Válv. Cameron Demco

DEMCO Gate Valves
Dependability, in-line repairability, flexible trim options and drop-tight, position shutoff
1
Table of Contents
DEMCO GATE VALVES

Introduction........................................................................................... 2
Series DM Gate Valves........................................................................... 3
Series DM 1000 to 5000 psi Gate Valves................................................ 4
Series DM 7500 psi Gate Valves............................................................. 5
Series DT/DB Gate Valves....................................................................... 7
Enhanced Oil Recovery Accessories........................................................ 9
Product Specifications
General Technical Information........................................................... 10
Dimensions and Materials/Parts List
Series DM 7500 Gate Valves – 7500 psi WP...................................... 12
Series DM Gate Valves – 2000, 3000, and 5000 psi WP.................... 22
Series DM Gate Valves – ASME Classes 400 and 600........................ 34
Series DM Gate Valves – ASME Classes 900 and 1500...................... 38
Series DT Gate Valves – ASME Classes 600, 900, and 1500............... 42
CAMSERV Aftermarket Services for Valves and Actuation....................... 52
Trademark Information.......................................................................... 53
1
DEMCO Gate Valves
Oklahoma City,
Okla., USA
Cameron is a leading provider of valves, valve automation, and measurement systems

to the oil and gas industry. Our products are primarily used to control, direct, and
measure the flow of oil and gas as it is moved to refineries, petrochemical plants, and
industrial centers for processing.
We provide valve products that are sold through distributor networks worldwide for
use in both oil and gas and industrial applications and include such widely recognized
brands as DEMCO®, NAVCO®, NEWCO®, NUTRON®, THORNHILL CRAVER®, TECHNO™,
TOM WHEATLEY®, WHEATLEY®, and WKM®.
Cameron’s DEMCO gate valves are the valves of choice, engineered and proven for
drilling and production industries. Designed for dependable, heavy-duty performance
in abrasive and corrosive service conditions, DEMCO gate valves are commonly
selected for a number of oilfield applications.
2
SERIES DM GATE VALVES
Cameron’s DEMCO Series DM gate valves, the premier gate valve in the oil and gas drilling market, are specifically engineered
for the rigorous requirements of oilfield applications. Designed for dependable, heavy-duty performance in abrasive service
conditions, DEMCO DM gate valves are commonly selected for a number of oilfield applications, including:
• Drilling standpipe manifold

• Pump manifold block valves
• High-pressure mud mixing lines
• High-pressure drilling system block valves
The DEMCO Series DM gate valves are available in ASME Classes 400, 600, 900, and 1500. They also are available in API
working pressures 2000, 3000, and 5000 psig (not API monogrammed).
Features and Benefits

In-Line Field Repairability
The bonnet is easily removed for internal parts inspection and/or
replacement without removing the valve from the line. This
design simplicity permits fast and easy service without the need
for special tools. A
Flexible Trim Offerings

Optional materials for stems, gates, seat inserts and seat
elastomers make it easier to trim valves for a wide range of
service conditions. Three internal plastic coatings for the body
and bonnet are offered to improve resistance to wear and
corrosion.
Double Acting Thread Design

for Fast Operation F
A. The ASME series double acting thread design contains a
threaded stem in the gate working with threads in the
bonnet and handle assembly. Stems are polished and include
a dependable O-ring and anti-extrusion seal. This unique
design is economical and effective. Note: the 4” (100 mm)
ASME Class 1500 valve is a double acting, rising stem design,
similar to the 4” (100 mm) 3000 psi valve.
B. The DM 2000, 3000, and 5000 psig working pressure valves
contain double acting threads working together in a specially E
designed stem screw, screw housing, and stem arrangement.
Note: the 4” (100 mm) and larger 5000 psi valve is a single-
thread, heavy-duty, rising stem design with bearings.
C. The rising stem design protects the stem threads from
the lading. Series DM 3” (80 mm) ASME 900/1500
D. Larger DM 3000 and 5000 psi gate valves include a sight lens Gate Valve
to view the stem for determining gate position.
3
SERIES DM 1000 TO 5000 PSI GATE VALVES
Exclusive Seat Design for Drop-Tight Sealing
The DEMCO Series DM gate valve seat uses a unique design D
to provide a drop-tight shutoff in abrasive and erosive service.
E. The seat consists of two identical metal wear rings

encapsulated in elastomer to form a cylindrical shape with
a gate slot and two round ports. The closed gate bears on
the downstream wear ring, while the elastomer provides
a drop-tight pressure-responsive seal around the port.
F. The cylindrical seat assembly fits into the machined body C
cavity and is expanded outward toward the valve ports by B
the bonnet and spread ring in the bottom of the seat. The
expansion occurs when the bonnet is tightened onto the
body while engaging the seat pin extensions from both
wear rings. The spread ring ensures the seat elastomer
presses uniformly against the body bore. This design
ensures the seat seals tight against the body and around
each valve port. This design has proven to be effective
even if the gate and seat ring become scored or abraded
during service. When it comes time for maintenance, the
seat’s single-piece design makes it easy to pull out of the F
body for replacement.
Series DM 4” (100 mm) 5000 WP

Gate Valve (Four-Bolt Design Shown)
For proper valve repair, use Cameron’s DEMCO replacement parts.
4
SERIES DM 7500 PSI GATE VALVES
The bonnet is easily removed for internal parts inspection and/or replacement without removing the valve from the line. This
design simplicity permits fast and easy service without the need for special tools.
Heavy-Duty Roller Bearings

Heavy-duty stem roller bearings reduce torque on 4” (100 mm) and larger valves.
Floating Slab Gate Design

A slab gate with a “T” slot stem connection allows the gate to float to the seat, providing a tighter pressure-responsive seal.
A. Unique, abrasion resistant, one-piece seat design

The seat assembly consists of two stainless steel insert/ E
support rings to which a resilient elastomer is

permanently bonded. The elastomer provides tight
D
shutoff after long use in abrasive service. The stainless
steel rings are corrosion and erosion resistant. The
one-piece design makes field replacement easier.
B. Locking seat alignment
The seat assembly is engineered with a metal lock shell
that aligns the seat in the bottom of the valve. This
design ensures accurate seat alignment with reduced
resistance to flow.
F
C. Body wear rings
Surface hardened alloy body wear rings back up both
sides of the seat. These rings extend the service life of
G
the valve by absorbing erosive wear that can cause
damage to the body around the seat bore area.
C
C C
A B
5
D. Rising stem design F. Replaceable stem packing
The DEMCO DM 7500 gate valve uses a rising stem The stem packing can be replaced without removing the
design that isolates and protects the threads from the bonnet from the valve, 3” to 6” (80 mm to 150 mm),
line medium. The rising stem also indicates saving time when this maintenance may be required.
gate position. Note: line and valve pressure must be relieved before
E. Visual position indicator lens performing this maintenance.
On 3” (80 mm) and larger valves, a clear position G. Flow cleansed design
indicator lens allows the operator to easily determine The body cavity area is designed to allow continuous
whether the valve is open or closed. The indicator lens flushing by the fluid flow. This action prevents the valve
also helps to protect the stem threads from from sanding up, even in standpipe installations.
the elements.
DM Series Pressure Classes and Sizes

Size in. (mm) 400 600 900 1500 1000 2000 3000 5000 7500*
FP 1-1/2 (40) •
FP 2 (50) • • • • • • • •
FP 2-1/2 (65) • • • • • •
FP 3 (80) • • • • • • • •
FP 4 (100) • • • • • • • •
FP 5 (125) • • • •
FP 6 (150) • • •
RP 2 x 1-1/2 (50 x 40) •
RP 2-1/2 x 2 (65 x 50) • • •
RP 3x2 (80 x 50) • •
RP 4x3 (100 x 80) • • •
RP 5x4 (125 x 100) • • •
RP 6x4 (150 x 100) •
RP 6x5 (150 x 125) • •
RP 8x6 (200 x 150) •
* Other weld connections are available. Consult Cameron for information.
6
SERIES DT/DB GATE VALVES
Cameron’s DEMCO Series DT/DB gate valves are recognized for their quality design, rugged dependability, and corrosion
resistance, particularly for use in waterflood and CO2 applications.
DEMCO aluminum bronze and stainless steel valves and accessories are designed specifically for the demanding requirements
of corrosive CO2 injection and waterflood applications in the enhanced oil recovery market.
• The handle moves up and down on the bonnet, or the top of the stem is visible during operation, providing visible aid to
determine whether the valve is open or closed.
Seat Spring
Stem Threads Isolated From Line Media Seat Seal
Four-Ring Packing Set SEAT ASSEMBLY DETAIL

P-10
(SEAT/SEAL OPTION 6)
SEAT SPRING AND SEAL
PART OF SEAT ASSEMBLY
Full Through-Conduit Design Seat Seal
SEAT ASSEMBLY DETAIL

PEROXIDE-CURED BUNA-N
OR FKM
(SEAT/SEAL OPTION 1 OR 2)
SEAT SEAL PART OF SEAT
ASSEMBLY
DT and DB Series Pressure Classes and Sizes

SEE PAGES 36 THROUGH 43 FOR DT Series Threaded and Flanged
MATERIAL SPECIFICATIONS ASME Class ASME Class ASME Class
Size in. (mm) 600 900 1500
Optional Materials:
FP 2 (50) • • •
DT Series: FP 2-1/2 (65) • • •
• SS Body and Bonnet, FP 3 (80) • • •
FKM or P-10 Seats FP 4 (100) (Flanged Only) • • •
FP 6 (150) (Flanged Only) •
DB Series:
DB Series Valves (Consult Cameron for Drawings)
• FKM Seat Elastomer
FP 6 (150) • • •
• Peroxide-Cured Buna-N
RP 6x4 (150 x 100) • • •
RP 8x6 (200 x 150) • •
7
The bonnet is easily removed for internal parts inspection
and/or replacement without removing the valve from the
line. This design simplicity permits fast and easy service
without the need for special tools.
Corrosion-Resistant Materials are Standard

Body and bonnet materials, as well as all internal wetted E
parts, comply with NACE RP-0475.
Rising Stem Design

The handle moves up and down on the bonnet, or the top
of the stem is visible during operation, providing visible aid
to determine whether the valve is open or closed.
A. Pressure-responsive drop-tight sealing C
Standard seats consist of 316 SS seat rings encapsulated

with 90 durometer, peroxide-cured Buna-N elastomer to
provide reliable, drop-tight sealing for extended
service life.
B. Superior abrasion resistance
Buna-N elastomer encapsulated seats also provide an A
excellent deterrent to abrasion, further enhancing

extended service life.
C. Four-ring stem packing set
The DEMCO Series DT stem seal design uses four
packing rings, preventing leakage into the stem journal
and outside the valve.
D. Through-conduit gate design B D
Full through-conduit design ensures non-turbulent flow

and gate alignment for improved valve performance and
longer service life.
E. Non-wetted stem thread design
Series DT Gate Valves
The DEMCO stem design isolates corrosive lading from
contacting stem threads, preventing stem seizure and
ensuring long, trouble-free valve performance.
For proper valve repair, use Cameron’s DEMCO replacement parts.
8
Series DB Gate Valve
The DEMCO Series DB gate valve is available for the large
G
6” (150 mm) and 8” (200 mm) pipe sizes in the enhanced oil
recovery market. These valves also feature an aluminum
bronze body and bonnet as standard. Internal parts are 316
SS. The exclusive seat design of the DEMCO Series DB gate
valve is the same proven design found in the DEMCO Series
DM gate valve. The seat consists of two identical metal wear
rings encapsulated in elastomer to form a cylindrical shape
with a gate slot and two round ports. The closed gate bears
down on the downstream wear ring, while the elastomer
provides a drop-tight pressure-responsive seal around the
port. This design provides an effective seal even if the gate
and seat ring become scored or abraded during service. The
DEMCO Series DB gate valve also is field repairable while the
valve is in-line.
ENHANCED OIL RECOVERY ACCESSORIES

Flow Tees
Accessories
Ball check valves, flow tees, and strainers are available to
complete requirements for an entire injection assembly.
F. Ball Check Valves

G. Flow Tees
H. Strainers
F H
Ball Check Valves Strainers
9
Product Specifications
SERIES DM, DT, AND DB GATE VALVES
GENERAL TECHNICAL INFORMATION
Valve Size Designations and Weld End Dimensional Information

1. All references to pipe size in this catalog are the nominal size.
The actual OD and ID for various nominal sizes and schedules are tabulated below.
Weld end bodies are machined at each end to match the pipe OD and ID.
Nominal Size ID
in. (mm) OD Sch 40 Sch 80 Sch 160 XXH

1-1/2 (40) 1.900 1.610 1.500 - -
2 (50) 2.375 2.067 1.939 1.687 1.503
2-1/2 (65) 2.875 2.469 2.323 2.125 1.771
3 (80) 3.500 3.068 2.900 2.624 2.300
4 (100) 4.500 4.026 3.826 3.438 3.152
5 (125) 5.563 - 4.813 4.313 4.063
6 (150) 6.625 6.065 5.761 5.187 4.897
2. Reduced port valve size descriptions are designated by two numbers.

