DONIT - TDS-GrafilitSP-05-2018 - LQ - 09052017. JUNTAS VAPOR

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

GRAFILIT® SP

GRAFILIT® SP is an expanded graphite based material with tanged stainless steel insert, thus
enhances the surface load and blowout safety. GRAFILIT® SP has excellent chemical, thermal, and
mechanical resistance. GRAFILIT® SP is gasket material used in wide range of industries, as gas
and steam supply, chemical and petrochemical industry.

PROPERTIES APPROPRIATE INDUSTRIES & APPLICATIONS


MECHANICAL THERMAL
RESISTANCE RESISTANCE AUTOMOTIVE AND ENGINE
GENERAL PURPOSE BUILDING INDUSTRY
SUPERIOR SEALABILITY CHEMICAL
PERFORMANCE RESISTANCE
WATER SUPPLY SHIPBUILDING
EXCELLENT
POTABLE WATER SUPPLY POWER PLANT
VERY GOOD
STEAM SUPPLY REFRIGERATION AND COOLING
GOOD
GAS SUPPLY HEATING SYSTEMS
MODERATE
CHEMICAL INDUSTRY HIGH TEMP. APPLICATIONS

PETROCHEMICAL INDUSTRY COMPRESSORS AND PUMPS

PAPER AND
VALVES
CELLULOSE INDUSTRY

Expanded natural graphite (>99% graphite purity),


Composition
tanged stainless steel sheet insert (AISI 316; 0.1 mm)
Color Black

Approvals DIN-DVGW DIN 3535-6 DVGW VP 401 (5 bar) API 607


BAM (Oxygen) Germanischer Lloyd

TECHNICAL DATA Typical values for a thickness of 1.5 mm


Density DIN 28090-2 g/cm3 1.5
Compressibility ASTM F36A % 35
Recovery ASTM F36A % 17
Stress resistance DIN 52913
16 h, 50 MPa, 300 °C MPa 49
Specific leak rate DIN 3535-6 .
mg/(s
m) 0.05
Leachable chloride content FSA NMG 202 ppm 20
Leachable fluoride content FSA NMG 203 ppm 20
Ash content of graphite DIN 51903 % <1
Compression modulus DIN 28090-2
At room temperature: εKSW % 34
At elevated temperature: εWSW/300 ˚C % 1.2
Percentage creep relaxation DIN 28090-2
At room temperature: εKRW % 4.2
At elevated temperature: εWRW/300 ˚C % 3.3
Operating conditions
Minimum temperature ˚C/˚F -200/-328
Continuous temperature
- oxidizing atmosphere ˚C/˚F 550/1022
- reducing or inert atmosphere ˚C/˚F 700/1292
Pressure
- Demanding gasses bar/psi 60/870
- Steam, gasses bar/psi 130/1885
- Liquids bar/psi 160/2320

P-T DIAGRAMS
Demanding gasses Steam, gasses Liquids
200 200 200

150 150 150


PRESSURE [bar]

PRESSURE [bar]

PRESSURE [bar]

100 100 100

50 50 50

0 0 0
-200 -150 -100 -50 0 50 100 150 200 250 300 350 400 450 500 550 600 -200 -150 -100 -50 0 50 100 150 200 250 300 350 400 450 500 550 600 -200 -150 -100 -50 0 50 100 150 200 250 300 350 400 450 500 550 600

TEMPERATURE [˚C] TEMPERATURE [˚C] TEMPERATURE [˚C]

Turn the page


P-T DIAGRAMS
EN 1514-1, Type IBC, PN 40, DIN 28091-2 / 3.8, 1.5 mm

P-T diagrams indicate the maximum permissible combination of General suitability - Under common installation practices and
internal pressure and service temperature which can be chemical compatibility.
simultaneously applied for a given gasket according its material
type, thickness, size and tightness class. Given the wide variety of
gasket applications and service conditions, these values should only Limited suitability - Technical consultation is mandatory.
be regarded as guidance for the proper gasket assembly. In general,
thinner gaskets exhibit better P-T properties.

CHEMICAL RESISTANCE CHART


The recommendations made here are intended as a guideline for the selection of a suitable gasket type. As the function and durability of products are
dependent upon a number of factors, the data may not be used to support any warranty claims.
Legend: + Recommended, ? Recommendation depends on operating conditions, - Not recommended.

