www.ecivalve.

it
Technical Valve Catalogue

Production of the
Best Quality
Range of Valves

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
1
BRONZE VALVES

BRASS VALVES

CAST-IRON VALVES
General Index
General Index 3
Bronze Valves 5
BR 118 6
BR 120 7
BR 220 8
BR 325 9
BR 432 10
BR 516 11
BR 520 12
BR 525 13
BR 582 14
BR 825 15
Valve Instalation Tips 16
Brass Valves 19
BS 135 20
BS 202 21
BS 302 22
BS 501 23
BS 502 24
BS 910 25
Cast-Iron Valves 27
G 101 28
G 103 29
G 201 30
G 203 31
G 301 32
G 303 33
G 311 34
G 401 35
G 403 36
G 501 37
G 503 38
G 505 39
G 507 40
G 801 41
Pressure Independent Control Valves (PICV) 43
BS 925 (PICV) 44
Valve Accessories 51
V1100/V120052
Certifications 53
Notes54

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
3
 European Casting Industry ECI is dedicated to manufacturing the best quality
of wide range valves. Our goal is to provide first class quality and standards to
our clients. ECI valves have a wide range of use in the heating, ventilating, and
air-conditioning systems, while also being applicable in the oil and gas fields. Each
of our products has been systematically tested and monitored to ensure that the
standards of quality are being met.

ECI produces the same valves with different standards, this allow better distri-
bution of valves to more areas around the world, particularly in the Middle East,
Europe and North America.

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.

4
Bronze Valves

BR 118 6
BR 120 7
BR 220 8
BR 325 9
BR 432 10
BR 516 11
BR 520 12
BR 525 13
BR 582 14
BR 825 15

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
5
BR 118
BRONZE BALL VALVE
WORKING PRESSURE PN 25 www.ecivalve.it
FULL BORE
TAPER PIPE THREADED TO ISO 7
DESIGN STANDARD GB/T8464

Specifications:

• WORKING PRESSURE: PN 25
• WORKING TEMPERATURE: T ≤ 170°C
• PORT SIZE: Materials
• ½” UP TO 2”
• FULL PORT No. DESCRIPTION BRONZE
• TESTING PRESSURE: 100 PSI AIR FOR SHELL & SEAT 1 Seat retainer Bronze CC491K
• TAPER PIPE THREADED TO NPT AND ISO 7-1 (EX. BS-21)
• SUITABLE MEDIA: WATER, OIL, AIR, & STEAM 2 Packing P.T.F.E

3 Seat P.T.F.E

4 Ball Brass CW617N

Dimensions (mm) 5 Body Bronze CC491K

6 Stem DZR Brass CW602N

DN SIZE INCH L H E Weight(KGS)
7 Stem P.T.F.E
15 ½” 53 44 44 0.228
8 Packing P.T.F.E
20 ¾” 61 51 51 0.366
9 Gland Nut Brass CW617N
25 1” 71 55 55 0.539
10 Lever Mild Steel Chrome Plated
32 1¼” 85 65 65 0.838
11 Lever PVC
40 1½” 92 70 70 1.133 12 Washer Stainless Steel

50 2” 114 83 83 1.880 13 Nut Stainless Steel

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
6
BR 120
BRONZE BALL VALVE
600 PSI / 41.4 BAR WOG www.ecivalve.it
150 PSI / 10.3 BAR WSP
½”~1” FULL PORT
1¼”~4” CONVENTIONAL PORT
Conforms to MSS SP-110

Specifications:

• WORKING PRESSURE:
600 PSI / 41.4 BAR WOG
150 PSI / 10.3 BAR WSP
• WORKING TEMPERATURE: T ≤ 140°C
• PORT SIZE:
½”~1” FULL PORT
1¼”~4” RED PORT (CONVENTIONAL)
• TESTING PRESSURE: 100 PSI AIR FOR SHELL & SEAT
• TAPER PIPE THREADED TO NPT AND ISO 7-1 (ex. BS-21)
• SUITABLE MEDIA: WATER, OIL, AIR & STEAM
Materials

No. DESCRIPTION BRONZE LEAD FREE

Dimensions (mm) 1 Body ASTM B584 C84400 ASTM C89844

2 Tailpiece ASTM B584 C84400 ASTM C89844

DN SIZE INCH L H E Weight(KGS)
ASTM B16 C36000
3 Ball Stainless Steel 316
15 ½” 61 48 102 0,399 or B124 C37700

20 ¾” 74 56 122 0,581 4 Stem ASTM B16 C36000 ASTM C46400

5 Packing Nut ASTM B16 C36000 ASTM B16 C36000

25 1” 86 65 122 0,889
6 Ball Seat 15% Glass RPTFE TEFLON PTFE
32 1¼” 102 69 122 1.406
7 Packing TEFLON PTFE TEFLON PTFE
40 1½” 109 79 175 2.177
8 Thrust Washer TEFLON PTFE TEFLON PTFE
50 2” 117 84 175 3.039
9 Handle Steel-Zn.P. Steel-Zn.P.
65 2½” 150 91 175 3.856 10 Handle Sleeve Vinyl Vinyl

80 3 180 114 201 6.713 11 Handle Nut Steel-Zn.P. Steel-Zn.P.

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
7
BR 220
BRONZE STRAINER
PN 20 “Y” TYPE www.ecivalve.it

Specifications:

• PRESSURE RATING: PN20

• SUITABLE MEDIA: WATER, OIL, AIR & GAS
• WORKING TEMPERATURE: T ≤ 170°C
• TAPER PIPE THREAD TO NPT AND ISO 7-1 (EX. BS-21)

Dimensions (mm)

DN SIZE INCH L H Weight(KGS)

15 ½” 58 33 0.185
Materials
20 ¾” 70 41 0.298
No. DESCRIPTION BRONZE
25 1” 88 49 0.426
1 Body Bronze CC491K
32 1¼” 96 56 0.720
2 Screen Stainless Steel Type 304
40 1½” 107 62 0.980 3 Gasket P.T.F.E

50 2” 126 80 1.500 4 Cap Bronze CC491K

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
8
BR 325
BRONZE CHECK VALVE
PN 25 SWING TYPE www.ecivalve.it
Conforms to MSS SP-80

Specifications:

• PRESSURE RATING: PN25

• SUITABLE MEDIA: WATER, OIL, AIR & STEAM
• WORKING TEMPERATURE: T ≤ 170°C
• TAPER PIPE THREAD TO NPT AND ISO 7-1 (EX. BS-21)

Dimensions (mm)

DN SIZE INCH L H Weight(KGS) Materials

10 ⅜” 48 33 0.301 No. DESCRIPTION MATERIAL

1 Body Bronze CC491K
15 ½” 58 38 0.332
2 Cap Bronze CC491K
20 ¾” 66 42 0.440
3 Disc Bronze CC491K (1.¼” - 2”)
25 1” 80 49 0.687
3 Disc Brass CW617N (⅜” - 1”)
32 1¼” 89 56 1.010
4 Hinge Bronze CC491K
40 1½” 95 65 1.423
5 Hinge Pin Stainless Steel
50 2” 108 76 2.390 6 Hinge Nut Brass CW617N

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
9
BR 432
BRONZE GLOBE VALVE
PN 32 www.ecivalve.it
Rising stem
Conforms to BS 5154/MSS SP-80

Materials
Specifications:
No. DESCRIPTION MATERIAL
• PRESSURE RATING: PN32 1 Body Bronze CC491K
• SUITABLE MEDIA: WATER, OIL, AIR & STEAM
2 Bonnet Bronze CC491K
• WORKING TEMPERATURE: T ≤ 180°C
• TAPER PIPE THREAD TO NPT AND ISO 7-1 (EX. BS-21) 3 Disc Stem Ring Brass CW602N

4 Disc P.T.F.E

5 Disc Holder Bronze CC491K

Dimensions (mm) 6 Disc Nut Brass CW602N

7 Washer Brass CW602N

DN SIZE INCH A B C Weight(KGS)
8 Stem Brass CW602N
15 ½” 62 101 52 0.540
9 Gland Brass CW614N
20 ¾” 74 115 52 0.650
10 Packing Asbestos Free
25 1” 90 125 70 0.810
11 Packing Nut Brass CW614N
32 1¼” 100 150 70 1.550
12 Handwheel Aluminum
40 1½” 115 159 92 2.010 13 Handwheel Nut Brass CW614N

50 2” 136 191 103 3.080 14 I.D Plate Aluminum

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
10
BR 516
BRONZE GATE VALVE
PN16 www.ecivalve.it
Non-Rising stem
Conforms to PED 97/23/CE & it is CE marking-free
as per art. 3 par.3

Specifications:

• PRESSURE RATING: PN16

• SUITABLE MEDIA: WATER, OIL & AIR
• WORKING TEMPERATURE: T ≤ 80°C
• TAPER PIPE THREAD TO NPT AND ISO 228/1

Dimensions (mm) Materials

DN SIZE INCH F L H D Weight(KGS) DESCRIPTION MATERIAL

Body Bronze SN 5 UNI-EN1982 DIN50930/6
15 ½” 15 38 68 45 0.195
Bonnet Brass CW 617 N-UNI-EN12165
20 ¾” 19 45 78 50 0.280
Stem Brass CW 614 N-UNI-EN12164
25 1” 24 48 92 55 0.380
Packing EPDM90 DUTRAL
32 1¼” 32 51 108 60 0.600
Wedge Brass DELTA CS UNI-EN1982 CB 7535
40 1½” 37 58 125 70 0.830 Handwheel Steel with blue plastic coating

