optris PI 640i

TECHNICAL DATA

Thermography Features:
in VGA resolution • 640 x 480 pixels
• Superb thermal sensitivity of 40 mK
• Radiometric video recording with 32 Hz / 125 Hz in subframe mode
• Interchangeable lenses: 15°, 33°, 60° and 90°
• Licence-free analysis software and complete SDK inclusive

Technical specifications
Optical resolution 640 x 480 pixels

Detector FPA, uncooled (17 µm x 17 µm)

Spectral range 8 – 14 µm

Temperature ranges –20 ... 100 °C, 0 ... 250 °C, (20) 150 ... 900 °C1)
optional temperature range: 200 ... 1500 °C
Frame rate 32 Hz / 125 Hz @ 640 x 120 pixels

Optics (FOV) 15° x 11° FOV / f = 41.5 mm or

33° x 25° FOV / f = 18.7 mm or
60° x 45° FOV / f = 10.5 mm or
90° x 66° FOV / f = 7.7 mm

Thermal sensitivity (NETD) 40 mK

Accuracy ±2 °C or ±2 %, whichever is greater

PC interface USB 2.0 / optional USB GigE (PoE) interface

Process interface (PIF), 0 – 10 V input, digital input (max. 24 V), 0 – 10 V output

standard

Process interface (PIF), 2x 0 – 10 V input, digital input (max. 24 V),

industrial 3x 0/4 – 20 mA outputs, 3x relay (0 – 30 V/ 400 mA), fail-safe relay

Cable length (USB) 1 m (standard), 5 m, 10 m, 20 m

5 m and 10 m also as high temperature USB cable (180 or 250 °C)

Ambient temperature 0 ... 50 °C

Storage temperature – 40 ... 85 °C

Relative humidity 20 – 80 %, non-condensing

Enclosure (size / rating) 46 x 56 x 76 – 100 mm (depending on lens + focus position) / IP 67 (NEMA)

Weight 269 - 340 g (depending on lens)

Shock / Vibration 2) IEC 60068-2-27 (25G and 50G) /

IEC 60068-2-6 (sinus shaped), IEC 60068-2-64 (broadband noise)

Tripod mount ¼ - 20 UNC

Power supply via USB

Scope of supply • USB camera with 1 lens

• USB cable (1 m)
• Table tripod
• Standard PIF with cable (1 m) and terminal block
• Software package optris PIX Connect
• Hard transport case
1) Accuracy effective starting at 150 °C
For further information as well as the
product configurator, please visit: 2) For more details see operator‘s manual
www.optris.global/thermal-imager-optris-pi-640

Optris GmbH · Ferdinand-Buisson-Str. 14 · 13127 Berlin · Germany

Phone: +49 30 500 197-0 · Fax: +49 30 500 197-10 · Email: [email protected] · www.optris.global
optris PI 640i

Dimensions
24-29
depending on lens and
46 M4 6 focus position
ca. 15 6 mm deep

ø 14

ø 12
39

ø 42
16
56

33

1/4“ - 20 UNC
6 mm deep 5
52 16.5
Dimensions in mm

Process integration

optris USB Server Gigabit 2.0

Network / Internet
• Network connection via Gigabit Ethernet
24 V DC or
• Full TCP/IP support incl. routing and DNS
Power over Ethernet
• Two independent USB ports
• Power over PoE or external voltage supply
PoE at 24 - 48 V DC
PC • Galvanic isolation 500 VRMS
PIX Connect
• Remotely configurable via web based
management

For further information please visit

www.optris.global/usb-server-gigabit

optris Industrial process interface

5 – 24 V DC
• Use of camera for process monitoring in
industrial environments
• Continuous fail safe monitoring of imager,
software and cable connections
• 3 analog / alarm outputs,
2 analog inputs,

Specifications are subject to change without notice · PI 640i-DS-EN2021-06-A

1 digital input,
3 alarm relay,
1 fail-safe relay

For further information please visit

www.optris.global/neu-industrial-process-interface

Analog OUT / IN optris PI NetBox

Digital IN
8 – 48 V DC Control monitor
PI Process
• Miniature PC as add-on to the PI series
Interface HDMI for stand-alone system
• Integrated hardware and software
USB Keyboard / Mouse watchdog
PIX Connect
• Connections: 2x USB 2.0, 1x USB 3.0,
Network 1x Mini-USB 2.0, Micro-HDMI, Ethernet
GigE PC (Gigabit Ethernet), micro SDHC /
SDXC card

Remote access / setup For further information please visit

www.optris.global/pi-netbox