The first number is the nominal size of the end connection.
The second number is the ID of the valve seat (dimension “C” in the tables).
PRESSURE RATINGS
DEMCO gate valves are designed for the maximum working pressures and test pressures tabulated below.
1000 2000 3000 5000 7500
ASME Class ASME Class ASME Class ASME Class
400 600 900 1500 WP WP WP WP WP
990 WP 1480 WP 2220 WP 3705 WP 1000 WP 2000 WP 3000 WP 5000 WP 7500 WP
1500 Test 2225 Test 3350 Test 5575 Test 2000 Test 4000 Test 6000 Test 7500 Test 11,250 Test
Gate valve rating must be selected to match the piping system in which the valve will be installed. Tabulated below are
working pressures at 100º F (38º C) for ASTM A106 Grade B and AISI 4130 60K minimum yield pipe in sizes corresponding to
DEMCO gate valves.
Size ASTM A106 Grade B 4130 60k Min. Yield
in. (mm) Sch 40 Sch 80 Sch 160 XXH XXH
1-1/2 (40) 1340 2430 - - -
2 (50) 1210 2220 4300 5970 10,234
2-1/2 (65) 1620 2590 3950 6590 -
3 (80) 1460 2370 3930 5880 10,080
4 (100) 1300 2130 3830 5150 8826
5 (125) - 1970 3730 4650 7971
6 (150) 1110 1970 3650 4724 8098
8 (200) 1030 1790 - - -
10
Quality, Inspections and Testing
• Cameron’s quality system is based on ISO 9000 and API Q1 requirements and is ISO 9001:2008 certified. Cameron’s Quality
department monitors all phases of valve production, from material receipt to final inspection, including a liaison with third-party
inspectors and certifying authorities.
All DEMCO gate valves are hydrostatically tested; stem seal, body and seat are inspected for zero leakage under pressure before
being released for shipment. Hydrotest specifications are based upon API 6A latest edition testing requirements; DEMCO Series DM
7500 group 2 and 3 valves undergo additional test cycles, including low-pressure seat tests prior to being released for shipment.
Certifications
• DEMCO DM 5000 Gate Valves 2” to 5” are available with ABS Type approval upon request.
• DEMCO DM 7500 Gate Valves 2” to 5” are available with ABS or DNV Type approval upon request.
Seat Seal Options

• Buna-N (Nitrile)
Is excellent for petroleum oil and gases, fuel oils, and alcohols from -10° F to 200° F (-23° C to 93° C).
• FKM
Highly resistant to mineral acids and hydrocarbons and resists moderate concentrations of H2S. Serviceable from -10° F to 400° F
(-23° C to 204° C). (Not suitable for steam.)
• HNBR
Formulated for use with synthetic and oil-based drilling mud service from -20° F to 250° F (-29° C to 121° C).
Coatings – DM Gate Valves Only

• DEMCO 12
A baked-on phenolic epoxy, tougher and more abrasion resistant. Excellent for service in caustics and saltwater up to 200° F (93° C).
• ENDURO-BOND™
An engineered dry powder coating process for metal surfaces that provides a protective barrier against corrosion and abrasive
wear. Coating thickness is from 1 to 4 mil; is superior to plastics, epoxies and ceramics; and has a high heat resistance to 800º F
(427º C).
Ordering Information
• Give size, pressure class, and end connection.
• Specify pressure class of flanged ends, raised face (RF), or ring type joint (RTJ).
• For threaded ends, provide type of pipe:
TBG (non-upset tubing) LCSG (long casing thread)
UPTBG (external upset tubing) CSG (short casing thread)
• For weld ends, give schedule of mating pipe.
• For applications in high-pressure gas above 3000 psi or involving concentrations of H2S or CO2, consult Cameron for
recommendations.
11
Dimensions and Materials/Parts List
SERIES DM 7500 GATE VALVES – 7500 PSI WP
2” (50 mm) XXH with 1-1/2” Bore for General Service Conditions
14.00 (356) DIA

1
2
22
7 23
6
24
11 25
BRONZE BUSHING 13.04 (331)

8 26 (Open)
FLAT TOP FOLLOWER 10
12 16
FABRIC REINFORCED SEAL RING
9
HOMOGENEOUS RUBBER SEAL RING
18
FLAT BOTTOM ADAPTER

13
2.63 (67)
20 15 14 21 19
A
Dimensional Data and Weights

Valve Size: 2” (50 mm) RP
Dimension
7500 WP
A Weld End 9.00 (229)
Valve Seat ID 1.50 (38)
Number of Handle Turns from Open to Closed 7.00
Weight lb (kg)
Weld End 76 (34)
12
ASSEMBLY PART NUMBER
Group 1 Basic valve. Hydrostatic shell test: 11,250 psi for three minutes. Hydrostatic seat test: 7500 psi for three minutes, each side. Material
traceability on body and bonnet.
Group 2 Same as Group 1, except: Hydrostatic shell test: 11,250 psi for three minutes, drop to 0 psi, then 11,250 psi for 15 minutes. Test is
charted. Hydrostatic seat test: 7500 psi for three minutes, drop to 0 psi, 7500 for 15 minutes, drop to 0 psi, then 300 psi for five
minutes, each side. Test is charted. Material traceability on body, bonnet, stem, and bolting. Impact tests at or below -50° F (-46° C)
on body, bonnet, stem and bolting. Surface NDE on body, bonnet and stem.
Group 3 Same as Group 2, plus volumetric NDE on body and bonnet.
Parts List
Key Valve Size: 2” (50 mm) FP
No. Qty. Description Group 1 Group 2 Group 3
Assembly Base Number Weld End J025196 J025197
1 1 Lube Fitting Steel J005195
2 1 Handle Ductile Iron ASTM A536 Grade 65-45-12 2139712-01
4 1 Lock Handle AISI C-1213 J001891
n 6 1 Stem Screw AISI C-1213 J001913
n 7 1 Housing Seal Buna-N J005526-224
8 1 Screw Housing ASTM A350 Grade LF2 Class 1 J024982
n 9 1 Stem 410 SS J024983-107
n 10 1 Secondary Seal HNBR 2712425-13
FKM J005531-210
11 1 Packing Retainer AISI C-1213 J001940 -
17-4 PH SS - J021432
n 12 1 Stem Seal Assembly HNBR J023231-008
(With Bronze Bushing – ASTM B505 Alloy 93200) FKM J023231-006
n • 13 1 Gate Clip AISI 302 SS M450480
n • 14 2 Body Wear Ring For Steel Gate, AISI 4140 w/QPQ Nitride Coating 2269414-01
For SS Gate, AISI 410 Stainless Steel Consult Cameron
n • 15 2 Wear Ring Seal HNBR Consult Cameron
Consult Cameron for
FKM 2712425-18
Part Numbers
16 1 Bonnet ASTM A487 Grade 4 Class D J024985-030 2140428-01
n • 18 1 Bonnet Seal HNBR 2712425-60
FKM J005521-342
n • 19 1 Gate Steel AISI 4140 w/QPQ Nitride Coating 2269412-01
410 SS Consult Cameron
20 1 Body Materials Weld End – ASTM A487 Grade 4 Class D Consult Cameron
Body Part Numbers
n • 21 1 Seat Rings: AISI 410 SS; Elastomer: HNBR 2269403-01
Rings: AISI 410 SS; Elastomer: FKM Consult Cameron
22 1 Cotter Pin Steel J005420-18728
23 2 Housing Stud J002066 J021436
Materials ASTM A193 Grade B7 ASTM A193 Grade L7
24 2 Housing Stud Nut 2709000-08-01 J053252-034
Materials ASTM A194 Grade 2H ASTM A194 Grade 7
25 4 Body Stud J015432 J021442
26 4 Body Stud Nut 2709000-10-01 J053252-038
n Major repair kit J025177-11574 – One each for one year of service.
• Minor repair kit J025177-01574.
13
2” (50 mm) Full Port for General Service Conditions
14.00 (356) DIA

1
2
22
7 23
24
11 25
13.04 (331)
BRONZE BUSHING
8 26
(Open)
12 16
9
18
FLAT BOTTOM ADAPTER

13
2.63 (67)
20 15 14 21 19
A

Valve Size: 2” (50 mm) FP
Dimension
7500 WP
A Weld End 9.00 (229)
Flanged End, API Length 20.50 (521)
For Flanged Ends
API Ring Number BX-152
Flange ID 2.06 (52)
Flange OD 7.88 (200)
Flange Bolts (Qty., Size: in.) 8 – 3/4
Weight lb (kg)
Weld End 76 (34)
Flanged End 124 (56)
14
minutes, each side. Test is charted. Material traceability on body, bonnet, stem, and bolting. Impact tests at or below -50° F (-46° C)
Parts List
Assembly Base Number Weld End J024993 J025077 J025078
Flanged End, API Length J025130 J025208 J025131
4 1 Lock Handle AISI C-1213 J001891
8 1 Screw Housing ASTM A350 Grade LF2 Class 1 J024982
n 9 1 Stem 410 SS J024983-107
FKM J005531-210
11 1 Packing Retainer AISI C-1213 J001940 -
17-4 PH SS - J021432
(With Bronze Bushing – ASTM B505 Alloy 93200) FKM J023231-006
n • 14 2 Body Wear Ring For Steel Gate, AISI 4140 w/QPQ Nitride Coating M452267
For SS Gate, AISI 410 Stainless Steel 2139647-02
n • 15 2 Wear Ring Seal HNBR 2712425-03
FKM J005521-229
16 1 Bonnet ASTM A487 Grade 4 Class D J024985-030 2140428-01 2140341-01
FKM J005521-342
n • 19 1 Gate Steel AISI 4140 w/QPQ Nitride Coating 2171111-01
410 SS 2139624-02
20 1 Body Materials ASTM A487 Grade 4 Class D Consult Cameron for
Body Part Numbers
n • 21 1 Seat 2139742-01
410 SS/HNBR Rings: AISI 410 SS; Elastomer: HNBR
410 SS/FKM Rings: AISI 410 SS; Elastomer: FKM
22 1 Cotter Pin Steel J005420-18728
23 2 Housing Stud J002066 J021436
25 4 Body Stud J015432 J021442
26 4 Body Stud Nut 2709000-10-01 J053252-038
15
3” (80 mm) Full Port for General Service Condition
23.00 (584) DIA

