Speed Slalom Lines Drawing
Speed Slalom Lines Drawing
Suggested procedure:
1-Set down first line of cones, mark from 0m every 0,8 m until 16m (finish point, 21st mark)
2-From the sixth mark (4 m) measure going in diagonal a point distant 5m. Mark the measure with a little
arch.
5m
3- From the zero point measure 3m, find intersection with the previous arch and mark it. This is the zero
point of the second line. This point is at 3m distance from the zero of the first cone line and the line that
meets the two zero points is perpendicular to the first cone line.
5m
3m
0 16m
3m
5-Double check the diagonals between 0m and 16m (it should be 16,278m for usual distance of 3m)
8- Using strong and non slippery tape, lay down tape stripes for starting box and finish line. Double check
you use the correct edge of the tape. Lay down the first cone line aligning the first edge of the tape with the
front border of the cone.
back starting line starting line 1st cone line finish line
12m 16m