0% found this document useful (0 votes)
53 views33 pages

Structural Damages On VT-MXD: DNDW 08:09 08.aug.2022 Page 1/23

Uploaded by

devansh dewan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
53 views33 pages

Structural Damages On VT-MXD: DNDW 08:09 08.aug.2022 Page 1/23

Uploaded by

devansh dewan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 33

DNDW 08.Aug.

2022
Structural Damages on VT-MXD 08:09 Page 1/23
DENT & BUCKLE CHART: AIRCRAFT BOTTOM VIEW (SECTION 46)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 2/23
DENT & BUCKLE CHART: INLET COWL (LH ENG)
Item 20-R
CORROSION
10.Oct.2021

Item 1-H
W/O 5187211
CORROSION
08.Oct.2021

Item 8-H
W/O 4300631
CORROSION
13.Oct.2021

Item 7-H
Item 15-H W/O 4300631
CORROSION
W/O 5187211
13.Oct.2021
CORROSION
08.Oct.2021 Item 14-H
W/O 5187211
CORROSION Item 6-H
Item 3-H 08.Oct.2021 W/O 4300631
W/O 4300631 CORROSION
CORROSION 13.Oct.2021
13.Oct.2021

Item 2-H
W/O 4300631
CORROSION
13.Oct.2021 Item 5-H
W/O 4300631
CORROSION
13.Oct.2021

Item 4-H
W/O 4300631
CORROSION
13.Oct.2021

Item 19-R
CORROSION
10.Oct.2021

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 3/23
DENT & BUCKLE CHART: INLET COWL (RH ENG)

Item 9-I
W/O 4300642
CORROSION Item 16-I
13.Oct.2021
W/O 5187212
CORROSION
08.Oct.2021
Item 18-I
Item 10-I W/O 5187212
W/O 4300642 CORROSION
CORROSION 08.Oct.2021
13.Oct.2021 Item 13-I
W/O 4300642
CORROSION
13.Oct.2021

Item 17-I
W/O 5187212
CORROSION
08.Oct.2021

Item 11-I
W/O 4300642
Item 12-I
CORROSION W/O 4300642
13.Oct.2021 CORROSION
13.Oct.2021

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 4/23
DENT & BUCKLE CHART: FUSELAGE BODY CROSS SECTION VIEW

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 5/23
DENT & BUCKLE CHART: HORIZONTAL STABILIZER

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 6/23
DENT & BUCKLE CHART: LEFT WING VIEW

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 7/23
DENT & BUCKLE CHART: RIGHT WING VIEW

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 8/23
DENT & BUCKLE CHART: SECTION 41 (RH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 9/23
DENT & BUCKLE CHART: SECTION 43 (LH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 10/23
DENT & BUCKLE CHART: SECTION 43 (RH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 11/23
DENT & BUCKLE CHART: SECTION 44 (LH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 12/23
DENT & BUCKLE CHART: SECTION 44 (RH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 13/23
DENT & BUCKLE CHART: SECTION 46 (LH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 14/23
DENT & BUCKLE CHART: SECTION 46 (RH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 15/23
DENT & BUCKLE CHART: SECTION 47 (LH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 16/23
DENT & BUCKLE CHART: SECTION 47 (RH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 17/23
DENT & BUCKLE CHART: SECTION 48 (LH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 18/23
DENT & BUCKLE CHART: SECTION 48 (RH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 19/23
DENT & BUCKLE CHART: FAN COWL & TR SLEEVE OUTER SKIN (RH ENG)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 20/23
DENT & BUCKLE CHART: SECTION 41 (LH VIEW)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 21/23
DENT & BUCKLE CHART: FAN COWL & TR SLEEVE OUTER SKIN (LH ENG)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 22/23
DENT & BUCKLE CHART: VERTICAL STABILIZER

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:09 Page 23/23
DENT & BUCKLE CHART: AIRCRAFT BOTTOM VIEW (SECTION 43)

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:07 Page 1 / 10

Aircraft Dent & Buckle Repair Details


R = Repetitive Inspection, S = Supersede other Items, M = Major, I = Inside, FCS = Fatigue Critical Structure

