DATA SHEET

Numerical control
for Press CybTouch 8P
CybTouch 8P is designed to control High speed RFlink wireless
conventional press brakes with 2 communication facilitates backup,
axes (Y - X). restore and data transfer functions
with laptop computers.
As part of the CybTouch numerical
controls’ family, CybTouch 8P was CybTouch 8P for press is available
designed with the OEM’s needs integrated into a sleek and modern
in mind. Offering a broad range of housing, or can optionally also be
machine functionalities in a very delivered as a robust panel.
accessible way, it can thus be
easily and precisely fine-tuned to
accurately match the needs of the
machine it controls.

Boasting a very user-friendly touch

screen interface, CybTouch 8P
is a sober, practical and sensible
numerical control that will make
any end user feel immediately at
ease.

Standard software specifications

User friendliness Screen content Configuration

Excellent readability thanks to the Can be simplified to its bare Axes configuration, inputs/outputs
large characters, big buttons and necessities by removing all unused and auxiliary functions can be
vivid colors. So intuitive that the functions, buttons or information. made to precisely fit the specific
user can be operational in no time. needs of the machine. The valves
Visit the Video section of our web- management function allows the
site and see for yourself. Pop-up NC to easily adapt to various types
messages for security or external Wizards of hydraulic sequences.
malfunctions.
Complete set of Wizards helping
to set up the back gauge axis and
the beam. Machine startup is made Memory capacity
EasyBend page very simple and straightforward.
Setup is more reliable and its „„ 50 Punches
Provides immediate easy use of duration is significantly reduced. „„ 50 Dies
the machine: a second operator
„„ 200 Programs
can briefly interrupt production
without changing the program „„ 24 Sequences per program
when an urgent bend is required. „„ 10 Materials

May
© Cybelec 2018 2018 1/6
V2.0
 Hardware specifications
Housing or panel version New indexing functions Original parameters

Delivered integrated into a sleek Wizard functions make the Internal backup in a special
and modern housing specially definition of indexes a lot simpler, safe memory allows the user to
designed to be attached to a quicker and more precise. restore at any time the original
swiveling arm, or optionally also parameters; machine is running
available as a robust panel version. again in an extremely short
Wireless communication time in the event of a memory
loss or involuntary parameter
Integration RFlink wireless radio frequency modification.
data communication (need
Reduced electrical wiring, electrical optional RFlink USB dongle) allows
cabinet size and equipment for backup, restoring and firmware Encoders
lower set-up costs on each press upgrades operations without any
brake. Can easily be integrated into cable connection to the numerical CybTouch 8P accepts encoders
the electrical box diagrams. Ideal control. with or without complementary
for upgrading machines without signals.
NC with minimal changes.
Energy

Energy saving thanks to the

integrated Eco mode function that
automatically stops the main pump
after a chosen time of inactivity.

Axis and bending functions

The following elements are available and can be configured on the CybTouch 8P by the OEM. However, some
functions depend on the machine construction.

Features availability depends on the number of available axes and inputs/outputs.

Back gauge axis & bending beam Bending features

„„ Wizards and auto-tuning of the „„ Automatic calculation of the „„ Back gauge clearance during the
axes (including for the bending bend depth, the bend pressure, bending process (yes / no).
beam). the back gauge positioning, the „„ Automatic back gauge
„„ High precision and fast posi- crowning, the angle correction correction according to the bend
tioning algorithm for frequency and the bend allowance. and flange length.
converter axes. „„ Pressure management. „„ Sequence repetition.
„„ Retraction of the back gauge „„ Crowning (pressure or „„ Part counter with auto-stop.
during the bending process can mechanical type). „„ Time and stroke counters for oil
be configured. „„ Program page at start up for service.
„„ Indexing in several modes. quick accessibility. „„ Pump start button.
„„ Inch / mm. „„ User friendly tool management.

May
2018 2/6 © Cybelec 2018
V2.0
Technical Characteristics

Screen 7” color graphic CRT screen, with LED backlight control.

Work memory SRAM

System memory 2 GB Micro SD Card with firmware update via RFlink.

Communication Cybelec RFlink (radio frequency link).

Axis • ± 10VDC management of AC/DC drives and motors.
• 0-10 VDC frequency converter for AC asynchronous motors.
• SP-SN-HS 2 speeds mode.
• SP-SN 0-10 VDC 2 adjustable speeds.
Units inch/mm conversion.
Power supplies • Numerical control: stabilized + 24VDC -15% / + 20% 15W
• Digital inputs/outputs: stabilized + 24VDC -15% / + 20%
Encoder inputs 2 5 VDC or 12 VDC* or 24 VDC* (* = external power supply).
Complementary signals are not necessary, but recommended.
Power supplies for encoders 5 VDC Supplied by CybTouch. Max. 250 mA for each encoder.

Digital inputs 8 Optocoupled.

Analog inputs 2 0-10 VDC.

Digital outputs 12 Optocoupled and short circuit proof.
24 VDC source mode, max. 3.0 A.
Possibility to configure twice the same output to double the current.
Analog outputs 3 ±10 VDC.
Impedance < 100 Ω, short circuit proof.
Load ≥ 2 kΩ (max 15 mA).
Reference voltage One of the above analog outputs is used for the 10VDC reference.
Operating conditions Min. 5° Celsius, max. 45° Celsius.
Relative humidity 10 to 85% non-condensing.
EC Directives IEC61131-2.
Available languages English, Français, Deutsch, Italiano, Nederlands, Español, Português,
Português Brasil, Český, Türkçe, 中文, 台灣, Polski, Pусский, Suomi

May
© Cybelec 2018 2018 3/6
V2.0
 Dimensions

Box version
254 161

22
37
315

55
66

210
Ø 23

Attachment dimensions
70
60

7xØ7 R4.5 A
R3.5

86 40 x 95
70
60
40

61

13
5°

B
40

80
95 60 x 60 or 65 x 65
80 x 80 x 80
Two adapters are provided.
Stick the appropriate one on
top of the box.

May
2018 4/6 © Cybelec 2018
V2.0
Panel version
254
min. 30 38

315

25,6

Integrating opening dimensions

TOP
200
231
236
36
0
5

297.5
292.5
262.5

10 x Ø 4
287.5

150

226
37.5
5
0
0
5
52.5

190
231
236

BOTTOM

May
© Cybelec 2018 2018 5/6
V2.0
 Options & Accessories

S-OPT-RFLINK RFlink USB key for PC including CybTouchTools software

S-MVP-100/A Pressure valve amplifier

Ordering Information

Fieldbus interface Available models

Number of axis Version
(Box or Panel) S-CBT-82PA12/BW
S-CBT-82PA12/P
S - C B T- 8 2PA12 / BW
Press type Color
(P) (White)
Number of outputs

All specifications are subject to modification without notice

CybTouch™, all rights reserved
May © Cybelec S.A. 2017
2018 6/6 Cybelec S.A. • Rue des Uttins 27 • CH-1401 Yverdon-les-Bains • Switzerland
V2.0 [email protected] • www.cybelec.ch
Tel. +41 24 447 02 00 • Fax +41 24 447 02 01