50 2” 47 62 145 80 1.210 Handwheel Nut Steel Zinc plated

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
11
BR 520
BRONZE GATE VALVE
PN 20 www.ecivalve.it
Non-Rising stem
Conforms to BS 5154

Specifications:

• PRESSURE RATING: PN20

• SUITABLE MEDIA: WATER, OIL, AIR & STEAM
• WORKING TEMPERATURE: T ≤ 170°C
• TAPER PIPE THREAD TO NPT AND ISO 7-1 (EX. BS-21)
Materials

No. DESCRIPTION MATERIAL

Dimensions (mm) 1 Body Bronze CC491K

2 Bonnet Bronze CC491K

DN SIZE INCH F L H D Weight(KGS)
3 Stem DZR Brass CW602N
15 ½” 12.7 50 74 52 0.268
4 Packing Nut Brass CW617N
20 ¾” 19.1 54 85 52 0.395
5 Packing P.T.F.E
25 1” 25.4 62 106 70 0.585
6 Stem Bush DZR Brass CW602N
32 1¼” 31.8 70 113 70 0.857
7 Disc Bronze CC491K
40 1½” 38.2 77 132 92 1.265 8 Handwheel Aluminum

50 2” 50.9 87 155 92 1.900 9 Handwheel Nut Brass CW614N

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
12
BR 525
BRONZE GATE VALVE
PN 25 www.ecivalve.it
Non-Rising stem
Conforms to BS 5154/MSS SP-80

Specifications:

• PRESSURE RATING: PN25

• SUITABLE MEDIA: WATER, OIL, AIR & STEAM
• WORKING TEMPERATURE: T ≤ 170°C
• TAPER THREAD TO NPT AND ISO 7-1 (EX. BS-21)

Materials

No. DESCRIPTION MATERIAL

Dimensions (mm) 1 Body Bronze CC491K

DN SIZE INCH L H D Weight(KGS) 2 Bonnet Bronze CC491K

8 ¼” 46 75 45 0.284 3 Stem DZR Brass CW602N

10 ⅜” 46 75 45 0.268 4 Disc Bronze CC491K

5 Stuffing Box DZR Brass CW602N

15 ½” 51 82 52 0.341
6 Packing Ring P.T.F.E
20 ¾” 55 95 65 0.582
7 Gland Brass CW614N
25 1” 63 118 70 0.878
8 Packing Nut Brass CW614N
32 1¼” 71 144 79 1.360
9 Handwheel Aluminum
40 1½” 73 166 92 1.750 10 Identification Plate Aluminum

50 2” 83 190 103 2.810 11 Handwheel Nut Brass CW614N

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
13
BR 582
BRONZE GATE VALVE
PN 32 www.ecivalve.it
Rising stem
Conforms to BS 5154/MSS SP-80

Materials

No. DESCRIPTION MATERIAL

1 Body Bronze CC491K

2 Bonnet Bronze CC491K

3 Stem Bronze CC491K

4 Disc Bronze CC491K

5 Packing P.T.F.E

6 Clamping Ring Brass CW614N

7 Packing Nut Brass CW614N

8 Handwheel Aluminum

9 Id Plate Aluminum

10 Handwheel Nut Brass CW614N

Dimensions (mm)

DN SIZE INCH A B C Weight(KGS)

8 ¼” 46 126 45 0.320

10 ⅜” 46 126 45 0.310

15 ½” 51 129 52 0.400

20 ¾” 55 159 65 0.643

25 1” 63 189 70 0.998

32 1¼” 72 219 78 1.519 Specifications:

40 1½” 73 246 92 2.064
• PRESSURE RATING: PN32
50 2” 83 301 92 3.191
• SUITABLE MEDIA: WATER, OIL, AIR & STEAM
65 2½” 108 369 134 5.800 • WORKING TEMPERATURE: T ≤ 170°C
• TAPER PIPE THREAD TO NPT AND ISO 7-1 (EX. BS-21)
80 3” 117 416 134 8.520

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
14
BR 825
BRONZE FIXED ORIFICE
DOUBLE REGULATING VALVE (DRV) www.ecivalve.it
PN 25
Conforms to BS7350

Specifications:

• PRESSURE RATING: PN25

• SUITABLE MEDIUM: WATER
Materials
• WORKING TEMPERATURE: T ≤ 120°C
• TAPER PIPE THREAD TO ISO 7-1 (EX. BS-21) No. DESCRIPTION MATERIAL SIZES
• Y-PATTERN GLOBE VALVE WITH THROTLING DISC
• DRV WITH A FIXED ORIFICE DESIGN 1 Body Bronze CC491K All
• ACCURACY ± 5% ON ALL SETTINGS 2 Disc Face P.T.F.E 1”-2”
• DRV ALLOWS VALVE OPENING TO BE SET WITH ALLEN KEY.
• DRV HAS A MICROSET HAND WHEEL 2 Disc Face DZR Brass CW602N ½”-¾”
• FOR USE IN HVAC & PLUMBING SYSTEMS 3 Orifice Plate DZR Brass CW602N All
• TO BE USED FOR ISOLATING & TO BE RE-OPENED TO ITS
PRE-SET POSITION 4 Nut DZR Brass CW602N All
• SUPPLIED WITH TWO TEST POINTS 5 Disc DZR Brass CW602N All
• DESIGN AND MANUFACTURE CONFORM TO BS7350
6 Disc Retaining Ring DZR Brass CW602N All

7 O Ring N.B.R All

8 Bonnet DZR Brass CW602N ½”-1¼”

Dimensions (mm) & Coefficients
8 Bonnet Bronze CC491K 1½”-2”

DN SIZE INCH A B FLOW (KV) KVS Weight(KGS) 9 Stem DZR Brass CW602N All

10 Retainer Ring Stainless Steel 304 All

15 ½” 87 105 1.72 2.2 0.580
11 Sleeve Brass CW617N All
20 ¾” 96 106 2.97 4.6 0.650
12 Screw Brass CW614N All
25 1 100 127 4.75 8.5 0.890
13 Handwheel PA All
32 1¼” 114 128 10.25 16.7 1.110
14 Cap PA All
40 1½” 125 143 16.83 26.1 1.460 15 Screw Stainless Steel 304 All

50 2” 146 144 27.26 43.2 1.980 16 Test Points DZR Brass CW602N All

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
15
Valve Instalation Tips

Soldering and Silver Brazing

The most important thing is to consider is choosing the correct valve best suited for the applica-
tion needed. Soldering and silver brazing is the most common method to joining the Bronze valves
to tubes or fittings. Poor quality installation can lead to poor and damaged joints. This will lead to
leakage and the damaging of the valve.
Perform the following steps to ensure a proper installation:

1 Start by cutting the tube end square, use either a tube cutter or a hack saw. Ream, burr and
size the tube according to valve size.

2 Clean both ends of the cut tube, use a sand cloth or steel wire brush or even a nylon abrasive
pad. It is important to eliminate all oxides and any soil from the tube ends to ensure a clean flow
through the tubes.

3 Apply flux on the outside of the tube ends and the inside of the solder cups. It is best to use
a soldering flux that can dissolve and remove any remaining drops of oxide and surface soil from
the cleaned surfaces to be joined. It is important that the surface that will be joined to be comple-
tely covered in a thin layer of flux.

4 Make sure the valve is fully open. Start by applying heat to the tube ends first. Use the tube
then to transfer the heat to the valve ends.
When using the Silver Brazing Method assemble the part to be brazed. Assemble the tube with
the valve ends so that they are joined. It should be noted that the assembly should be firmly sup-
ported, and that there can be no change in alignment once the brazing operations starts. Apply
flame using a torch to the valve ends. Heat uniformly around the end, moving from valve end to the
tube end. Perform heating until noise from heating the flux is gone. For valves that are one-inch
and larger it is difficult to raise the temperature around the entire joint to the same temperature. It

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
16
is recommended to use a double tip torch to allow a uniform temperature around a larger area. A
desirable method is using an oxy-acetylene flame. Make sure that the flame is at least 1 inch away
from the valve end. Apply heat uniformly on to the valve. Make sure the flame does not remain on
any one point. Overheating the valve ends can lead to a damaged valve.

5 For the wire use a ½” solder for a ½” valve, increase wire size as the size of the valve increases.
Excess use of solder can go through the tube and clog the sealing area. A constant run of solder
or brazing alloy will be present when the joint is filled.
When using the Silver Brazing Method feed the brazing alloy into the joint between the tube and
the fitting. Add the brazing only when the metals are heated to brazing temperatures. The flame
can be moved away from the valve and tube end when the brazing alloy is applied. Move the flame
back and forth as the alloy is inserted into the joint. The brazing alloy will diffuse readily into space
between tube outer wall and valve socket. After the joint area is filled a continuous rim of brazing
alloy will be visible.

6 Any flux residue or excess solder should be brushed off. A fillet should be visible around the
valve end as it cools.

Silver Brazing Tips

Using different types of brazing materials does not affect how strong the brazing joint is. The
strength of the joint depends a lot on the procedure. If the brazing alloy is applied correctly on the
outside tube and the valve socket, then the joint will hold.

