BMS VAC Installation Guide

Editor: KOLBE

Version: BMS 4.34.0

CHANGE 0
01. 2019

1-1
BMS VAC Installation Guide
CHANGE 0

1 INTRODUCTION
We provide ready to use VAC profiles. They are kept very simple just to give you a quick start using voice
activated commands (VAC) software with Falcon BMS. Of course you can adjust it to your liking.

File: BMS_VAC_(QWERTY).xml

BMS_VAC_(QWERTZ).xml

BMS_VAC_(AZERTY).xml

Version: v1.0

VAC Software: v3.2.0

As you can see you can chose one of three available profiles depending on your locale. You don’t need to save the
.xml file to a specific folder. Just import it in VAC Builder (chose VAC Profile (XML) option).

The imported profiles will then be available in “Load Profile”. This is also the case in the VAC System program
which starts your voice recognition software.

1-2
BMS VAC Installation Guide
CHANGE 0

It is assumed that you have at least basic knowledge using the VAC software. For detailed instructions read the
integrated help

or visit the software vendors homepage:

http://www.dwvac.com/

VAC is activated via the key “F8”. The activation method is set to “default” which means you have to depress the
activation key while speaking the activation phrase. Be advised that there are possible conflicts in case you also
use TrackIR.

1-3
BMS VAC Installation Guide
CHANGE 0

2 COMMAND LIST
Below you find a list of all actions and phrases along with the corresponding QWERTY, QWERTZ and AZERTY
keystrokes.

Action: Install / Remove EPU Ground Safety Pin

QWERTY: t1 | QWERTZ: t1 | AZERTY: t1
Phrase 1: Ground remove safety pin
Phrase 2: Ground remove E P U safety pin
Phrase 3: Chief remove safety pin
Phrase 4: Chief remove E P U safety pin
Phrase 5: Remove safety pin
Phrase 6: Remove E P U safety pin
Phrase 7: Ground install safety pin
Phrase 8: Ground install E P U safety pin
Phrase 9: Chief install safety pin
Phrase 10: Chief install E P U safety pin
Phrase 11: Install safety pin
Phrase 12: Install E P U safety pin
Action: Install / Remove Chocks
QWERTY: t2 | QWERTZ: t2 | AZERTY: t2
Phrase 1: Ground remove chocks
Phrase 2: Ground chocks away
Phrase 3: Chief remove chocks
Phrase 4: Chief chocks away
Phrase 5: Remove chocks
Phrase 6: Chocks away
Phrase 7: Ground install chocks
Phrase 8: Chief install chocks
Phrase 9: Install chocks
Action: Request Taxi for Departure
QWERTY: t3 | QWERTZ: t3 | AZERTY: t3
Phrase 1: Ground request taxi
Phrase 2: Ground request taxi for departure
Phrase 3: Request taxi
Phrase 4: Request taxi for departure
Action: Request Taxi Back to Ramp
QWERTY: t4 | QWERTZ: t4 | AZERTY: t4
Phrase 1: Ground request taxi back
Phrase 2: Ground request taxi back to ramp
Phrase 3: Ground request taxi to apron
Phrase 4: Ground request taxi to the apron
Phrase 5: Request taxi back
Phrase 6: Request taxi back to ramp
Phrase 7: Request taxi to apron
Phrase 8: Request taxi to the apron

2-4
BMS VAC Installation Guide
CHANGE 0

Action: Request Hotpit Refuel

QWERTY: t5 | QWERTZ: t5 | AZERTY: t5
Phrase 1: Ground request hotpit refuel
Phrase 2: Request hotpit refuel
Action: Say Again
QWERTY: t6 | QWERTZ: t6 | AZERTY: t6
Phrase 1: Ground repeat
Phrase 2: Ground say again
Phrase 3: Ground repeat last transmission
Action: Recharge JFS
QWERTY: t7 | QWERTZ: t7 | AZERTY: t7
Phrase 1: Ground Recharge JFS
Phrase 2: Chief Recharge JFS
Phrase 3: Recharge JFS
Action: Ready for Departure
QWERTY: tt1 | QWERTZ: tt1 | AZERTY: tt1
Phrase 1: Tower ready for departure
Phrase 2: Tower request early departure
Phrase 3: Tower request rolling takeoff
Phrase 4: Ready for departure
Phrase 5: Request early departure
Phrase 6: Request rolling takeoff
Action: Request Landing
QWERTY: tt2 | QWERTZ: tt2 | AZERTY: tt2
Phrase 1: Tower Request Landing
Phrase 2: Request Landing
Action: Request Formation Landing
QWERTY: tt3 | QWERTZ: tt3 | AZERTY: tt3
Phrase 1: Tower Request Formation Landing
Phrase 2: Request Formation Landing
Action: Report on Final
QWERTY: tt4 | QWERTZ: tt4 | AZERTY: tt4
Phrase 1: Tower on final
Phrase 2: Tower short final
Phrase 3: On final
Phrase 4: Short final
Action: Report Overhead Break (AI wingmen)
QWERTY: tt5 | QWERTZ: tt5 | AZERTY: tt5
Phrase 1: One in the break
Phrase 2: Two in the break
Phrase 3: Three in the break
Phrase 4: Four in the break
Phrase 5: Overhead break
Action: Declare Emergency
QWERTY: tt6 | QWERTZ: tt6 | AZERTY: tt6
Phrase 1: Tower Declaring an Emergency
Phrase 2: Tower request emergency landing

