Page 1 / 3
Certificate number: 23649/A1 EC
File number: AP 4178
Annex A1 Item number: A.1/3.51
This certificate is not valid when presented without the
full attached schedule composed of 7 sections
www.veristar.com
Notified Body 0062 - MARINE EQUIPMENT DIRECTIVE 96/98/EC
EC TYPE EXAMINATION CERTIFICATE
as per Module B of European Union Council Directive 96/98/EC on marine equipment
as amended by Commission Directive 2010/68/EU
This certificate is issued to
DETECTION ELECTRONIQUE FRANCAISE
MASSY CEDEX - FRANCE
for the type of product
FIXED FIRE DETECTION AND FIRE ALARM SYSTEMS COMPONENTS FOR
CONTROL STATIONS, SERVICE SPACES, ACCOMMODATION SPACES, CABIN
BALCONIES, MACHINERY SPACES AND UNATTENDED MACHINERY SPACES
Addressable Multisensor Detector
ORION+
Requirements:
SOLAS 74 convention as amended, Regulations II-2/7, X/3, Reg. II-2/7.2.2, Reg. II-2/7.4, Reg. II 2/7.4.1,
IMO Res. MSC.97(73)-(2000 HSC code) 7, IMO Res. MSC.98(73)-(FSS code) 9, IMO MSC.1/Circ.1242,
EN 54-5 (2000) including A1(2002), EN 54-7 (2000) including A1(2002) and A2(2006),
IEC 60092-504 (2001), IEC 60533 (1999).
This certificate is issued under the French Maritime Authority to attest that BUREAU VERITAS did undertake the relevant type-examination
procedures for the product identified above which was found to comply with the relevant requirements of the Council Directive 96/98/EC of 20
December 1996 as amended.
This certificate will expire on: 19 Feb 2016
For BUREAU VERITAS Notified Body 0062,
At BV NANTES, on 23 Jul 2012,
Joel Gaurin
This certificate does not allow to issue the Declaration of Conformity and to affix the mark of conformity (wheelmark ) to the products corresponding
to this type. To this end, the production-control phase module (D, E or F) of Annex B of the Directive is to be complied with and controlled by a written
inspection agreement with a notified body.
This certificate remains valid until the date stated above, unless cancelled or revoked, provided the conditions indicated in the subsequent page(s) are complied with
and the product remains satisfactory in service. This certificate will not be valid if the applicant makes any changes or modifications to the approved product, which
have not been notified to, and agreed in writing with BUREAU VERITAS. Should the specified regulations or standards be amended during the validity of this
certificate, the product(s) is/are to be re-approved prior to it/they being placed on board vessels to which the amended regulations or standards apply. BUREAU
VERITAS is designated by the French Maritime Authority as a "notified body" under the terms of the French Regulations Division 140 Chapter 140-2. This certificate
is issued within the scope of the General Conditions of BUREAU VERITAS Marine Division available on the internet site www.veristar.com. Any Person not a party
to the contract pursuant to which this document is delivered may not assert a claim against BUREAU VERITAS for any liability arising out of errors or omissions
which may be contained in said document, or for errors of judgement, fault or negligence committed by personnel of the Society or of its Agents in establishment or
issuance of this document, and in connection with any activities for which it may provide.
BV Mod. Ad.E 536 May 2009 This certificate consists of 3 page(s)
Page 2 / 3
Certificate number: 23649/A1 EC
THE SCHEDULE OF APPROVAL
1. PRODUCT DESCRIPTION:
Addressable Multisensor Detector, type ORION+.
Main Characteristics:
Principle: Point Detector using scattered light and / or a thermistor
Smoke Multisensor: 2 Modes - Standard or High Sensitivity
Smoke and Heat combined detection - Classes A1S or A2S or BS
Heat Detector: 1 Mode - Classes A1R or A2R or BR or A1S or A2S or BS
Additional Function: Short circuit isolator function (Tested according to EN 54-17)
Optional relay output (R05) (Tested according to EN 54-18)
Proprietary Protocol DEFNET
Response Threshold Value: Adjustable
Protection Index: IP 22 Indoor
Working Temperature: -10°C to 60°C (For use as a Smoke Detector)
-10°C to 50°C (For use as Class A1 or A2 Heat Detector)
-10°C to 65°C (For use as Class B Heat Detector)
Power Supply: 24 VDC (10 to 30 VDC)
Software Version: 1.1x
Bases E0 (Standard), BRI (Industrial)
2. DOCUMENTS AND DRAWINGS:
- From DEF:
Technical Booklet - Installation and Wiring No. DPAM_NTP_135 Rev. B dated 25/08/2010.
- From FARE:
Drawing No. FA545E Ind. A dated 11/07/07.
3. TEST REPORTS:
3.1 - Issued by CNPP:
Test Reports No. DE 08 00 28 dated 13 Aug. 2008, No. DE 08 00 28A dated 13 Aug. 2008, No. 08 00 28B dated 14 Aug.
2008, No. 0800 28C dated 14 Aug. 2008 and No. 08 00 28D dated 19 Oct. 2009.
3.2 - Issued by EMITECH:
EMC Partial Test Reports No. RC-099-BNC-09-105395-2-A and No. RC-099-BNC-09-105395-3-A both dated 11/01/10
Climatic Test Report No. R022-BNC-09-105394/1/A dated 04/06/06
Mechanical Test Report No. R022-BNC-10-102421/A dated 07/26/10.
4. APPLICATION / LIMITATION:
4.1 - As per Requirements of Regulations stated on the front page of this certificate.
4.2 - The equipment fulfils the EMC requirements for installation on the Bridge and Deck Zone.
4.3 - The equipment is not to be fitted in refrigerated chambers.
4.4 - Prior to fit on board, assessment of compatibility or connectability with fire alarm unit is to be performed.
4.5 - Only Hardware and Software successfully tested together in compliance with the regulations as referred to in page one,
according to the declaration of the manufacturer are covered by this certificate.
5. PRODUCTION SURVEY REQUIREMENTS:
This certificate does not allow the applicant to issue the Declaration of Conformity and to affix the mark of conformity
(wheelmark) to the products corresponding to this type. To this end, the production-control phase module D "Production Quality
Assurance" or E "Product Quality Assurance" or F "Product Verification" of Annex B of the Directive is to be complied with
and controlled by a written inspection agreement with a Notified Body.
6. MARKING OF PRODUCT:
6.1 - Maker's name or trademark,
- Serial number of the units,
- Equipment type number or model identification under which it was type-tested,
- According to EN 54-5/7/17/18.
6.2 - Markings as per MED 96/98/EC:
¤ YYYY/XX where YYYY is the number of the Notified Body undertaking surveillance module (when BV, 0062) and
where XX are the last two digits of year mark affixed.
BV Mod. Ad.E 536 May 2009 This certificate consists of 3 page(s)
Page 3 / 3
Certificate number: 23649/A1 EC
7. OTHERS:
7.1 - This approval is given on the understanding that the Society reserves the right to require check tests to be carried out on the
units at any time and that:
DETECTION ELECTRONIQUE FRANCAISE (DEF)
9 Rue Du Saule Trappu
BP 211
91882 MASSY CEDEX
FRANCE
will accept full responsibility for informing shipbuilders, shipowners or their sub-contractors of the proper methods of use and
general maintenance of the units and the conditions of this approval.
7.2 - This certificate supersedes the Type Approval Certificate N° 23649/A0 EC issued on 19 Feb. 2011 by the Society.
*** END OF CERTIFICATE ***
BV Mod. Ad.E 536 May 2009 This certificate consists of 3 page(s)
