Scribd
Upload
17 views5 pages

MTCNA Soal

The document discusses user account configuration options on a PPP server including allowing multiple logins, limiting connection types, setting data transfer limits, and restricting services. It also lists the layers of the TCP/IP model and asks which ones are transport, internet, and data link layers. Finally, it provides sample exam questions and answers.

Uploaded by

febri fatkhurochim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
17 views5 pages

MTCNA Soal

The document discusses user account configuration options on a PPP server including allowing multiple logins, limiting connection types, setting data transfer limits, and restricting services. It also lists the layers of the TCP/IP model and asks which ones are transport, internet, and data link layers. Finally, it provides sample exam questions and answers.

Uploaded by

febri fatkhurochim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

1.

For user in local PPP Secrets/PPP Profiles database, it is possible to


A . Allow/deny use of more than one login by this user
B . Allow login by PPPoE and PPTP, but deny login by L2TP
C . Set max values for transferred data (Rx/Tx)
D . Allow only PPPoE login
E . Deny services (like telnet) only for this user or for one group of users

2. Which of the following are layers in the TCP/IP model?

Application

Session

Transport

Internet

Data Link

Physical

A . 1 and 2
B . 1, 3 and 4
C . 2, 3 and 5
D . 3, 4 and 5
Jwb : B

January 19, 2021examsLeave a comment

Post navigation
What does this simple queue do (check the image)?
A . Queue guarantees upload data rate of one megabit per second for host 192.168.1.10
B . Queue limits host 192.168.1.10 download data rate to one megabit per second.
C . Queue limits host 192.168.1.10 upload data rate to one megabit per second.
D . Queue guarantees download data rate of one megabit per second for host 192.168.1.10

Is it possible to limit how many clients are able to connect to an access point?
A . No it’s not possible at all
B . Yes, but only with access-lists
C . Yes

How long is level 1 (demo) license valid?


A . 24 hours
B . Infinite time
C . 1 month
D . 1 year

Which of the following is used in standard 802.11 wireless networks?


A . CSMA/CA
B . CDMA
C . FDD
D . CSMA/CD

Which command is used to determine if an IP access list is enabled on a particular interface?


A . show access-lists
B . show interface
C . show ip interface
D . show interface access-lists
It is required to make a web server on a private LAN visible on the Public Internet. Only the web
server port should be visible to the public.

Which of the following configuration steps must be met? (select all that apply)
A . Public IP address of the webserver must be installed on the NAT Router
B . in ip firewall NAT there should be a dst-nat between the public ip of the router and the
private ip of the webserver
C . Connection Tracking must be enabled on NAT router
D . A route between the NAT Router and the webserver must exist
E . LAN address of the webserver should be routable on the internet

Which computers would be able to communicate directly (without any routers involved):
A . 192.168.17.15/29 and 192.168.17.20/28
B . 10.5.5.1/24 and 10.5.5.100/25
C . 10.10.0.17/22 and 10.10.1.30/23
D . 192.168.0.5/26 and 192.168.0.100

A network ready device is directly connected to a MikroTik Router BOARD 750 with a correct U.T.P.
RJ45 functioning cable. The device is configured with an IPv4 address of 192.168.100.70 using a
subnet mask of 255.255.255.252.

What will be a valid IPv4 address for the Router BOARD 750 for a successful connection to the
device?
A . 192.168.100.69/255.255.255.252
B . 192.168.100.70/255.255.255.252
C . 192.168.100.71/255.255.255.252
D . 192.168.100.68/255.255.255.252

Which layer 4 protocol is used for a Telnet connection?


A . IP
B . TCP
C . TCP/IP
D . UDP

There are two wireless cards (wlan1 and wlan2) which are bridged together. On wlan1 card there is a
setting "Forwarding=no". Choose the correct answer(s):
A . Stations on wlan2 will be able to communicate with stations on wlan2
B . Stations on wlan2 will be able to communicate with stations on wlan1
C . Stations on wlan1 will be able to communicate with stations on wlan1
D . To prevent communication between wlan1 and wlan2 one cannot use Bridge Filters
E . Stations on wlan1 will be able to communicate with stations on wlan2
Which type of encryption could be used to establish a connection with a simple passkey without using
a 802.1X authentication server?
A . WPA PSK/WPA2 PSK
B . WPA EAP/WPA2 EAP

Which one of the following is true regarding VLANs?


A . Two VLANs are configured by default on all Cisco switches.
B . VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are
allowed.
C . You should not have more than 10 switches in the same VTP domain.
D . VTP is used to send VLAN information to switches in a configured VTP domain.

Where is a hub specified in the OSI model?


A . Session layer
B . Physical layer
C . Data Link layer
D . Application layer

A client that has successfully connected to a wireless network is considered to be which of the
following? Choose all that apply:
A . Authenticated
B . Associated
C . Unauthenticated
D . Unassociated

Which class of IP address has the most host addresses available by default?
A.A
B.B
C.C
D . A and B

Where can you monitor (see addresses and ports) real-time connections which are

processed by the router?


A . Firewall Connection Tracking
B . Firewall Counters
C . Tool Torch
D . Queue Tree
Which of these are possible solutions to bridge two networks over a wireless link:
A . Both devices in AP mode and enable WDS mode
B . One device in AP mode, another one in station-pseudobridge-clone
C . One device in AP mode, another one in station-pseudobridge
D . One device in AP mode, another one in station
What does the command routerA(config)#line cons 0 allow you to perform next?
A . Set the Telnet password.
B . Shut down the router.
C . Set your console password.
D . Disable console connections.

You might also like