Threading Connection Tips

Any type of dirt, residue, or soil that go into the valve can highly damage parts of the valve and
hinder its effectiveness. When using a threaded pipe connection, clean the threaded area to re-
move any deposits from it. Use air or steam to thoroughly remove any residue. Applying steam or
air through the valve is also a good way to remove unwanted residue that can damage the valve.
Before installation, check line of flow through valve so that valve will function properly. Close
valve completely before installation. Apply wrench to hex next to pipe and guard against possible
distortion. After installation of valve, support line; a sagging pipe line can distort valve and cause
failure.

Flanged Connection Tips

There are several steps to follow to make sure that a flanged joint will be properly assembled.
First, clean the joint carefully. Then loosely assemble the joint by putting in the bottom two or three
bolts. Then carefully insert the gasket into place. The bottom bolts will help locate the gasket and
hold it in position. Then insert the rest of the bolts into place and tighten all of the bolts evenly—not
in rotation, but by the cross-over method to load the bolts evenly and eliminate concentrated stres-
ses. The bolts should be checked for tightness after an appropriate interval of use and retightened
if necessary.

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
17
Brass Valves

BS 135 20
BS 202 21
BS 302 22
BS 501 23
BS 502 24
BS 910 25

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
19
BS 135
BRONZE BALL VALVE
www.ecivalve.it

Specifications:
• FULL BORE SIZES 1/2” TO 2”
• STANDARD PASSAGE SIZES 2.1/2” UP TO 4”
• WP: 35 BAR SIZES 1/2” & 3/4” 28 BAR SIZES 1” UP TO 4”
• WORKING TEMPERATURE: T ≤ 140°C
• SUITABLE FOR WATER, GLYCOLATE SOLUTION (GLYCOL 50%)
NON DANGEROUS GAS
• THREADED ACCORDING TO ISO 228/1
• SHELL TEST ACCORDING TO UNI EN 13828

Dimensions (mm)

DN SIZE INCH L H1 L2 Weight(KGS) Materials

15 ½” 53 35 77 0.177 DESCRIPTION MATERIAL

20 ¾” 60 47 95 0.274 Body Brass chrome plated CW617N EN 12165

25 1” 74 51 95 0.407 Tailpiece Brass chrome plated CW614N EN 12164

Ball Brass chrome plated CW617N EN 12165

32 1¼” 84 56 95 0.565
Stem Brass chrome plated CW614N EN 12164
40 1½” 95 69 137 0.984
Ball Seat PTFE
50 2” 109 77 137 1.539
Packing PTFE
65 2½” 146 102 173 2.980
Handle Galvanized steel
80 3 160 109 173 4.172 Handle Sleeve Vinyl

100 4” 207 200 187 7.004 Handle Nut Galvanized steel

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
20
BS 202
BRASS STRAINER “Y” TYPE
According to PED 97/23/CE and it is CE www.ecivalve.it
marking-free as per art. 3 par. 3

Specifications:

• WORKING PRESSURE: PN16

• WORKING TEMPERATURE: 0°C +100°C
• THREADED ACCORDING TO ISO 228/1 FXF
• SUITABLE MEDIA: WATER, OIL & AIR

Dimensions (mm)

Size Weight
DN L H F N B
(Inch) KGS
15 1/2" 56 40 11 2 15 0,14

20 3/4" 67 46 11 2 18 0,18

25 1" 74 50 14 2 20 0,31
Materials
32 1.1/4" 96 67 15 2 31 0,50
Description Material
40 1.1/2" 104 74 15 2 37 0,73
Body Brass CW617N UNI-EN 12165
50 2" 125 90 18 2 44 1,19

65 2.1/2" 146 107 19 3 58 2,17 Screen Stainless Steel AISI 304

80 3" 170 123 21 3 70 2,70 Gasket PTFE

100 4" 210 152 25 3 85 6,40 Cap Brass CW617N UNI-EN 12165

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
21
BS 302
BRASS CHECK VALVE
SWING TYPE www.ecivalve.it

Specifications:

• WORKING PRESSURE: PN 16
Dimensions (mm) • WORKING TEMPERATURE: 0°C + 90°C
• METAL SEAT
DN SIZE INCH L H F B Weight(KGS) • THREADING ACCORDING TO ISO 228/1
• SUITABLE FOR WATER, OIL & AIR
15 1/2" 47 51 8 15 0,16

20 3/4" 53 58 8 20 0,20

25 1" 63 68 10 25 0,35
Materials
32 1.1/4" 70 78 10 33 0,42
DESCRIPTION MATERIAL
40 1.1/2" 88 98 10 37 0,76
Body CW 617N - UNI-EN 12165/98
50 2" 97 109 11 47 1,00
Disc CW 617N - UNI-EN 12165/98
65 2.1/2" 120 130 16 55 1,65
Disc Gasket NBR
80 3" 135 145 16 70 2,30 Cap Gasket Heat resisting fiber

100 4" 162 180 20 90 5,10 Cap CW 617N - UNI-EN 12165/98

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
22
BS 501
BRASS GATE VALVE
PN 16 www.ecivalve.it
Non-Rising stem - FXF

Specifications:

• PRESSURE RATING: PN16

• SUITABLE MEDIA: WATER, OIL & AIR
• WORKING TEMPERATURE: 0°C + 90°C
• ISO 288/1 THREAD FXF

Dimensions (mm)
Materials
DN SIZE INCH B F S H V Weight(KGS)
DESCRIPTION MATERIAL
15 1/2” 15 10 38 69 50 0,19 Body CW617N - UNI EN 12165/98

20 3/4” 19 11 44 77 50 0,26 Bonnet CW617N - UNI EN 12165/98

25 1” 24 12 48 90 60 0,37 Bonnet gasket Heat resisting fiber

Stem CW614N - UNI EN 12164/98

32 1.1/4” 32 13 51 97 60 0,53
Wedge CW617N - UNI EN 12165/98
40 1.1/2” 37 14 58 108 70 0,71
Screwed ring CW614N - UNI EN 12164/98
50 2” 47 15 63 131 80 1,16
Packing PTFE
65 2.1/2” 60 15 64 155 90 1,70
Packing nut CW614N - UNI EN 12164/98
80 3” 72 18 75 183 100 2,47 Handwheel Steel blue paint

100 4” 93 19 85 225 120 4,50 Nut Steel zinc plated

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
23
BS 502
BRASS GATE VALVE
PN 20 www.ecivalve.it
Non-Rising stem
Conforms to PED 97/23/CE & it is CE marking-free as
per art. 3 par. 3

Specifications:

• PRESSURE RATING: PN20

• SUITABLE MEDIA: WATER, OIL & AIR
• WORKING TEMPERATURE: T ≤ 80°C
• TAPER PIPE THREAD TO NPT AND ISO 228/1

Dimensions (mm)

DN SIZE INCH F L H D Weight(KGS)

15 ½” 15 43 68 45 0.200 Materials

20 ¾” 19 47 78 50 0.290 DESCRIPTION MATERIAL

25 1" 24 53 92 55 0.400 Body: Ø up to 2” Brass CW 617 N-UNI-EN12165

Ø 2½” to 4” Brass DELTA C EN1982 CB 7545

32 1¼” 32 57 108 60 0.620
Bonnet Brass CW 617 N-UNI-EN12165
40 1½” 37 61 125 70 0.750
Stem & Gland Brass CW 614 N-UNI-EN12164
50 2" 47 67 143 80 1.240
Packing EPDM90 DUTRAL
65 2½” 60 74 175 100 1.900
Wedge Brass DELTA C EN1982 CB 7545
80 3" 72 86 205 100 2.560 Handwheel Steel with blue plastic coating

100 4" 93 98 235 120 4.640 Handwheel Nut Steel Zinc plated

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
24
BS 910
BRASS AUTOMATIC AIR VENT
www.ecivalve.it

Specifications:

• WORKING PRESSURE: PN 10
• WORKING TEMPERATURE: T ≤ 110°C
• SINGLE AUTOMATIC FLOAT
• THREADING ACCORDING TO ISO 228/1
• SUITABLE FOR FLUID ACCORDING TO UNI 8065

Materials
Dimensions (mm)
DESCRIPTION MATERIAL
DN SIZE INCH a D H Weight(KGS)
Body Brass EN 1982-CB754S
10 ⅜” 9 46 70 0.146
Seat Brass EN 12164-CW617N
15 ½” 9 46 70 0.157
Seat Gasket NBR
20 ¾” 9 46 70 0.160 Float Polypropilene PP

25 1” 13 46 70 0.190 Spring Stainless Steel AISI 302

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
25
Cast-Iron Valves

G 101 28
G 103 29
G 201 30
G 203 31
G 301 32
G 303 33
G 311 34
G 401 35
G 403 36
G 501 37
G 503 38
G 505 39
G 507 40
G 801 41

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
27
G 101
DUCTILE IRON BUTTERFLY VALVE
WAFER SEMI-LUGGED TYPE WITH www.ecivalve.it
LEVER
Conforms to MSS SP-67per art. 3 par. 3

Specifications:

