100w 50kw Wummer Wind Turbine Vertical Axis

pak olar
renewable energy pvt. ltd.

Model: H2.7-500W / H3.1-1000W / H3.8-2000W
Hummer 500W wind turbine is designed for the off-grid system which uses a battery bank to store the
electricity. It can drive a load equal to or less than 500W or a pump equal to or less than 370W.
Hummer 1000W wind turbine can be applied in both the on-grid system and the off-grid system which uses a
battery bank to store the electricity. It can drive a load equal to or less than 1000W.
I. Features:
1. Supercritical generator
Hummer’s wind generator adopts the supercritical technology which won a gold
award in the 37th Salon Eureka in Brussels and an U.S. patent. This technology
significantly reduces generator’s weight and size down to 20% to 30% of the
traditional one, and the production efficiency is 10% to 30% higher. This ensures that
the generator functions perfectly in small wind condition.
2. SKF bearings
Hummer wind turbine adopts two SKF (Svenska Kullager Fabriken) bearings which
are produced by the largest bearing manufacturer in the world, with the perfect
internal geometric structure, known for its life-time endurance and reliable quality.
Ordinary bearings need to be changed every two or three years, while SKF bearings
can greatly reduce the maintenance costs on this matter.
3. Apt speed control
Hummer small wind turbine adopts the electromagnetic brake and the yawing
mechanism. The electromagnetic brake is used to shut down the wind turbine
manually while the yawing mechanism makes the wind turbine automatically yaw
from the wind direction in order to control the rotation speed of the rotor.
-1-
II. Specifications and power curve :
1. 500W
Rated power (W) 500

Maximum output power (W) 1000
Battery bank voltage (VDC) 24
Cut-in wind speed (m/s) 3
Rated wind speed (m/s) 7
Working wind speed (m/s) 3-25
Survival wind speed (m/s) 50
Generator efficiency >0.78
Wind energy utilizing ratio (Cp) 0.48
Generator type Permanent Magnet Alternator
Generator weight (kg) 6.5
Blade material/quantity GRP/3
Blade diameter (m) Ф2.5
Mast height (m) 6
Over speed control Yawing mechanism + Electromagnetic brake
Shutting down method Manual + Automatic
-2-
2. 1000W
Rated power (W) 1000

