Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    UMD9114

    Uploaded by

    zaurbeiker

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    UMD9114

    Uploaded by

    zaurbeiker
    6 views6 pages

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views6 pages

    UMD9114

    Uploaded by

    zaurbeiker

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    UNISONIC TECHNOLOGIES CO.

    , LTD
    UMD9114 Preliminary CMOS IC

    DC TAIL ROTOR MOTOR,


    STEERING GEAR MOTOR
    DRIVE CIRCUIT
    4
    5
    6
     DESCRIPTION
    3
    UTC UMD9114 is an integrated brush DC motor drive solution 2
    1
    for battery-powered toys, low-voltage or battery-powered motion SOT-26
    control applications. It has H bridge driver and uses the PMOS and
    NMOS power transistors with low output resistance. Low
    on-resistance ensures the circuit to consume lower power in
    operating at a continuous current, and ensures the circuit to
    operate stably for a long time. The circuit has a wide working
    voltage range from 2.5V to 5V. The maximum continuous output
    current reaches 0.5A, and the maximum peak output current can
    be 0.8A when VDD is 4V.
    UTC UMD9114 has on-chip temperature protection function.
    When load motor with low internal resistance is in locked rotor,
    UTC UMD9114 output current will increase momentarily, power
    dissipation of the circuit will go up sharply, and the chip
    temperature will soar. But, when the chip temperature exceeds a
    maximum temperature point (typically 160°C) set by internal
    temperature protection circuit, the internal circuit will switch off the
    on-chip power switching transistor of UTC UMD9114, and switch
    off load current, preventing potential safety hazards such as
    fuming, igniting of plastic package caused by over temperature etc.
    Only after having confirmed that the circuit has returned to safety
    temperature, the on-chip temperature hysteresis circuit can be
    allowed to re-control the circuit.

     FEATURES
    * Low standby current (0.1μA typ.)
    * PMOS and NMOS power transistors with low output resistance
    If IO is 100mA, RON of power transistor is 1.5Ω
    If IO is 200mA, RON of power transistor is 1.6Ω
    If IO is 300mA, RON of power transistor is 1.7Ω
    * Built-in Subsequent stream diode
    —No external diode required
    * Low input current
    Pull-down resistance is 1.8MΩ typical
    1.6uA input current when input voltage is 3V
    * On-chip thermal shut down (TSD) with hysteresis

    www.unisonic.com.tw 1 of 6
    Copyright © 2021 Unisonic Technologies Co., Ltd QW-R109-043.C
    UMD9114 Preliminary CMOS IC

     ORDERING INFORMATION
    Ordering Number
    Package Packing
    Lead Free Halogen Free
    UMD9114L-AG6-R UMD9114G-AG6-R SOT-26 Tape Reel

     MARKING

     PIN CONFIGURATION

    OUT2 1 6 OUT1

    GND 2 5 VDD

    IN2 3 4 IN1

     PIN DESCRIPTION
    PIN NO. PIN NAME DESCRIPTION
    1 OUT2 Reverse Drive Output Pin
    2 GND Ground
    3 IN2 Reverse Control Input Pin
    4 IN1 Forward Control Input Pin
    5 VDD Supply Voltage
    6 OUT1 Forward Drive Output Pin

    UNISONIC TECHNOLOGIES CO., LTD 2 of 6


    www.unisonic.com.tw QW-R109-043.C
    UMD9114 Preliminary CMOS IC

     BLOCK DIAGRAM
    VDD
    5
    VDD

    VDD
    Power
    IN1 4
    MOSFET 6 OUT1
    Driver
    GND LOGIC
    and
    VDD TSD
    GND
    VDD
    Circuit
    Power
    IN2 3
    MOSFET 1 OUT2
    6 Driver

    GND

    2
    GND

     LOGIC TRUTH TABLE


    IN1 IN2 OUT1 OUT2 FUNCTION
    L L Z Z Standby (Stop)
    H L H L Forward rotation
    L H L H Backward rotation
    H H L L Brake

