Manual de Usuario Kenwood KDC-HD262U (Español - 50 Páginas)

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Wiring connection When connecting to an external

amplifier, connect its ground


Rear, front, subwoofer output wire to the car’s chassis to avoid
damaging the unit.
Antenna terminal
Fuse (10A)
Part list for installation

(A) Faceplate

White
If no connections are made, do not let the wire come out from the tab.
To front speaker (left) White/Black

Gray Light blue/yellow To the steering wheel remote (B) Trim plate
To front speaker (right) Gray/Black (Steering remote control control adapter
wire)
Green
To rear speaker (left) Green/Black
To the terminal that is grounded
Purple when the telephone rings or during (C) Mounting sleeve
Brown conversation (  14)
To rear speaker (right) Purple/Black
(Mute control wire) (To connect the Kenwood navigation
system, refer your navigation
Ignition switch manual.)
Car fuse box
Red (Ignition wire) (D) Wiring harness

To the power control terminal when


Yellow (Battery wire) Blue/White using the optional power amplifier
Car fuse box (Power control wire/ or to the antenna control terminal in
Antenna control wire) the vehicle
(E) Extraction key
Black (Ground wire)

To the metallic body or chassis of the car


Battery

ENGLISH 17

You might also like