2-5
BMS VAC Installation Guide
CHANGE 0

Phrase 3: Tower request priority landing

Action: Abort
QWERTY: tt7 | QWERTZ: tt7 | AZERTY: tt7
Phrase 1: Tower going around
Phrase 2: Tower cancel approach
Phrase 3: Tower aborting approach
Action: Say Again
QWERTY: tt8 | QWERTZ: tt8 | AZERTY: tt8
Phrase 1: Tower repeat
Phrase 2: Tower say again
Phrase 3: Tower repeat last transmission
Action: Request Vectors for Visual Approach
QWERTY: ttt1 | QWERTZ: ttt1 | AZERTY: ttt1
Phrase 1: Approach request visual approach
Phrase 2: Approach request vectors for visual approach
Phrase 3: Request visual approach
Phrase 4: Request vectors for visual approach
Action: Request Vectors for Instrument Approach
QWERTY: ttt2 | QWERTZ: ttt2 | AZERTY: ttt2
Phrase 1: Approach request instrument approach
Phrase 2: Approach request I L S approach
Phrase 3: Approach request tacan approach
Phrase 4: Approach request vectors for instrument approach
Phrase 5: Approach request vectors for I L S approach
Phrase 6: Approach request vectors for tacan approach
Phrase 7: Request vectors for instrument approach
Phrase 8: Request vectors for I L S approach
Phrase 9: Request vectors for tacan approach
Action: Request Overhead Approach
QWERTY: ttt3 | QWERTZ: ttt3 | AZERTY: ttt3
Phrase 1: Approach request overhead break
Phrase 2: Approach request overhead approach
Phrase 3: Request overhead break
Phrase 4: Request overhead approach
Action: Request Unrestricted Approach
QWERTY: ttt4 | QWERTZ: ttt4 | AZERTY: ttt4
Phrase 1: Approach request free approach
Phrase 2: Approach request straight in approach
Phrase 3: Approach request own approach
Phrase 4: Approach request Unrestricted Approach
Phrase 5: Request free approach
Phrase 6: Request straight in approach
Phrase 7: Request own approach
Phrase 8: Request Unrestricted Approach
Action: Declare Emergency
QWERTY: ttt5 | QWERTZ: ttt5 | AZERTY: ttt5
Phrase 1: Approach declaring an emergency

2-6
BMS VAC Installation Guide
CHANGE 0

Phrase 2: Approach request emergency landing

Phrase 3: Approach request priority landing
Action: Abort
QWERTY: ttt6 | QWERTZ: ttt6 | AZERTY: ttt6
Phrase 1: Approach going around
Phrase 2: Approach cancel approach
Phrase 3: Approach aborting approach
Action: Traffic in Sight
QWERTY: ttt7 | QWERTZ: ttt7 | AZERTY: ttt7
Phrase 1: Approach traffic in sight
Phrase 2: Approach visual on traffic
Phrase 3: Traffic in sight
Phrase 4: Visual on traffic
Action: Say Again
QWERTY: ttt8 | QWERTZ: ttt8 | AZERTY: ttt8
Phrase 1: Approach repeat
Phrase 2: Approach say again
Phrase 3: Approach repeat last transmission
Action: Report Airborne
QWERTY: tttt1 | QWERTZ: tttt1 | AZERTY: tttt1
Phrase 1: Departure report airborne
Phrase 2: Departure airborne
Phrase 3: Reort airborne
Phrase 4: Airborne
Phrase 5: Airborne request departure
Action: Request QNH
QWERTY: ttttt1 | QWERTZ: ttttt1 | AZERTY: ttttt1
Phrase 1: Tower request QNH
Phrase 2: Request QNH
Action: Request QFE
QWERTY: ttttt2 | QWERTZ: ttttt2 | AZERTY: ttttt2
Phrase 1: Tower request QFE
Phrase 2: Request QFE
Action: Takeoff Runway
QWERTY: ttttt3 | QWERTZ: ttttt3 | AZERTY: ttttt3
Phrase 1: Tower takeoff runway
Phrase 2: Tower say takeoff runway
Phrase 3: Ground takeoff runway
Phrase 4: Ground say takeoff runway
Phrase 5: Request takeoff runway
Action: Landing Runway
QWERTY: ttttt4 | QWERTZ: ttttt4 | AZERTY: ttttt4
Phrase 1: Tower landing runway
Phrase 2: Tower say landing runway
Phrase 3: Ground landing runway
Phrase 4: Ground say landing runway
Phrase 5: Approach landing runway

2-7
BMS VAC Installation Guide
CHANGE 0

Phrase 6: Approach say landing runway

Phrase 7: Request landing runway
Action: Request Wind Check
QWERTY: ttttt5 | QWERTZ: ttttt5 | AZERTY: ttttt5
Phrase 1: Tower wind check
Phrase 2: Tower request wind
Phrase 3: Tower say wind
Phrase 4: Wind check
Phrase 5: Request wind
Phrase 6: Say wind
Action: Inbound "Mother"
QWERTY: tttttt1 | QWERTZ: tttttt1 | AZERTY: tttttt1
Phrase 1: Mother Inbound
Phrase 2: Carrier Inbound
Phrase 3: Inbound
Action: Report "See You"
QWERTY: tttttt2 | QWERTZ: tttttt2 | AZERTY: tttttt2
Phrase 1: Mother See You
Phrase 2: Carrier See You
Phrase 3: See you
Action: Report "Platform"
QWERTY: tttttt3 | QWERTZ: tttttt3 | AZERTY: tttttt3
Phrase 1: Mother Platform
Phrase 2: Carrier Platform
Phrase 3: Platform
Action: Call "the Ball"
QWERTY: tttttt4 | QWERTZ: tttttt4 | AZERTY: tttttt4
Phrase 1: Roger ball
Phrase 2: Call the Ball
Action: Report Overhead Break
QWERTY: tttttt5 | QWERTZ: tttttt5 | AZERTY: tttttt5
Phrase 1: Mother in the break
Phrase 2: Carrier in the break
Action: Abort
QWERTY: ttttt6 | QWERTZ: ttttt6 | AZERTY: ttttt6
Phrase 1: Mother Abort Approach
Phrase 2: Carrier Abort Approach
Phrase 3: Mother aborting
Phrase 4: Carrier aborting
Action: Request Picture
QWERTY: q1 | QWERTZ: q1 | AZERTY: a1
Phrase 1: Chalis request picture
Phrase 2: Chalis say picture
Phrase 3: Sentry request picture
Phrase 4: Sentry say picture
Phrase 5: Dragnet request picture
Phrase 6: Dragnet say picture

