Scribd
Upload
171 views5 pages

Rms Quality AS9102C Form Template 012024

Uploaded by

karla.ysabido
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
171 views5 pages

Rms Quality AS9102C Form Template 012024

Uploaded by

karla.ysabido
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 5

To navigate to each form, press the buttons below or

press the worksheet tab

FORM 1 FORM 2 FORM 3

RMS FAI Supplier Quality Guidelines


**Refer to RMS FAI Supplier Quality Guidelines for Proper Form Completion**

Sheet of

AS9102C First Article Inspection Report


Form 1: Part Number Accountability
1. Part Number: 2. Part Name: 3. Serial Number: 4. FAIR Identifier:

5. Part Revision Level: 6. Drawing Number: 7. Drawing Revision Level: 8. Additional Changes:

9. Manufacturing Process Ref.: 10. Organization Name: 11. Supplier Code: 12. Purchase Order Number:

13. (Check One option): 14. (Check One Option): Full FAI Partial FAI
Detail
Baseline Part Number (including revision level):

Assembly Reason for Full / Partial FAI:

a) if above part is a detail part only, go to Field 19


b) if above part number is an assembly, go to the "INDEX" section below.
INDEX of part numbers or sub-assembly numbers required to make the assembly noted above.
15. Part Number: 16. Part Name: 17. Part Type 18. FAIR Identifier:

19. Does FAIR Contain a Documented Nonconformance(s)? Yes No

20. FAIR Verified


21. Date:
By:

22. FAIR Reviewed/Approved By: 23. Date:

24. Customer Approval: 25. Date:

26. Comments
**Refer to RMS FAI Supplier Quality Guidelines for Proper Form Completion**

Sheet of

AS9102C First Article Inspection Report


Form 2: Product Accountability - Raw Material, Specifications and Special Process(es) and Functional Testing
1. Part Number: 2. Part Name: 3. Serial Number: 4. FAIR Identifier:

9. Customer
6. Specification 10. Certification of
5. Material or Process Name: 7. Code: 8. Supplier: Approval
Number: Conformance Number:
Verification:

11. Functional Test Procedure Number: 12. Acceptance Report Number:


**Refer to RMS FAI Supplier Quality Guidelines for Proper Form Completion**

13. Comments:
**Refer to RMS FAI Supplier Quality Guidelines for Proper Form Completion**

Sheet of
AS9102C First Article Inspection Report
Form 3: Characteristic Accountability, Verification and Compatibility Evaluation
1. Part Number: 2. Part Name: 3. Serial Number 4. FAIR Identifier:

Characteristic Accountability Inspection / Test Results


10.
11.
5. Char. 6. Reference 7. Characteristic Designed /
8. Requirement: 9. Results: Noncorformance 12. Additional Data / Comments
Number: Location: Designator: Qualified
Number
Tooling

You might also like