4
2
6
7 8
1 23
24 24.60 (625)
BRONZE BUSHING 13

16
25
12
26
9
FLAT BOTTOM ADAPTER 20

18
14
3.38 (86)
17 15 21 19
A

Dimension
7500 WP
A Weld End 13.00 (330)
Flanged End, API Length 24.38 (619)
For Flanged Ends
Flange ID 3.06 (78)
Flange OD 10.62 (270)
Flange Bolts (Qty., Size: in.) 8–1
Weight lb (kg)
Weld End 256 (116)
16
minutes, each side. Test is charted. Material traceability on body, bonnet, stem and bolting. Impact tests at or below -50° F (-46° C)
on body, bonnet, stem, and bolting. Surface NDE on body, bonnet and stem.
Parts List
Assembly Base Number J025051 J025079 J025080
3 1 Stem Tube Clear Acrylic J007459
4 1 Stem Cap Ductile Iron ASTM A536 Grade 65-45-12 J007411
5 1 Key Steel J005305-10016
8 1 Housing ASTM A350 Grade LF2 Class 1 J007418 J021448-040
Materials AISI C-1029 Normalized ASTM A352 Grade LCC
n 9 1 Stem 410 SS J024951-107
FKM J005531-214
11 1 Packing Retainer J007413 J021434
Materials AISI C-1213 17-4 PH SS
(With Bronze Bushing – SAE 660) FKM J001951-006
n 13 2 Bearing Teflon®/Phenolic J007426
n• 14 1 Gate Clip AISI 302 SS M450505
n• 15 2 Body Wear Ring For Steel Gate M452571
Material AISI 4140 w/QPQ Nitride Coating
For SS Gate 2139648-02
Material AISI 410 Stainless Steel
16 1 Bonnet ASTM A487 Grade 4 Class D J017289-029 2140370-01 2140370-02
FKM J005521-340
FKM J005521-361
n • 19 1 Gate AISI 4140 w/QPQ Nitride Coating 2171112-01
410 SS 2139628-02
Body Part Numbers
n • 21 1 Seat 410 SS/HNBR 2139744-01
Materials Rings: AISI 410 SS; Elastomer: HNBR
410 SS/FKM
Materials Rings: AISI 410 SS; Elastomer: FKM
23 2 Housing Stud J002072 J021441
25 12 Body Stud J015432 J021442
26 12 Body Stud Nut 2709000-10-01 J053252-038
17
24.00 (600) DIA
23
24
2
18 14 22
25 27.54 (700)
26
BRONZE BUSHING 3 19
8
20
21 9
FLAT TOP FOLLOWER
5
7
6
HOMOGENEOUS RUBBER SEAL RING 10 11
FLAT BOTTOM ADAPTER

4
16
4.40 (112)
15 12 13

Valve Size: 4“ (100 mm) FP
Dimension
7500 WP
A Weld End 16.00 (406)
Flanged End 26.38 (670)
For Flanged Ends
Flange ID 4.06 (103)
Flange OD 12.44 (316)
Flange Bolts (Qty., Size: in.) 8 – 1-1/8
Weight lb (kg)
Weld End 310 (141)
18
Parts List
1 1 Handwheel Ductile Iron ASTM A536 Grade 65-45-12 J015334
2 1 Handwheel Screw AISI C-1018 J014832
3 4 Retainer Screw J005665-32028 J005666-32028
Materials Alloy Steel 18-8 SS
(With Bronze Bushing – ASTM B271 Alloy C95500) FKM J015853-006
n 6 1 Stem 410 SS 2140684-01
7 1 Bonnet ASTM A487 Grade 4 Class D 2172523-01 2172523-02 2172523-03
8 10 Body Stud 2171976-11-01 2171978-11-01
9 10 Body Stud Nut 2709000-11-01 J053252-140
FKM J005521-364
Body Part Numbers
n • 12 1 Seat 410 SS/HNBR 2139746-01
Materials Rings: AISI 410 Stainless Steel; Elastomers: HNBR
410 SS/FKM
Materials Rings: AISI 410 Stainless Steel; Elastomers: FKM
n • 13 1 Gate – Steel/QPQ AISI 4140 w/QPQ Nitride Coating 2171267-01
410 SS 2139637-02
n • 15 2 Body Wear Ring For Steel Gate M452290
Materials AISI 4140 w/QPQ Nitride Coating
For Stainless Steel Gate 2139649-02
Materials AISI 410 Stainless Steel
FKM J005521-349
n 18 1 Stem Screw with Bearings J0023888
Materials Stem Screw: AISI C-1018
Bearings: Hardened Steel Needle Thrust Bearings
19 1 Housing AISI C-1018 J015332
FKM J005531-216
21 1 Packing Retainer J015330 2172425-02
Materials AISI C-1018 AISI 4130
22 4 Housing Screw Steel SAE Grade 5 702500-14-00-34
24 1 Stem Cap Ductile Iron J015855
26 1 Relief Fitting Steel J051971
• Minor repair kit J025177-00474. 19
24.00 (610) DIA
23
24 1
18 14
22
25 31.81 (808)
BRONZE BUSHING 3 19
8
20
21 9
FLAT TOP FOLLOWER
5
7
6
HOMOGENEOUS RUBBER SEAL RING 10 11
FLAT BOTTOM ADAPTER

4
16
5.00 (127)
15 12 13

Dimension 7500 WP
A Weld End 17.88 (454)
Flanged End 29.00 (737)
For Flanged Ends
Flange ID 5.12 (130)
Flange OD 14.06 (357)
Weight lb (kg)
Weld End 506 (230)
20
Parts List
Key Valve Size: 5-3/16” (132 mm) FP
1 1 Handwheel Ductile Iron ASTM A536 Grade 65-45-12 J016986
2 1 Handwheel Screw AISI C-1018 J016987
3 4 Retainer Screw J005665-32028 J005666-32028
Materials Alloy Steel 18-8 SS
(With Bronze Bushing – ASTM B271 Alloy C95500) FKM J016995-006
n 6 1 Stem 410 SS J024943-107
7 1 Bonnet ASTM A487 Grade 4 Class D J024956-030 J024956-051 J024956-052
8 12 Body Stud 2171976-12-01 2171978-12-02
9 12 Body Stud Nut 2709000-12-01 J053252-142
FKM J005521-446
Body Part Numbers
n • 12 1 Seat 410 SS/HNBR 2139748-01
Materials Rings: AISI 410 Stainless Steel; Elastomers: HNBR
410 SS/FKM
Materials Rings: AISI 410 Stainless Steel; Elastomers: FKM
n • 13 1 Gate – Steel/QPQ AISI 4140 w/QPQ Nitride Coating 2171108-01
410 SS 2139629-02
n 14 1 Housing Seal Urethane 2726191-02-95
n • 15 2 Body Wear Ring For Steel Gate M452619
Materials AISI 4140 w/QPQ Nitride Coating
For Stainless Steel Gate 2139650-02
Materials AISI 410 Stainless Steel
FKM J005521-435
n 18 1 Stem Screw with Bearings J023848
Materials Stem Screw: AISI C-1018
19 1 Housing AISI C-1018 J018190
FKM J005531-218
21 1 Packing Retainer J018191 2171930-01
Materials AISI C-1018 AISI 4130
22 4 Housing Screw Steel SAE Grade 5 702500-16-00-40
24 1 Stem Cap Ductile Iron J018193
• Minor repair kit J025177-00574. 21
SERIES DM GATE VALVES – 2000, 3000, AND 5000 PSI WP
2” (50 mm) Full Port and 2-1/2” (65 mm) Reduced Port for General Service Conditions
14.00 (356) DIA

1
2
22
7 15
10
BRONZE BUSHING 13.00 (330)

11 (Open)
12
16
HOMOGENEOUS RUBBER SEAL RING 17
18
2.00
(51)
2.62 (67)
20 21 19
A
Valve Size: 2” (50 mm) FP and 2-1/2” x 2” (65 mm x 50 mm) RP*
Dimension 2000 WP – 4000 Test 3000 WP – 6000 Test 5000 WP – 7500 Test
A Threaded, Weld and Grooved 9.00 (229) 9.00 (229) 9.00 (229) 9.00 (229) 9.00 (229) 9.00 (229)
Flanged – RTJ 11.62 (295) - 11.62 (295) - 12.12 (308) -
Flange OD 6.50 (165) - 8.50 (216) - 8.50 (216) -
Flange Bolts (Qty., Size: in.) 8 – 5/8 - 8 – 7/8 - 8 – 7/8 -
Ring Number (RTJ) R-23 - R-24 - R-24 -
Weight lb (kg)
Threaded, Weld and Grooved 56 (25) 56 (25) 58 (26) 58 (26) 58 (26) 58 (26)
Flanged 70 (32) 70 (32) 100 (45) 100 (45) 110 (50) 110 (50)
* 2-1/2” x 2” (65 mm x 50 mm) RP only available in weld end.
22
Parts List
Key Valve Size: 2” (50 mm) FP and 2-1/2” (65 mm) RP
No. Qty. Description 2000 WP 3000 WP 5000 WP
Assembly Base 2” (50 mm) Full Port – Threaded J001026 J001027 J001028
Part Number – Weld J001029 J001030 J001031
– Grooved J011920 - -
– Flanged J001023 J001024 J001025
2-1/2” (65 mm) Reduced Port – Weld J001115 J001114 J001109
1 1 Lube Fitting Steel J005195 J005195 J005195
2 1 Handle ASTM A536 Ductile Iron 2139712-01 2139712-01 2139712-01
4 1 Lock Handle C-1213 J001891 J001891 J001891
n 6 1 Stem Screw C-1213 J001913 J001913 J001913
n 7 1 Stem Screw Seal Buna-N J005526-224 J005526-224 J005526-224
8 1 Screw Housing C-1018 J001848 J001848 J001848
n 9 1 Stem 303 SS -002, 316 SS -008 J001931-XXX J001931-XXX J001931-XXX
n 10 1 Secondary Seal Buna-N J005526-210 J005526-210 J005526-210
11 1 Retainer C-1213 J001940 J001940 J001940
n 12 1 Stem Seal Assembly Buna-N -001, FKM -006 J001949-XXX J001949-XXX J001949-XXX
13 1 Lock Screw Steel J005665-22004 J005665-22004 J005665-22004
15 1 Coupling A216 Steel -020, A487 Steel -030 J001446-020 J001446-020 J001445-030
16 1 Bonnet ASTM A105 J001237-XXX J001237-XXX J001237-XXX
Coatings Uncoated-020, Coated DEMCO 10-021, DEMCO 11-024, DEMCO 12-025
17 1 Index Pin Steel J001981 J001981 J001981
n • 18 1 Bonnet Seal Buna-N J005526-342 J005526-342 J005526-342
FKM J005531-342 J005531-342 J005531-342
n • 19 1 Gate J001887-XXX J001887-XXX J001887-XXX
Materials AISI 1045 Nickel Plated -002, Cast SS ASTM A351 Grade CF8M -008
20 1 Body Materials
Threaded, Weld and Grooved – ASTM A105 Normalized
2000 Flanged – Fabricated from Weld Body and
Commercial Flanges Consult Cameron for
3000 Flanged – ASTM A216 Grade WCB Body Part Numbers
5000 Flanged – ASTM A487 Grade 4A or 2B
Coatings (Except Weld End Bodies):
DEMCO 12
n • 21 1 Seat Assembly J001876-0XX J001876-0XX J001876-0XX
Materials Inserts: -01X Ductile Iron ASTM A395 or Steel AISI C1040
-08X 316 SS ASTM A351 Grade CF8M Annealed
Elastomers: -0X1 Buna-N, -0X2 FKM
22 1 Pin, Lock Handle Steel J005420-18728 J005420-18728 J005420-18728
23
SERIES DM GATE VALVES – 2000, 3000, AND 5000 PSI WP
2-1/2” (65 mm) and 3” (80 mm) Full Port
4” (100 mm) Reduced Port

for General Service Conditions
D
22 2
7
6 23
8 24
BRONZE BUSHING 11
10
25
FLAT TOP FOLLOWER
26
12 B
9
16
20
21
19