2-8
BMS VAC Installation Guide
CHANGE 0

Phrase 7: Magic request picture

Phrase 8: Magic say picture
Phrase 9: Request picture
Phrase 10: Say picture
Phrase 11: Picture
Action: Declare
QWERTY: q2 | QWERTZ: q2 | AZERTY: a2
Phrase 1: Chalis declare
Phrase 2: Sentry declare
Phrase 3: Dragnet declare
Phrase 4: Magic declare
Phrase 5: Declare
Action: Request Help
QWERTY: q3 | QWERTZ: q3 | AZERTY: a3
Phrase 1: Chalis need help
Phrase 2: Chalis request help
Phrase 3: Sentry need help
Phrase 4: Sentry request help
Phrase 5: Dragnet need help
Phrase 6: Dragnet request help
Phrase 7: Magic need help
Phrase 8: Magic request help
Phrase 9: Need help
Phrase 10: Request help
Action: Wilco
QWERTY: q4 | QWERTZ: q4 | AZERTY: a4
Phrase 1: Chalis wilco
Phrase 2: Sentry wilco
Phrase 3: Dragnet wilco
Phrase 4: Magic wilco
Phrase 5: Wilco
Action: Unable
QWERTY: q5 | QWERTZ: q5 | AZERTY: a5
Phrase 1: Chalis unable
Phrase 2: Sentry unable
Phrase 3: Dragnet unable
Phrase 4: Magic unable
Phrase 5: Unable
Action: Check-In
QWERTY: q6 | QWERTZ: q6 | AZERTY: a6
Phrase 1: Chalis checking in
Phrase 2: Sentry checking in
Phrase 3: Dragnet checking in
Phrase 4: Magic checking in
Phrase 5: Checking in
Action: Check-Out
QWERTY: q7 | QWERTZ: q7 | AZERTY: a7

2-9
BMS VAC Installation Guide
CHANGE 0

Phrase 1: Chalis checking out

Phrase 2: Sentry checking out
Phrase 3: Dragnet checking out
Phrase 4: Magic checking out
Phrase 5: Checking out
Action: Request Relief
QWERTY: q8 | QWERTZ: q8 | AZERTY: a8
Phrase 1: Chalis request relief
Phrase 2: Chalis end of slot
Phrase 3: Sentry request relief
Phrase 4: Sentry end of slot
Phrase 5: Dragnet request relief
Phrase 6: Dragnet end of slot
Phrase 7: Magic request relief
Phrase 8: Magic end of slot
Phrase 9: Request relief
Phrase 10: End of slot
Action: Request Rescue Chopper
QWERTY: q9 | QWERTZ: q9 | AZERTY: a9
Phrase 1: Mayday Mayday Mayday
Phrase 2: Chalis request rescue chopper
Phrase 3: Chalis send rescue chopper
Phrase 4: Sentry request rescue chopper
Phrase 5: Sentry send rescue chopper
Phrase 6: Dragnet request rescue chopper
Phrase 7: Dragnet send rescue chopper
Phrase 8: Magic request rescue chopper
Phrase 9: Magic send rescue chopper
Phrase 10: Request rescue chopper
Phrase 11: Send rescue chopper
Action: Vector to Nearest Air Threat
QWERTY: qq1 | QWERTZ: qq1 | AZERTY: aa1
Phrase 1: Chalis vector to threat
Phrase 2: Chalis vector to nearest threat
Phrase 3: Chalis bogey dope
Phrase 4: Sentry vector to threat
Phrase 5: Sentry vector to nearest threat
Phrase 6: Sentry bogey dope
Phrase 7: Dragnet vector to threat
Phrase 8: Dragnet vector to nearest threat
Phrase 9: Dragnet bogey dope
Phrase 10: Magic vector to threat
Phrase 11: Magic vector to nearest threat
Phrase 12: Magic bogey dope
Phrase 13: Vector to threat
Phrase 14: Vector to nearest threat
Phrase 15: Bogey dope