Generator weight (kg) 15
Mast height (m) 8
-3-
3. 2000W

Mast height (m) 10
-4-
III. Structure and component parts:
1. Generator Part
The generator part consists of the state-of-the-art supercritical generator, the nose cone and the protection
cover. Due to its small size and low weight the generator is able to be installed inside the nose cone and
before the rotor. This design significantly helps the heat radiation, thus improves the efficiency of the
generator and reduces the energy loss.
2. Nose Cone & Protection Cover
Both are made of the reinforced aluminum alloy. Nose cone is fixed in front of the rotor blades to reduce the
wind resistance and radiate the heat produced by the generator. While the protection cover wraps the joint
part of the rotor and the nose cone and provides extra protection to the generator.
3. SKF Bearings
Two SKF bearings ensure the reliability and the longevity of our generator. They guarantee the operation in
high temperature (150-350ºC) and a long life span reaching up to 60000-100000 hours. User may not change
the bearings during the wind turbine using, thus the maintenance costs will be reduced.
-5-
4. Flange & Blades
The flange is made of fine steel, used to fix the blades to the rotor. The blades are made of glass reinforced
plastic (GRP) and have passed the strict dynamic balance test before shipping, which promise the efficiency
of transforming the wind energy into the mechanical energy.
5. Yawing Mechanism
The mechanism is composed of the 360° rotation yaw shaft, the tail rod and the rudder blade, which are
made of the manganese steel and aluminum alloy. It combines the high strength and the lightness and is able
to react to the gusts rapidly.
6. Multi-function “3 in 1” Inverter Controller
Hummer “3 in 1” inverter as a multi-function controller is made especially for 500W and 1000W systems. It
combines the functions such as rectifying AC into DC, charging the batteries, inverting DC to AC to power the
electrical instruments, and dumping the extra energy which may overload and burn the system, thus
protecting the whole system.
-6-
7. Rectifier/Dump Load Controller & Dump Load Box
The controller controls the process of which the AC produced by wind turbine being rectified into DC and
eventually charges the battery bank when applied in the off-grid power system. It also controls the switching
on and off of the dump load which protects the system against the risk of being overloaded with too much
power.
Metal box design of the dump load helps quickly radiate the heat generated inside the box through the air
convection. So there is no need for an extra fan.
8. Off-grid Inverter and On-grid Inverter
Hummer off-grid inverter inverts DC into AC with stable frequency and voltage, and it filters the noise of the
electrical current as well. It is used in the off-grid power system.
Hummer on-grid inverter adopts MPPT (Maximum Power Point Tracking) technology and IGBT (Insulated
Gate Bipolar Transistor), is able to invert DC with a high power producing capacity and a wider AC voltage
output range. It connects to the public grid and there is no need for any power storage device.
-7-
9. Guyed Mast
Guyed mast is composed of several segments of steel tubes which are galvanized and spray painted. It is
easy to be transported and assembled, especially suitable for the remote area where a crane is not available.
10. Self-supporting Tower
Self-supporting tower is made of fine steel and it is strong enough to resist heavy wind. The surface of the
tower is processed with the hot galvanization and spray paint, thus is able to protect the tower against
corrosion and rust.
IV. Contact Us
Add: Room 302, E2 Building
Hua Yi Science Park, Tian Da Road
Hefei, Anhui, China
TEL for sale: +86-551-63441230 or +86-551-63441231
FAX for sale: +86-551-63442991
E-mail: [email protected]
Website: http://www.chinahummer.cn/
COPYRIGHT RESERVED BY ANHUI HUMMER DYNAMO CO., LTD. VERSION 2012.10.
-8-
Model: H2.7-500W / H3.1-1000W / H3.8-2000W
Hummer 500W wind turbine is designed for the off-grid system which uses a battery bank to store the
electricity. It can drive a load equal to or less than 500W or a pump equal to or less than 370W.
I. Features:
1. Supercritical generator
Hummer’s wind generator adopts the supercritical technology which won a gold
award in the 37th Salon Eureka in Brussels and an U.S. patent. This technology
significantly reduces generator’s weight and size down to 20% to 30% of the
traditional one, and the production efficiency is 10% to 30% higher. This ensures that
the generator functions perfectly in small wind condition.
2. SKF bearings
Hummer wind turbine adopts two SKF (Svenska Kullager Fabriken) bearings which
are produced by the largest bearing manufacturer in the world, with the perfect
internal geometric structure, known for its life-time endurance and reliable quality.
Ordinary bearings need to be changed every two or three years, while SKF bearings
can greatly reduce the maintenance costs on this matter.
3. Apt speed control
Hummer small wind turbine adopts the electromagnetic brake and the yawing
mechanism. The electromagnetic brake is used to shut down the wind turbine
manually while the yawing mechanism makes the wind turbine automatically yaw
from the wind direction in order to control the rotation speed of the rotor.
-1-
II. Specifications and power curve :
1. 500W
Rated power (W) 500