VT-MXD (737-737-8)
Item Description Workorder Performed External Ref. No. Damage Type Dimension Notes Entry
Chart ATA References / Type Nature Type Location Date/Sign
Status Issue Date Final
Component Date/Sign
DTA Status / Due Date
9 INLET COWL (RH ENG) 4300642 03.Jan.2021 CORROSION SIDE: RH Within Limit - No further action rqd. 13.Oct.2021
Status: INSPECTED 54-10 FH 1406 SURFACE CORROSION OBSERVED MTLA
Component: 13.Sep.2019 FC 827 WHICH LOCALIZED AT FOLLOWING ---
314A6100-10/000567 LOCATIONS AT OUTER LIP SKIN OF
--- NOSE COWL ASSEMBLY :
(1)LOCATION 0900 LENGTH 6" AND
WIDTH 2"
(2)LOCATION 0730 LENGTH 14" AND
WIDTH 12"
(3) LOCATION 0630 LENGTH 18" AND
WIDTH 14"
(4) LOCATION 0530 LENGTH 8" AND
WIDTH 2"
(5) LOCATION 0300 LENGTH 6" AND
WIDTH 5"
MAPPING CARRIED OUT AS PER SRM
54-10-01.

ALL SAID CORROSION REMOVED AND


MAPPED AS PER 737-8
SRM54-10-01-1A-1 ALLOWABLE DAMAGE
1.POST REMOVAL INSPECTION CARRIED
OUT FOUND SATISFACTORY.

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:07 Page 2 / 10

Item Description Workorder Performed External Ref. No. Damage Type Dimension Notes Entry
Chart ATA References / Type Nature Type Location Date/Sign
Status Issue Date Final
Component Date/Sign
DTA Status / Due Date
10 INLET COWL (RH ENG) 4300642 03.Jan.2021 CORROSION SIDE: RH Within Limit - No further action rqd. 13.Oct.2021
Status: INSPECTED 54-10 FH 1406 SURFACE CORROSION OBSERVED MTLA
Component: 13.Sep.2019 FC 827 WHICH LOCALIZED AT FOLLOWING ---
314A6100-10/000567 LOCATIONS AT OUTER LIP SKIN OF
--- NOSE COWL ASSEMBLY :
(1)LOCATION 0900 LENGTH 6" AND
WIDTH 2" (2)LOCATION 0730
LENGTH 14" AND WIDTH 12" (3)
LOCATION 0630 LENGTH 18" AND
WIDTH 14" (4) LOCATION 0530
LENGTH 8" AND WIDTH 2" (5)
LOCATION 0300 LENGTH 6" AND WIDTH
5"
MAPPING CARRIED OUT AS PER SRM
54-10-01.

ALL SAID CORROSION REMOVED AND


MAPPED AS PER 737-8
SRM54-10-01-1A-1 ALLOWABLE DAMAGE
1.POST REMOVAL INSPECTION CARRIED
OUT FOUND SATISFACTORY.

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:07 Page 3 / 10

Item Description Workorder Performed External Ref. No. Damage Type Dimension Notes Entry
Chart ATA References / Type Nature Type Location Date/Sign
Status Issue Date Final
Component Date/Sign
DTA Status / Due Date
11 INLET COWL (RH ENG) 4300642 03.Jan.2021 CORROSION SIDE: RH Within Limit - No further action rqd. 13.Oct.2021
Status: INSPECTED 54-10 FH 1406 SURFACE CORROSION OBSERVED MTLA
Component: 13.Sep.2019 FC 827 WHICH LOCALIZED AT FOLLOWING ---
314A6100-10/000567 LOCATIONS AT OUTER LIP SKIN OF
--- NOSE COWL ASSEMBLY :
(1)LOCATION 0900 LENGTH 6" AND
WIDTH 2" (2)LOCATION 0730
LENGTH 14" AND WIDTH 12" (3)
LOCATION 0630 LENGTH 18" AND
WIDTH 14" (4) LOCATION 0530
LENGTH 8" AND WIDTH 2" (5)
LOCATION 0300 LENGTH 6" AND WIDTH
5"
MAPPING CARRIED OUT AS PER SRM
54-10-01.

ALL SAID CORROSION REMOVED AND


MAPPED AS PER 737-8
SRM54-10-01-1A-1 ALLOWABLE DAMAGE
1.POST REMOVAL INSPECTION CARRIED
OUT FOUND SATISFACTORY.

