Scribd
Upload
27 views3 pages

LCD

This document contains code for initializing and controlling a 16x2 LCD display module connected to a microcontroller. It includes functions for sending commands and data to the LCD, displaying text and numbers at given positions on the screen.

Uploaded by

ppat2006
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
27 views3 pages

LCD

This document contains code for initializing and controlling a 16x2 LCD display module connected to a microcontroller. It includes functions for sending commands and data to the LCD, displaying text and numbers at given positions on the screen.

Uploaded by

ppat2006
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

//NOTES:

//1: This code may be distributed and modified freely .


//2: External Crystal of 11.0592 MHz is assumed.
//3. 16x2 lcd Modules is being operated in Nibble Mode.
//4: Connections to the lcd are assumed as followed:

// RS -> P1.0
// RW -> P1.1
// E -> P1.2
// D4,D5,D6,D7 -> P1.4,P1.5,P1.6,P1.7

#define lcd_DATA P1

sbit lcd_rs = P1^0;

sbit lcd_rw = P1^1; //Must Always be low to allow data to be sent


to lcd

sbit lcd_en = P1^2;

void delay_ms(unsigned int n)


{
int i,j;
for(i=0;i<n;i++)
for(j=0;j<124;j++);
}

void lcd_enable()
{
lcd_en = 1; //High to low transition
delay_ms(2);
lcd_en = 0;
}

void lcd_cmd(unsigned char cmd)


{
lcd_rs = 0; //cmd Mode
lcd_DATA = ((cmd & 0xF0)|0x04);
lcd_enable();
lcd_DATA = (((cmd<<4) & 0xF0)|0x04);
lcd_enable();
delay_ms(1);
}

void lcd_data(unsigned char ascii)


{
lcd_rs = 1; //Data Mode
lcd_DATA = ((ascii & 0xF0)|0x05);
lcd_enable();
lcd_DATA = (((ascii<<4) & 0xF0)|0x05);
lcd_enable();
delay_ms(1);
}

void lcd_init()
{
P0=0x00;

lcd_cmd(0x02); //Enable 4 bit mode

lcd_cmd(0x28); //Set interface 4 bit 2 line

lcd_cmd(0x08); //Enable display/cursor

lcd_cmd(0x06); //Set cursor move, Move cursor right

lcd_cmd(0X0C); //Turn on display

void lcd_gotoxy(unsigned char row,unsigned char column) //move


cursor to the specified position
{
if(row==0)
{
lcd_cmd(0x80+column);
}
else if(row==1)
{
lcd_cmd(0xC0+column);
}
}
void lcd_number(int val,unsigned int field_length) // Function to
display number
{
char str[5]={0,0,0,0,0};
int i=4,j=0;
while(val)
{
str[i]=val%10;
val=val/10;
i--;
}
if(field_length==-1)
while(str[j]==0) j++;
else
j=5-field_length;

if(val<0) lcd_data('-');
for(i=j;i<5;i++)
{
lcd_data(48+str[i]);
}
}

void lcd_string(unsigned char *str)


{

while(*str!='\0') //Till null character is encountered


{
lcd_data(*str);
str++;
}
}
void lcd_stringxy(unsigned char row, unsigned char col, unsigned char *lcd_string)
{
lcd_gotoxy(row,col);
while (*lcd_string)
{
lcd_data(*lcd_string++);
}
}
void lcd_numberxy(unsigned char row, unsigned char col,int val,unsigned int
field_length)
{
char str[5]={0,0,0,0,0};
int i=4,j=0;

lcd_gotoxy(row,col);

while(val)
{
str[i]=val%10;
val=val/10;
i--;
}
if(field_length==-1)
while(str[j]==0) j++;
else
j=5-field_length;

if(val<0) lcd_data('-');
for(i=j;i<5;i++)
{
lcd_data(48+str[i]);
}
}

You might also like