Mast height (m) 6
-2-
2. 1000W

Mast height (m) 8
-3-
3. 2000W

Mast height (m) 10
-4-
1. Generator Part
The generator part consists of the state-of-the-art supercritical generator, the nose cone and the protection
cover. Due to its small size and low weight the generator is able to be installed inside the nose cone and
before the rotor. This design significantly helps the heat radiation, thus improves the efficiency of the
generator and reduces the energy loss.
Both are made of the reinforced aluminum alloy. Nose cone is fixed in front of the rotor blades to reduce the
wind resistance and radiate the heat produced by the generator. While the protection cover wraps the joint
part of the rotor and the nose cone and provides extra protection to the generator.
3. SKF Bearings
Two SKF bearings ensure the reliability and the longevity of our generator. They guarantee the operation in
high temperature (150-350ºC) and a long life span reaching up to 60000-100000 hours. User may not change
the bearings during the wind turbine using, thus the maintenance costs will be reduced.
-5-
4. Flange & Blades
plastic (GRP) and have passed the strict dynamic balance test before shipping, which promise the efficiency
of transforming the wind energy into the mechanical energy.
5. Yawing Mechanism
The mechanism is composed of the 360° rotation yaw shaft, the tail rod and the rudder blade, which are
made of the manganese steel and aluminum alloy. It combines the high strength and the lightness and is able
to react to the gusts rapidly.
6. Multi-function “3 in 1” Inverter Controller
Hummer “3 in 1” inverter as a multi-function controller is made especially for 500W and 1000W systems. It
combines the functions such as rectifying AC into DC, charging the batteries, inverting DC to AC to power the
electrical instruments, and dumping the extra energy which may overload and burn the system, thus
protecting the whole system.
-6-
eventually charges the battery bank when applied in the off-grid power system. It also controls the switching
on and off of the dump load which protects the system against the risk of being overloaded with too much
power.
Metal box design of the dump load helps quickly radiate the heat generated inside the box through the air
8. Off-grid Inverter and On-grid Inverter
Hummer off-grid inverter inverts DC into AC with stable frequency and voltage, and it filters the noise of the
electrical current as well. It is used in the off-grid power system.
-7-
9. Guyed Mast
easy to be transported and assembled, especially suitable for the remote area where a crane is not available.
10. Self-supporting Tower
Self-supporting tower is made of fine steel and it is strong enough to resist heavy wind. The surface of the
corrosion and rust.
IV. Contact Us
Hua Yi Science Park, Tian Da Road
Hefei, Anhui, China
TEL for sale: +86-551-63441230 or +86-551-63441231
FAX for sale: +86-551-63442991
Website: http://www.chinahummer.cn/
-8-
Model: H4.6-3kW / H6.4-5kW / H8.0-10kW / H9.0-20kW
Hummer 3kW / 5kW / 10kW / 20kW wind turbines can be applied in both on-grid and off-grid systems.
I. Features:
1. SCF Supercritical generator
Hummer’s wind generator adopts SCF supercritical technology which won a gold
award in the 37th Salon Eureka in Brussels. This technology significantly reduces
generator’s weight and size down to 20% to 30% of the traditional one, and the
production efficiency is 10% to 30% higher. This ensures that the generator
functions perfectly in small wind condition.
2. SKF bearings
Hummer wind turbine adopts two SKF (Svenska Kullager Fabriken) bearings
which are produced by the largest bearing manufacturer in the world, with the
perfect internal geometric structure, known for its life-time endurance and reliable
quality. Ordinary bearings need to be changed every two or three years, while SKF
bearings can greatly reduce the maintenance costs on this matter.
3. PLC integrated with Siemens module
Hummer wind turbine’s controlling system adopts the smart touch-screen PLC
(Programmable Logic Controller) which is integrated with Siemens controlling unit.
The PLC will alarm and adjust the abnormal running status of the wind turbine
automatically both timely and efficiently. Siemens module offers high reliability to
our PLC and its customers worldwide can testify for that.
4. Low noise
The design of the rotor blade of Hummer wind turbine absorbs the highlights of the
small aircraft’s airfoil, which is compliance with the aerodynamic standards. It
provides a more aesthetic look and a higher efficiency and reduces the noise
production as much as possible.
5. Triple braking protection
Hummer wind turbine generally adopts the yawing system and the electromagnetic
braking system to regulate the rotation of the wind turbine. Besides, customer can
order the hydraulic braking system as well as a third protection. It is easy and
convenient to shut down the whole system both manually and automatically.
-1-
II. Specifications and power curve:
1. 3kW

Cut-in wind speed (m/s) 2.5
Over speed control Yawing + Electromagnetic brake / Hydraulic brake (optional)
-2-
2. 5kW