    UNISONIC TECHNOLOGIES CO., LTD 3 of 6


    www.unisonic.com.tw QW-R109-043.C
    UMD9114 Preliminary CMOS IC

     ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified)


    PARAMETER SYMBOL RATINGS UNIT
    Maximum Supply Voltage VDD 5.5 V
    Maximum External Output Voltage VOUT VDD V
    Maximum External Input Voltage VIN VDD V
    Peak Output Current/Channel IOUT_PEAK 0.8 A
    Maximum continuous output current IOUT 0.55 A
    Maximum power PD 0.45 W
    Junction Temperature TJ +150 °C
    Operational Temperature Range TOPR -20 ~ +85 °C
    Storage Temperature TSTG -55 ~ +150 °C
    Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
    Absolute maximum ratings are stress ratings only and functional device operation is not implied.
     THERMAL DATA
    PARAMETER SYMBOL RATINGS UNIT
    Junction to Ambient θJAS 278 °C/W

     RECOMMENDED OPERATIONAL CONDITIONS (TA=25°C, unless otherwise specified)


    PARAMETER SYMBOL MIN TYP MAX UNIT
    Supply Voltage VDD 2.5 5 V
    Input Voltage VIN 0 VDD V
    Output current from OUT1 to OUT2 when
    IOC 300 500 mA
    VDD=4.5V

     ELECTRICAL CHARACTERISTICS (TA=25°C, VDD=3V, unless otherwise stated)


    PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
    The Power Supply Parameters
    IN1=IN2=L, VDD=5.5V,
    VDD Standby Current IVDDST 4 μA
    Output opened
    VDD Static Supply Current IVDD IN1=H or IN2=H; Output opened 100 μA
    Input Logic Level
    Input High Level VINH VDD=3V 0.7×VDD V
    Input Low Level VINL VDD=3V 0.2×VDD V
    Input High Level Current IINH VINH=3V, VDD=3V 2.0 μA
    Input the Pull-Down Resistor RIN VINH=3V, VDD=3V 1.8 MΩ
    The Power Tube Leads to Internal Resistance
    IO=±100mA, VDD=3V 1.5
    Output Resistance RON IO=±200mA, VDD=3V 1.6 Ω
    IO=±300mA, VDD=3V 1.7
    Protection Function Parameters
    Protection Temperature TSD 160 °C
    TSD Hysteresis TSDH 20 °C

    UNISONIC TECHNOLOGIES CO., LTD 4 of 6


    www.unisonic.com.tw QW-R109-043.C
    UMD9114 Preliminary CMOS IC

     TYPICAL WAVEFORM

    Forward Backward Brake Standby


    L H L H
    IN1
    Input signal L H L H
    IN2

    VDD
    Output voltage
    (VOUT1-VOUT2) 0
    -VDD

     APPLICATION INFORMATION
    Thermal shut down (TSD)
    When Junction Temperature reaches 160°C, the internal circuit will switch off the on-chip power switching
    transistor of UTC UMD9114, preventing potential safety hazards caused by over temperature. The temperature
    hysteresis of TSD is 25°C typical.

    UNISONIC TECHNOLOGIES CO., LTD 5 of 6


    www.unisonic.com.tw QW-R109-043.C
    UMD9114 Preliminary CMOS IC

     TYPICAL APPLICATION CIRCUIT

    UTC assumes no responsibility for equipment failures that result from using products at values that
    exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
    parameters) listed in products specifications of any and all UTC products described or contained herein.
    UTC products are not designed for use in life support appliances, devices or systems where malfunction
    of these products can be reasonably expected to result in personal injury. Reproduction in whole or in
    part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to
    make changes to information published in this document, including without limitation specifications and
    product descriptions, at any time and without notice. This document supersedes and replaces all
    information supplied prior to the publication hereof.

    UNISONIC TECHNOLOGIES CO., LTD 6 of 6


    www.unisonic.com.tw QW-R109-043.C

    You might also like