2-10
BMS VAC Installation Guide
CHANGE 0

Action: Vector to Target

QWERTY: qq2 | QWERTZ: qq2 | AZERTY: aa2
Phrase 1: Chalis vector to target
Phrase 2: Chalis request vector to target
Phrase 3: Sentry vector to target
Phrase 4: Sentry request vector to target
Phrase 5: Dragnet vector to target
Phrase 6: Dragnet request vector to target
Phrase 7: Magic vector to target
Phrase 8: Magic request vector to target
Phrase 9: Vector to target
Phrase 10: Request vector to target
Action: Vector to Package
QWERTY: qq3 | QWERTZ: qq3 | AZERTY: aa3
Phrase 1: Chalis vector to package
Phrase 2: Chalis request vector to package
Phrase 3: Sentry vector to package
Phrase 4: Sentry request vector to package
Phrase 5: Dragnet vector to package
Phrase 6: Dragnet request vector to package
Phrase 7: Magic vector to package
Phrase 8: Magic request vector to package
Phrase 9: Vector to package
Phrase 10: Request vector to package
Action: Vector to Tanker
QWERTY: qq4 | QWERTZ: qq4 | AZERTY: aa4
Phrase 1: Chalis vector to tanker
Phrase 2: Chalis request vector to tanker
Phrase 3: Sentry vector to tanker
Phrase 4: Sentry request vector to tanker
Phrase 5: Dragnet vector to tanker
Phrase 6: Dragnet request vector to tanker
Phrase 7: Magic vector to tanker
Phrase 8: Magic request vector to tanker
Phrase 9: Vector to tanker
Phrase 10: Request vector to tanker
Action: Vector to Divert Field
QWERTY: qq5 | QWERTZ: qq5 | AZERTY: aa5
Phrase 1: Chalis request vector to divert field
Phrase 2: Chalis request vector to alternate
Phrase 3: Sentry request vector to divert field
Phrase 4: Sentry request vector to alternate
Phrase 5: Dragnet request vector to divert field
Phrase 6: Dragnet request vector to alternate
Phrase 7: Magic request vector to divert field
Phrase 8: Magic request vector to alternate
Phrase 9: Request vector to divert field

2-11
BMS VAC Installation Guide
CHANGE 0

Phrase 10: Request vector to alternate

Action: Vector to Home Plate
QWERTY: qq6 | QWERTZ: qq6 | AZERTY: aa6
Phrase 1: Chalis request vector to home plate
Phrase 2: Sentry request vector to home plate
Phrase 3: Dragnet request vector to home plate
Phrase 4: Magic request vector to home plate
Phrase 5: Request vector to home plate
Action: Vector to Carrier Group
QWERTY: qq7 | QWERTZ: qq7 | AZERTY: aa7
Phrase 1: Chalis request vector to carrier
Phrase 2: Sentry request vector to carrier
Phrase 3: Dragnet request vector to carrier
Phrase 4: Magic request vector to carrier
Phrase 5: Request vector to carrier
Action: Element Attack My Target
QWERTY: e1 | QWERTZ: e1 | AZERTY: e1
Phrase 1: Element attack my target
Phrase 2: Three attack my target
Action: Element Buddy Spike
QWERTY: e2 | QWERTZ: e2 | AZERTY: e2
Phrase 1: Element buddy spike
Phrase 2: Three buddy spike
Action: Element Raygun
QWERTY: e3 | QWERTZ: e3 | AZERTY: e3
Phrase 1: Element raygun
Phrase 2: Three raygun
Action: Element Weapons Free
QWERTY: e4 | QWERTZ: e4 | AZERTY: e4
Phrase 1: Element weapons free
Phrase 2: Three weapons free
Action: Element Weapons Hold
QWERTY: e5 | QWERTZ: e5 | AZERTY: e5
Phrase 1: Element weapons hold
Phrase 2: Element weapons safe
Phrase 3: Three weapons hold
Phrase 4: Three weapons safe
Action: Element Check Your Six
QWERTY: e6 | QWERTZ: e6 | AZERTY: e6
Phrase 1: Element check your six
Phrase 2: Element check six
Phrase 3: Three check your six
Phrase 4: Three check six
Action: Element Clear My Six
QWERTY: e7 | QWERTZ: e7 | AZERTY: e7
Phrase 1: Element clear my six
Phrase 2: Three clear my six

2-12
BMS VAC Installation Guide
CHANGE 0

Action: Element Attack Targets

QWERTY: e8 | QWERTZ: e8 | AZERTY: e8
Phrase 1: Element attack targets
Phrase 2: Element action
Phrase 3: Three attack targets
Phrase 4: Three action
Action: Element Rejoin
QWERTY: ee1 | QWERTZ: ee1 | AZERTY: ee1
Phrase 1: Element rejoin
Phrase 2: Element rejoin formation
Phrase 3: Element reform
Phrase 4: Element get back in formation
Phrase 5: Three rejoin
Phrase 6: Three rejoin formation
Phrase 7: Three reform
Phrase 8: Three get back in formation
Action: Element Drop Stores
QWERTY: ee2 | QWERTZ: ee2 | AZERTY: ee2
Phrase 1: Element drop stores
Phrase 2: Three drop stores
Action: Element Datalink Ground Target
QWERTY: ee3 | QWERTZ: ee3 | AZERTY: ee3
Phrase 1: Element datalink ground target
Phrase 2: Element dolly ground
Phrase 3: Three datalink ground target
Phrase 4: Three dolly ground
Action: Element Offensive Pursuit
QWERTY: eee1 | QWERTZ: eee1 | AZERTY: eee1
Phrase 1: Element offensive pursuit
Phrase 2: Three offensive pursuit
Action: Element Offensive Split
QWERTY: eee2 | QWERTZ: eee2 | AZERTY: eee2
Phrase 1: Element offensive split
Phrase 2: Three offensive split
Action: Element Beam Deploy
QWERTY: eee3 | QWERTZ: eee3 | AZERTY: eee3
Phrase 1: Element beam deploy
Phrase 2: Three beam deploy
Action: Element Grinder
QWERTY: eee4 | QWERTZ: eee4 | AZERTY: eee4
Phrase 1: Element grinder
Phrase 2: Three grinder
Action: Element Wide Azimuth
QWERTY: eee5 | QWERTZ: eee5 | AZERTY: eee5
Phrase 1: Element wide azimuth
Phrase 2: Three wide azimuth
Action: Element Short Azimuth

