MANDREL T724-55A-215 T724-55A-215
HT03-C6-08 (3) HT03-C6-06 (3)
16 SET SCREW* 3/8-16 X 3/8" 3/8-16 X 3/8"
17 O-RING* #239 90D NITRILE HO239-90N HO239-90N
18 O-RING* #140 90D NITRILE HO140-90N (2) HO140-90N (2)
19 SEAL* MOLDED NITRILE T600-40A-520 (2) T600-40A-520 (2)
20 SEAL RETAINING RING T720-55A-831 T720-55A-831
21 O-RING* #229 90D NITRILE HO229-90N HO229-90N
22 CENTER COUPLING T727-55E-620 T724-55A-620
23 GAGE RING T727-55E-830 T724-55B-830
24 PACKING ELEMENT* 90D NITRILE T727-55E-513 (2) T720-55B-513 (2)
25 RUBBER SPACER T727-55E-840 (2) T720-55B-851 (2)
26 PACKING ELEMENT* 70D NITRILE T727-55E-511 T720-55B-511
27 LOWER CONE T727-55E-420 T720-55B-420
28 RUBBER MANDREL T724-55A-220 T724-55A-220
HT03-C4-04 (3) HT03-C4-04 (3)
29 SET SCREW* 1/4-20 X 1/4" 1/4-20 X 1/4"
30 LOWER SLIP CARBIDE T727-55E-136 (4) T710-55A-120C (4)
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

PARTS LIST

5.500" 5.500"
ITEM
DESCRIPTION 23.0 - 26.0 20.0 - 23.0
NO.
T727-55E-000.077 T727-55B-000
31 LOWER SLIP SPRING* T071-55A-900 (8) T071-55A-900 (8)
HT03-C6-06 (3) HT03-C6-06 (3)
32 SET SCREW* 3/8-16 X 3/8" 3/8-16 X 3/8"
33 CONTROL BODY T727-55E-335 T613-55B-335
34 DRAG BLOCK SPRING* T091-00A-900 (24) T091-00A-900 (24)
35 DRAG BLOCK TDB560C (6) TDB450C (6)
36 LOWER SLIP SLEEVE T724-55B-912 T724-55B-912
37 DRAG BLOCK RETAINER T727-55E-910 T600-55B-910
HT03-C5-08 (3) HT03-C5-08 (3)
38 SET SCREW* 5/16-18 X 1/2" 5/16-18 X 1/2"
39 RUBBER MANDREL CAP T601-55A-230 T601-55A-230
40 EXTENSION BODY T727-55E-370 T727-55A-370
HT03-C6-06 (3) HT03-C6-08 (3)
41 SET SCREW* 3/8-16 X 3/8" 3/8-16 X 1/2"
42 J-PIN* SOLID NON-SHEAR T724-55A-874 (2) T724-55A-874 (2)
43 J-PIN SUB T727-55E-875 T724-55A-875
44 J-SLOT MANDREL RH-RH T724-55A-230 T724-55A-230
45 BOTTOM SUB T101-23NB-27EP-5 T650-50A-670-5
*Common replacement parts.
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

PARTS LIST

5.500" 6.000"
ITEM
DESCRIPTION 14.0 - 20.0 12.0 - 20.0
NO.
T727-55A-000 T727-60A-000.001
1 PULLING HEAD T727-55A-715 T727-55A-715
HT03-C6-08 (3) HT03-C6-08 (3)
2 SET SCREW* 3/8-16 X 1/2"
3/8-16 X 3/8" 3/8-16 X 3/8"
3 SPRING RETAINING RING T720-55A-820 T720-55A-820
4 FOLLOWER SPRING* T727-55A-925 T727-55A-925
5 UPPER MANDREL T727-55A-212 T727-55A-212
6 UPPER SLIP BODY T727-55A-325 T727-60A-325
7 SHEAR SCREW* T601-45A-990 (16) T601-45A-990 (16)
BRASS 1,760-LB/EA. SOLD SEPARATELY SOLD SEPARATELY
8 PLUG T724-55A-216 T724-55A-216
9 O-RING* #211 90D NITRILE HO211-90N HO211-90N
10 UPPER SLIP SPRING* T071-55A-902 (6) T071-55A-902 (6)
HT03-C6-06 (3) HT03-C6-06 (3)
11 SET SCREW* 3/8-16 X 3/8" 3/8-16 X 3/8"
12 UPPER SLIP CARBIDE T600-55A-116C (2) T725-60A-116 (2)
13 RELEASING SLIP T650-55A-126 T725-60A-125
14 UPPER CONE T725-55A-410 T725-60A-410
15 SEALING MANDREL T724-55A-215 T724-55A-215
HT03-C6-06 (3) HT03-C6-06 (3)
16 SET SCREW* 3/8-16 X 3/8" 3/8-16 X 3/8"
17 O-RING* #239 90D NITRILE HO239-90N HO239-90N
18 O-RING* #140 90D NITRILE HO140-90N (2) HO140-90N (2)
19 SEAL* MOLDED NITRILE T600-40A-520 (2) T600-40A-520 (2)
20 SEAL RETAINING RING T720-55A-831 T720-55A-831
21 O-RING* #229 90D NITRILE HO229-90N HO229-90N
22 CENTER COUPLING T724-55A-620 T724-55A-620
23 GAGE RING T724-55A-830 T725-60A-830
24 PACKING ELEMENT* 90D NITRILE T720-55A-513 (2) T725-60A-513 (2)
25 RUBBER SPACER T720-55A-851 (2) T725-60A-840 (2)
26 PACKING ELEMENT* 70D NITRILE T720-55A-511 T725-60A-511
27 LOWER CONE T720-55A-420 T725-60A-420
28 RUBBER MANDREL T724-55A-220 T724-55A-220
HT03-C4-04 (3) HT03-C4-04 (3)
29 SET SCREW* 1/4-20 X 1/4" 1/4-20 X 1/4"
30 LOWER SLIP CARBIDE T710-55A-120C (4) T720-60A-120 (4)
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