Valve Size in. (mm)
FP FP FP FP RP FP RP
2-1/2 (65) 3 (80) 2-1/2 (65) 3 (80) 4 x 3 (100 x 80) 3 (80) 4 x 3 (100 x 80)
Dimension 2000 WP – 4000 Test 3000 WP – 6000 Test 5000 WP – 7500 Test
A Threaded, Weld and Grooved 9.75 (248) 11.00 (279) 9.75 (248) 11.00 (279) 11.00 (279) 11.00 (279) 11.00 (279)
Flanged – RTJ 16.62 (422) 14.12 (359) 16.62 (422) 14.12 (359) - 15.62 (397) -
B (Open) 17.00 (432) 18.00 (457) 17.00 (432) 18.00 (457) 18.00 (457) 18.00 (457) 18.00 (457)
C (Seat Bore) 2.50 (64) 3.00 (76) 2.50 (64) 3.00 (76) 3.00 (76) 3.00 (76) 3.00 (76)
D 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483)
E Threaded, Weld and Grooved 3.12 (79) 3.50 (89) 3.25 (83) 3.69 (94) 3.69 (94) 3.94 (100) 3.94 (100)
Flanged – RTJ 3.19 (81) 3.50 (89) 3.19 (81) 3.69 (94) - 3.94 (100) -
Flange OD 7.50 (191) 8.25 (210) 9.62 (244) 9.50 (241) - 10.50 (267) -
Flange Bolts (Qty., Size: in.) 8-3/4 8-3/4 8-1 8-7/8 - 8 – 1-1/8 -
Ring Number (RTJ) R-26 R-31 R-27 R-31 - R-35 -
Weight lb (kg)
Threaded, Weld and Grooved 74 (34) 95 (43) 87 (39) 113 (51) 113 (51) 140 (64) 140 (64)
Flanged 141 (64) 131 (59) 170 (77) 175 (79) - 241 (109) -
24
Parts List
Key Valve Size: 2-1/2” (65 mm) FP Valve Size: 3” (80 mm) FP and 4” (100 mm) RP
No. Qty. Description 2000 WP 3000 WP 5000 WP 2000 WP 3000 WP 5000 WP
Assembly Base 2-1/2” (65 mm) and 3” (80 mm) J001042 J001043 - J001045 J001046 J001047
Part Number Full Port – Threaded
– Weld J001051 J001052 - J001054 J001055 J001056
– Grooved J011921 - - J011922 - -
– Flanged J001033 J001034 - J001036 J001037 J001038
4” (100 mm) Reduced Port – Weld - - - - J001113 J001110
1 1 Lube Fitting Steel J005195 J005195 J005195 J005195 J005195 J005195
2 1 Hub Assembly ASTM A536 Ductile Iron 2139713-01 2139713-01 2139713-01 2139713-01 2139713-01 2139713-01
4 1 Lock Handle AISI C1213 J001892 J001892 J001892 J001892 J001892 J001892
n 6 1 Stem Screw AISI C1213 J001914-002 J001914-002 J001914-002 J001914-003 J001914-003 J001914-003
n 7 1 Stem Screw Seal Buna-N J005526-226 J005526-226 J005526-226 J005526-226 J005526-226 J005526-226
8 1 Screw Housing Carbon Steel J001852 J001852 J001852 J001852 J001852 J001852
n 9 1 Stem 303 SS -002, 316 SS -008 J001932-XXX J001932-XXX J001932-XXX J001932-XXX J001932-XXX J001932-XXX
n 10 1 Secondary Seal Buna-N J005526-212 J005526-212 J005526-212 J005526-212 J005526-212 J005526-212
11 1 Retainer AISI C1213 J001941 J001941 J001941 J001941 J001941 J001941
n 12 1 Stem Seal Assembly Buna-N -001, FKM -006 J001950-XXX J001950-XXX J001950-XXX J001950-XXX J001950-XXX J001959-XXX
16 1 Bonnet Cast Steel ASTM A487 4A or 2B J001970-XXX J001974-XXX J001974-XXX J001971-XXX J001976-XXX J001980-XXX
Coatings Uncoated -030, Coated DEMCO 10 -031, DEMCO 11 -034, DEMCO 12 -035
n • 18 1 Bonnet Seal Buna-N J005526-427 J005526-427 J005526-427 J005526-431 J005526-433 J005526-433
FKM J005531-427 J005531-427 J005531-427 J005531-431 J005531-433 J005531-433
n • 19 1 Gate J001868-00X J001868-00X J001868-00X J001886-00X J001886-00X J001886-00X
Materials AISI 4140 Nickel Plated -002, Cast SS ASTM A351 Grade CF8M -008
20 1 Body Materials
ASTM A487 Grade 4 Class A or Grade 2 Class B Consult Cameron for
Coatings (Except Weld End Bodies): Body Part Numbers
DEMCO 12
n • 21 1 Seat Assembly J001877-0XX J001877-0XX J001877-0XX J001878-0XX J001878-0XX J001878-0XX
Materials Inserts: -001 Ductile Iron ASTM A395 or Steel AISI C1040
-008 316 SS ASTM A351 Grade CF8M Annealed
22 1 Pin, Lock Handle Steel J005420-18732 J005420-18732 J005420-18732 J005420-18732 J005420-18732 J005420-18732
23 2 Bonnet Stud ASTM A193 Grade B7 J002066 J002066 J002066 J002066 J002066 J002066
24 2 Bonnet Stud Nut ASTM A194 Grade 2H 2709000-08-01 2709000-08-01 2709000-08-01 2709000-08-01 2709000-08-01 2709000-08-01
25 4 Body Stud ASTM A193 Grade B7 J002072 J002074 J002074 J002072 J002074 J002076
26 4 Body Stud Nut ASTM A194 Grade 2H 2709000-09-01 2709000-10-01 2709000-10-01 2709000-09-01 2709000-10-01 2709000-13-01
25
SERIES DM GATE VALVES – 2000 AND 3000 PSI WP
4” (100 mm) Full Port
5” (125 mm) Reduced Port

for General Service Conditions D
22 2
7
6 23
8 24
BRONZE BUSHING 11
10
25
FLAT TOP FOLLOWER
26
12 B
9
16
20
21
19

Valve Size
4” (100 mm) FP 4” (100 mm) FP 5” x 4” (125 mm x 100 mm) RP
Dimension 2000 WP – 4000 Test 3000 WP – 6000 Test
A Threaded, Weld and Grooved 13.00 (330) 13.00 (330) 13.00 (330)
Flanged – RTJ 16.38 (416) 16.38 (416) -
B (Open) 21.25 (540) 21.25 (540) 21.25 (540)
C (Seat Bore) 4.00 (102) 4.00 (102) 4.00 (102)
D 23.00 (584) 23.00 (584) 23.00 (584)
E Threaded, Weld and Grooved 4.31 (109) 4.56 (116) 4.56 (116)
Flanged – RTJ 4.31 (109) 4.56 (116) -
Flange OD 10.75 (274) 11.50 (292) -
Flange Bolts (Qty., Size: in.) 8 – 7/8 8 – 1-1/8 -
Ring Number (RTJ) R-37 R-37 -
Weight lb (kg)
Threaded, Weld and Grooved 140 (64) 162 (73) 162 (73)
Flanged 200 (91) 265 (120)
26
Parts List
Valve Size: 4” (100 mm) FP** Valve Size: 4” (100 mm) FP and
Key 5” (125 mm) RP
No. Qty. Description 2000 WP 3000 WP
Assembly Base 4” (100 mm) Full Port – Threaded J001048 J001049
Part Number – Weld J001057 J001058
– Grooved J011923
– Flanged J001039 J001040
5” (125 mm) Reduced Port – Weld - J001111
1 1 Lube Fitting Steel J005195 J005195
2 1 Hub Assembly ASTM A536 Ductile Iron 2139714-01 2139714-01
4 1 Lock Handle C-1213 J001897 J001897
n 6 1 Stem Screw C-1213 J001915 J001915
n 7 1 Stem Screw Seal Buna-N J005526-227 J005526-227
8 1 Screw Housing Carbon Steel J001958 J001958
n 9 1 Stem 303 SS -002, 316 SS -008 J001933-XXX J001933-XXX
n 10 1 Secondary Seal Buna-N J005526-214 J005526-214
11 1 Retainer C-1213 J001942 J001942
n 12 1 Stem Seal Assembly Buna-N -001, FKM -006 J001951-XXX J001951-XXX
16 1 Bonnet Cast Steel ASTM A487 4A or 2B J001972-XXX J001977-XXX
n • 18 1 Bonnet Seal Buna-N J005526-438 J005526-439
FKM J005531-438 J005531-439
n • 19 1 Gate J001926-00X J001926-00X
Materials AISI 4140 Nickel Plated -002
Cast SS ASTM A351 Grade CF8M Annealed -008
20 1 Body Materials
DEMCO 12
n • 21 1 Seat Assembly J002207-0XX J002207-0XX
Materials Inserts: -02X Steel AISI 1040
22 1 Pin, Lock Handle Steel J005420-18732 J005420-18732
23 2 Bonnet Stud ASTM A193 Grade B7 J002072 J002072
24 2 Bonnet Stud Nut ASTM A194 Grade 2H 2709000-09-01 2709000-09-01
25 4 Body Stud ASTM A193 Grade B7 J002074 ***J024500
26 4 Body Stud Nut ASTM A194 Grade 2H 2709000-10-01 ***2709000-12-01
*** Valves made prior to 1994 may use seven pitch stud J002075 and nut L053251-042.
** Available as 4-1/16” (103 mm) casing thread 2000 WP-J025020-4422110; 3000 WP-J024968-4422110.
27
SERIES DM GATE VALVES – 5000 PSI WP – FOUR-BOLT BONNET DESIGN
5” (125 mm) and 6” (150 mm)

Reduced Port for 23.00 (584) DIA
General Service Conditions 4
6
2
5
7 8
1
23
24
BRONZE BUSHING 13
16
24.56 (624)
10
FLAT TOP FOLLOWER 11 25
12
26
9
18
4.00 (102)
4.56 (116)
20
21
19
A
Valve Size: 4” (100 mm) FP Valve Size: 5” x 4” (125 mm x 100 mm) and 6” x 4” (150 mm x 100 mm) RP
A Threaded and Weld 13.00 (330) 13.00 (330)
Flanged – RTJ 18.00 (457) -
Flange OD 12.25 (311) -
Flange Bolts (Qty., Size: in.) 8 – 1-1/4 -
Ring Number (RTJ) R-39 -
Turns to Open 23 23
Weight lb (kg)
Threaded and Weld 210 (95) 210 (95)
Flanged 315 (142) -
28
Parts List
Valve Size: 4” Valve Size: 5” (125 mm) and
Key (100 mm) FP 6” (150 mm) RP
No. Qty. Description 5000 WP – 7500 Test
Assembly Base Part Number 4” (100 mm) Full Port J007420 J007420
5” (125 mm) Reduced Port – Weld J007421 J007421
2 1 Handle ASTM A536 Ductile Iron 2139481-01 2139481-01
3 1 Tube Clear Acrylic J007459 J007459
4 1 Stem Cap ASTM A536 Ductile Iron J007411 J007411
n 5 1 Key Steel J005305-10016 J005305-10016
n 6 1 Stem Screw C-1213 J007416 J007416
n 7 1 Stem Screw Seal Buna-N J005526-226 J005526-226
8 1 Screw Housing C-1029 J007418 J007418
n 11 1 Retainer C-1213 J007413 J007413
n 12 1 Stem Seal Assembly Buna-N J001951-001 J001951-001
FKM J001951-006 J001951-006
90 Durometer Buna-N J022093-001 J022093-001
n 13 2 Bearing Teflon/Phenolic J007426 J007426
n 14 1 Downstop Ring 303 SS J007417 J007417
16 1 Bonnet ASTM A487 Grade 4 Class C or Grade 2 Class B J007419-XXX J007419-XXX
FKM J005531-439 J005531-439
n • 19 1 Gate J001926-00X J001926-00X
ASTM A351 Grade CF8M -008
20 1 Body Materials
DEMCO 12
25 4 Body Stud ASTM A193 Grade B7 J002077 J002077
26 4 Body Stud Nut ASTM A194 Grade 2H J001890 J001890
29
SERIES DM GATE VALVES – 5000 PSI WP – 12-BOLT BONNET DESIGN
5” (125 mm) and 6” (150 mm) Reduced Port