2-13
BMS VAC Installation Guide
CHANGE 0

QWERTY: eee6 | QWERTZ: eee6 | AZERTY: eee6

Phrase 1: Element short azimuth
Phrase 2: Three short azimuth
Action: Element Sweep
QWERTY: eee7 | QWERTZ: eee7 | AZERTY: eee7
Phrase 1: Element sweep
Phrase 2: Three sweep
Action: Element Defensive
QWERTY: eee8 | QWERTZ: eee8 | AZERTY: eee8
Phrase 1: Element defensive
Phrase 2: Three defensive
Action: Element Resume Mission
QWERTY: eeee1 | QWERTZ: eeee1 | AZERTY: eeee1
Phrase 1: Element resume mission
Phrase 2: Three resume mission
Action: Element Return to Base
QWERTY: eeee2 | QWERTZ: eeee2 | AZERTY: eeee2
Phrase 1: Element return to base
Phrase 2: Element R T B
Phrase 3: Three return to base
Phrase 4: Three R T B
Action: Element Snooze Radar
QWERTY: eeee3 | QWERTZ: eeee3 | AZERTY: eeee3
Phrase 1: Element snooze radar
Phrase 2: Element radar off
Phrase 3: Element radar to standby
Phrase 4: Element strangle gadget
Phrase 5: Three snooze radar
Phrase 6: Three radar off
Phrase 7: Three radar to standby
Phrase 8: Three strangle gadget
Action: Element Activate Radar
QWERTY: eeee4 | QWERTZ: eeee4 | AZERTY: eeee4
Phrase 1: Element activate radar
Phrase 2: Element radar on
Phrase 3: Three activate radar
Phrase 4: Three radar on
Action: Element Say Position
QWERTY: eeee5 | QWERTZ: eeee5 | AZERTY: eeee5
Phrase 1: Element say position
Phrase 2: Element say posit
Phrase 3: Three say position
Phrase 4: Three say posit
Action: Element Say Damage Report
QWERTY: eeee6 | QWERTZ: eeee6 | AZERTY: eeee6
Phrase 1: Element say damage
Phrase 2: Element damage report

2-14
BMS VAC Installation Guide
CHANGE 0

Phrase 3: Three say damage

Phrase 4: Three damage report
Action: Element Say Status
QWERTY: eeee7 | QWERTZ: eeee7 | AZERTY: eeee7
Phrase 1: Element say status
Phrase 2: Element what luck
Phrase 3: Three say status
Phrase 4: Three what luck
Action: Element Say Fuel State
QWERTY: eeee8 | QWERTZ: eeee8 | AZERTY: eeee8
Phrase 1: Element say fuel
Phrase 2: Element say fuel state
Phrase 3: Three say fuel
Phrase 4: Three say fuel state
Action: Element Say Weapons State
QWERTY: eeee9 | QWERTZ: eeee9 | AZERTY: eeee9
Phrase 1: Element say weapons
Phrase 2: Element say weapon state
Phrase 3: Three say weapons
Phrase 4: Three say weapon state
Action: Element Close Up
QWERTY: eeeee1 | QWERTZ: eeeee1 | AZERTY: eeeee1
Phrase 1: Element close up
Phrase 2: Element close up formation
Phrase 3: Three close up
Phrase 4: Three close up formation
Action: Element Switch Side
QWERTY: eeeee2 | QWERTZ: eeeee2 | AZERTY: eeeee2
Phrase 1: Element switch side
Phrase 2: Three switch side
Action: Element Break Right
QWERTY: eeeee3 | QWERTZ: eeeee3 | AZERTY: eeeee3
Phrase 1: Element break right
Phrase 2: Three break right
Action: Element Break Left
QWERTY: eeeee4 | QWERTZ: eeeee4 | AZERTY: eeeee4
Phrase 1: Element break left
Phrase 2: Three break left
Action: Element Go Higher
QWERTY: eeeee5 | QWERTZ: eeeee5 | AZERTY: eeeee5
Phrase 1: Element go higher
Phrase 2: Element stack high
Phrase 3: Three go higher
Phrase 4: Three stack high
Action: Element Go Lower
QWERTY: eeeee6 | QWERTZ: eeeee6 | AZERTY: eeeee6
Phrase 1: Element go lower

2-15
BMS VAC Installation Guide
CHANGE 0

Phrase 2: Element stack low

Phrase 3: Three go lower
Phrase 4: Three stack low
Action: Element Flex
QWERTY: eeeee7 | QWERTZ: eeeee7 | AZERTY: eeeee7
Phrase 1: Element flex
Phrase 2: Three flex
Action: Element Kickout
QWERTY: eeeee8 | QWERTZ: eeeee8 | AZERTY: eeeee8
Phrase 1: Element kickout
Phrase 2: Three kickout
Action: Element Go Wedge
QWERTY: eeeeee1 | QWERTZ: eeeeee1 | AZERTY: eeeeee1
Phrase 1: Element go wedge
Phrase 2: Three go wedge
Action: Element Go Trail
QWERTY: eeeeee2 | QWERTZ: eeeeee2 | AZERTY: eeeeee2
Phrase 1: Element go trail
Phrase 2: Three go trail
Action: Element Go Ladder
QWERTY: eeeeee3 | QWERTZ: eeeeee3 | AZERTY: eeeeee3
Phrase 1: Element go ladder
Phrase 2: Three go ladder
Action: Element Go Stack
QWERTY: eeeeee4 | QWERTZ: eeeeee4 | AZERTY: eeeeee4
Phrase 1: Element go stack
Phrase 2: Three go stack
Action: Element Go Fluid
QWERTY: eeeeee5 | QWERTZ: eeeeee5 | AZERTY: eeeeee5
Phrase 1: Element go fluid
Phrase 2: Three go fluid
Action: Element Go Spread
QWERTY: eeeeee6 | QWERTZ: eeeeee6 | AZERTY: eeeeee6
Phrase 1: Element go spread
Phrase 2: Three go spread
Action: Element Go Arrowhead
QWERTY: eeeeee7 | QWERTZ: eeeeee7 | AZERTY: eeeeee7
Phrase 1: Element go arrowhead
Phrase 2: Three go arrowhead
Action: Element Fence In
QWERTY: eeeeeee1 | QWERTZ: eeeeeee1 | AZERTY:
eeeeeee1
Phrase 1: Element fence in
Phrase 2: Three fence in
Action: Element Fence Out
QWERTY: eeeeeee2 | QWERTZ: eeeeeee2 | AZERTY:
eeeeeee2
Phrase 1: Element fence out