PARTS LIST

5.500" 6.000"
ITEM
DESCRIPTION 14.0 - 20.0 12.0 - 20.0
NO.
T727-55A-000 T727-60A-000.001
31 LOWER SLIP SPRING* T071-55A-900 (8) T071-55A-900 (8)
HT03-C6-06 (3) HT03-C6-06 (3)
32 SET SCREW* 3/8-16 X 3/8" 3/8-16 X 3/8"
33 CONTROL BODY T613-55A-335 T725-60A-335
34 DRAG BLOCK SPRING* T091-00A-900 (24) T091-00A-900 (30)
35 DRAG BLOCK TDB550C (6) TDB560C (6)
36 LOWER SLIP SLEEVE T724-55A-912 T724-55A-912
37 DRAG BLOCK RETAINER T600-55A-911 T725-60A-910
HT03-C5-08 (3) HT03-C5-08 (3)
38 SET SCREW* 5/16-18 X 1/2" 5/16-18 X 1/2"
39 RUBBER MANDREL CAP T601-55A-230 T601-55A-230
40 EXTENSION BODY T727-55A-370 T727-55A-370
HT03-C6-08 (3) HT03-C6-08 (3)
41 SET SCREW* 3/8-16 X 1/2" 3/8-16 X 1/2"
42 J-PIN* SOLID NON-SHEAR T724-55A-874 (2) T724-55A-874 (2)
43 J-PIN SUB T724-55A-875 T724-55A-875
44 J-SLOT MANDREL T724-55A-230 T724-55A-231
RH-RH LH-RH
45 BOTTOM SUB T650-50A-670-5 T650-50A-670-5
*Common replacement parts.
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

DIMENSIONAL DATA B
F

DIMENSIONS [IN./mm] G
ASSEMBLY
C
NUMBER A B C D E F
H
76.500 2.875 9.375 9.843 4.750 2.625
T727-45B-000
1943,10 73,03 238,13 250,01 120,65 66,68
76.500 2.875 9.375 9.843 4.750 2.625
T727-45A-000
1943,10 73,03 238,13 250,01 120,65 66,68
76.500 2.875 9.375 9.843 4.750 2.625 D
T727-50B-000
1943,10 73,03 238,13 250,01 120,65 66,68
76.500 2.875 9.375 9.843 4.750 2.625
T727-50A-000
1943,10 73,03 238,13 250,01 120,65 66,68
87.750 2.875 8.875 12.094 5.562 2.625
T727-55E-000.077 J
2228,85 73,03 225,43 307,19 141,27 66,68 E
87.750 2.875 8.875 12.094 5.562 2.625
T727-55B-000
2228,85 73,03 225,43 307,19 141,27 66,68
87.750 2.875 8.875 12.094 5.562 2.625
T727-55A-000
2228,85 73,03 225,43 307,19 141,27 66,68
87.750 2.875 8.875 12.094 5.562 2.625
T727-60A-000.001
2228,85 73,03 225,43 307,19 141,27 66,68