23.00 (584) DIA
4
6
2
5
7 8
1
23
24
BRONZE BUSHING 13
16 24.62 (625)
10
FLAT TOP FOLLOWER
11 25
12
FABRIC REINFORCED SEAL RING 26

9
14
4. (102)
4.69 (119)
20
21
19
A

Valve Size: 4” (100 mm) FP Valve Size: 5” x 4” (125 mm x 100 mm) and 6” x 4” (150 mm x 100 mm) RP
A Threaded and Weld 13.00 (330) 13.00 (330)
Flanged – RTJ 18.00 (457) -
Flange OD 12.25 (311) -
Flange Bolts (Qty., Size: in.) 8 – 1-1/4 -
Ring Number (RTJ) R-39 -
Turns to Open 23 23
Weight lb (kg)
Threaded and Weld 210 (95) 210 (95)
Flanged 330 (150) 330 (150)
30
Parts List
Key Valve Size: 4” (100 mm) FP Valve Size: 5” (125 mm) and 6” (150 mm) RP
No. Qty. Description 5000 WP – 7500 Test
Assembly Base Number 4” (100 mm) Full Port J017263 J017263
2 1 Handle ASTM A536 Ductile Iron 2139481-01 2139481-01
3 1 Tube Clear Acrylic J007459 J007459
4 1 Stem Cap ASTM A536 Ductile Iron J007411 J007411
n 5 1 Key Steel J005305-10016 J005305-10016
n 6 1 Stem Screw C-1213 J007416 J007416
7 1 Stem Screw Seal Buna-N J005526-226 J005526-226
8 1 Screw Housing C-1029 J007418 J007418
n 11 1 Retainer C-1213 J007413 J007413
n 12 1 Stem Seal Assembly Buna-N J001951-001 J001951-001
FKM J001951-006 J001951-006
90 Durometer Buna-N J022093-001 J022093-001
n 13 2 Bearing Teflon/Phenolic J007426 J007426
n 14 1 Downstop Ring 303 SS J007417 J007417
16 1 Bonnet ASTM A487 Grade 4 Class C J017289-XXX J017289-XXX
FKM J005531-361 J005531-361
n • 19 1 Gate J001926-00X J001926-00X
ASTM A351 Grade CF8M Annealed -008
20 1 Body Materials
ASTM A487 Grade 4 Class A Consult Cameron for
DEMCO 12
25 12 Body Stud ASTM A193 Grade B7 J015432 J015432
26 12 Body Stud Nut ASTM A194 Grade 2H 2709000-10-01 2709000-10-01
31
SERIES DM GATE VALVES – 3000 AND 5000 PSI WP
5-1/8” (130 mm) Full Port
6” (150 mm) x 5-1/8” (130 mm) Reduced Port

24.00 (610) DIA
24
23
1
2
14
22
25 26
19 24.56 (624)
BRONZE BUSHING 18 21
3 7
FLAT TOP FOLLOWER
20
5 8
9

6
4.00 (102)
11
12
13
A

Valve Size: 5-1/8” (130 mm) FP and 6” x 5-1/8” (150 mm x 130 mm) RP
Dimension 3000 and 5000 WP – 6000 and 7500 Test
A Threaded and Weld 16.00 (406)
Weight lb (kg) 335 (152)
32
Parts List
Valve Size: 5-1/8” Valve Size: 6 “ (150 mm) x 5-1/8” (130 mm) RP
Key (130 mm) FP 5-1/8” (130 mm) FP
No. Qty. Description 3000 WP – 6000 Test 5000 WP – 7500 Test
Assembly Base Part Number Full Port – Threaded J021954 J023925
Reduced Port – Weld - J025086
1 1 Handwheel Ductile Iron ASTM A536 Grade 2227656-01
65-45-12
2 1 Screw – Handwheel Steel AISI C1018 J014832
3 4 Screw – Retainer Alloy Steel J005665-32028
4 1 Downstop Ring Steel AISI C1018 J021942
* 5 1 Stem Seal Assembly w/Bushing -001 Buna-N, -006 FKM J015853-00X
6 1 Stem -002 303 SS -009, 17-4 pH SS J021943-00X J021943-009
7 1 Bonnet Cast Steel ASTM A487 Grade 4 Class C J021944-03X
8 12 Body Stud Steel ASTM A193 Grade B7 J015432
9 12 Body Stud Nut Steel ASTM A194 Grade 2H 2709000-10-01
* 10 1 Bonnet Seal Buna-N J005526-367
FKM J005531-367
11 1 Body Materials
ASTM A487 Grade 4 Class A Consult Cameron for
DEMCO 12
* 12 1 Seat Assembly J021948-011 J021948-019
J021948-012 -
J021948-081 -
J021948-082 -
Materials Inserts: -01X Steel AISI 1040, -08X 316 SS (3000 WP Only)
Elastomers: -0X1 Buna-N, -0X2 FKM, -0X9 90 Duro Buna-N
* 13 1 Gate -002 Steel AISI 4140 Nickel Plated,
J021952-00X J021952-002
008 316 SS (3000 WP Only)
14 1 Stem Screw Seal Buna-N J005526-228
18 1 Stem Screw w/Bearings Steel AISI C1018, Steel Bearings J023888 -
AL. BRZ. ASTM B148 Alloy 955, Steel Bearings - J024526
19 1 Housing Steel AISI C1018 J015332
20 1 Secondary Seal Buna-N J005526-216
21 1 Retainer Steel AISI C1018 J015330
22 4 Screw – Housing Steel J005650-32056
23 1 Tube Clear Acrylic J012852
24 1 Stem Cap Ductile Iron ASTM A536 Grade 65-45-12 J015855
26 1 Relief Fitting Steel J051971
* Recommended spare parts – One each for one year of service.
33
SERIES DM GATE VALVES – ASME CLASSES 400 AND 600
1-1/2” and 2” (40 mm and 50 mm) Full Port
2” (50 mm) Reduced Port for

General Service Conditions D
5 3
8 B
12
10
11 13

Valve Size: 1-1/2” (40 mm) FP Valve Size: 2” (50 mm) FP Valve Size: 2” (50 mm) FP
2” x 1-1/2” (50 mm x 40 mm) RP
Dimension ASME Class 600 ASME Class 400 ASME Class 600
A Full Port – Threaded, Weld and Grooved 7.75 (197) 8.88 (226) 8.88 (226)
Reduced Port – Threaded - - 7.75 (197)
Flanged – RF - 11.50 (292) 11.50 (292)
Flanged – RTJ - 11.62 (295) 11.62 (295)
B (Open) – Full Port 7.75 (197) 8.75 (222) 8.75 (222)
(Open) – Reduced Port - - 7.75 (197)
C (Seat Bore) – Full Port 1.62 (41) 2.00 (50) 2.00 (50)
(Seat Bore) – Reduced Port - - 1.62 (41)
D Full Port 9.50 (241) 11.00 (279) 11.00 (279)
Reduced Port - - 9.50 (241)
E Full Port 2.00 (50) 2.19 (56) 2.19 (56)
Reduced Port - - 2.00 (50)
F Flange OD - 6.50 (165) 6.50 (165)
Flange Bolts (Qty., Size: in.) - 8 – 5/8 8 – 5/8
Ring Number (RTJ) - R-23 R-23
Weight lb (kg)
Full Port – Threaded, Weld and Grooved 20 (9) 24 (11) 26 (12)
Reduced Port – Threaded - - 20 (9)
Full Port – Flanged - 42 (19) 44 (20)
Reduced Port – Flanged - - 40 (18)
34
Parts List
Valve Size: 1-1/2” (40 mm) FP Valve Size: 2” (50 mm) FP Valve Size: 2” (50 mm) FP
2” x 1-1/2” RP
Key (50 mm x 40 mm) RP
No. Qty. Description ASME Class 600 ASME Class 400 ASME Class600
Assembly Base Part Number Full Port – Threaded J003938 J001071 J001072
– Weld - J001091 J001092
– Grooved - J001081 J001082
– Flanged - J001061 J001062
Reduced Port – Threaded J003939 - -
1 1 Handle Ductile Iron ASTM A536 Grade 65-45-12 J004375 J001276 J001276
2 1 Stem Pin Spring Steel J005445-25020 J005445-37528 J005445-37528
3 1 Lube Fitting Steel J005195 J005195 J005195
4 1 Backup Ring Chrome Leather J005532-115 J005532-211 J005532-211
5 1 Stem Seal Buna-N J005526-115 J005526-211 J005526-211
FKM J005531-115 J005531-211 J005531-211
6 1 Stem 303 SS -002, 316 SS -008 J004376-XXX J001279-XXX J001279-XXX
7 1 Bonnet Ductile Iron ASTM A395 - J001277-01X -
Steel ASTM A216 Grade WCB J004330-02X - J001277-02X
Coatings Uncoated -0X0, Coated DEMCO 10 -0X1, DEMCO 11 -0X4, DEMCO 12, -0X5
8 4 Body Screw SAE Grade 5 J005651-32024 J005651-32024 J005651-32024
10 1 Bonnet Seal Buna-N J005526-234 J005526-239 J005526-239
FKM J005531-234 J005531-239 J005531-239
11 1 Body Materials
2” (50 mm) Full Class 400 Threaded, Grooved
and Flanged: Ductile Iron ASTM A395
2” (50 mm) Full Class 600 Threaded, Weld and Consult Cameron for
Grooved: Forged Steel AISI C1029 Normalized Body Part Numbers
All Others: Steel, ASTM A216 Grade WCB
DEMCO 12
12 1 Seat J004081-0XX J001876-0XX J001876-0XX
Materials Inserts: -01X Ductile Iron ASTM A395 or Steel AISI 1040
-08X Stainless Steel ASTM A351 Grade CF8M Annealed
13 1 Gate J004393-00X J001275-00X J001275-00X
Materials: -002 Steel, Nickel Plated AISI C1144 AISI C1045 AISI C1045
-008 Stainless Steel AISI 316 Annealed ASTM A351 CF8M Annealed
35
2-1/2” (65 mm) through 6” (150 mm) Full Port
8” (200 mm) Reduced Port for