• WAFER SEMI-LUGGED TYPE BUTTERFLY VALVE WITH LEVER

• END CONNECTION SUITABLE FOR FLANGE CONNECTION ANSI
B16.5 CLASS 150 OR PN16
• PRESSURE RATING 150 PSI
• DESIGNED & MANUFACTURED TO MEET MSS SP-67 STANDARD Dimensions (mm)
• NOT SUITABLE FOR STEAM
• SUITABLE MEDIA: FRESH WATER, SEWAGE, SEA WATER, AIR, OIL, WEIGHT
DN H H1 H2 Ød n-Ød BOLTS L
ACID & CORROSIVE MEDIA KGS
• WORKING TEMPERATURE FROM -15 TO +120°C / -5°F TO +249°F 50 273 32 161 121 4-Ø19 4 - ⅝” - 11UNC 42.0 2.50
65 296 32 175 140 4-Ø19 4 - ⅝” - 11UNC 45.0 3.10
80 308 32 181 153 4-Ø19 4 - ⅝” - 11UNC 44.5 3.70
Materials 100 346 32 200 191 4-Ø19 8 - ⅝” - 11UNC 51.0 5.20
125 372 32 213 216 4-Ø22 8 - ¾” - 10UNC 54.5 6.50
No. DESCRIPTION MATERIAL AMERICAN STANDARD
1 Body Ductile Iron ASTM A 536 65-45-12 150 397 32 226 242 4-Ø22 8 - ¾” - 10UNC 54.8 8.50

2 Seat EPDM - 200 480 40 260 299 4-Ø22 8 - ¾” - 10UNC 59.6 14.00
3 Disc Stainless Steel SS304/316 250 545 50 295 362 4-Ø25 12 - ⅞” - 9UNC 67.0 21.00
4 Shaft Stainless Steel SS410 300 634 55 310 432 4-Ø25 12 - ⅞” - 9UNC 75.9 32.00

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
28
G 103
DUCTILE IRON BUTTERFLY VALVE
WAFER SEMI-LUGGED GEAR OPERATED www.ecivalve.it
Conforms to MSS SP-67

Specifications:

• WAFER SEMI-LUGGED TYPE BUTTERFLY VALVE WITH GEAR

OPERATION
• END CONNECTION SUITABLE FOR FLANGE CONNECTION ANSI
B16.5 CLASS 150 OR PN16
• PRESSURE RATING 150 PSI
• DESIGNED & MANUFACTURED TO MEET MSS-SP 67 STANDARD
• NOT SUITABLE FOR STEAM
• SUITABLE MEDIA: FRESH WATER, SEWAGE, SEA WATER, AIR, OIL,
ACID & CORROSIVE MEDIA
• WORKING TEMPERATURE FROM -15 TO +120°C / -5°F TO +249°F
Dimensions (mm)
DN H1 H2 Ød 4-Ød BOLTS L WEIGHT KGS
Materials 150 226 139 242 4-Ø22 8 - ¾” - 10UNC 54.8 11.50
200 260 175 299 4-Ø22 8 - ¾” - 10UNC 59.6 19.50
AMERICAN
No. DESCRIPTION MATERIAL 250 292 203 362 4-Ø25 12 - ⅞” - 9UNC 67.0 25.00
STANDARD
1 Body Ductile Iron ASTM A 395 300 337 242 432 4-Ø25 12 - ⅞” - 9UNC 75.9 38.00
2 Seat EPDM - 350 368 267 476 4-Ø29 12 - 1” - 8UNC 75.5 44.00
3 Disc Stainless Steel SS304/316 400 400 309 540 4-Ø29 16 - 1” - 8UNC 90.0 72.00
4 Shaft Stainless Steel SS410 450 422 327 578 4-Ø32 12 - 1⅛” - 7UNC 104 85.00

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
29
G 201
CAST IRON STRAINER, Y TYPE
CL-125 FLANGED www.ecivalve.it

Specifications:
• 125 PSI/8.6 BAR SATURATED STEAM TO 353°F/178°C
• 200 PSI/13.8 BAR WOG FROM -10 TO 65 °C
• FLANGE DRILLED CONFORM TO ANSI B16.1 CL 125
• FACE TO FACE DIMENSION CONFORMS TO SERIES 1 OF BS EN
558-1
• SUITABLE MEDIA: WATERS, OIL, AIR & STEAM

Materials
No. DESCRIPTION MATERIAL AMERICAN STANDARD
1 Body Cast Iron ASTM A 126 B
2 Screen Stainless Steel ANSI 304
3 Bonnet Cast Iron ASTM A 126 B
4 Gasket Graphite Non Asbestos
5 Screw Plug Brass ASTM B584 C84400
6 Bolt Steel ASTM A 307

Dimensions (mm)
DN SIZE INCH L D D1 B f n-d H WEIGHT KGS
50 2 230 152 121 20 3 4-19 156 10.1
65 2½ 290 178 140 20 3 4-19 176 14.0
80 3 310 190 153 22 3 4-19 199 20.3
100 4 350 229 191 24 3 8-19 240 26.6
125 5 400 254 216 26 3 8-22 292 39.8
150 6 480 279 241 26 3 8-22 320 57.0
200 8 600 343 299 30 3 8-22 399 97.0
250 10 730 406 362 32 3 12-25 516 163.5
300 12 850 483 432 32 4 12-25 568 233.5
350 14 980 533 477 36 4 12-29 648 312.0
400 16 1100 597 540 38 4 16-29 759 422.0

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
30
G 203
CAST IRON STRAINER, Y TYPE
PN16 Flanged www.ecivalve.it

Specifications:
• 16 BAR FROM -10 TO 120 °C, 13 BAR AT 220 °C
• FLANGE DRILLED CONFORM TO BS-EN 1092-2 PN16
• FACE TO FACE DIMENSION CONFORMS TO SERIES 1 OF BS EN
558-1
• SUITABLE MEDIA: WATERS, OIL, AIR & STEAM

Materials
No. DESCRIPTION MATERIAL BRITISH STANDARD
1 Body Cast iron 1561EN JL 1030
2 Screen Stainless 1449304S315
3 Bonnet Cast Iron 1561EN JL 1030
4 Gasket Graphite Non Asbestos
5 Screw Plug Brass Mn Brass
6 Bolt Steel BS979 43A

Dimensions (mm)
DN L D D1 D2 B f n-d H WEIGHT KGS
50 230 165 125 102 20 3 4-19 156 10.9
65 290 185 145 122 20 3 4-19 176 14.5
80 310 200 160 138 22 3 8-19 199 20.9
100 350 220 180 158 24 3 8-19 240 26.8
125 400 250 210 188 26 3 8-19 292 40.2
150 480 285 240 212 26 3 8-23 320 57.1
200 600 340 295 288 30 3 12-23 399 97.1
250 730 405 355 320 32 3 12-28 516 163.0
300 850 460 410 378 32 4 12-28 568 228.4
350 980 520 470 438 36 4 16-28 648 312.0
400 1100 580 525 490 38 4 16-31 759 422.0

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
31
G 301
CAST IRON SWING CHECK VALVE
CLASS 125 www.ecivalve.it
Conforms to MSS SP-71

Specifications:

• 125 PSI/8.6 BAR SATURATED STEAM TO 449°F/232°C 200 PSI/13.8 BAR

COLD WORKING PRESSURE FROM -20°F TO 150°F/-29°C TO 66°C
• TEST PRESSURES HYDRAULIC: BODY: 24 BAR, SEAT: 17.6 BAR
• DESIGN AND MANUFACTURE CONFORM TO MSS SP-71
• FACE TO FACE DIMENSIONS CONFORM TO ANSI B16.10
• FLANGE DRILLED CONFORMS TO ANSI B16.1 CLASS 125
• SUITABLE MEDIA: WATER & OIL
• BOLTED COVER
• SUITABLE FOR MOUNTING IN HORIZONTAL AND VERTICAL PIPELINES
(WITH THE FLOW UPWARDS OR IN ANY INTERMEDIATE POSTION) Materials
No. DESCRIPTION MATERIAL AMERICAN STANDARD
1 Body Cast Iron ASTM A 126 B
Dimensions (mm) 2 Seat Ring Bronze ASTM B 62
SIZE WEIGHT 3 Disc Ring Bronze ASTM B 62
DN L D D1 B n-d H
INCH KGS 4 Disc Cast Iron ASTM A 126 B
50 2 203 152 121 15.9 4-19 112 10.4
5 Hanger Ductile Iron ASTM A536 60-40-18
65 2.1/2 216 178 140 17.5 4-19 132 14.2 6 Washer Steel ASTM A 307
80 3 241 190 153 19.0 4-19 141 19.0 7 Nut Steel ASTM A 307
100 4 292 229 191 23.8 8-19 162 33.3 8 Split Pin Stainless Steel ANSI 304
125 5 330 254 216 23.8 8-22 192 49.0 9 Disc Screw Steel ASTM A 307
150 6 356 279 241 25.4 8-22 211 63.6 10 Side Pin Brass ASTM B584 C84400
Steel
200 8 495 343 299 28.6 8-22 270 112.0 11 Gasket -
Cardboard
250 10 622 406 362 30.2 12-25 316 189.5 12 Hanger Pin Stainless Steel ANSI 304
300 12 698 483 432 31.8 12-25 357 247.0 13 Bonnet Cast Iron ASTM A 126 B
350 14 787 533 477 34.9 12-29 560 419 14 Gasket Graphite Non Asbestos
400 16 914 597 540 36.5 16-29 589 542 15 Bolt Steel ASTM A 307
16 Nut Steel ASTM A 307
450 18 914 635 578 39.7 16-32 645 656
Identification
500 20 1016 699 635 42.9 20-32 702 832 17 Aluminum -
Plate
600 24 1219 813 750 47.6 20-35 812 1260 18 Pin Stainless Steel ANSI 304