Acetamide ? Butyric acid + Formic acid, 85% ? N-Methyl-pyrrolidone (NMP) + Silicones (oil/grease) +
Acetic acid, 10% + Calcium chloride ? Formic acid, 100% ? Milk + Soaps +
Acetic acid, 100% (Glacial) ? Calcium hydroxide + Freon-12 (R-12) + Mineral oil (ASTM no.1) + Sodium aluminate +
Acetone + Carbon dioxide (gas) + Freon-134a (R-134a) + Motor oil + Sodium bicarbonate +
Acetonitrile + Carbon monoxide (gas) + Freon-22 (R-22) + Naphtha + Sodium bisulfite +
Acetylene (gas) + Cellosolve + Fruit juices + Nitric acid, 10% ? Sodium carbonate +
Acid chlorides ? Chlorine (gas) ? Fuel oil + Nitric acid, 65% ? Sodium chloride +
Acrylic acid + Chlorine (in water) - Gasoline + Nitrobenzene + Sodium cyanide +
Acrylonitrile + Chlorobenzene + Gelatin + Nitrogen (gas) + Sodium hydroxide +
Adipic acid + Chloroform + Glycerine (Glycerol) + Nitrous gases (NOx) ? Sodium hypochlorite (Bleach) -
Air (gas) + Chloroprene + Glycols + Octane + Sodium silicate (Water glass) +
Alcohols + Chlorosilanes ? Helium (gas) + Oils (Essential) + Sodium sulfate +
Aldehydes + Chromic acid - Heptane + Oils (Vegetable) + Sodium sulfide ?
Alum ? Citric acid ? Hydraulic oil (Glycol based) + Oleic acid + Starch +
Aluminium acetate ? Copper acetate + Hydraulic oil (Mineral type) + Oleum (Sulfuric acid, fuming) - Steam +
Aluminium chlorate ? Copper sulfate + Hydraulic oil (Phosphate ester based) + Oxalic acid ? Stearic acid +
Aluminium chloride - Creosote + Hydrazine + Oxygen (gas) + Styrene +
Aluminium sulfate + Cresols (Cresylic acid) + Hydrocarbons + Palmitic acid + Sugars +
Amines + Cyclohexane + Hydrochloric acid, 10% - Paraffin oil + Sulfur +
Ammonia (gas) + Cyclohexanol + Hydrochloric acid, 37% - Pentane + Sulfur dioxide (gas) +
Ammonium bicarbonate + Cyclohexanone + Hydrofluoric acid, 10% - Perchloroethylene + Sulfuric acid, 20% -
Ammonium chloride ? Decalin + Hydrofluoric acid, 48% - Petroleum (Crude oil) + Sulfuric acid, 98% -
Ammonium hydroxide + Dextrin + Hydrogen (gas) + Phenol (Carbolic acid) + Sulfuryl chloride -
Amyl acetate + Dibenzyl ether + Iron sulfate + Phosphoric acid, 40% ? Tar +
Anhydrides + Dibutyl phthalate + Isobutane (gas) + Phosphoric acid, 85% ? Tartaric acid ?
Aniline + Dimethylacetamide (DMA) + Isooctane + Phthalic acid + Tetrahydrofuran (THF) +
Anisole + Dimethylformamide (DMF) + Isoprene + Potassium acetate + Titanium tetrachloride -
Argon (gas) + Dioxane + Isopropyl alcohol (Isopropanol) + Potassium bicarbonate + Toluene +
Asphalt + Diphyl (Dowtherm A) + Kerosene + Potassium carbonate + 2,4-Toluenediisocyanate +
Barium chloride ? Esters + Ketones + Potassium chloride + Transformer oil (Mineral type) +
Benzaldehyde + Ethane (gas) + Lactic acid ? Potassium cyanide + Trichloroethylene +
Benzene + Ethers + Lead acetate + Potassium dichromate ? Vinegar +
Benzoic acid + Ethyl acetate + Lead arsenate + Potassium hydroxide + Vinyl chloride (gas) +
Bio-diesel + Ethyl alcohol (Ethanol) + Magnesium sulfate + Potassium iodide + Vinylidene chloride +
Bio-ethanol + Ethyl cellulose + Maleic acid + Potassium nitrate + Water +
Black liquor ? Ethyl chloride (gas) + Malic acid ? Potassium permanganate ? White spirits +
Borax + Ethylene (gas) + Methane (gas) + Propane (gas) + Xylenes +
Boric acid + Ethylene glycol + Methyl alcohol (Methanol) + Propylene (gas) + Xylenol +
Butadiene (gas) + Formaldehyde (Formalin) + Methyl chloride (gas) + Pyridine + Zinc sulfate +
Butane (gas) + Formamide + Methylene dichloride + Salicylic acid +
Butyl alcohol (Butanol) + Formic acid, 10% ? Methyl ethyl ketone (MEK) + Seawater/brine ?
All information and data quoted are based upon decades of experience in the production and operation of sealing elements. This data may not be used to support any warranty claims. With its publication this latest edition supersedes all
previous issues and is subject to change without further notice.

Sheet size (mm): 1000 x 1000 | 1500 x 1500


Standard dimensions of sheets Thickness (mm): 0.5 | 1.0 | 1.5 | 2.0 | 3.0
Other sizes and thicknesses available on request.

DONIT TESNIT, d.o.o. Fax: +386 (0)1 582 32 06 For disclaimer please visit http://donit.eu/disclaimer
Cesta komandanta Staneta 38 +386 (0)1 582 32 08 Copyright © DONIT TESNIT, d.o.o.
1215 Medvode, Slovenia Web: www.donit.eu All rights reserved
Date of issue: 05.2018 / TDS-GSP-05-2018
Phone: +386 (0)1 582 33 00 E-mail: info@donit.eu

You might also like