General Service Conditions D
5 3
8 B
12
10
11 13

Valve Size in. (mm)
2-1/2 (65) FP 3 (80) FP 4 (100) FP 6 (150) FP 8 x 6 (200 x 150) RP
ASME Classes ASME Classes ASME Class ASME Class ASME Class ASME Class ASME Class
Dimension 400 and 600 400 and 600 400 600 400 600 600
A Threaded, Weld and Grooved 10.00 (254) 10.25 (260) 11.88 (302) 11.88 (302) 15.50 (394) 15.50 (394) -
Flanged – RF 13.00 (330) 14.00 (356) - 17.00 (432) 19.50 (495) 22.00 (559) 26.00 (660)
Flanged – RTJ 13.12 (333) 14.12 (359) - 17.12 (435) 19.62 (498) 22.12 (562) 26.12 (663)
B (Open) – Full Port 10.62 (270) 11.38 (290) 13.88 (353) 13.88 (353) 19.25 (489) 19.25 (489) -
(Open) – Reduced Port - - - - - - 19.25 (489)
C (Seat Bore) – Full Port 2.50 (64) 3.00 (76) 4.00 (102) 4.00 (102) 6.00 (152) 6.00 (152) -
(Seat Bore) – Reduced Port - - - - - - 6.00 (152)
D Full Port 12.62 (321) 12.62 (321) 14.25 (362) 14.25 (362) 24.00 (610) 24.00 (610) -
Reduced Port - - - - - - 24.00 (610)
E Full Port 2.75 (70) 3.19 (81) 3.94 (100) 3.94 (100) 5.62 (143) 5.62 (143) -
Reduced Port - - - - - - 5.62 (143)
F Flange OD 7.50 (191) 8.25 (210) - 10.75 (274) 12.50 (318) 14.00 (356) 16.50 (419)
Flange Bolts (Qty., Size: in.) 8 – 3/4 8 – 3/4 - 8 – 5/8 12 – 7/8 12 – 1 12 – 1-1/8
Ring Number (RTJ) R-26 R-31 - R-37 R-45 R-45 R-49
Weight lb (kg)
FP – Threaded, Weld and Grooved 48 (22) 50 (23) 58 (26) 60 (27) 93 (42) 98 (44) 300 (136) 310 (141) -
FP – Flanged 70 (32) 74 (34) 90 (41) 96 (44) - 176 (80) 411 (186) 428 (194) -
RP – Flanged - - - - - - - - 590 (268)
36
Parts List
Valve Size in. (mm) Valve Size in. (mm) Valve Size in. (mm)
Valve Size in. (mm)
2-1/2 (65) FP 3 (80) FP 4 (100) FP•
6 (150) FP
8 (200) RP
Key ASME Class ASME Class ASME Class ASME Class ASME Class ASME Class ASME Class ASME Class
No. Qty. Description 400 600 400 600 400 600 400 600
Assembly Base Part Number Full Port – Threaded J001073 J001074 J001075 J001076 J001077 J001078 J001079 J001080
– Weld J001093 J001094 J001095 J001096 J001097 J001098 J001099 J001100
– Grooved J001083 J001084 J001085 J001086 J001087 J001088 J001089 J001090
– Flanged J001063 J001064 J001065 J001066 - J001068 J001069 J001070
Reduced Port – Flanged - - - - - - - J003945
1 1 Handle Ductile Iron ASTM A536 Grade 65-45-12 J001290 J001290 J001849 J001850
2 1 Stem Pin Spring Steel J005445-37528 J005445-37528 J005445-37532 J005445-37532
3 1 Lube Fitting Steel J005195 J005195 J005195 J005195
4 1 Backup Ring Chrome Leather J005532-212 J005532-212 J005532-214 J005532-214
5 1 Stem Seal Buna-N J005526-212 J005526-212 J005526-214 J005526-214
FKM J005531-212 J005531-212 J005531-214 J005531-214
6 1 Stem 303 SS -002, 316 SS -008 J001291-XXX J001291-XXX J001853-XXX J001854-XXX
7 1 Bonnet ASTM A395 Ductile Iron - J001856-01X - J001857-01X - J001858-01X -
ASTM A216 Grade WCB J001293-02X - J001856-02X - J001857-02X - J001858-02X
Coatings Uncoated -0X0, Coated DEMCO 10 -0X1, DEMCO 11 -0X4, DEMCO 12 -0X5
8 4 Body Stud ASTM A193 Grade B7 J002066 J001861 J001862 J001863
9 4 Body Stud Nut ASTM A194 Grade 2H 2709000-08-01 2709000-09-01 2709000-10-01 2709000-14-01
10 1 Bonnet Seal Buna-N J005526-245 J005526-249 J005526-258 J005526-446
FKM J005531-245 J005531-249 J005531-258 J005531-446
11 1 Body Materials
Class 400 3” (80 mm) Full Port through 6” (150 mm)
Full Port Threaded, Grooved and Flanged:
Consult Cameron For
Ductile Iron ASTM A395
Body Part Numbers
All Others: Steel, ASTM A216 Grade WCB
DEMCO 12
12 1 Seat J001877-0XX J001878-0XX J002207-0XX J001880-0XX
Materials Inserts: -01X Ductile Iron ASTM A395 or Steel AISI 1040 2-1/2”, 3”, 6”
-02X Steel AISI 1040 4”
-08X Stainless Steel ASTM A351 Grade CF8M Annealed
13 1 Gate J001881-00X J001882-00X J001883-00X J001884-00X
Materials -002 Steel AISI 1045, Nickel Plated, -008 316 SS Annealed
• Available as 4-1/16” (103 mm) casing thread ASME Class 400-J024969-4422110.
37
2” (50 mm) through 6” (150 mm) Full Port
2” (50 mm) through 3” (80 mm) Full Port

D
1 4 3 15
6
8
14
9
7 B
10
F
C
11
12 13

Valve Size in. (mm)
2” (50 mm) FP 2-1/2” (65 mm) FP 3” (80 mm) FP 4” (100 mm) FP 6” (150 mm) FP
ASME Class ASME Classes ASME Class ASME Class ASME Class ASME Class
Dimension 1500 900 and 1500 900 1500 900 900
A Threaded, Weld and Grooved N/A* - 9.75 (248) 11.00 (279) 11.00 (279) 13.00 (330) 20.00 (508)
Flanged – RF 14.50 (368) 16.50 (419) 15.00 (381) 18.50 (470) 18.00 (457) 24.00 (610)
Flanged – RTJ 14.62 (371) 16.62 (422) 15.12 (384) 18.62 (473) 18.12 (460) 24.12 (613)
B Open 9.88 (251) 22.88 (581) 12.75 (324) 12.75 (324) 15.00 (381) 19.25 (489)
C Seat Bore 2.00 (51) 2.50 (64) 3.00 (76) 3.00 (76) 4.00 (102) 6.00 (152)
D 14.50 (368) 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483) 19.00 (483)
F Flange OD 8.50 (216) 9.62 (244) 9.50 (241) 10.50 (267) 11.50 (292) 15.00 (381)
Flange Bolts (Qty., Size: in.) 8 – 7/8 8–1 8 – 7/8 8 – 1-1/8 8 – 1-1/8 12 – 1-1/8
Ring Number (RTJ) R-24 R-27 R-31 R-35 R-37 R-45
Weight lb (kg)
Threaded, Weld and Grooved N/A* 48 (22) 87 (39) 95 (43) 113 (51) 140 (64) 325 (147)
Flanged 100 (45) 170 (77) 160 (73) 205 (93) 230 (104) 540 (245)
* Refer to 2000, 3000 and 5000 threaded, weld and grooved end on pages 22 and 23.
38
Parts List
Valve Size in. (mm)
2” (50 mm) FP 2-1/2” (65 mm) FP 3” (80 mm) FP 4” (100 mm )FP 6” (150 mm) FP
ASME ASME ASME ASME ASME ASME ASME ASME
Key Class Class Class Class Class Class Class Class
No. Qty. Description 900 1500 900 1500 900 1500 900 1500
Assembly Base Part Number J003947 J003948 J003951 J003952 J003953 J003957 J003955 J003999
1 1 Handle Ductile Iron ASTM A536 J023661 J0018195 J0018195 J023663 J001850
Grade 65-45-12
2 1 Stem Pin Spring Steel J005445-37528 J005445-37528 J005445-37528 J005445-37532
3 1 Lube Fitting Steel J005195 J005195 J005195 J005195
4 1 Backup Ring Chrome Leather J005532-211 J005532-212 J005532-212 J005532-214
* 5 1 Stem Seal Buna-N J005526-211 J005526-212 J005526-212 J005526-214
FKM J005531-211 J005531-212 J005531-212 J005531-214
6 1 Stem 303 SS -002, 316 SS -008 J004395-XXX J004396-XXX J004396-XXX J004397-00X J001854-00X
7 1 Bonnet ASTM A487 Grade 4 Class A J004320-03X J004322-03X J004324-03X J004326-03X J004328-03X J001780-03X
8 4 Body Stud J002072 J002074 J002072 J002074 J002074 J002077
9 4 Body Stud Nut ASTM A194 Grade 2H 2709000-09-01 2709000-10-01 2709000-09-01 27090000-10-01 J001890
* 10 1 Bonnet Seal Buna-N J005526-342 J005526-427 J005526-431 J005526-433 J005526-438 J005526-446
FKM J005531-342 J005531-427 J005531-431 J005531-433 J005531-438 J005531-446
11 1 Body Materials Consult Cameron for
ASTM A487 Grade 4 Class A or Grade 2 Class B Body Part Numbers
* 12 1 Seat Assembly J001876-0XX J001877-0XX J001878-0XX J002207-0XX J001880-0XX
Materials Inserts: -01X Ductile Iron ASTM A395 or Steel AISI 1040
* 13 1 Gate J001275-XXX J001881-XXX J001882-00X J001883-00X J001884-00X
Materials -002 Nickel Plated Steel AISI 4145
-008 316 SS Wrought Type - 2” (50 mm) Only ASTM A351 CF8M – Others
14 1 Screw Seal Buna-N J005526-222 J005526-234 J005526-224 J005526-226 -
15 1 Relief Fitting Steel J005197 J005197 J005197 J005197 -
* Recommended spare parts – one each for one year of service.
39
SERIES DM GATE VALVES – ASME CLASS 1500
23.00 (584) DIA

3
16
22 1
14
23
18
24
19
BRONZE BUSHING
21
8
9
5
21.25 (540)
HOMOGENEOUS RUBBER SEAL RING 6
7
FLAT BOTTOM ADAPTER
10
4.00 (102)
4.56 (116)
11
12
13
A
Dimension ASME Class 1500
A Threaded and Weld 13.00 (330)
Flanged – RF 21.50 (546)
Flanged – RTJ 21.62 (449)
Flange OD 12.25 (311)
Ring Number (RTJ) R-39
Weight lb (kg)
Threaded and Weld 162 (73)
Flanged 320 (145)
40
Parts List
Key
No. Qty. Description ASME Class: 1500
Assembly Base Part Number J003010
1 1 Handle Assembly Ductile Iron ASTM A536 Grade 65-45-12 2139714-01
* 5 1 Stem Seal Assembly Buna-N J001951-001
FKM J001951-006
6 1 Stem 303 SS -002, 316 SS -008 J001933-XXX
7 1 Bonnet ASTM A487 Grade 4 Class A or Class B J001977-XXX
8 4 Body Stud ASTM A193 Grade B7 **J0024500
9 4 Body Stud Nut ASTM A194 Grade 2H **2709000-12-01
* 10 1 Bonnet Seal Buna-N J005526-439
FKM J005531-439
11 1 Body Materials Consult Cameron for
ASTM A487 Grade 4 Class A or Grade 2 Class B Body Part Numbers
* 12 1 Seat J002207-0XX
* 13 1 Gate J001926-XXX
Materials -002 AISI 4140 Nickel Plated
-008 ASTM A351 Grade CF8M
14 1 Screw Seal Buna-N J005526-227
16 1 Lock Handle AISI C1213 J001897
18 1 Stem Screw AISI C1213 J001915
19 1 Screw Housing AISI 1029 J001958
* 20 1 Secondary Seal Buna-N J005526-214
21 1 Retainer AISI C1213 J001942
22 1 Pin, Lock Handle Steel J005420-18732
23 2 Bonnet Stud ASTM A193 Grade B7 J002072
24 2 Body Stud Nut ASTM A194 Grade 2H 2709000-09-01
* Recommended spare parts – one each for one year of service.