2-16
BMS VAC Installation Guide
CHANGE 0

Phrase 2: Three fence out

Action: Element Music On
QWERTY: eeeeeee3 | QWERTZ: eeeeeee3 | AZERTY:
eeeeeee3
Phrase 1: Element music on
Phrase 2: Element E C M on
Phrase 3: Three music off
Phrase 4: Three E C M off
Action: Element Music Off
QWERTY: eeeeeee4 | QWERTZ: eeeeeee4 | AZERTY:
eeeeeee4
Phrase 1: Element music off
Phrase 2: Element E C M off
Phrase 3: Three music off
Phrase 4: Three E C M off
Action: Element Turn Smoke On
QWERTY: eeeeeee5 | QWERTZ: eeeeeee5 | AZERTY:
eeeeeee5
Phrase 1: Element smoke on
Phrase 2: Three smoke on
Action: Element Turn Smoke Off
QWERTY: eeeeeee6 | QWERTZ: eeeeeee6 | AZERTY:
eeeeeee6
Phrase 1: Element smoke off
Phrase 2: Three smoke off
Action: Flight Attack My Target
QWERTY: r1 | QWERTZ: r1 | AZERTY: r1
Phrase 1: Flight attack my target
Action: Flight Buddy Spike
QWERTY: r2 | QWERTZ: r2 | AZERTY: r2
Phrase 1: Flight buddy spike
Action: Flight Raygun
QWERTY: r3 | QWERTZ: r3 | AZERTY: r3
Phrase 1: Flight raygun
Action: Flight Weapons Free
QWERTY: r4 | QWERTZ: r4 | AZERTY: r4
Phrase 1: Flight weapons free
Action: Flight Weapons Hold
QWERTY: r5 | QWERTZ: r5 | AZERTY: r5
Phrase 1: Flight weapons hold
Phrase 2: Flight weapons safe
Action: Flight Check Your Six
QWERTY: r6 | QWERTZ: r6 | AZERTY: r6
Phrase 1: Flight check your six
Phrase 2: Flight check six
Action: Flight Clear My Six
QWERTY: r7 | QWERTZ: r7 | AZERTY: r7
Phrase 1: Flight clear my six

2-17
BMS VAC Installation Guide
CHANGE 0

Action: Flight Attack Targets

QWERTY: r8 | QWERTZ: r8 | AZERTY: r8
Phrase 1: Flight attack targets
Phrase 2: Flight action
Action: Flight Rejoin
QWERTY: rr1 | QWERTZ: rr1 | AZERTY: rr1
Phrase 1: Flight rejoin
Phrase 2: Flight rejoin formation
Phrase 3: Flight reform
Phrase 4: Flight get back in formation
Action: Flight Drop Stores
QWERTY: rr2 | QWERTZ: rr2 | AZERTY: rr2
Phrase 1: Flight drop stores
Action: Flight Datalink Ground Target
QWERTY: rr3 | QWERTZ: rr3 | AZERTY: rr3
Phrase 1: Flight datalink ground target
Phrase 2: Flight dolly ground
Action: Flight Resume Mission
QWERTY: rrr1 | QWERTZ: rrr1 | AZERTY: rrr1
Phrase 1: Flight resume mission
Action: Flight Return to Base
QWERTY: rrr2 | QWERTZ: rrr2 | AZERTY: rrr2
Phrase 1: Flight return to base
Phrase 2: Flight R T B
Action: Flight Snooze Radar
QWERTY: rrr3 | QWERTZ: rrr3 | AZERTY: rrr3
Phrase 1: Flight snooze radar
Phrase 2: Flight radar off
Phrase 3: Flight radar to standby
Phrase 4: Flight strangle gadget
Action: Flight Activate Radar
QWERTY: rrr4 | QWERTZ: rrr4 | AZERTY: rrr4
Phrase 1: Flight activate radar
Phrase 2: Flight radar on
Action: Flight Say Position
QWERTY: rrr5 | QWERTZ: rrr5 | AZERTY: rrr5
Phrase 1: Flight say position
Phrase 2: Flight say posit
Action: Flight Say Damage Report
QWERTY: rrr6 | QWERTZ: rrr6 | AZERTY: rrr6
Phrase 1: Flight say damage
Phrase 2: Flight damage report
Action: Flight Say Status
QWERTY: rrr7 | QWERTZ: rrr7 | AZERTY: rrr7
Phrase 1: Flight say status
Phrase 2: Flight what luck
Action: Flight Say Fuel State