DIMENSIONS [IN./mm]
ASSEMBLY
K
NUMBER G H J K M N A

3.250 3.250 3.625 3.625 3.625 3.625

T727-45B-000
82,55 82,55 92,08 92,08 92,08 92,08
3.250 3.250 3.750 3.750 3.750 3.750
T727-45A-000
82,55 82,55 95,25 95,25 95,25 95,25 K
3.250 3.250 4.000 4.000 4.000 3.750
T727-50B-000
82,55 82,55 101,60 101,60 101,60 95,25
3.250 3.250 4.000 4.125 4.000 3.750
T727-50A-000
82,55 82,55 101,60 104,78 101,60 95,25 M
3.250 3.250 4.406 4.406 4.406 4.406
T727-55E-000.077
82,55 82,55 111,91 111,91 111,91 111,91
3.250 3.250 4.500 4.500 4.500 4.500 N
T727-55B-000
82,55 82,55 114,30 114,30 114,30 114,30
3.250 3.250 4.500 4.625 4.500 4.625
T727-55A-000
82,55 82,55 114,30 117,48 114,30 117,48
3.250 3.250 5.188 5.188 5.130 5.188
T727-60A-000.001
82,55 82,55 131,78 131,78 130,30 131,78
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

4.500” – 6.000” TSW Bridge Plug Wireline Setup

1. Place pulling head [1] in vise.
2. Lubricate seal surface of sealing mandrel [15].
3. Rotate extension body [40] on J-slot mandrel [44] and move extension body up J-slot mandrel to place J-pins [42]
in set position, upper end of J-slot as shown in drawing, page 8. This will require moving rubber mandrel
subassembly [14 through 43] up the sealing mandrel [15] placing the seals [19] on the seal surface of sealing
mandrel [15]. See pin location in J-slot drawing next to WIRELINE SET drawing, page 8.
4. Align shear screw holes in extension body [40] with counter-bore holes in rubber mandrel cap [39]. Install shear
screws [7] in extension body [40]. Bottom out shear screws in counter-bore holes in rubber mandrel cap [39],
then back out 1/8 turn.
5. Place upper end of upper slip body [6] in vise.
6. Push on pulling head [1] to move pulling head, upper mandrel [5], sealing mandrel [15] and J-slot mandrel [44]
down, compressing follower spring [4]. Move mandrel assembly down until shear screw holes in upper slip body
[6] align with counter-bore holes in upper mandrel [5].
7. Install shear screws [7] in upper slip body [6] and counter-bore holes in upper mandrel [5]. Bottom out shear
screws in counter-bores in upper mandrel, then back out 1/8 turn. Slowly release force pushing down on pulling
head.

6.625” - 7.625” TSW Bridge Plug Wireline Setup

1. Place pulling head [1] in vise.

2. Lubricate seal surface of sealing mandrel [26].
3. Rotate drag block body [53] on J-slot mandrel [52] and move drag body up J-slot mandrel to place J-pins [47] in
set position, upper end of J-slot as shown in drawing, page 20. This will require moving rubber mandrel
subassembly [25 through 53] up the sealing mandrel [26] placing the seals [29] on seal surface of sealing mandrel
[26]. See pin location in J-slot drawing next to WIRELINE SET drawing.
4. Align shear screw holes in lower cone [41] with counter-bore holes in tie sleeve [42]. Install shear screws [10] in
lower cone. Bottom out shear screws in counter-bore holes in tie sleeve, then back out 1/8 turn.
5. Place upper end of upper slip body [19] in vise.
6. Push on pulling head [1] to move pulling head, upper mandrel [6], sealing mandrel [26] and J-slot mandrel [52]
down, compressing follower spring [5]. Move mandrel assembly down until shear screw holes in upper slip
support [7] align with counter-bore holes in upper mandrel [6].
7. Install shear screws [10] in upper slip support [7] and counter-bore holes in upper mandrel [6]. Bottom out shear
screws in counter-bores in upper mandrel, then back out 1/8 turn. Slowly release force pushing down on pulling
head.
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

5.500” & 7.000” WAK

1. Slide setting sleeve [5] on setting tool, move up above lower threads. 1
2. Install outer adapter [2] on setting tool and install set screws [1].
D
3. Align holes in inner adapter [6] with groove in pulling head of TSW plug. B 2
4. Install shear screws [7] in inner adapter [6] and in groove in pulling head. 3
5. Install inner adapter [6] on setting tool. Install set screws [4].
6. Thread setting sleeve [5] over outer adapter [2]. Rotate setting sleeve
down to upper slip body of TSW plug. Bottom out sleeve, then back off
1/8” to ¼”. 4
7. Install set screws [3] in setting sleeve [5].
E
PARTS LIST