-3-
3. 10kW

-4-
4. 20kW

Rated wind speed (m/s) 11.5
-5-
1. Generator Part
It is composed of the patented SCF generator, the nose cone, and the protection cover. Hummer adopts the
state-of-the-art SCF supercritical generator, which is installed in the nose cone, easy to radiate heat and
reduce wind resistance. It is made of high-efficiency magnetic materials, special copper alloy, high-strength
stainless steel and aeronautic aluminum alloys, which is extremely light in weight and small in size, but with
higher power producing efficiency.
Both of them are made of the reinforced aluminum alloy. Nose cone is fixed in front of the rotor blades to
reduce the wind resistance and radiate the heat produced by the generator. While the protection cover
between the rotor blades and the nose cone to provide extra protection to the generator.
-6-
3. SKF Bearings
Two SKF bearings ensure the reliability the longevity of our generator. Wide temperature ranges: operation in
the high temperature (150-350ºC). Long life span, reach up to 60000-100000 hours. User may not change
the bearing during the wind turbine using. It can greatly reduce the maintenance costs.
4. Flange & Blades
plastic; efficiently turn the wind energy into the mechanical energy. Every set of the three blades has passed
the strict balance test before the shipping. It is important to fix the blades together which belongs to one set to
the flange and never mix them up with other blades which belongs to another wind turbine.
5. Yaw Shaft
It is made of fine steel and used to connect the generator and the blades to the tower. Powered with a 24V
motor and integrated with a gear box, which are able to regulate the direction of the generator.
-7-
6. Dogvane & Anemometer
They receive the signals of the wind direction and the wind speed.
The dogvane reads the average value of the wind direction every 120 seconds. If the angle between the
dogvane and the wind generator axis surpasses 10°, the 24V motor will drive the yaw shaft to turn and follow
the wind direction automatically.
The anemometer measures the real-time wind speed. If the wind blows non-stop over 3m/s during 20
seconds, the automatic wind tracking program will start to make the rotor blades surface face the wind
correctly; if the wind speed drops below 3m/s, the tracking program will turn to stand-by.
7. Off-grid Inverter & On-grid Inverter
Hummer off-grid inverter adopts SPWM (Sinusoidal Pulse Width Modulation) technology, is able to invert DC
with higher efficiency into AC with stable frequency and voltage, and filters the noise as well. It is used in the
off-grid power system.
-8-
8. Siemens Module PLC
Hummer PLC (Programmable Logic Controller) adopts the Siemens controlling module and is equipped with
a touch screen. It can alarm and adjust the abnormal running status of the wind turbine automatically.
Siemens module offers high reliability to our PLC and its customers worldwide can testify for that. It is easy to
control and operate your wind turbine via our PLC easily and efficiently.
eventually charges the battery bank with DC. It also controls the switching on and off of the dump load to
protect the system against the risk of being overloaded with too much power.
Metal box design of the dump load radiates the heat of the resistance inside quickly via the air convection. So
there is no need for an extra fan.
-9-
10. Guyed Mast (500W to 5kW)
easy to be transported and assembled, especially suitable in the remote area where a crane is not available.
11. Freestanding (Self-supporting) Tower (500W to 100kW)
Freestanding tower is made of fine steel and it is strong enough to resist heavy wind. The surface of the tower
is processed with the hot galvanization and spray paint, thus is able to protect the tower against corrosion
and rust.
12. Hydraulic Tower System (2kW to 50kW)
Thanks to the hydraulic pump system at the foot of the tower, it is easy to set up or lay down the tower just by
pressing buttons. It is a wise choice in the remote area where a crane is not available.
- 10 -
IV. Contact Us
Tian Da Road Hua Yi Science Park
Hefei, Anhui, China
TEL for sale: +86-551-63441230
+86-551-63441231
FAX for sale: +86-551-63442991
Website: http://www.chinahummer.cn
- 11 -
Model: H4.6-3kW / H6.4-5kW / H8.0-10kW / H9.0-20kW
Hummer 3kW / 5kW / 10kW / 20kW wind turbines can be applied in both on-grid and off-grid systems.
I. Features:
award in the 37th Salon Eureka in Brussels. This technology significantly reduces
generator’s weight and size down to 20% to 30% of the traditional one, and the
production efficiency is 10% to 30% higher. This ensures that the generator
functions perfectly in small wind condition.
2. SKF bearings
Hummer wind turbine adopts two SKF (Svenska Kullager Fabriken) bearings
which are produced by the largest bearing manufacturer in the world, with the
perfect internal geometric structure, known for its life-time endurance and reliable
quality. Ordinary bearings need to be changed every two or three years, while SKF
bearings can greatly reduce the maintenance costs on this matter.
Hummer wind turbine’s controlling system adopts the smart touch-screen PLC
(Programmable Logic Controller) which is integrated with Siemens controlling unit.
The PLC will alarm and adjust the abnormal running status of the wind turbine
automatically both timely and efficiently. Siemens module offers high reliability to
our PLC and its customers worldwide can testify for that.
4. Low noise
The design of the rotor blade of Hummer wind turbine absorbs the highlights of the
small aircraft’s airfoil, which is compliance with the aerodynamic standards. It
provides a more aesthetic look and a higher efficiency and reduces the noise
production as much as possible.
Hummer wind turbine generally adopts the yawing system and the electromagnetic
braking system to regulate the rotation of the wind turbine. Besides, customer can
order the hydraulic braking system as well as a third protection. It is easy and
convenient to shut down the whole system both manually and automatically.
-1-
1. 3kW