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:07 Page 4 / 10

Item Description Workorder Performed External Ref. No. Damage Type Dimension Notes Entry
Chart ATA References / Type Nature Type Location Date/Sign
Status Issue Date Final
Component Date/Sign
DTA Status / Due Date
12 INLET COWL (RH ENG) 4300642 03.Jan.2021 CORROSION SIDE: RH Within Limit - No further action rqd. 13.Oct.2021
Status: INSPECTED 54-10 FH 1406 SURFACE CORROSION OBSERVED MTLA
Component: 13.Sep.2019 FC 827 WHICH LOCALIZED AT FOLLOWING ---
314A6100-10/000567 LOCATIONS AT OUTER LIP SKIN OF
--- NOSE COWL ASSEMBLY :
(1)LOCATION 0900 LENGTH 6" AND
WIDTH 2" (2)LOCATION 0730
LENGTH 14" AND WIDTH 12" (3)
LOCATION 0630 LENGTH 18" AND
WIDTH 14" (4) LOCATION 0530
LENGTH 8" AND WIDTH 2" (5)
LOCATION 0300 LENGTH 6" AND WIDTH
5"
MAPPING CARRIED OUT AS PER SRM
54-10-01.

ALL SAID CORROSION REMOVED AND


MAPPED AS PER 737-8
SRM54-10-01-1A-1 ALLOWABLE DAMAGE
1.POST REMOVAL INSPECTION CARRIED
OUT FOUND SATISFACTORY.

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:07 Page 5 / 10

Item Description Workorder Performed External Ref. No. Damage Type Dimension Notes Entry
Chart ATA References / Type Nature Type Location Date/Sign
Status Issue Date Final
Component Date/Sign
DTA Status / Due Date
13 INLET COWL (RH ENG) 4300642 03.Jan.2021 CORROSION SIDE: RH Within Limit - No further action rqd. 13.Oct.2021
Status: INSPECTED 54-10 FH 1406 SURFACE CORROSION OBSERVED MTLA
Component: 13.Sep.2019 FC 827 WHICH LOCALIZED AT FOLLOWING ---
314A6100-10/000567 LOCATIONS AT OUTER LIP SKIN OF
--- NOSE COWL ASSEMBLY :
(1)LOCATION 0900 LENGTH 6" AND
WIDTH 2" (2)LOCATION 0730
LENGTH 14" AND WIDTH 12" (3)
LOCATION 0630 LENGTH 18" AND
WIDTH 14" (4) LOCATION 0530
LENGTH 8" AND WIDTH 2" (5)
LOCATION 0300 LENGTH 6" AND WIDTH
5"
MAPPING CARRIED OUT AS PER SRM
54-10-01.

ALL SAID CORROSION REMOVED AND


MAPPED AS PER 737-8
SRM54-10-01-1A-1 ALLOWABLE DAMAGE
1.POST REMOVAL INSPECTION CARRIED
OUT FOUND SATISFACTORY.

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:07 Page 6 / 10

Item Description Workorder Performed External Ref. No. Damage Type Dimension Notes Entry
Chart ATA References / Type Nature Type Location Date/Sign
Status Issue Date Final
Component Date/Sign
DTA Status / Due Date
16 INLET COWL (RH ENG) 5187212 04.Jan.2021 CORROSION SIDE: RH Within Limit - No further action rqd. 08.Oct.2021
Status: INSPECTED 54-00 FH 1406 RH ENGINE INLET LIP CORROSION MTLA
Component: 17.Jul.2020 FC 827 REPAIR AND MAPPING CARRIED OUT AS ---
314A6100-10/000567 PER 737-8 SRM54-10-01-1A-1
--- ALLOWABLE DAMAGE 1.POST REMOVAL
INSPECTION CARRIED OUT FOUND
SATISFACTORY. CORROSION REPAIR
AND MAPPING DETAIL AS BELOW:-
LOCATION(FWD.LOOKING AFT)
SIZE

LENGTH
WIDTH
1)1 O"CLOCK OUT SIDE FWD.

9.5 INCH 3 INCH


2)BETWEEN 4O"CLOCK TO 5 O"CLOCK
OUTSIDE FWD.
21.3 INCH 4.2 INCH
3)9 O"CLOCK OUT SIDE FWD.