ITEM 5.500" 5
DESCRIPTION
NO. T719-55A-000
1 SET SCREW* 1/4-20 X 1/4" HT03-C4-04 (2)
C
2 OUTER ADAPTER T598-55A-120
3 SET SCREW* 5/16-18 X 3/8" HT03-C5-06 (2)
6
4 SET SCREW* 5/16-18 X 3/8" HT03-C5-06 (2) A
5 SETTING SLEEVE T719-55A-475
6 INNER ADAPTER T719-55A-465
SHEAR SCREW* 1/2-13 x 7/16" HT07-C8-07B (8)
7 5,000-LB/EA. F
ORDERED SEPARATELY

7
ITEM 7.000"
DESCRIPTION
NO. T719-70A-000
1 SET SCREW* 1/4-20 X 1/4" HT03-C4-04 (2)
2 OUTER ADAPTER T598-55A-120 G
3 SET SCREW* 5/16-18 X 1/2" HT03-C5-08 (2)
4 SET SCREW* 5/16-18 X 3/8" HT03-C5-06 (2)
5 SETTING SLEEVE T719-70A-475
6 INNER ADAPTER T719-70A-465
SHEAR SCREWS* 1/2-13 X 1/2" HT07-C8-08B (8)
7
Ordered Separately 5,000-LB/EA. H
*Common repair parts.

DIMENSIONAL DATA

DIMENSIONS [IN./mm]
ASSEMBLY
NUMBER A B C D E F G H

29.500 4.000 13.688 3.307 2.765 3.265 4.500 3.985

T719-55A-000
749,30 101,60 347,68 84,00 70,23 82,93 114,30 101,22
38.625 4.000 16.750 3.307 2.765 3.765 5.641 4.734
T719-70A-000
981,08 101,60 425,45 84,00 70,23 95,61 143,28 120,24
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

RUNNING / RETRIEVING TOOL

1. Slide plunger [5] in body [3] as shown. 1

2. Slide follower spring [4] into body [3].
3. Install top sub [1] in body [3] and install set screws [2].
4. On 6.625” and larger, install shoe [6] on J-body [3]. 2

PARTS LIST

4.500" X 2.375"
ITEM 3
DESCRIPTION 13.5 - 15.1
NO.
T577-45B-000
1 TOP SUB T577-45B-610
2 SET SCREW* 3/8-16 X 5/16" HT03-C6-05 (3)
3 J-BODY T577-45B-315 4
4 FOLLOWER SPRING* T600-45A-920
5 PLUNGER T577-45A-911

4.500" X 2.375"
ITEM
DESCRIPTION 9.5 - 13.5
NO. 5
T577-45A-000
1 TOP SUB T577-45A-610
2 SET SCREW* 3/8-16 X 3/8" HT03-C6-06 (3)
3 J-BODY T577-45A-316
4 FOLLOWER SPRING* T600-45A-920
5 PLUNGER T577-45A-911

5.500" X 2.375"
ITEM
DESCRIPTION 14.0 - 23.0
NO.
T577-55A-000
1 TOP SUB T577-45A-610
2 SET SCREW* 3/8-16 X 3/8" HT03-C6-06 (3)
3 J-BODY T577-55A-315
4 FOLLOWER SPRING* T600-45A-920
5 PLUNGER T577-45A-911
*Common replacement parts.
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

DIMENSIONAL DATA

DIMENSIONS [IN/mm] B
ASSEMBLY
NUMBER A B C

T577-45B-000 28.500 3.145 3.656

723,90 79,88 92,86

T577-45A-000 28.500 3.145 3.766

723,90 79,88 95,66

T577-55A-000 28.628 3.145 3.766

727,15 79,88 95,66

T577-65A-000 34.750 3.688 4.265

882,65 93,68 108,33 C
T577-65B-000 34.750 3.688 4.265
882,65 93,68 108,33

T577-70A-000 34.750 3.688 4.265

882,65 93,68 108,33
34.750 3.688 4.265
T577-75A-000 882,65 93,68 108,33
34.870 4.505 6.390
T577-95-000 885,70 114,43 162,31

DIMENSIONS [IN/mm] A
ASSEMBLY
NUMBER D E F

T577-45B-000 2.735 3.360 3.656

69,47 85,34 92,86

T577-45A-000 2.735 3.360 3.766 D

69,47 85,34 95,66

T577-55A-000 2.735 3.760 4.500

69,47 95,50 114,30

T577-65A-000 2.985 4.375 5.500

75,82 111,13 139,70

T577-65B-000 2.985 4.375 5.750

75,82 111,13 146,05

T577-70A-000 2.985 4.375 5.875

75,82 111,13 149,23
2.985 4.375 6.375
T577-75A-000 75,82 111,13 161,93 E
4.825 6.245 8.000
T577-95-000 122,56 158,62 203,20

F
 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

BALL CATCHER 1

ASSEMBLY

1. Remove set screws from pulling head on plug and remove pulling head.
2. Install coupling [7] on mandrel of plug.
2
3. Install set screws [6] in coupling [7].
4. Install ball catcher mandrel [3] in coupling [7] and install set screws [5].
5. Install sleeve [4] on coupling [7].
6. Install ball catcher pulling head [1] on mandrel [3] and install set screws [2].