-2-
2. 5kW

-3-
3. 10kW

-4-
4. 20kW

Rated wind speed (m/s) 11.5
-5-
1. Generator Part
It is composed of the patented SCF generator, the nose cone, and the protection cover. Hummer adopts the
state-of-the-art SCF supercritical generator, which is installed in the nose cone, easy to radiate heat and
reduce wind resistance. It is made of high-efficiency magnetic materials, special copper alloy, high-strength
stainless steel and aeronautic aluminum alloys, which is extremely light in weight and small in size, but with
higher power producing efficiency.
Both of them are made of the reinforced aluminum alloy. Nose cone is fixed in front of the rotor blades to
reduce the wind resistance and radiate the heat produced by the generator. While the protection cover
between the rotor blades and the nose cone to provide extra protection to the generator.
-6-
3. SKF Bearings
Two SKF bearings ensure the reliability the longevity of our generator. Wide temperature ranges: operation in
the high temperature (150-350ºC). Long life span, reach up to 60000-100000 hours. User may not change
the bearing during the wind turbine using. It can greatly reduce the maintenance costs.
4. Flange & Blades
plastic; efficiently turn the wind energy into the mechanical energy. Every set of the three blades has passed
the strict balance test before the shipping. It is important to fix the blades together which belongs to one set to
the flange and never mix them up with other blades which belongs to another wind turbine.
5. Yaw Shaft
It is made of fine steel and used to connect the generator and the blades to the tower. Powered with a 24V
motor and integrated with a gear box, which are able to regulate the direction of the generator.
-7-
The dogvane reads the average value of the wind direction every 120 seconds. If the angle between the
dogvane and the wind generator axis surpasses 10°, the 24V motor will drive the yaw shaft to turn and follow
the wind direction automatically.
Hummer off-grid inverter adopts SPWM (Sinusoidal Pulse Width Modulation) technology, is able to invert DC
with higher efficiency into AC with stable frequency and voltage, and filters the noise as well. It is used in the
off-grid power system.
-8-
Hummer PLC (Programmable Logic Controller) adopts the Siemens controlling module and is equipped with
a touch screen. It can alarm and adjust the abnormal running status of the wind turbine automatically.
Siemens module offers high reliability to our PLC and its customers worldwide can testify for that. It is easy to
control and operate your wind turbine via our PLC easily and efficiently.
eventually charges the battery bank with DC. It also controls the switching on and off of the dump load to
protect the system against the risk of being overloaded with too much power.
Metal box design of the dump load radiates the heat of the resistance inside quickly via the air convection. So
there is no need for an extra fan.
-9-
10. Guyed Mast (500W to 5kW)
easy to be transported and assembled, especially suitable in the remote area where a crane is not available.
Freestanding tower is made of fine steel and it is strong enough to resist heavy wind. The surface of the tower
is processed with the hot galvanization and spray paint, thus is able to protect the tower against corrosion
and rust.
12. Hydraulic Tower System (2kW to 50kW)
Thanks to the hydraulic pump system at the foot of the tower, it is easy to set up or lay down the tower just by
pressing buttons. It is a wise choice in the remote area where a crane is not available.
- 10 -
IV. Contact Us
Tian Da Road Hua Yi Science Park
Hefei, Anhui, China
TEL for sale: +86-551-63441230
+86-551-63441231
FAX for sale: +86-551-63442991
- 11 -
Model: H10.0-30kW
Hummer 30kW wind turbine can be applied in both on-grid and off-grid systems.
I. Features:

award in the 37th Salon Eureka in Brussels. This technology makes real that the
weight and size of hummer 30kW generator are one-half of the traditional one,
and the generator efficiency is improved from 0.22 ~ 0.28 to 0.42.
This ensures that the generator functions perfectly in small wind condition.
2. NSK bearings
HUMMER 30kW wind turbine adopts the NSK bearings which are produced by
the renowned bearing manufacturer in the world, with the perfect internal
geometric structure, known for its life-time endurance and reliable quality. As
well as enabling smooth and quiet rotation, they also perform an important
function by taking on the motor's load.
HUMMER wind turbine’s controlling system adopts the smart touch-screen
PLC (Programmable Logic Controller) which is integrated with Siemens
controlling unit. The PLC will alarm and adjust the abnormal running status of
the wind turbine automatically both timely and efficiently. Siemens module
offers high reliability to our PLC and its customers worldwide can testify for that.
4. Low noise
The design of the rotor blade of HUMMER wind turbine absorbs the highlights
of the small aircraft’s airfoil, which is compliance with the aerodynamic
standards. It provides a more aesthetic look and a higher efficiency and
reduces the noise production as much as possible.
HUMMER wind turbine generally adopts the yawing system and the
electromagnetic braking system to regulate the rotation of the wind turbine.
Besides, customer can order the hydraulic braking system as well as a third
protection. It is easy and convenient to shut down the whole system both
manually and automatically.
-1-

Battery bank voltage (Vdc) 360
Blade material/quantity GRP/ 3
Blade diameter (m) Ø10.0
Over speed control Yawing+ electromagnetism braking+ hydraulic Braking
Shutting down method Manual Operation+ Automatic
-2-

1. Generator Part
It is composed of the patented SCF generator, the nose cone, and the protection cover. HUMMER
adopts the state-of-the-art SCF supercritical generator, which is installed in the hub, easy to radiate
heat and reduce wind resistance. It is made of high-efficiency magnetic materials, special copper alloy,
high-strength stainless steel and aeronautic aluminum alloys, which is extremely light in weight and
small in size, but with higher power producing efficiency.
-3-

Both of them are made of the reinforced aluminum alloy. Nose cone is fixed in front of the rotor blades
to reduce the wind resistance and radiate the heat produced by the generator. While the protection
cover between the rotor blades and the nose cone to provide extra protection to the generator.
3. NSK Bearings
The NSK bearings ensure the reliability and the longevity of our generator and greatly reduce the
maintenance costs.
4. Flange & Blades

The flange is made of fine steel, used to fix the blades to the rotor. The blades are made of glass
reinforced plastic; efficiently turn the wind energy into the mechanical energy. Every set of the three
blades has passed the strict balance test before the shipping. It is important to fix the blades together
which belongs to one set to the flange and never mix them up with other blades which belongs to
another wind turbine.
-4-

5. Yaw Shaft
It is made of fine steel and used to connect the generator and the blades to the tower. Powered with a
24V motor and integrated with a gear box, which are able to regulate the direction of the generator.

The dogvane reads the average value of the wind direction every 120 seconds. If the angle between
the dogvane and the wind generator axis surpasses 10°, the 24V motor will drive the yaw shaft to turn
and follow the wind direction automatically.

Hummer off-grid inverter adopts SPWM (Sinusoidal Pulse Width Modulation) technology, is able to
invert DC with higher efficiency into AC with stable frequency and voltage, and filters the noise as well.
It is used in the off-grid power system.
Hummer on-grid inverter adopts MPPT (Maximum Power Point Tracking) technology and IGBT
(Insulated Gate Bipolar Transistor), is able to invert DC with a high power producing capacity and a
wider AC voltage output range. It connects to the public grid and there is no need for any power storage
device.
Off-grid On-grid
-5-

HUMMER PLC (Programmable Logic Controller) adopts the Siemens controlling module and is
equipped with a touch screen. It can alarm and adjust the abnormal running status of the wind turbine
automatically. Siemens module offers high reliability to our PLC and its customers worldwide can testify
for that. It is easy to control and operate your wind turbine via our PLC easily and efficiently.