** Valves made prior to 1994 may use 7 pitch stud J002075 and nut J053251-042.
41
SERIES DT GATE VALVES – ASME CLASSES 600, 900, AND 1500
2” (50 mm) Full Port NACE Compliant Seat Spring
Seat Seal
D
P-10 Insert
40
130 12 0
FLAT TOP FOLLOWER
FABRIC REINFORCED 50
SEAL RING 60
180
HOMOGENEOUS
21 110 P-10
RUBBER SEAL RING
200 (Open) SEAT SPRING AND SEAL
B
FLAT BOTTOM 90 PART OF SEAT ASSEMBLY
ADAPTER 20
70
100
10
160
Seat Seal
F C
E
50
SEE SEAT DETAIL 30 SEAT ASSEMBLY DETAIL

PC BUNA, FKM, HNBR
SEAT SEAL
A PART OF SEAT ASSEMBLY

A Threaded - 8.50 (216) 8.50 (216)
Flanged – RF 11.50 (292) 14.50 (368) 14.50 (368)
Flanged – RTJ 11.62 (295) 14.62 (371) 14.62 (371)
B (Open) 14.63 (372) 14.63 (372) 14.63 (372)
C (Seat Bore) 2.06 (52) 2.06 (52) 2.06 (52)
D 14.50 (368) 14.50 (368) 14.50 (368)
E 5.00 (127) 5.25 (133) 5.25 (133)
F Flange OD 6.50 (165) 8.50 (216) 8.50 (216)
Flange Bolts (Qty., Size: in.) 8 – 5/8 8 – 7/8 8 – 7/8
Ring Number (RTJ) R-23 R-24 R-24
Weight lb (kg)
Threaded - 44 (20) 44 (20)
Flanged 48 (22) 82 (37) 82 (37)
Working Pressure (psi)

End Connection Material ASME Class 600 ASME Class 900 ASME Class 1500
Threaded Bronze - 2220 3705
Stainless Steel - 2220 3705
Flanged Bronze 1480 2220 3705
Stainless Steel 1440 2160 3600
42
Parts List
Key ASME Class ASME Class
No. Qty. Description 600 900/1500 Material Specification (See Note 1)
Assembly Base Part Number J024997 J024998/J024999
10 1 Body Aluminum Bronze ASTM B148 Alloy 955
Consult Cameron for Body Part Numbers
Stainless Steel CF8M
20 1 Bonnet 2060241-11 J024323-060 Aluminum Bronze ASTM B148 Alloy 955
2060241-12 J024660-080 Stainless Steel CF8M
21 1 Stem Bushing (f/SS Bonnet) J024661-060 Bronze ASTM B505 Alloy 93200
30 1 Gate 1, 2, 5 J024558-008 Stainless Steel CF8M
(See Note 2) 6,7,8,9 J024559-008
40 1 Stem J024089-008 316 SS
50 2 Seat Assembly 1 2061588-01 Ring: CF8M; Elastomer: Buna-N, Peroxide-Cured, 90 Duro
(See Note 2) 2 2061589-01 Ring: CF8M; Elastomer: FKM, 75 Duro
5 2227057-01 Ring: CF8M; Elastomer: HNBR, Peroxide-Cured, 80 Duro
6 2061590-01 Ring: CF8M; Insert: PEEK; Seal: Buna-N, Peroxide-Cured,
90 Duro; Spring: Inconel® X-750
7 2227058-01 Ring: CF8M; Insert: PEEK; Seal: HNBR, 90 Duro;
Spring: Inconel X-750
8 Consult Cameron for Assembly Part Numbers Ring: CF8M; Insert: PEEK; Seal: HNBR, 90 Duro;
9 Consult Cameron for Assembly Part Numbers Ring: CF8M; Insert: PEEK; Seal: AFLAS, 90 Duro;
60 1 Handle 2139937-01 Ductile Iron ASTM A536 Grade 65-45-12
70 1 Stem Packing Retainer J024324-008 316 SS
90 1 Stem Seal Assembly J024882-601 Teflon/Elgiloy
100 1 Retainer Snap Ring J090066-162 PH 15-7 Mo
110 4 Stud 219066-07-02-21 219066-08-02-61 ASTM A193 B7M/Zinc-Plated
120 1 Lube Fitting 005929-18 Steel
130 1 Vent Fitting 2726258-01 Steel
160 1 Bonnet Seal 1, 6 J005520-234 Buna-N, Peroxide-Cured, 90 Duro
(See Note 2) 2, 8 J005521-234 FKM, 90 Duro
5, 7 2712425-37 HNBR,90 Duro
9 2788035-08 AFLAS
180 1 Handle Seal J005526-219 Buna-N
200 4 Nut 2709000-07-11 2709000-08-11 ASTM A194 2HM/Zinc-Plated
Notes: 1. CF8M is ASTM A351 Grade CF8M annealed. 316 SS is AISI Type 316 SS annealed.
2. These parts are keyed to the assembly part number. ”Seat insert/seal” code numbers indicated.
43
2-1/2” (65 mm) Full Port NACE Compliant Seat Spring
Seat Seal
D
P-10 Insert
40
130 120
FLAT TOP FOLLOWER

50
FABRIC REINFORCED
SEAL RING 60
180
HOMOGENEOUS
21 110 P-10
RUBBER SEAL RING
200 (Open) B
ADAPTER 20
70
100
10
160
Seat Seal
F C
E
50
SEE SEAT DETAIL 30 SEAT ASSEMBLY DETAIL

PC BUNA, FKM, HNBR
SEAT SEAL

Valve Size: 2-1/2” (65 mm) FP
A Threaded - 8.75 (222) 8.75 (222)
Flanged – RF 13.00 (330) 16.50 (419) 16.50 (419)
Flanged – RTJ 13.12 (333) 16.62 (422) 16.62 (422)
B (Open) 16.71 (424) 16.71 (424) 16.71 (424)
C (Seat Bore) 2.56 (65) 2.56 (65) 2.56 (65)
D 14.75 (375) 14.75 (375) 14.75 (375)
E 6.12 (155) 6.38 (162) 6.38 (162)
F Flange OD 7.50 (191) 9.62 (244) 9.62 (244)
Flange Bolts (Qty., Size: in.) 8 – 3/4 8–1 8–1
Weight lb (kg)
Threaded - 57 (26) 57 (26)
Flanged 77 (35) 110 (50) 110 (50)

Threaded Bronze - 2220 3705
Stainless Steel - 2220 3705
Stainless Steel 1440 2160 3600
44
Parts List
Valve Size: 2-1/2” (65 mm) FP
Key ASME Class ASME Class
No. Qty. Description 600 900/ 1500 Material Specification (See Note 1)
Assembly Base Part Number J025000 J025001/J025002
10 1 Body Aluminum Bronze ASTM B148 Alloy 955
Consult Cameron for Body Part Numbers
Stainless Steel CF8M
20 1 Bonnet Aluminum Bronze 2139015-11 2139020-11 Aluminum Bronze ASTM B148 Alloy 955
Stainless Steel 2139015-12 2061920-01 Stainless Steel CF8M
21 1 Stem Bushing (f/SS Bonnet) J024676-060 Bronze ASTM B150 Alloy C63000
30 1 Gate 1, 2, 5 2060265-01 Stainless Steel CF8M
(See Note 2) 6, 7, 8, 9 2060266-01
40 1 Stem f/ Aluminum Bronze Valve 2060256-02 316 SS
f/ Stainless Steel Valve 2060256-02 2061921-01
5 Consult Cameron for Seat Assembly Part Numbers Ring: CF8M; Elastomer: HNBR, Peroxide-Cured, 80 Duro
6 2061590-02 Ring: CF8M; Insert: PEEK; Seal: Buna-N, Peroxide-Cured, 90 Duro
7 Consult Cameron for Seat Assembly Part Numbers Ring: CF8M; Insert: PEEK; Seal: HNBR, Peroxide-Cured, 90 Duro
8 Consult Cameron for Seat Assembly Part Numbers Ring: CF8M; Insert: PEEK; Seal: FKM, 90 Duro
9 Consult Cameron for Seat Assembly Part Numbers Ring: CF8M; Insert: PEEK; Seal: AFLAS, 90 Duro
70 1 Stem Packing Retainer 2060259-08 316 SS
130 1 Vent Fitting 2726258-01 Steel
5,7 2712425-08 HNBR, 90 Duro
9 2788035-08 AFLAS
45
Seat Seal
D
P-10 Insert
40
130 120
FLAT TOP FOLLOWER
SEAL RING 60
180
HOMOGENEOUS
21 110 P-10
RUBBER SEAL RING
200 (Open) B
ADAPTER 20
70
100
10
160
Seat Seal
F C
E
50
SEE SEAT DETAIL 30

PC BUNA, FKM, HNBR
SEAT SEAL

A Threaded - 9.69 (246) -
Flanged – RF 14.00 (356) 15.00 (381) 18.50 (470)
Flanged – RTJ 14.12 (359) 15.12 (384) 18.62 (373)
B (Open) 18.00 (457) 18.00 (457) 18.82 (478)
C (Seat Bore) 3.12 (79) 3.12 (79) 3.12 (79)
D 14.75 (375) 14.75 (375) 18.00 (457)
E 6.81 (173) 6.94 (176) 7.15 (182)
F Flange OD 8.25 (210) 9.50 (241) 10.50 (257)
Flange Bolts (Qty., Size: in.) 8 – 3/4 8 – 7/8 8 – 1-1/8
Weight lb (kg)
Threaded - 75 (34) -
Flanged 100 (45) 125 (37) 185 (84)

Threaded Bronze - 2220 -
46
Parts List
Key ASME Class ASME Class ASME Class
No. Qty. Description 600 900 1500 Material Specification (See Note 1)
Assembly Base Part Number J025003 J025004 J025005
10 1 Body Consult Cameron for Body Part Numbers Aluminum Bronze ASTM B148 Alloy 955
20 1 Bonnet J024624-006 J024642-006 Aluminum Bronze ASTM B148 Alloy 955
30 1 Gate 1, 2,5 J024621-008 Stainless Steel CF8M
(See Note 2) 6, 7, 8, 9 J024623-008
40 1 Stem J024620-008 J024820-008 316 SS
5 Consult Cameron for Seat Assy Part Numbers Ring: CF8M; Elastomer: HBNR, Peroxide-Cured, 80 Duro
Ring: CF8M; Insert: PEEK; Seal: Buna-N, Peroxide-Cured, 90 Duro
6 2061590-03
Ring: CF8M; Insert: PEEK; Seal: HPNR, 90 Duro;
7 Consult Cameron for Seat Assembly Part Numbers
Ring: CF8M; Insert: PEEK; Seal: FKM, 90 Duro;
8 Consult Cameron for Seat Assembly Part Numbers
9 Consult Cameron for Seat Assembly Part Numbers Ring: CF8M; Insert: PEEK; Seal: AFLAS, 90 Duro;
60 1 Handle 2139931-01 2139932-01 Ductile Iron ASTM A536 Grade 65-45-12
70 1 Stem Packing Retainer 2060259-08 316 SS
90 1 Stem Seal Assembly J024882-603 Filled PTFE/Elgiloy
130 1 Relief Fitting 2726258-01 Steel
5, 7 Consult Cameron for Bonnet Seal Part Numbers HBNR, 90 Duro
9 2788035-07 AFLAS
47
Seat Seal
D
P-10 Insert
40
130 120
FLAT TOP FOLLOWER
SEAL RING 60
180
HOMOGENEOUS
110 P-10
RUBBER SEAL RING
200 (Open) B
ADAPTER 20
70
100
10
160
Seat Seal
F C
E
50
SEE SEAT DETAIL 30

PC BUNA, FKM, HNBR
SEAT SEAL

A Flanged – RF 17.00 (332) 18.00 (457) 21.50 (546)
Flanged – RTJ 17.12 (435) 18.12 (460) 21.62 (549)
B (Open) 22.25 (565) 22.25 (565) 22.54 (573)
C (Seat Bore) 4.06 (103) 4.06 (103) 4.06 (103)
D 23.00 (584) 23.00 (584) 23.00 (584)
E 9.00 (229) 9.12 (232) 9.41 (239)
F Flange OD 10.75 (273) 11.50 (292) 12.25 (311)
Flange Bolts (Qty., Size: in.) 8 – 7/8 8 – 1-1/8 8 – 1-1/4
Weight lb (kg)
Flanged 170 (77) 215 (98) 295 (134)