2-18
BMS VAC Installation Guide
CHANGE 0

QWERTY: rrr8 | QWERTZ: rrr8 | AZERTY: rrr8

Phrase 1: Flight say fuel
Phrase 2: Flight say fuel state
Action: Flight Say Weapons State
QWERTY: rrr9 | QWERTZ: rrr9 | AZERTY: rrr9
Phrase 1: Flight say weapons
Phrase 2: Flight say weapon state
Action: Flight Close Up
QWERTY: rrrr1 | QWERTZ: rrrr1 | AZERTY: rrrr1
Phrase 1: Flight close up
Phrase 2: Flight close up formation
Action: Flight Switch Side
QWERTY: rrrr2 | QWERTZ: rrrr2 | AZERTY: rrrr2
Phrase 1: Flight switch side
Action: Flight Break Right
QWERTY: rrrr3 | QWERTZ: rrrr3 | AZERTY: rrrr3
Phrase 1: Flight break right
Action: Flight Break Left
QWERTY: rrrr4 | QWERTZ: rrrr4 | AZERTY: rrrr4
Phrase 1: Flight break left
Action: Flight Go Higher
QWERTY: rrrr5 | QWERTZ: rrrr5 | AZERTY: rrrr5
Phrase 1: Flight go higher
Phrase 2: Flight stack high
Action: Flight Go Lower
QWERTY: rrrr6 | QWERTZ: rrrr6 | AZERTY: rrrr6
Phrase 1: Flight go lower
Phrase 2: Flight stack low
Action: Flight Flex
QWERTY: rrrr7 | QWERTZ: rrrr7 | AZERTY: rrrr7
Phrase 1: Flight flex
Action: Flight Kickout
QWERTY: rrrr8 | QWERTZ: rrrr8 | AZERTY: rrrr8
Phrase 1: Flight kickout
Action: Flight Go Wedge
QWERTY: rrrrr1 | QWERTZ: rrrrr1 | AZERTY: rrrrr1
Phrase 1: Flight go wedge
Action: Flight Go Trail
QWERTY: rrrrr2 | QWERTZ: rrrrr2 | AZERTY: rrrrr2
Phrase 1: Flight go trail
Action: Flight Go Ladder
QWERTY: rrrrr3 | QWERTZ: rrrrr3 | AZERTY: rrrrr3
Phrase 1: Flight go ladder
Action: Flight Go Stack
QWERTY: rrrrr4 | QWERTZ: rrrrr4 | AZERTY: rrrrr4
Phrase 1: Flight go stack
Action: Flight Go Fluid

2-19
BMS VAC Installation Guide
CHANGE 0

QWERTY: rrrrr5 | QWERTZ: rrrrr5 | AZERTY: rrrrr5

Phrase 1: Flight go fluid
Action: Flight Go Spread
QWERTY: rrrrr6 | QWERTZ: rrrrr6 | AZERTY: rrrrr6
Phrase 1: Flight go spread
Action: Flight Go Arrowhead
QWERTY: rrrrr7 | QWERTZ: rrrrr7 | AZERTY: rrrrr7
Phrase 1: Flight go arrowhead
Action: Flight Go Box
QWERTY: rrrrr8 | QWERTZ: rrrrr8 | AZERTY: rrrrr8
Phrase 1: Flight go box
Action: Flight Go Res Cell
QWERTY: rrrrr9 | QWERTZ: rrrrr9 | AZERTY: rrrrr9
Phrase 1: Flight go res cell
Action: Flight Go Vic
QWERTY: rrrrrr1 | QWERTZ: rrrrrr1 | AZERTY: rrrrrr1
Phrase 1: Flight go vic
Action: Flight Go Line Abreast
QWERTY: rrrrrr2 | QWERTZ: rrrrrr2 | AZERTY: rrrrrr2
Phrase 1: Flight go line abreast
Action: Flight Go Finger Four
QWERTY: rrrrrr3 | QWERTZ: rrrrrr3 | AZERTY: rrrrrr3
Phrase 1: Flight go finger four
Action: Flight Go Echelon Left
QWERTY: rrrrrr4 | QWERTZ: rrrrrr4 | AZERTY: rrrrrr4
Phrase 1: Flight go echelon left
Action: Flight Go Echelon Right
QWERTY: rrrrrr5 | QWERTZ: rrrrrr5 | AZERTY: rrrrrr5
Phrase 1: Flight go echelon right
Action: Flight Go Diamond
QWERTY: rrrrrr6 | QWERTZ: rrrrrr6 | AZERTY: rrrrrr6
Phrase 1: Flight go diamond
Action: Flight Fence In
QWERTY: rrrrrrr1 | QWERTZ: rrrrrrr1 | AZERTY: rrrrrrr1
Phrase 1: Flight fence in
Action: Flight Fence Out
QWERTY: rrrrrrr2 | QWERTZ: rrrrrrr2 | AZERTY: rrrrrrr2
Phrase 1: Flight fence out
Action: Flight Music On
QWERTY: rrrrrrr3 | QWERTZ: rrrrrrr3 | AZERTY: rrrrrrr3
Phrase 1: Flight E C M on
Phrase 2: Flight music on
Action: Flight Music Off
QWERTY: rrrrrrr4 | QWERTZ: rrrrrrr4 | AZERTY: rrrrrrr4
Phrase 1: Flight E C M off
Phrase 2: Flight music off
Action: Flight Turn Smoke On