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
32
G 303
CAST IRON SWING CHECK VALVE
BS PN16 www.ecivalve.it
Conforms to BS EN 12334:2001

Specifications:

• PRESSURE-TEMPERATURE RATING: BS EN 1092-2 PN16 16 BAR

FROM-10 TO 120°C 13 BAR AT 220°C
• TEST PRESSURES HYDRAULIC: BODY: 24 BAR, SEAT: 17.6 BAR
• DESIGN AND MANUFACTURE CONFORM TO BS5153 & BS EN
12334:2001
• FACE TO FACE DIMENSIONS CONFORM TO SERIES 10 OF BS EN
558 - 1
• FLANGE DRILLED CONFORMS TO BS EN 1092-2 PN16
• SUITABLE MEDIA: WATER & OIL
• BOLTED COVER
• SUITABLE FOR MOUNTING IN HORIZONTAL AND VERTICAL
PIPELINES (WITH THE FLOW UPWARDS OR IN ANY INTERMEDIATE Materials
POSITION)
No. DESCRIPTION MATERIAL BRITISH STANDARD
1 Body Cast Iron 1561 EN JL 1030
2 Seat Ring Bronze 1982 CC491K
Dimensions (mm)
3 Disc Ring Bronze 1982 CC491K
WEIGHT
DN L D D1 D2 B n-d F H 4 Disc Cast Iron 1561 EN JL 1030
KGS
50 203 165 125 102 20 4-19 3 112 11.2 5 Hanger Ductile Iron BS2789 Gr420-12

65 216 185 145 122 20 4-19 3 132 14.4 6 Washer Steel BS970 43A
7 Nut Steel BS970 43A
80 241 200 160 138 22 8-19 3 141 20.0
Stainless
100 292 220 180 158 24 8-19 3 162 31.5 8 Split Pin 1449 304S315
Steel
125 330 250 210 188 26 8-19 3 192 47.0 9 Disc Screw Steel BS970 43A

150 356 285 240 212 26 8-23 3 211 63.5 10 Side Pin Brass Mn Brass
Steel
200 495 340 295 288 30 12-23 3 270 106.4 11 Gasket -
Cardboard
Stainless
250 622 405 355 320 32 12-28 3 316 184.5 12 Hanger Pin 1449 304S315
Steel
300 698 460 410 378 32 12-28 4 357 238.5 13 Bonnet Cast Iron 1561 EN JL 1030
350 787 520 470 438 36 16-28 4 560 419 14 Gasket Graphite Non Asbestos
400 914 580 525 490 38 16-31 4 589 542 15 Bolt Steel BS970 43A
450 914 640 585 550 40 20-31 4 645 656 16 Nut Steel BS970 43A
500 1016 715 650 610 42 20-34 4 702 832 17 Identification Aluminum -
Stainless
600 1219 840 770 725 48 20-37 5 812 1260 18 Pin 1449 304S315
Steel

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
33
G 311
CAST IRON CHECK VALVE WAFER TYPE
ANSI 125 WP & PN 16 www.ecivalve.it
Conforms to MSS SP-125

Specifications:

• PRESSURE RATING ANSI 125

• END CONNECTION SUITABLE FOR FLANGE CONNECTION ANSI B16.1 125 OR EN
1092-2 PN16
• USE ONLY FLAT FLANGES AND RING GASKETS
• FACE TO FACE DIMENSIONS CONFORM TO BS EN 558 SERIES 16
• TEMPERATURE OPERATING RANGE -20 TO 120°C Materials
• SUITABLE FOR INSTALLATION IN VERTICAL AND HORIZONTAL PIPELINES
• IN VERTICAL PIPELINES, THE FLOW MUST BE IN AN UPWARD DIRECTION SIZE WEIGHT
• NOT SUITABLE FOR STEAM DN A B C H
INCH KGS
• SUITABLE MEDIA: WATER, AIR, OIL, ACID AND CORROSIVE MEDIA
50 2 105 65 42.5 54 1.5
65 2½ 124 80 59.9 54 2.0
80 3 137 94 62.6 57 2.8
Dimensions (mm) 100 4 175 117 84.2 64 4.1
No. DESCRIPTION MATERIAL AMERICAN STANDARD 125 5 197 145 113 70 6.4
Body: 150 6 222 170 141 76 8.5
Cast Iron ASTM A 126 B
1 Up to 12” 200 8 279 224 194 95 13.5
Ductile Iron ASTM A536 65-45-12
14” to 18”
250 10 340 265 229 108 22.0
2 Disc Stainless Steel SS304/SS316 300 12 410 310 279 143 30.0
3 Liner EPDM - 350 14 451 360 312 184 61.0
4 Shaft Stainless Steel SS410 400 16 514 410 370 191 78.0
5 Spring Stainless Steel SS316 450 18 546 450 414 203 100.0

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
34
G 401
CAST IRON GLOBE VALVE
ANSI CL 125 FLANGED www.ecivalve.it
OUTSIDE SCREW & YOKE
CONFORMS TO MSS SP-85

Specifications: Materials
No. DESCRIPTION MATERIAL AMERICAN STANDARD
• OUTSIDE SCREW & YOKE
• 125 PSI/8.6 BAR FLUID PRESSURE TO 384°F/230°C 1 Body Cast Iron ASTM A 126 B
• 200 PSI/13.8 BAR NON-SHOCK COLD WORKING PRESSURE FROM 2 Body Seat Ring Bronze ASTM B 62
-20°F TO 150°F/ -29°C TO 66°C
• SUITABLE MEDIA: WATER, OIL, AIR & STEAM 3 Disc Seat Ring Bronze ASTM B 62
• DESIGN AND MANUFACTURE CONFORM TO MSS SP-85 4 Disc Cast Iron ASTM A 126 B
• FACE TO FACE DIMENSIONS CONFORM TO ANSI B16.10
• FLANGE DRILLED CONFORM TO ANSI B16.1 CLASS 125 5 Disc Washer Stainless Steel ANSI 304
6 Disc Nut Stainless Steel ANSI 304
7 Stem Stainless Steel ANSI 304
8 Gasket Graphite Non Asbestos
Dimensions (mm)
9 Bolt Steel ASTM A 307
WEIGHT
DN NCH L D D1 n-d B Do 10 Packing Graphite Non Asbestos
KGS
50 2 203 152 121 4-19 15.9 180 15.6 11 Bonnet Cast Iron ASTM A 126 B
65 2½ 216 178 140 4-19 17.5 180 21.5 ASTM A536
12 Gland Flange Ductile Iron
60-40-18
80 3 241 190 153 4-19 19.1 200 30.9
13 Nut Steel ASTM A 307
100 4 292 229 191 8-19 23.9 254 46.8
14 Bolt Steel ASTM A 307
125 5 330 254 216 8-22 23.9 254 68.4 ASTM B584
15 Stem Nut Brass
150 6 356 279 241 8-22 25.4 300 92.6 C84400

200 8 495 343 299 8-22 28.6 300 157 16 Handwheel Cast Iron ASTM A 126 B
Handwheel
250 10 622 406 362 12-25 30.2 350 229 17 Steel ASTM A 307
Washer
300 12 698 483 432 12-25 31.8 400 318 18 Handwheel Nut Steel ASTM A 307

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
35
G 403
CAST IRON GLOBE VALVE
BS PN16 FLANGED www.ecivalve.it
Rising stem
Conforms to BS EN 13789:2010

Specifications:

• OUTSIDE SCREW & YOKE

• PRESSURE-TEMPERATURE RATING: 16 BAR AT -10 TO 120°C 12.1 BAR
Materials
AT 230°C
• TEST PRESSURES HYDRAULIC: SHELL: 24 BAR, SEAT: 17.6 BAR No. DESCRIPTION MATERIAL BRITISH STANDARD
• DESIGN AND MANUFACTURE CONFORM TO BS5152 (BS EN 1 Body Cast Iron 1561 EN JL 1030
13789:2010 PN16)
2 Body Seat Ring Bronze 1982 CC 491K
• FACE TO FACE DIMENSIONS CONFORM TO SERIES 10 OF BS EN 558-1
• FLANGE DRILLED CONFORM TO BS EN 1092-2 PN16 3 Disc Seat Ring Bronze 1982 CC 491K
• GATE VALVES ARE DESIGNED TO BE IN AN OPEN OR CLOSED POSI-
4 Disc Cast Iron 1561 EN JL 1030
TION
• SUITABLE MEDIA: WATER, OIL, AIR & STEAM 5 Disc Washer Stainless Steel 1449 304S315
6 Nut Brass 12164 CW603R
7 Stem Stainless Steel 1449 304S315
8 Flange Gasket Graphite Non Asbestos
Dimensions (mm)
9 Bolt Steel BS970 43A
WEIGHT
DN L D D1 D2 n-d B f Do 10 Packing Graphite Non Asbestos
KGS
50 203 165 125 102 4-19 20 3 180 16.4 11 Bonnet Cast Iron 1561 EN JL 1030
65 216 185 145 122 4-19 20 3 180 22.0 12 Gland Ductile Iron BS2789 Gr.420-12
80 241 200 160 138 8-19 22 3 200 31.5
13 Nut Steel BS970 43A
100 292 220 180 158 8-19 24 3 254 46.0
14 Bolt Steel BS970 43A
125 330 250 210 188 8-19 26 3 254 68.7
15 Stem Brass 12164 CW603R
150 356 285 240 212 8-23 26 3 300 92.8
200 495 340 295 288 12-23 30 3 300 157 16 Handwheel Cast Iron 1561 EN JL 1030
Handwheel
250 622 405 355 320 12-28 32 3 350 228 17 Steel BS970 43A
Washer
300 698 460 410 378 12-28 32 4 400 313 18 Handwheel Nut Steel BS970 43A