End Connection Material ASME Class 600 ASME Class 900 ASME Class1500
48
Parts List
Key ASME Class ASME Class ASME Class
No. Qty. Description 600 900 1500 Material Specification (See Note 1)
Assembly Base Part Number J025006 J025007 J025008
10 1 Body – 4” Consult Cameron for Body Part Numbers Aluminum Bronze ASTM B148 Alloy 955
20 1 Bonnet J024711-006 J024712-006 J024713-006 Aluminum Bronze ASTM B148 Alloy 955
30 1 Gate 1, 2, 5 J024719-008 J024721-008 Stainless Steel CF8M
(See Note 2) 6, 7, 8, 9 J024720-008 J024722-008
40 1 Stem J024717-008 J024718-008 316 SS – 600 and 900 Only; XM-19 1500 Only
5 Consult Cameron for Seat Assembly Part Numbers Ring: CF8M; Elastomer: HBNR, Peroxide-Cured, 80 Duro
6 2061587-04
Ring: CF8M; Insert: PEEK; Seal: HNBR, 90 Duro
7 Consult Cameron for Seat Assembly Part Numbers Spring: Inconel X-750
8 Ring: CF8M; Insert: PEEK; Seal: FKM, 90 Duro
Consult Cameron for Seat Assembly Part Numbers
9 Ring: CF8M; Insert: PEEK; Seal: AFLAS, 90 Duro
Consult Cameron for Seat Assembly Part Numbers
70 1 Stem Packing Retainer J024716-008 316 SS
110 4 Stud 219066-08-02-61 219066-09-03-21 219066-11-04-21 ASTM A193 B7M/Zinc-Plated
5, 7 Consult Cameron for Bonnet Seal Part Numbers HBNR, 90 Duro
9 2788035-10 AFLAS
200 4 Nut 2709000-08-11 2709000-09-11 2709000-11-11 ASTM A194 2HM/Zinc-Plated
49
SERIES DT GATE VALVES – ASME CLASS 900
Seat Seal
P-10 Insert
D
250
260
BRONZE BUSHING
150
60
FLAT TOP FOLLOWER
50
180 200
FABRIC REINFORCED 240 SEAT ASSEMBLY DETAIL

120 130
SEAL RING 210
P-10
230 B
170 SEAT SPRING AND SEAL
90 220 PART OF SEAT ASSEMBLY
HOMOGENEOUS
110
RUBBER SEAL RING 40
140
FLAT BOTTOM 190 20
ADAPTER
160
Seat Seal
F C
E
50
10
SEE SEAT DETAIL PC BUNA, FKM, HNBR
30 SEAT SEAL
PART OF SEAT ASSEMBLY
A

Dimension ASME Class 900
A Flanged – RF 24.00 (610)
Flanged – RTJ 24.12 (613)
B (Open) 33.85 (860)
C (Seat Bore) 6.06 (154)
D 24.00 (610)
E 12.38 (314)
F Flange OD 15.00 (381)
Ring Number (RTJ) R-45
Weight lb (kg)
Flanged Consult Cameron

End Connection Material ASME Class 900
Flanged Bronze 2220
50
Parts List
Valve Size: 6”
Key (150 mm) FP
No. Qty. Description ASME Class 900 Material Specification (See Note 1)
Assembly Base Part Number J025150
10 1 Body 6” (150 mm) RF – AL BRZ 2227657-00-56 Aluminum Bronze ASTM B148 Alloy 955
RTJ – AL BRZ 2227657-00-46
20 1 Bonnet AL BRZ 2227661-06 Aluminum Bronze ASTM B148 Alloy 955
30 1 Gate 1, 2, 5 2227658-08 Stainless Steel CF8M on 900; Duplex UNS S31803 on 1500
(See Note 2) 6, 7, 8, 9 2227964-08
40 1 Stem 2227666-08 316 SS on 900
5 Consult Cameron for Part Number Ring: CF8M; Elastomer: HNBR, Peroxide-Cured, 80 Duro
6 2061590-06
7 Consult Cameron for Part Number Ring: CF8M; Insert: PEEK; Seal: HNBR, 90 Duro; Spring: Inconel X-750
8 Consult Cameron for Part Number Ring: CF8M; Insert: PEEK; Seal: FKM, 90 Duro; Spring: Inconel X-750
9 Consult Cameron for Part Number Ring: CF8M; Insert: PEEK; Seal: AFLAS, 90 Duro; Spring: Inconel X-750
90 1 Stem Seal Assembly 1, 6 J021706-001 Buna-N, Peroxide-Cured, 90 Duro
5, 7 J015853-008 HNBR, 90 Duro
110 8 Stud 2119066-09-04-21 ASTM A193 B7M/Zinc-Plated

140 8 Nut 2709000-09-11 ASTM A194 2HM/ Zinc-Plated
150 1 Screw – Handle J014832 Steel AISI C1018
160 1 Body Seal 1, 6 J005520-367 Buna-N, Peroxide-Cured, 90 Duro
5, 7 2738507-15 HNBR, 90 Duro
9 2788035-11 AFLAS, 90 Duro
170 4 Screw – Retainer 702589-14-00-16 Alloy Steel
180 1 Stem Screw Seal J005526-228 Buna-N on 900
190 1 Downstop Ring J015848 316 SS
200 1 Stem Screw with Bearings Stem Screw with Steel AISI C1018
J023888
210 1 Housing J015332 Steel AISI C1018
220 1 Secondary Seal 1, 6 J005526-216 Buna-N, 70 Duro
5, 7, 9 2738507-09 HNBR, 90 Duro
230 1 Retainer J015330-101 Steel AISI C1018
240 4 Screw – Housing J056511-32056 ASTM A193 B7M/ Zinc-Plated
250 1 Tube J019160 Clear Acrylic
260 1 Stem Cap J019161 Ductile Iron ASTM A536 Grade 65-45-12
Notes: 1. CF8M is ASTM A351 Grade CF8M annealed. XM-19 is ASTM A479 Type XM-19 hot rolled.
2. These parts are keyed to the assembly part number. ”Seat insert/seal” code numbers indicated. 51
CAMSERV Aftermarket Services
for Valves and Actuation
WE BUILD IT. WE BACK IT.
Startup and Commissioning

Our experts understand that each project is unique. That’s why Cameron’s CAMSERV ™
services help facilitate commissioning and start-up activities.
• Integrated solutions, onsite or at our global service centers
• Increased equipment and product performance
• The shortest possible trouble-free startup for your critical assets
Spare Parts and Asset Management

Cameron offers the assets and expertise to cover all aspects of valve management.
• Full inventory of quality exact OEM parts and spares
• Complete asset risk and criticality assessments
• Comprehensive inventory of your assets, including a complete recommended

spare valves and parts list
Operational Support
Cameron’s ability to address valve requirements in the field is a reflection of our
commitment to life-of-asset support.
• Innovative asset management solutions
• Trouble-free installation, startup and operations
• Support from commission to operation – extending through all

phases of a valve’s life cycle
• Extensive inventory of spare valves and parts
Cameron’s CAMSERV site

management mitigates the risk
of project delays by identifying
issues in the construction
process prior to valve installation
to ensure valve integrity.
52
Trademark Information
DEMCO is a registered trademark of Cameron. CAMSERV is a trademark of Cameron.
This document contains references to registered trademarks or product designations,

which are not owned by Cameron.
Trademark Owner
CELCON Hoechst Celanese Corporation
ENDURO-BOND Energy & Environmental Services, Inc.
FLUOREL Minnesota Mining and Manufacturing Company
HYCAR Hydrocarbon Chemical and Rubber Company
HYDRIN Zeon Chemicals USA, Inc.
NORDEL E.I. DuPont De Nemours & Company
TEFLON E.I. DuPont De Nemours & Company
CERTIFICATIONS American Bereau of Shipping
WARNING: Failure to comply with Cameron operations and maintenance manuals, safety alerts, engineering bulletins and other documentation and failure to
use OEM parts can adversely affect performance and can cause serious injury or death and property damage.
53
3250 Briarpark Drive, Suite 300
Houston, TX 77042
USA
Toll Free 1 800 323 9160
Learn more about DEMCO gate valves:

www.c-a-m.com/DEMCO
[email protected]
ENVIRONME
ND N
A
TA
TH SAFETY
HSE Policy Statement

LE
XCELLEN
At Cameron, we are committed ethically, financially and personally to a

working environment where no one gets hurt and nothing gets harmed.
AL
CE
HE
CA
MERON
©2014 Cameron | DEMCO, NAVCO, NUTRON, THORNHILL CRAVER, TOM WHEATLEY, WHEATLEY and WKM are registered trademarks of Cameron.
CAMSERV and TECHNO are trademarks of Cameron. Total Valve Care is a service mark of Cameron. Teflon and all brands listed
54
are registered trademarks or trademarks of their respective companies. | SWP 2.5M 05/14, AD00772V

Válv. Cameron Demco

Uploaded by

Copyright:

Available Formats

Válv. Cameron Demco

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Válv. Cameron Demco

Uploaded by

Copyright:

Available Formats

DEMCO Gate Valves

DEMCO GATE VALVES

Series DM Gate Valves........................................................................... 3

Series DM 1000 to 5000 psi Gate Valves................................................ 4

Series DM 7500 psi Gate Valves............................................................. 5

Series DT/DB Gate Valves....................................................................... 7

Enhanced Oil Recovery Accessories........................................................ 9

General Technical Information........................................................... 10

Dimensions and Materials/Parts List

Series DM 7500 Gate Valves – 7500 psi WP...................................... 12

Series DM Gate Valves – 2000, 3000, and 5000 psi WP.................... 22

Series DM Gate Valves – ASME Classes 400 and 600........................ 34

Series DM Gate Valves – ASME Classes 900 and 1500...................... 38

Series DT Gate Valves – ASME Classes 600, 900, and 1500............... 42

CAMSERV Aftermarket Services for Valves and Actuation....................... 52

Cameron is a leading provider of valves, valve automation, and measurement systems

• Drilling standpipe manifold

Features and Benefits

Flexible Trim Offerings

Double Acting Thread Design

to provide a drop-tight shutoff in abrasive and erosive service.

E. The seat consists of two identical metal wear rings

body for replacement.

Series DM 4” (100 mm) 5000 WP

For proper valve repair, use Cameron’s DEMCO replacement parts.

Heavy-Duty Roller Bearings

Floating Slab Gate Design

A. Unique, abrasion resistant, one-piece seat design

support rings to which a resilient elastomer is

DM Series Pressure Classes and Sizes

* Other weld connections are available. Consult Cameron for information.

Four-Ring Packing Set SEAT ASSEMBLY DETAIL

Full Through-Conduit Design Seat Seal

SEAT ASSEMBLY DETAIL

DT and DB Series Pressure Classes and Sizes

Corrosion-Resistant Materials are Standard

parts, comply with NACE RP-0475.

Rising Stem Design

A. Pressure-responsive drop-tight sealing C

Standard seats consist of 316 SS seat rings encapsulated

excellent deterrent to abrasion, further enhancing

Full through-conduit design ensures non-turbulent flow

For proper valve repair, use Cameron’s DEMCO replacement parts.

ENHANCED OIL RECOVERY ACCESSORIES

F. Ball Check Valves

Ball Check Valves Strainers

Valve Size Designations and Weld End Dimensional Information

in. (mm) OD Sch 40 Sch 80 Sch 160 XXH

2. Reduced port valve size descriptions are designated by two numbers.

Seat Seal Options

Coatings – DM Gate Valves Only

14.00 (356) DIA

BRONZE BUSHING 13.04 (331)

FLAT BOTTOM ADAPTER

Dimensional Data and Weights

14.00 (356) DIA

FLAT TOP FOLLOWER 10

FLAT BOTTOM ADAPTER

Dimensional Data and Weights

E. The seat consists of two identical metal wear rings

A. Unique, abrasion resistant, one-piece seat design

Standard seats consist of 316 SS seat rings encapsulated

Full through-conduit design ensures non-turbulent flow

2. Reduced port valve size descriptions are designated by two numbers.

• Comprehensive inventory of your assets, including a complete recommended