20.5 INCH 8 INCH

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:07 Page 7 / 10

Item Description Workorder Performed External Ref. No. Damage Type Dimension Notes Entry
Chart ATA References / Type Nature Type Location Date/Sign
Status Issue Date Final
Component Date/Sign
DTA Status / Due Date
17 INLET COWL (RH ENG) 5187212 04.Jan.2021 CORROSION SIDE: RH Within Limit - No further action rqd. 08.Oct.2021
Status: INSPECTED 54-00 FH 1406 RH ENGINE INLET LIP CORROSION MTLA
Component: 17.Jul.2020 FC 827 REPAIR AND MAPPING CARRIED OUT AS ---
314A6100-10/000567 PER 737-8 SRM54-10-01-1A-1
--- ALLOWABLE DAMAGE 1.POST REMOVAL
INSPECTION CARRIED OUT FOUND
SATISFACTORY. CORROSION REPAIR
AND MAPPING DETAIL AS BELOW:-
LOCATION(FWD.LOOKING AFT)
SIZE

LENGTH WIDTH
1)1 O"CLOCK OUT SIDE FWD.

9.5 INCH 3 INCH


2)BETWEEN 4O"CLOCK TO 5 O"CLOCK
OUTSIDE FWD.
21.3 INCH 4.2 INCH
3)9 O"CLOCK OUT SIDE FWD.

20.5 INCH 8 INCH

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:07 Page 8 / 10

Item Description Workorder Performed External Ref. No. Damage Type Dimension Notes Entry
Chart ATA References / Type Nature Type Location Date/Sign
Status Issue Date Final
Component Date/Sign
DTA Status / Due Date
18 INLET COWL (RH ENG) 5187212 04.Jan.2021 CORROSION SIDE: RH RH ENGINE INLET LIP CORROSION 08.Oct.2021
Status: INSPECTED 54-00 FH 1406 REPAIR AND MAPPING CARRIED OUT AS MTLA
Component: 17.Jul.2020 FC 827 PER 737-8 SRM54-10-01-1A-1 ---
314A6100-10/000567 ALLOWABLE DAMAGE 1.POST REMOVAL
--- INSPECTION CARRIED OUT FOUND
SATISFACTORY. CORROSION REPAIR
AND MAPPING DETAIL AS BELOW:-
LOCATION(FWD.LOOKING AFT)
SIZE

LENGTH
WIDTH
1)1 O"CLOCK OUT SIDE FWD.

9.5 INCH 3 INCH


2)BETWEEN 4O"CLOCK TO 5 O"CLOCK
OUTSIDE FWD.
21.3 INCH 4.2 INCH
3)9 O"CLOCK OUT SIDE FWD.

20.5 INCH 8 INCH


19 corrosion 54-00 WO NO 4298337 AND CORROSION Within Limit - No further action rqd. 10.Oct.2021
INLET COWL (LH ENG) 5187233 INSPECTION SURFACE CORROSION OBSERVED RVRS
Status: Repaired FINDING WHICH LOCALIZED AT FOLLOWING ---
Component: LOCATIONS AT OUTER LIP SKIN OF
314A6100-12/000741 NOSE COWL ASSEMBLY :
--- (1)LOCATION 0300 LENGTH 9" AND
WIDTH 7"
(2)LOCATION 0600 LENGTH 20" AND
WIDTH 7"
(3)LOCATION 0600 LENGTH 12" AND
WIDTH 7"
MAPPING CARRIED OUT AS PER SRM
54-10-01.

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:07 Page 9 / 10

Item Description Workorder Performed External Ref. No. Damage Type Dimension Notes Entry
Chart ATA References / Type Nature Type Location Date/Sign
Status Issue Date Final
Component Date/Sign
DTA Status / Due Date
20 corrosion 54-00 REF 5`187`233 CORROSION AFTER REWORK Within Limit - No further action rqd. 10.Oct.2021
INLET COWL (LH ENG) INSPECTION MEASUREMENT FOUND LH ENGINE INLET LIP CORROSION RVRS
Status: Repaired FINDING WITHIN LIMIT PER 737-8 REPAIR AND MAPPING CARRIED OUT AS ---
Component: SRM54-10-01-1A-1 PER 737-8 SRM54-10-01-1A-1
314A6100-12/000741 ALLOWABLE DAMAGE 1. ALLOWABLE DAMAGE 1. POST
--- inlet lip skin REMOVAL INSPECTION CARRIED OUT
FOUND SATISFACTORY. CORROSION
REPAIR AND MAPPING DETAIL AS
BELOW:- ref wo 5`187`233

produced by AMOS www.swiss-as.com


DNDW 08.Aug.2022
Structural Damages on VT-MXD 08:07 Page 10 / 10

Item Description Workorder Performed External Ref. No. Damage Type Dimension Notes Entry
Chart ATA References / Type Nature Type Location Date/Sign
Status Issue Date Final
Component Date/Sign
DTA Status / Due Date

produced by AMOS www.swiss-as.com

You might also like