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
36
G 501
CAST IRON GATE VALVE
ANSI CL 125 FLANGED www.ecivalve.it
Non-Rising stem
Conforms to MSS SP-70

Specifications:

• INSIDE SCREW NON-RISING STEM

• 125 PSI/8.6 BAR FLUID PRESSURE TO 353°F/178°C
• 200 PSI/13.8 BAR NON-SHOCK COLD WORKING PRESSURE FROM -20°F
TO 150°F/ -29°C TO 66°C
• SUITABLE MEDIA: WATER & OIL Materials
• DESIGN AND MANUFACTURE CONFORM TO MSS SP-70
• FACE TO FACE DIMENSIONS CONFORM TO ANSI B16.10
No. DESCRIPTION MATERIAL AMERICAN STANDARD
• FLANGE DRILLED CONFORM TO ANSI B16.1 CLASS 125
• GATE VALVES ARE DESIGNED TO BE IN AN OPEN OR CLOSED POSITION 1 Body Cast Iron ASTM A 126 B
2 Body Seat Ring Bronze ASTM B 62
3 Wedge Seat Ring Bronze ASTM B 62
4 Wedge Cast Iron ASTM A 126 B
Dimensions (mm)
5 Stem Brass ASTM B 16
SIZE WEIGHT
DN L D D1 n-d B Do H 6 Stem Nut Brass ASTM B584 C84400
INCH KG
50 2 178 152 121 4-19 15.9 180 240 12.0 7 Gasket Graphite Non Asbestos
65 2½ 190 178 140 4-19 17.5 180 265 15.4 8 Bolt Steel ASTM A 307
80 3 203 190 153 4-19 19.1 200 323 22.6 9 Nut Steel ASTM A 307
100 4 229 229 191 8-19 23.9 254 365 35.8 10 Bonnet Cast Iron ASTM A 126 B
125 5 254 254 216 8-22 23.9 254 413 47.6 11 Bonnet Bush Brass ASTM B584 C84400
150 6 267 279 241 8-22 25.4 300 477 63.0 12 Packing Graphite Non Asbestos
200 8 292 343 299 8-22 28.6 300 585 106 ASTM A536
13 Gland Follower Ductile Iron
60-40-18
250 10 330 406 362 12-25 30.2 350 710 168
300 12 356 483 432 12-25 31.8 400 789 243 14 Bolt Steel ASTM A 307
350 14" 381 533.4 476.3 12-28.6 34.9 560 987 391
15 Nut Steel ASTM A 307
400 16" 406.4 597 539.8 16-28.6 36.5 560 1044 520
16 Handwheel Cast Iron ASTM A 126
450 18" 432 635 578 16-32 39.7 610 1148 684
500 20" 457 699 635 20-32 42.9 610 1257 800 17 Washer Steel ASTM A 307

600 24" 508 813 749.5 20-35 47.6 765 1418 1205 18 Handwheel Nut Steel ASTM A 307

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
37
G 503
CAST IRON GATE VALVE
BS PN16 FLANGED www.ecivalve.it
Non-Rising stem
Conforms to BS EN 1171:2002 PN16

Specifications:

• PRESSURE-TEMPERATURE RATING: 16 BAR AT -10 TO 120°C 12.8 BAR AT

200°C
• TEST PRESSURES HYDRAULIC: SHELL: 24 BAR, SEAT: 17.6 BAR
• DESIGN AND MANUFACTURE CONFORM TO BS5150 (BS EN 1171:2002 PN
16)
• FACE TO FACE DIMENSIONS CONFORM TO SERIES 3 OF BS EN 558-1
• FLANGE DRILLED CONFORM TO BS EN 1092-2 PN 16 Materials
• GATE VALVES ARE DESIGNED TO BE IN AN OPEN OR CLOSED POSITION
• SUITABLE MEDIA: WATER & OIL No. DESCRIPTION MATERIAL BRITISH STANDARD
1 Body Cast iron 1561 EN JL 1030
2 Body Seat Ring Bronze 1982 CC 491K
Dimensions (mm) 3 Wedge Seat Ring Bronze 1982 CC 491K
WEIGHT 4 Wedge Cast Iron 1561 EN JL 1030
DN L D D1 D2 n-d B f Do H
KGS 5 Stem Brass 12164 CW603R
50 178 165 125 102 4-19 20 3 180 240 13.5 6 Stem Nut Brass Mn Brass
65 190 185 145 122 4-19 20 3 180 265 16.7 7 Gasket Graphite Non Asbestos
80 203 200 160 138 8-19 22 3 200 323 23.3 8 Bolt Steel BS970 43A
100 229 220 180 158 8-19 24 3 254 365 35.9 9 Nut Steel BS970 43A
125 254 250 210 188 8-19 26 3 254 413 48.5 10 Bonnet Cast Iron 1561 EN JL 1030
150 267 285 240 212 8-23 26 3 300 477 66.5 11 Bonnet Bush Brass Mn Brass
200 292 340 295 288 12-23 30 3 300 585 102 12 Packing Graphite Non Asbestos
250 330 405 355 320 12-28 32 3 350 710 174
13 Gland Follower Ductile Iron BS2789 Gr.420-12
300 356 460 410 378 12-28 32 4 400 789 230
14 Bolt Steel BS970 43A
350 381 520 470 429 16-28 36 4 560 987 420
15 Nut Steel BS970 43A
400 406.4 580 525 480 16-31 38 4 560 1044 598
450 432 640 585 548 20-31 40 4 610 1148 733 16 Handwheel Cast Iron 1561 EN JL 1030

500 457 715 650 609 20-34 42 4 610 1257 937 17 Handwheel Washer Steel BS970 43A
600 508 840 770 720 20-37 48 5 765 1418 1211 18 Handwheel Nut Steel BS970 43A

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
38
G 505
CAST IRON GATE VALVE
ANSI CL 125 FLANGED www.ecivalve.it
Rising stem
Conforms to MSS SP-70

Specifications: Materials
• OUTSIDE SCREW & YOKE No. DESCRIPTION MATERIAL AMERICAN STANDARD
• 125 PSI/8.6 BAR FLUID PRESSURE TO 353°F/178°C 1 Body Cast iron ASTM A 126 B
• 200 PSI/13.8 BAR NON-SHOCK COLD WORKING PRESSURE FROM -20°F TO
150°F/ -29°C TO 66°C 2 Body Seat Ring Bronze ASTM B 62
• TEST PRESSURE SHELL 24.1 BAR & SEAT 13.8 BAR
3 Wedge Seat Ring Bronze ASTM B 62
• SUITABLE MEDIUM: WATER & OIL
• DESIGN AND MANUFACTURE CONFORM TO MSS SP-70 4 Wedge Cast Iron ASTM A 126 B
• FACE TO FACE DIMENSIONS CONFORM TO ANSI B16.10
5 Stem Brass ASTM B 16
• FLANGE DIMENSIONS CONFORM TO ANSI B16.1 CLASS 125
• GATE VALVES ARE DESIGNED TO BE IN AN OPEN OR CLOSED POSITION 6 Gasket Graphite Non-Asbestos
7 Bolt Steel ASTM 307
8 Nut Steel ASTM 307
Dimensions (mm) 9 Bonnet Cast Iron ASTM A 126 B
10 Packing Graphite Non-Asbestos
SIZE H WEIGHT
DN L D D1 n-d B Do
INCH CLOSED KG ASTM A536
11 Gland Follower Ductile Iron
60-40-18
50 2 178 152 121 4-19 15.9 180 258 13.1
65 2½ 190 178 140 4-19 17.5 180 302 17.4 12 Bolt Steel ASTM 307
80 3 203 190 153 4-19 19.1 200 341 22.8
13 Nut Steel ASTM 307
100 4 229 229 191 8-19 23.9 254 415 37.5
125 5 254 254 216 8-22 23.9 254 484 48.0 14 Stem Nut Brass ASTM B584 C884400
150 6 267 279 241 8-22 25.4 300 560 64.7 Handwheel
15 Brass ASTM B584 C884400
200 8 292 343 299 8-22 28.6 300 703 106.0 Washer
16 Handwheel Cast Iron ASTM A 126 B
250 10 330 406 362 12-25 30.2 350 865 178.2
300 12 356 483 432 12-25 31.8 400 1028 266.9 17 Handwheel Nut Steel ASTM 307

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
39
G 507
CAST IRON GATE VALVE
PN 16 FLANGED www.ecivalve.it
RISING STEM
Conforms to BS EN 1171:2002 PN16

Specifications:

• OUTSIDE SCREW & YOKE

• PRESSURE-TEMPERATURE RATING: 16 BAR AT -10 TO 120°C 12.8
BAR AT 200°C Materials
• TEST PRESSURES HYDRAULIC: SHELL: 24 BAR, SEAT: 17.6 BAR
• DESIGN AND MANUFACTURE CONFORM TO BS5150 (BS EN No. DESCRIPTION MATERIAL BRITISH STANDARD
1171:2002 PN 16) 1 Body Cast Iron 1561 EN JL 1030
• FACE TO FACE DIMENSIONS CONFORM TO SERIES 3 OF BS EN
558-1 2 Seat Ring Bronze 1982 CC 491K
• FLANGE DRILLED CONFORM TO BS EN 1092-2 PN 16 3 Wedge Seat Ring Bronze 1982 CC 491K
• GATE VALVES ARE DESIGNED TO BE IN AN OPEN OR CLOSED
POSITION 4 Wedge Cast Iron 1561 EN JL 1030
• SUITABLE MEDIA: WATER & OIL 5 Stem Brass 12164 CW603R
6 Gasket Graphite Non Asbestos
7 Bolt Steel Steel
Dimensions (mm)
8 Nut Steel Steel
H WEIGHT
DN L D D1 D2 n-d B f Do 9 Bonnet Cast Iron 1561 EN JL 1030
CLOSED KGS
10 Packing Graphite Non Asbestos
50 178 165 125 102 4-19 20 3 180 240 14.1
65 190 185 145 122 4-19 20 3 180 265 18.2 ASTM A536
11 Gland Follower Ductile Iron
60-40-18
80 203 200 160 138 8-19 22 3 200 323 23.8
12 Bolt Steel Steel
100 229 220 180 158 8-19 24 3 254 365 36.1
13 Nut Steel Steel
125 254 250 210 188 8-19 26 3 254 413 48.9
14 Stem Nut Brass Mn Brass
150 267 285 240 212 8-23 26 3 300 477 66.3
200 292 340 295 288 12-23 30 3 300 585 102 15 Handwheel Washer Brass Mn Brass

250 330 405 355 320 12-28 32 3 350 710 184 16 Handwheel Cast Iron EN JL 1030

300 356 460 410 378 12-28 32 4 400 789 254 17 Handwheel Nut Steel Steel

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
40
G 801
DUCTILE IRON BALANCING VALVE
VARIABLE ORIFICE DOUBLE REGULATING www.ecivalve.it
VALVE (VODRV)
FLANGED TO CLASS 125 OR PN16
Conforms to BS 7350 PN16

Pressure / Temperature Ratings

Specifications:
TEMPERATURE (°C) PRESSURE (BAR)
• Y PATTERN GLOBE VALVE SUPPLIED WITH TWO TEST POINTS
-10 to 120 16.0
• PROVIDE FLOW MEASURMENT & REGULATION
Ratings align with BS EN 1092-2 PN16 • TO BE USED FOR ISOLATING & TO BE REOPENED TO IT’S PRESET
(formerly BS 4504) or CL 125 POSITION
• ACCURACY ± 5% ON ALL SETTING
• DESIGN & MANUFACTURE CONFORM TO BS 7350 PN16
Materials • SUITABLE MEDIUM: WATER
• WORKING TEMPERATURE: T ≤ 12O° C
PART NAME MATERIAL BRITISH STANDARD
1 Body Ductile Iron EN-JS 1040/65-45-12
Coefficents
2 Seal Gasket EPDM EPDM
DN FLOW (Kv) HEADLOSS (K)
3 Disc Brass EN12165 CW617N
65 104 5.32
4 Stem Nut Brass EN12165 CW617N 80 116 6.48
From DN65-DN300 BS970 410S21 100 213 13.15
5 Stem Stainless Steel From DN350-DN500 BS970 431S29 125 333 8.32
DN600 SS630 150 476 7.33
6 Cover Ductile Iron EN-JS 1040 200 768 8.26
Stem Locking 250 1153 7.27
7 Brass EN12165 CW617N
Bush 300 1743 8.36
From DN65-DN300 EN12165
Limit Set of Brass *Fully open position.
8 CW617N+Galvanization
Indicator Stainless Steel From DN350-DN600 BS970 304S15
Orinted Set of Dimensions (mm)
9 Brass EN12165 CW617N
Indicator
10 Directed Circle ABS ABS DN H L B Ø Ød1 Ød2 Ød3 N-Ød4 F
11 Indicator ABS ABS 65 263 290 19 200 185 145 118 4-Ø 19 3
12 Packing PTFE+EPDM PTFE+EPDM 80 268 310 19 200 200 160 132 8-Ø 19 3
13 Hand wheel Ductile Iron EN-JS 1040/65-45-12 100 300 350 19 240 220 180 156 8-Ø 19 3
14 Plug Steel Steel 125 328 400 19 290 250 210 184 8-Ø 19 3
15 Bolt Stainless Steel BS970 304S15 150 340 480 19 290 285 240 211 8-Ø 23 3
16 Big Gasket Stainless Steel BS970 304S15
200 525 600 20 350 340 295 266 12-Ø 23 3
Hexagon
17 Stainless Steel BS970 304S15 250 572 730 22 420 405 355 319 12-Ø 28 3
Socket Screws
18 Bolt Stainless Steel BS970 304S15 300 686 850 24.5 420 460 410 370 12-Ø 28 4
19 Spring Gasket Stainless Steel BS970 304S15
350 681 980 26.5 420 520 470 429 16-Ø 28 4
Indicator Dust 400 965 1100 28 640 580 525 480 16-Ø 31 4
20 ABS ABS
Cover
450 972 1200 30 640 640 585 548 20-Ø 31 4
Brass From DN65-DN150 EN12165 CW617N
500 1065 1250 31.5 640 715 650 609 20-Ø 34 4
21 Packing Gland From DN200-DN600 EN-JS 1040/65-
Ductile Iron 600 1180 1450 36 640 840 770 720 20-Ø 37 5
45-12

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
41
Pressure Independent
Control Valves (PICV)

BS 925 (PICV) 44

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
43
BS 925 (PICV)
PRESSURE INDEPENDENT CONTROL VALVE
PN 25 www.ecivalve.it

The pressure independent control valve, combines an automatic control of the flow rate with a
control of the valve throught an actuator. The valve is able to regulate the flow rate and keep it con-
stant as the differential pressure conditions vary within the hydraulic circuit in which it is installed.
The valve can be used with two operating modes:
• independent control of the pressure (with actuator installed) in accordance with the thermal
load requirements of the circuit section to be controlled;
• limitation of the flow rate and/or shut-off of the fluid (without actuator or with thermo-electric
actuator installed).

Versioni e codici
WORKING FLOW RATE WORKING DIFFERENTIAL PRESSURE
DN RANGE [l/h] RANGE [kPa]
Indicator Handwheel
Code Valve Body Connections
Colour Colour
Size WITH V1100/ V1200 WITHOUT
L (LOW) H (HIGH)
ACTUATORS ACTUATOR
G 1/2”M with
BS925 0015 15 BLUE SKY-BLUE 150÷380 l/h 180÷630 l/h 25÷400 kPa 25÷800 kPa
tail pieces
G 3/4”M with
BS9250020 20 BLACK SKY-BLUE 320÷910 l/h 700÷1175 l/h 25÷400 kPa 25÷800 kPa
tail pieces

G 1”M with tail

BS9250025 20 GREEN SKY-BLUE 290÷1000 l/h 860÷1500 l/h 25÷400 kPa 25÷800 kPa
pieces

G 1-1/4”M with
BS9250032 25 BLACK SKY-BLUE 400÷4700 l/h U/A 25÷400 kPa
tail pieces

Accessories:

• V1100 - Thermoelectric Actuator normally closed 230V

• V1200 - Thermoelectric Actuator normally closed 24V

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
44
BS 925 (PICV)
PRESSURE INDEPENDENT CONTROL VALVE
PN 25 www.ecivalve.it

Dimensions (mm)
DN A
B C D E F G H I L M Weight(KGS)
Valve Body Size Connections
15 G 1/2" M 128 64 99 45 54 49 20 29 ch.30 22 0.625

20 G 3/4" M 136 68 99 45 54 49 20 29 ch.38 22 0.78

20 G 1" M 142 71 99 45 54 49 20 29 ch.38 22 0.825

25 G 1.1/4" M 165 83 111 52 59 65 30 35 ch.53 27 1.56

Technical data:

• Fluids: water, glycol solutions (max. 50 % glycol)

• Temperature range: 5÷120 °C
• Room temperature range: 1÷50 °C
• Max. working pressure: 25 bar (2,5 MPa)
• Working differential pressure range: see table at pag.1
• Working flow rate range: see table at pag.1
• Regulation precision: ± 10 % regulated value
• Leakage rate (according to ISO 5208): class A, no leakage
• Connections for pressure outlets: G 1/4”F
• Actuator connection: M30 x 1,5 mm

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
45
BS 925 (PICV)
PRESSURE INDEPENDENT CONTROL VALVE
PN 25 www.ecivalve.it

Materials:

DESCRIPTION MATERIAL
Body Brass CW602n - UNI EN 12165

Bonnet Brass CW602n - UNI EN 12165

Tail Pieces Brass CW617N - UNI EN 12165

Regulator Stem & Piston Stainless Steel AISI 302

Spring Stainless Steel AISI 302

Membrane EPDM

Stopper EPDM

O-Ring EPDM

Bonnet Seperator PA66-GF30

Operation
Through the manual handwheel it is possible to isolate the circuit section controlled by the val-
ve. Turn the knob clockwise to close the handwheel;
counterclockwise to open it.
• with handwheel closed the complete flow shut-off is obtained;
• with handwheel open the flow rate limitation function is obtained at the preset value (see para-
graph “Flow rate presetting”).