PARTS LIST
3
ITEM T721-45A-000 T721-45A-006
DESCRIPTION
NO. 9.5 - 13.5 9.5 - 13.5
1 PULLING HEAD T727-45A-745 T727-45A-745
2 SET SCREW* HT03-C6-06 (3) HT03-C6-06 (3)
3 MANDREL T727-45A-609 T727-45A-626
4 SLEEVE T724-45A-310 T724-45A-326
5 SET SCREW* HT03-C6-06 (3) HT03-C6-06 (3)
6 SET SCREW* HT03-C6-06 (3) HT03-C6-06 (3)
7 COUPLING T727-45A-600 T727-45A-600
NOTE SLEEVE CAPACITY** 300 BALL** 600 BALL**

ITEM T721-55A-000 T721-55A-006

DESCRIPTION
NO. 13.0 - 23.0 13.0 - 23.0
1 PULLING HEAD T721-55A-715 T721-55A-715
2 SET SCREW* HT03-C6-08 (3) HT03-C6-08 (3)
3 MANDREL T721-55A-609 T721-55A-626
4 SLEEVE T721-55A-311 T721-55A-326
5 SET SCREW* HT03-C6-08 (3) HT03-C6-08 (3) 4
6 SET SCREW* HT03-C6-08 (3) HT03-C6-08 (3)
7 COUPLING T721-55A-600 T721-55A-600
NOTE SLEEVE CAPACITY** 300 BALL** 600 BALL**

ITEM T721-70A-000 T721-70A-006

DESCRIPTION
NO. 17.0 - 35.0 17.0 - 35.0
1 PULLING HEAD T721-70A-715 T721-70A-715
2 SET SCREW* HT03-C6-06 (3) HT03-C6-06 (3)
3 MANDREL T721-70A-210 T721-70A-213
4 SLEEVE T721-70A-310 T721-70A-313
5 SET SCREW* NOT REQ'D NOT REQ'D
6 SET SCREW* HT03-C6-08 (3) HT03-C6-08 (3)
7 COUPLING T721-70A-620 T721-70A-620
NOTE SLEEVE CAPACITY** 300 BALL** 600 BALL** 5
*Common replacement parts.
6

NOTE: T721-45A-000 & T721-45A-006 requires T577-45A-020 Retrieving Tool. 7

 Section 200
Product TSW Bridge Plug
P/N T727 / T730
Revision 4-Aug-2014

DIMENSIONAL DATA D

DIMENSIONS [IN./mm] E
ASSEMBLY
NUMBER A B C D E B

48.813 9.313 36.625 1.875 2.500

T721-45A-000 1239,85 236,55 930,28 47,63 63,50
80.313 9.313 67.625 1.875 2.500 F
T721-45A-006 2039,95 236,55 1717,68 47,63 63,50
38.063 9.250 25.375 2.625 3.250
T721-55A-000 966,80 234,95 644,53 66,68 82,55
62.313 9.250 49.620 2.625 3.250
T721-55A-006 1582,75 234,95 1260,35 66,68 82,55
G
35.688 15.500 24.375 2.880 3.755
T721-70A-000 906,48 393,70 619,13 73,15 95,38
60.063 15.500 49.375 2.880 3.755
T721-70A-006 1525,60 393,70 1254,13 73,15 95,38

DIMENSIONS [IN./mm]
ASSEMBLY
NUMBER F G H J K
1.875 1.500 3.750 3.375 3.015
T721-45A-000 47,63 38,10 95,25 85,73 76,58
1.875 1.500 3.750 3.375 3.015 H
T721-45A-006 47,63 38,10 95,25 85,73 76,58
A
2.640 2.000 4.500 4.110 3.438
T721-55A-000 67,06 50,80 114,30 104,39 87,33
2.640 2.000 4.500 4.110 3.438
T721-55A-006 67,06 50,80 114,30 104,39 87,33
3.755 3.094 5.875 5.250 4.250
T721-70A-000 95,38 78,59 149,23 133,35 107,95
C

3.755 3.094 5.875 5.250 4.250

T721-70A-006 95,38 78,59 149,23 133,35 107,95