LAB SESSION 9:
SIMULATE THREE PHASE FULL WAVE CONTROLLED
BRIDGE RECTIFIER ON MATLAB.
Introduction:
Rectifiers are AC to DC converters that produces a rippled DC from which a pure DC can be
obtained using a filter capacitor. A variable input voltage can be obtained by varying the input
voltage. The output is controlled by the firing angle of the thyristors.
Objectives:
To simulate the three-phase rectifier circuit using MATLAB.
Design, Simulation & Observation:
Figure 1
Figure 2 Input voltages vs output voltage
Applications:
Three phase rectifiers are generally employed in industries.
LAB SESSION 10:
SIMULATE THREE PHASE FULL AND HALF WAVE
UNCONTROLLED BRIDGE RECTIFIER ON MATLAB.
Introduction:
Rectifiers are AC to DC converters that produces a rippled DC from which a pure DC can be
obtained using a filter capacitor. A variable input voltage can be obtained by varying the input
voltage. The diodes automatically let the voltage pass as long as the anode voltage is more
positive than cathode.
Objectives:
To simulate the three-phase uncontrolled half and full wave rectifier circuits using
MATLAB.
Design, Simulation & Observation:
Figure 1(Half wave)
The following output is observed.
Figure 2
Figure 3 (Full wave)
The following output is observed.
Figure 3 Input voltages vs output voltage
Applications:
Three phase rectifiers are generally employed in industries.
