Vidyamandir Classes: Innovating For Your Success

SUBJECT II : PHYSICS 100 MARKS

SECTION-1
This section contains 20 Multiple Choice Questions. Each question has 4 choices (A), (B), (C) and (D), out of which
ONLY ONE CHOICE is correct

1. A uniform rope of mass m hangs freely from a ceiling. A monkey of mass M climbs up the rope with an
acceleration a. The force exerted by the rope on the ceiling is:

(A) Ma + mg
(B) M(a + g) + mg
(C) M(a + g)
(D) Dependent on the position of monkey on the rope
2. Initially, the system is at rest. Find out maximum value of F for which the blocks move together. [Take
g = 10 m /s 2 ]

(A) 200 N (B) 150 N (C) 100 N (D) 50 N

3. The system shown in the given figure is in equilibrium. All the blocks are of the equal mass m and
springs are ideal. When the string between A and B is cut then immediately after that:

(A) The acceleration of block A is 2 g while the acceleration of block C is g

(B) The acceleration of block B is 2 g while the acceleration of block C is zero
(C) The acceleration of block A is 2 g while the acceleration of block B is g
(D) The acceleration of block B is g while the acceleration of block C is zero
4. A particle of mass m is tied to a massless string and the other end of the string is fixed at a point. Now,
the particle is allowed to move in a circular path in the horizontal plane at a constant angular velocity
such that the string makes a constant angle  with the vertical. The tension in the string is:
mg mg
(A) mg cos  (B) mg sin  cos  (C) (D)
cos  sin  cos 

Page 2 | PLT Batch B1 & B4 VP Online JEE Mains-4 Class XI | JEE 2023
 Vidyamandir Classes: Innovating For Your Success

A block of mass 0.5 kg is placed on a fixed plane inclined at an angle  = sin ( 0.6 ) with the horizontal.
−1
5.

The coefficient of friction between the block and the plane is 0.5. The block starts moving down the
inclined plane, starting from rest. The velocity of the block after it has moved a distance 1m
is: ( g = 10 m/s2 )

(A) 1 m/s (B) 1.5 m/s (C) 1.8 m/s (D) 2 m/s
6. Two blocks of masses m1 and m2 are arranged with an ideal pulley and a massless string as shown, with
the block of mass m1 on a rough horizontal table. The required coefficient of friction between the block
and the table such that the blocks can move with constant velocity is:

m1 m2 m1 m1 − m2
(A) (B) (C) 1− (D)
m2 m1 m2 m1 + m2
7. A block is suspended vertically by an ideal spring as shown, and the upper end of the spring is fixed. The
block is released from rest when the spring is in its natural length. The graph that correctly depicts the
acceleration of the block (a) as a function of the distance it has moved (x) until it comes to rest again is:
(The vertically upward direction is taken positive)

(A) (B)

(C) (D)

8. A uniform rope of mass m is tied to a block of mass M and a constant force F is exerted on the rope in
the vertically upward direction as shown. The force that the rope exerts on the block, if both move
upwards with constant acceleration is:

Page 3 | PLT Batch B1 & B4 VP Online JEE Mains-4 Class XI | JEE 2023
 Vidyamandir Classes: Innovating For Your Success

 M   M  M  M 
(A)  F (B) Mg +   F (C)   F (D) Mg +   F
M +m  M +m m m
9. A block of mass 1 kg just remains in equilibrium with the vertical wall of a cart accelerating uniformly
with 20 m / s 2 as shown. The co-efficient of friction between block and wall is (g = 10 m / s 2 )

(A) 0.1 (B) 0.2 (C) 0.5 (D) 1

10. A particle is moving in the X-Y plane. Its momentum as a function of time is given
by: p ( t ) = A cos ( t ) iˆ + B sin ( t ) ˆj . Here A, B and  are constants. The net force acting on the particle is
given by:
(A) F = − A sin ( t ) iˆ + B cos ( t ) ˆj (B) F = A sin ( t ) iˆ − B cos ( t ) ˆj
(C) F = − A cos ( t ) iˆ + B sin ( t ) ˆj (D) F = A cos ( t ) iˆ − B sin ( t ) ˆj
11. A stone of mass 1.5 kg is tied at the end of 0.5 m long string and whirled in a vertical circular path at
constant speed of 2 ms –1 . The maximum tension in the string is (g = 10 ms –2 )
(A) 27 N (B) 3N (C) 90 N (D) 15 N
12. A block of mass 4 kg is placed on a rough surface and is being acted upon by a time dependent force
F = 4t 2 ( N ) (where t is in second). The co-efficient of friction between the block and horizontal surface

is  = 0.4 . Then velocity of block at t = 5s is:

(A) 27 m / s (B) 50 m / s (C) 22.5 m / s (D) 20 m / s

13. A block of mass m is placed on the top of another block of mass M as shown in the figure. The
coefficient of friction between them is  . The maximum acceleration with which the block M may move
so that m also moves along with it is

(A) g (B) g / (C) 2 / g (D) g / 2

Page 4 | PLT Batch B1 & B4 VP Online JEE Mains-4 Class XI | JEE 2023
 Vidyamandir Classes: Innovating For Your Success

14. A block of mass 1 kg is at rest relative to a smooth wedge moving leftwards with constant acceleration

a = 5m / s 2 . Let N be the normal reaction between the block and the wedge. Then ( g = 10 m / s )
2

(A) N = 5 5N (B) N = 15 N (C) tan  = 1 (D) tan  = 2

15. Two blocks A (1kg ) and B ( 3 kg ) are connected by a string passing over a smooth pulley as shown. B
rests on rough horizontal surface and A rest on B. The co-efficient of friction between A and B is the
same as that between B and the horizontal surface. The minimum horizontal force F required to move

(
A to the left is 24 N . The co-efficient of friction is g = 10m / s 2 )

(A) 0.67 (B) 0.5 (C) 0.4 (D) 0.25

16. A uniform rope of length l lies on a table. If the coefficient of friction is , then the maximum length l '
of the part of this rope which can overhang from the edge of the table without sliding down is
l l l l
(A) (B) (C) (D)
  +1  +1  −1
17. The ratio of T1 and T2 is (see figure) (neglect friction)

(A) 3:2 (B) 1: 3 (C) 1: 5 (D) 5 :1

18. A box of mass 8kg is placed on a rough inclined plane of inclination . Its downward motion can be
prevented by applying an upward pull F and it can be made to slide upwards by applying a force 2 F .
The coefficient of friction between the box and the inclined plane is
1 1
(A) tan  (B) 3tan  (C) tan  (D) 2 tan 
3 2
19. A particle of mass 0.1 kg is whirled at the end of a string in a vertical circle of radius 1.0 m at a constant

(
speed of 5 m / s. The tension in the string at the highest point of its path is g = 10m / s 2 )
(A) 0.5N (B) 1.0 N (C) 1.5N (D) 2.0N

Page 5 | PLT Batch B1 & B4 VP Online JEE Mains-4 Class XI | JEE 2023
 Vidyamandir Classes: Innovating For Your Success
20. A block of mass 20kg is balanced by three strings A, B & C as shown in figure. Ratio of tensions in
string A and B (TA / TB ) is

5 5 3 5 8
(A) (B) (C) (D)
8 8 6 5

Section II
Section 2 contains 5 Numerical Value Type Questions. The answer to each question is a NUMERICAL VALUE. For each
question, enter the correct numerical value of the answer. If the answer is a decimal numerical value, then round-off the
value to TWO decimal places. If the answer is an Integer value, then do not add zero in the decimal places. Do not bubble
the + sign for positive values. However, for negative values, - sign should be bubbled. (Example: 6, 81, 1.50, 3.25, 0.08)

21. Two blocks of mass m1 = 600 g and m2 = 400 g are suspended using a massless string and an ideal
pulley such that they are at the same horizontal level, and released from rest with the string being tight.
The difference in height of the blocks 1 second after the start is __________m. ( g = 10 m/s2 )

22. A box is dropped on a conveyor belt moving at 3 m/sec. If the coefficient of friction between the belt and
the box is 0.6, the displacement of the box relative to the conveyor belt before slipping between the two
W
is stopped m . Find W.
100

23. Two forces F1 and F2 of magnitude 10N and 5N respectively are acting on a block of mass 2 kg
resting on a rough horizontal surface. The coefficient of friction between block and surface is 0.3. Find
3
the acceleration of block (in m / s 2 )? (tan 37 = , g = 10ms −2 )
4

Page 6 | PLT Batch B1 & B4 VP Online JEE Mains-4 Class XI | JEE 2023
 Vidyamandir Classes: Innovating For Your Success
1
24. Block A moves upward with acceleration m/ s 2 . Find the acceleration of block B (in m / s 2 ) in
2
downward direction?

25. Two blocks of masses 5 kg and 2 kg are connected by a massless string as shown in figure. A vertical

(
force F is applied on the 5kg block. Find the value of F if tension in the string is 40N . g = 10m / s 2 )

Page 7 | PLT Batch B1 & B4 VP Online JEE Mains-4 Class XI | JEE 2023