The same function can also be obtained automatically by installing a thermoelectric actuator of
the ON/OFF type, suitably electrically connected:
• with thermo-electric actuator closed the complete flow shut-off is obtained;
• with thermo-electric actuator open the flow rate stabilization function is obtained at the preset
value (see paragraph “Flow rate presetting”).

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
46
BS 925 (PICV)
PRESSURE INDEPENDENT CONTROL VALVE
PN 25 www.ecivalve.it

Flow-rate presetting

The BS9250015/20/25 valves are equipped with a double regulation scale of the flow rate:
• L (LOW): for low flow rate
• H (HIGH): for high flow rate
To set the valve adjustment based on the desired flow rate, use the regulation key included in
the package and turn the valve stem clockwise or counterclockwise until reaching the desired va-
lue printed on the plastic disk of the valve and identifiable through the table below. The transition
from one regulation scale to the other is possible at any time, even during the operation of the
system; in this way it is possible to choose the desired flow rate value without having to replace
the valve.
The BS9250032 valves, instead, are equipped with a single regulation scale of the flow rate.
Example:
Valve required: BS9250015
Design flow rate: 300 l/h
Piping DN15 > Regulation scale: L (LOW)
Position: 5

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
47
BS 925 (PICV)
PRESSURE INDEPENDENT CONTROL VALVE
PN 25 www.ecivalve.it

Flow-rate presetting

WORKING DIFFERENTIAL
WORKING FLOW RATE RANGE [l/h]
PRESSURE RANGE [kPa]
Product
DN Connections WITH
Code
V1100/ Without
Regulation MIN 1 2 3 4 5 6 7 8 9
V1200 Actuator
Actuators
L (LOW) - 150 175 200 250 300 340 380 - -
BS925 0015 15 G 1/2”M 25÷400 kPa 25÷800 kPa
H (HIGH) - 180 250 350 440 500 570 630 - -

L (LOW) - 320 400 520 640 770 870 910 - -

BS9250020 20 G 3/4”M 25÷400 kPa 25÷800 kPa
H (HIGH) - 700 820 910 970 1030 1100 1175 - -

L (LOW) - 290 400 500 640 730 900 1000 - -

BS9250025 20 G 1”M 25÷400 kPa 25÷800 kPa
H (HIGH) - 860 900 940 1110 1270 1330 1500 - -

BS9250032 25 G 1-1/4”M U/ 25÷400 kPa A - 400 670 1200 1800 2300 3000 3600 4300 4700

Installation

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
48
BS 925 (PICV)
PRESSURE INDEPENDENT CONTROL VALVE
PN 25 www.ecivalve.it

Installation of the pressure outlets and flow rate verification through the differential pressu-
re gauge
The valve is equipped with connections for the pressure outlets to be installed with the system
switched off and not under pressure.
Using the differential pressure gauge and its probes suitably housed in the pressure outlets, it is
possible to measure the Δp of the valve (P1-P3) during normal operation.

WARNINGS:
Water leakage may occur through the pressure outlets during the insertion of the probes.
Wear protective clothing and goggles to prevent personal injury during pressure measurement.
Do not use lubricants on the probes to facilitate insertion into the outlets. If necessary, wet the probes with clean water.
Do not leave the probes in the pressure outlet longer than necessary, as this could cause leakage.

Safety Warning. Installation, commissioning and periodical maintenance of the product must be carried out by qualified operators in compliance with national
regulations and/or local standards. A qualified installer must take all required measures, including use of Individual Protection Devices, for his and others’
safety. An improper installation may damage people, animals or objects towards which ECI may not be held liable.

Package Disposal. Carton boxes: paper recycling. Plastic bags and bubble wrap: plastic recycling.

Product Disposal. Do not dispose of product as municipal waste at the end of its life cycle. Dispose of product at a special recycling platform managed by local
authorities or at retailers providing this type of service.

Additional information. For more information, go to the website www.ecivalve.it or contact us via email [email protected]. This document provides only general
indications. The information included in this technical sheet do not exempt the user form strictly complying with the rules and good practice standards in force.

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
49
Valve Accessories

V1100/V120052

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
51
V1100/V1200
Thermo Electric actuator normally Closed ON/OFF
230V/24V for Pressure Independent Control Valve BS925 www.ecivalve.it

Dimensions (mm)

A B C D E Weight(KGS)

48.4 61 44.3 59.1 8.3 0.108

Specifications:

V1100 V1200

• Supply Voltage: 230V AC ± 10%, 50/60Hz • Supply Voltage: 24V AC/DC -10% +20% , 50/60Hz
• Type: Thermal • Type: Thermal
• Power consumption: 1W • Power consumption: 1W
• Control Signal: ON/OFF • Control Signal: ON/OFF
• Failsafe Function: Yes, normally closed • Failsafe Function: Yes, normally closed
• End switch: No • End switch: No
• Operation time: Aprox 4 minutes • Operation time: Aprox 4 minutes
• Actuation force: 100N ± 5% • Actuation force: 100N ± 5%
• Room Temperature: 0°C to 60 °C • Room Temperature: 0°C to 60 °C
• Fluid Temperature: 0°C to 100°C • Fluid Temperature: 0°C to 100°C
• Storage Temperature: -25°C to 60°C • Storage Temperature: -25°C to 60°C
• Cable: Fixed, 2 wires x 0.75mm² PVC, 1m standard M30x1.5mm connection • Cable: Fixed, 2 wires x 0,75mm² PVC, 1m standard M30x1.5mm connection
• Conforms to EN 60730 standard • Conforms to EN 60730 standard

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
52
Certifications

This cer)fies that This cer)fies that This cer)fies that

EUROPEAN CASTING INDUSTRIES S.R.L EUROPEAN CASTING INDUSTRY SRL EUROPEAN CASTING INDUSTRIES S.R.L
has had the undermen)oned product(s) examined, tested and has had the undermen)oned product(s) examined, tested and has had the undermen)oned product(s) examined, tested and
cer)fied as being of an appropriate quality and standard as required cer)fied as being of an appropriate quality and standard as required cer)fied as being of an appropriate quality and standard as required
in the Water Supply (Water Fi@ngs) Regula)ons and Sco@sh Water in the Water Supply (Water Fi@ngs) Regula)ons and Sco@sh Water in the Water Supply (Water Fi@ngs) Regula)ons and Sco@sh Water
Byelaws, subject to scheme requirements being met when installed. Byelaws, subject to scheme requirements being met when installed. Byelaws, subject to scheme requirements being met when installed.

Model Numbers Model Numbers Model Numbers

BR520 GATE VALVES

BR220 Y`-PATTERNED STRAINERS BR525 STOP GATE VALVE

The cer)ficate by itself is not evidence of a valid WRAS Approval. Confirma)on of the current The cer)ficate by itself is not evidence of a valid WRAS Approval. Confirma)on of the current The cer)ficate by itself is not evidence of a valid WRAS Approval. Confirma)on of the current
status of an approval must be obtained from the WRAS Approvals Directory (www.wras.co.uk/ status of an approval must be obtained from the WRAS Approvals Directory (www.wras.co.uk/ status of an approval must be obtained from the WRAS Approvals Directory (www.wras.co.uk/
directory) directory) directory)

The product so men)oned will be valid un)l the end of: The product so men)oned will be valid un)l the end of: The product so men)oned will be valid un)l the end of:

August 2025 October 2025 December 2025

Cer)ficate No. Cer)ficate No. Cer)ficate No.

2008812 2010406 2012010

Ian Hughes, Ian Hughes, Ian Hughes,

WRAS Approvals Manager WRAS Approvals Manager WRAS Approvals Manager

This cer)fies that This cer)fies that

EUROPEAN CASTING INDUSTRY SRL EUROPEAN CASTING INDUSTRIES ECI S.R.L

has had the undermen)oned product(s) examined, tested and has had the undermen)oned product(s) examined, tested and
cer)fied as being of an appropriate quality and standard as required cer)fied as being of an appropriate quality and standard as required
in the Water Supply (Water Fi@ngs) Regula)ons and Sco@sh Water in the Water Supply (Water Fi@ngs) Regula)ons and Sco@sh Water
Byelaws, subject to scheme requirements being met when installed. Byelaws, subject to scheme requirements being met when installed.

Model Numbers Model Numbers

BR 432 (BRONZE GLOBE VALVE) STOP VALVES: ½” TO 2” BR118 SPHERICAL VALVES

BSP (F) INLET/OUTLET

The cer)ficate by itself is not evidence of a valid WRAS Approval. Confirma)on of the current The cer)ficate by itself is not evidence of a valid WRAS Approval. Confirma)on of the current
status of an approval must be obtained from the WRAS Approvals Directory (www.wras.co.uk/ status of an approval must be obtained from the WRAS Approvals Directory (www.wras.co.uk/
directory) directory)

The product so men)oned will be valid un)l the end of: The product so men)oned will be valid un)l the end of:

June 2026 November 2025

Cer)ficate No. Cer)ficate No.

2106001 2011810

Ian Hughes, Ian Hughes,

WRAS Approvals Manager WRAS Approvals Manager

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
53
Notes

All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
54
 Via Lazzaretto, 11
20124 Milan MI, Italy
Tel & Fax #: +39 0263793708
www.ecivalve.it
All data, descriptions and pictures contained in this leaflet may be subject to change without prior notice.
European Casting Industry Srl | Via Lazzaretto, 11 | 20124 Milan MI, Italia | P.Iva: 03228761205 | www.ecivalve.it | [email protected]
56