The controller controls the process of which the AC produced by wind turbine being rectified into DC
and eventually charges the battery bank with DC. It also controls the switching on and off of the dump
load to protect the system against the risk of being overloaded with too much power.
Metal box design of the dump load radiates the heat of the resistance inside quickly via the air
-6-

Freestanding tower is made of fine steel and it is strong enough to resist heavy wind. The surface of the
corrosion and rust.
11. Hydraulic Tower System (500W to 100kW)

Thanks to the hydraulic pump system at the foot of the tower, it is easy to set up or lay down the tower
just by pressing buttons. It is a wise choice in the remote area where a crane is not available.
IV. Contact Us
Factory Add: Lujiang County Economic Development
Zone, Anhui Province, China
Marketing Center: Room 302, E2 Building, Hua Yi Science
Park, Tian Da Road, Hefei, Anhui, China
TEL for sale: +86-551-63441230
+86-551-63441231
-7-

100w 50kw Wummer Wind Turbine Vertical Axis

Uploaded by

Copyright:

Available Formats

100w 50kw Wummer Wind Turbine Vertical Axis

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

100w 50kw Wummer Wind Turbine Vertical Axis

Uploaded by

Copyright:

Available Formats

pak olar

renewable energy pvt. ltd.

3. Apt speed control

Rated power (W) 500

Rated power (W) 1000

Rated power (W) 2000

2. Nose Cone & Protection Cover

6. Multi-function “3 in 1” Inverter Controller

8. Off-grid Inverter and On-grid Inverter

10. Self-supporting Tower

COPYRIGHT RESERVED BY ANHUI HUMMER DYNAMO CO., LTD. VERSION 2012.10.

3. Apt speed control

Rated power (W) 500

Rated power (W) 1000

Rated power (W) 2000

2. Nose Cone & Protection Cover

6. Multi-function “3 in 1” Inverter Controller

8. Off-grid Inverter and On-grid Inverter

10. Self-supporting Tower

COPYRIGHT RESERVED BY ANHUI HUMMER DYNAMO CO., LTD. VERSION 2012.10.

3. PLC integrated with Siemens module

5. Triple braking protection

Rated power (W) 3000

Rated power (W) 5000

Rated power (W) 10000

Rated power (W) 20000

2. Nose Cone & Protection Cover

4. Flange & Blades

7. Off-grid Inverter & On-grid Inverter

9. Rectifier/Dump Load Controller & Dump Load Box

11. Freestanding (Self-supporting) Tower (500W to 100kW)

12. Hydraulic Tower System (2kW to 50kW)

3. PLC integrated with Siemens module

5. Triple braking protection

Rated power (W) 3000

Rated power (W) 5000

Rated power (W) 10000

Rated power (W) 20000

2. Nose Cone & Protection Cover

4. Flange & Blades

7. Off-grid Inverter & On-grid Inverter

9. Rectifier/Dump Load Controller & Dump Load Box

11. Freestanding (Self-supporting) Tower (500W to 100kW)

12. Hydraulic Tower System (2kW to 50kW)

1. SCF Supercritical generator

5. Triple braking protection

COPYRIGHT RESERVED BY ANHUI HUMMER DYNAMO CO., LTD. VERSION 2012.09.

COPYRIGHT RESERVED BY ANHUI HUMMER DYNAMO CO., LTD. VERSION 2012.09.

COPYRIGHT RESERVED BY ANHUI HUMMER DYNAMO CO., LTD. VERSION 2012.09.

4. Flange & Blades

COPYRIGHT RESERVED BY ANHUI HUMMER DYNAMO CO., LTD. VERSION 2012.09.

6. Dogvane & Anemometer

7. Off-grid Inverter & On-grid Inverter

COPYRIGHT RESERVED BY ANHUI HUMMER DYNAMO CO., LTD. VERSION 2012.09.

9. Rectifier/Dump Load Controller & Dump Load Box

COPYRIGHT RESERVED BY ANHUI HUMMER DYNAMO CO., LTD. VERSION 2012.09.

11. Hydraulic Tower System (500W to 100kW)

COPYRIGHT RESERVED BY ANHUI HUMMER DYNAMO CO., LTD. VERSION 2012.09.

You might also like