LUMAWISE Endurance N Enhanced Base

NEMA BASE AC/DC

POWER MANAGEMENT:
JUMP START STREET LIGHTING CONTROL PROJECTS

LUMAWISE Endurance N enhanced base is a lighting control base assembly which provides AC power
switching and DC power supplies necessary for complex control node solutions, creating a platform
to de-risk project schedules and cost of design changes of NEMA/ANSI street and outdoor lighting
control solutions.

LUMAWISE ENDURANCE N ENHANCED

BASE DE-RISKS PROJECT SCHEDULES
AND COST OF DESIGN CHANGES OF
NEMA/ANSI STREET AND OUTDOOR
LIGHTING CONTROL SOLUTIONS. THE
ENHANCED BASE TAKES OUR LIGHTING
CONTROL BASE ASSEMBLY TO THE
NEXT LEVEL OF PERFORMANCE BY
PROVIDING AC POWER SWITCHING
AND DC POWER SUPPLIES

FEATURES: APPLICATIONS:
• Standard NEMA/ANSI Streetlight Interface • Street and roadway lighting control
• Universal AC Input Range • Commercial & campus outdoor lighting management
• Isolated 24V DC Output for ballast control communications • Smart cities control networks
• Isolated 5V and 3.3V DC outputs for customer circuits • Smart grid to smart cities bridging
• Low voltage signal interface to LED light fixture
• Integrated over current and surge protection
• Long life relay with zero-cross switching for AC load control
• Designed for compliance with UL 773, ANSI C136.41
and FCC Title 47 part 15

3 ANSI UL
UL773 compliant
DC output voltages ANSI C136.41 compliance

INDUSTRIAL /// LUMAWISE ENDURANCE N ENHANCED BASE

LUMAWISE Endurance N
ENHANCED BASE
The enhanced base enables cost-effective design reuse through organized DC power and signaling
interfaces. Using the enhanced base as a product platform de-risks project schedules and cost of design
changes. This also lowers certifications and engineering at the same time as well as reducing supply chain
expenses with new project opportunities, all to drive benefit of the bottom line.

SPECIFICATIONS: ENVIRONMENTAL:
• Application: 114-133085 • Operating temperature: -40°C to +85°C
• Product: 108-133085 • Relative humidity:
- Operating: 15% to 96%
MATERIALS: Non-condensing environment
• Housing: PBT • Altitude
• Dimming contacts: Copper alloy gold plated - Operating: -15M to + 2,000M
• Power contacts: Copper alloy tin plated - Non-Operating: -15M to + 14,000M
• Gasket: Vinyl-nitrile foam
• O-Ring: Silicone rubber
• RoHS compliant

ELECTRICAL:
Parameter Value/Note
Input Voltage Range 90-300 VAC for 110/120, 230/240 and 277 VAC nominal sources
Input Frequency 47-63 Hz for 50/60 Hz nominal sources
Maximum AC current 5A based upon the relay ratings
DC Power Supplies
Dimming 24 VDC at 50 mA maximum
Communications 5 VDC at 1000 mA maximum
Auxiliary 3.3 VDC at 500 mA maximum
Surge Protection ANSI C62.41 6 kV, 3 kA combination wave surge protection
Power Consumption <1W @ 120VAC, < 2W @ 277 VAC
Fail Mode* On or Off

*value depends on part number

Product Features
Standoff Pylons
• For mounting control solutions
via M3 or #4 screws

• Available IP-rated cover

• See customer drawing
Multiple Voltage Rails 2306130

Pre-set Zero-cross
Switching
• High performance Population Options • AC power switching
• Long life • Multiple configurations • AC surge protection
without redesign
• 90-300VAC, 43-67Hz
Pre-certification
• UL 773
• ANSI C136.41-2013
• FCC Title 47 part 15 Proven Layout Standard Interface
• Fit & function • Vibration tested • Mating connection to dimming
receptacle (NEMA/ANSI)
• Thermal analysis • Reduced assembly cost
• Proper FELV isolation

INDUSTRIAL /// LUMAWISE ENDURANCE N ENHANCED BASE

LUMAWISE Endurance N
ENHANCED BASE

Efficiency Temperature Derating

Typical
Output Specs 24V 5V 3.3V EMC and Immunity
Output Power 1.2 W 5W 1.65 W Conducted Emissions FCC Title 47, Part 15, Class B
Line Regulation <10% <5% Radiated Emissions FCC Title 47, Part 15, Class B
Load Regulation – 120V, 30C, 10% to 100% 2.5% 5% Harmonic Current EN61000-3-2 Class A
Load Regulation – 277V, 30C, 10% to 100% 2.5% 5% Electrostatic Discharge (ESD) JS-001, IEC 61000-4-2
Temp Regulation – 120V 1.5%
Temp Regulation – 277V 1.5%
Environmental
Transient Response – 120V, 30C <1.5 V <0.5 V
Storage Temperature -40°C to +105°C
Transient Response – 277V, 30C <1.5 V <0.5 V
Operating Temperature -40°C to +85°C (See 114-133085)
Ripple – 120V, 30C 300 mv
Relative Humidity 15% – 96%, Non-condensing
Ripple – 277V, 30C 300 mv
Altitude -15M to 2000M
Hold Up Time – 120V 20 ms
Hold Up Time – 277V 250 ms
Start Up Time 20 ms Switched Load
8A Resistive
Max AC Current 5A Electronic Ballast @ 120V
3A Electronic Ballast @ 277V
Input Specs Typical
Endurance C136.10 Long Life
Source Voltage 90 to 300 VAC
Zero-Cross Switching Yes (See 114-133085)
50hz for x-2314786-x
Source Frequency
60hz for 2314786-x
Inrush Current – 120V 6A
Inrush Current – 277V 13 A
Leakage Current < 2 mA
ANSI C62.41 6kV, 3 kA
Surge Protection
Combination Wave
Standby Power Consumption – 120V 0.7 W
Standby Power Consumption – 277V 1.0 W
Efficiency 60% (120V, 100% load)

INDUSTRIAL /// LUMAWISE ENDURANCE N ENHANCED BASE

LUMAWISE Endurance N
ENHANCED BASE

Product Selection Information

Part Number Description Frequency (Hz) Fail Mode

2314786-1 LUMAWISE Endurance N Enhanced Base 60 ON

2314786-2 LUMAWISE Endurance N Enhanced Base 60 OFF

1-2314786-1 LUMAWISE Endurance N Enhanced Base 50 ON

1-2314786-2 LUMAWISE Endurance N Enhanced Base 50 OFF

Dimensions (mm)
3

Compatible Products
Item Enhanced Base Interface Description Part Number
1 Energy Metering Connection EMC Cable Assembly 2318044-1

2 Luminaire Control Connection LCC Cable Assembly, 7 position 2318043-1

3 Management Power Connection MPC Cable Assembly, 3 position 2318043-2

2213362
4 ANSI C136.41-2013 Interface LUMAWISE Dimming Receptacle
2213627

te.com
© 2020 TE Connectivity. All Rights Reserved.
LUMAWISE, TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be
trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other
representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained
herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties
of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are
subject to change without notice. Consult TE for the latest dimensions and design specifications.
1-1773941-4 AK 09/20 Revised

INDUSTRIAL /// LUMAWISE ENDURANCE N ENHANCED BASE