2-20
BMS VAC Installation Guide
CHANGE 0

QWERTY: rrrrrrr5 | QWERTZ: rrrrrrr5 | AZERTY: rrrrrrr5

Phrase 1: Flight smoke on
Action: Flight Turn Smoke Off
QWERTY: rrrrrrr6 | QWERTZ: rrrrrrr6 | AZERTY: rrrrrrr6
Phrase 1: Flight smoke off
Action: Flight Single-Ship
QWERTY: rrrrrrrr1 | QWERTZ: rrrrrrrr1 | AZERTY: rrrrrrrr1
Phrase 1: Flight Rolling Takeoff
Phrase 2: Flight Singleship Takeoff
Action: Flight Element
QWERTY: rrrrrrrr2 | QWERTZ: rrrrrrrr2 | AZERTY: rrrrrrrr2
Phrase 1: Flight lineup section
Phrase 2: Flight lineup element
Phrase 3: Flight lineup 2 ship
Action: Flight Echelon
QWERTY: rrrrrrrr3 | QWERTZ: rrrrrrrr3 | AZERTY: rrrrrrrr3
Phrase 1: Flight lineup echelon
Action: Flight Four-Ship Three In
QWERTY: rrrrrrrr4 | QWERTZ: rrrrrrrr4 | AZERTY: rrrrrrrr4
Phrase 1: Flight lineup four ship three in
Phrase 2: Flight lineup four ship number three in the slot
Action: Flight Four-Ship Four In
QWERTY: rrrrrrrr5 | QWERTZ: rrrrrrrr5 | AZERTY: rrrrrrrr5
Phrase 1: Flight lineup four ship four in
Phrase 2: Flight lineup four ship number four in the slot
Action: Request Air Refuelling
QWERTY: y1 | QWERTZ: z1 | AZERTY: y1
Phrase 1: Texaco request refuel
Phrase 2: Texaco need fuel
Phrase 3: Texaco need to refuel
Phrase 4: Copper request refuel
Phrase 5: Copper need fuel
Phrase 6: Copper need to refuel
Phrase 7: Request refuel
Phrase 8: Need fuel
Phrase 9: Need to refuel
Action: Back In Pre-contact Position
QWERTY: y2 | QWERTZ: z2 | AZERTY: y2
Phrase 1: Texaco ready to take fuel
Phrase 2: Texaco Back In Precontact Position
Phrase 3: Copper ready to take fuel
Phrase 4: Copper Back In Precontact Position
Phrase 5: Ready to take fuel
Phrase 6: Back In Precontact Position
Action: Done Refueling
QWERTY: y3 | QWERTZ: z3 | AZERTY: y3
Phrase 1: Texaco done refuelling

2-21
BMS VAC Installation Guide
CHANGE 0

Phrase 2: Texaco ready to go

Phrase 3: Copper done refuelling
Phrase 4: Copper ready to go
Phrase 5: Done refuelling
Phrase 6: Ready to go
Action: Wingman Attack My Target
QWERTY: w1 | QWERTZ: w1 | AZERTY: z1
Phrase 1: Two attack my target
Phrase 2: Four attack my target
Action: Wingman Buddy Spike
QWERTY: w2 | QWERTZ: w2 | AZERTY: z2
Phrase 1: Two buddy spike
Phrase 2: Four buddy spike
Action: Wingman Raygun
QWERTY: w3 | QWERTZ: w3 | AZERTY: z3
Phrase 1: Two raygun
Phrase 2: Four raygun
Action: Wingman Weapons Free
QWERTY: w4 | QWERTZ: w4 | AZERTY: z4
Phrase 1: Two weapons free
Phrase 2: Four weapons free
Action: Wingman Weapons Hold
QWERTY: w5 | QWERTZ: w5 | AZERTY: z5
Phrase 1: Two weapons hold
Phrase 2: Two weapons safe
Phrase 3: Four weapons hold
Phrase 4: Four weapons safe
Action: Wingman Check Your Six
QWERTY: w6 | QWERTZ: w6 | AZERTY: z6
Phrase 1: Two check your six
Phrase 2: Two check six
Phrase 3: Four check your six
Phrase 4: Four check six
Action: Wingman Clear My Six
QWERTY: w7 | QWERTZ: w7 | AZERTY: z7
Phrase 1: Two clear my six
Phrase 2: Four clear my six
Action: Wingman Attack Targets
QWERTY: w8 | QWERTZ: w8 | AZERTY: z8
Phrase 1: Two attack targets
Phrase 2: Two action
Phrase 3: Four attack targets
Phrase 4: Four action
Action: Wingman Go Shooter
QWERTY: w9 | QWERTZ: w9 | AZERTY: z9
Phrase 1: Two go shooter
Phrase 2: Four go shooter

2-22
BMS VAC Installation Guide
CHANGE 0

Action: Wingman Go Cover

QWERTY: w0 | QWERTZ: w0 | AZERTY: z0
Phrase 1: Two go cover
Phrase 2: Four go cover
Action: Wingman Rejoin
QWERTY: ww1 | QWERTZ: ww1 | AZERTY: zz1
Phrase 1: Two rejoin
Phrase 2: Two rejoin formation
Phrase 3: Two reform
Phrase 4: Two get back in formation
Phrase 5: Four rejoin
Phrase 6: Four rejoin formation
Phrase 7: Four reform
Phrase 8: Four get back in formation
Action: Wingman Split Wing
QWERTY: ww2 | QWERTZ: ww2 | AZERTY: zz2
Phrase 1: Two split wing
Phrase 2: Four split wing
Action: Wingman Glue Wing
QWERTY: ww3 | QWERTZ: ww3 | AZERTY: zz3
Phrase 1: Two glue wing
Phrase 2: Four glue wing
Action: Wingman Drop Stores
QWERTY: ww4 | QWERTZ: ww4 | AZERTY: zz4
Phrase 1: Two drop stores
Phrase 2: Four drop stores
Action: Wingman Datalink Ground Target
QWERTY: ww5 | QWERTZ: ww5 | AZERTY: zz5
Phrase 1: Two datalink ground target
Phrase 2: Two dolly ground
Phrase 3: Four datalink ground target
Phrase 4: Four dolly ground
Action: Wingman Offensive Pursuit
QWERTY: www1 | QWERTZ: www1 | AZERTY: zzz1
Phrase 1: Two offensive pursuit
Phrase 2: Four offensive pursuit
Action: Wingman Offensive Split
QWERTY: www2 | QWERTZ: www2 | AZERTY: zzz2
Phrase 1: Two offensive split
Phrase 2: Four offensive split
Action: Wingman Beam Deploy
QWERTY: www3 | QWERTZ: www3 | AZERTY: zzz3
Phrase 1: Two beam deploy

2-23