ADP Computer Science (Semester-1) Fall 2023

Course Title: Introduction to Information and communication Technologies Course Code: CGE-1
Time Allowed: 02:00 Hours Maximum Marks: 36
Name: ______ Roll No: ________
Objective Part
Question .No .1: Tick the correct answer. ( 6×1=6 )
1. Which of the following device is used to get soft copy output?
a) Printer b) Plotter c) Monitor d) speaker
2. CBT software is used in
a) Forecasting b) Education c) Manufacturing d) Farming
3. Which component of CPU is used to compare date?
a) ALU b) Control Unit c) Memory d) None
4. Which of the following is not a mouse event?
a) Left Click b) Right Click c) Drag d) Go
5. The normal/default orientation of page in MS word is?
a) Horizontal b) Landscape c) Portrait d) Vertical
6. Email stands for ?
a) Electric Mail b) Electronic Mail c) Elective Mail d) Elaborated Mail

Question No.2: Attempt the following Short Questions; ( 6 ×2=12¿

1. Differentiate between soft copy and hard copy
2. Why is data security important?
3. What is the purpose of Undo and Redo commands in MS word? How they are
used?
4. Why Binary Number system is important in Computer?
5. What is the use of data dictionary in databases?
6. What is volatile and non-volatile memory?

Subjective Part
Question No.3: Answer any TWO Questions. ( 2× 9=18 ¿
Q.NO.1: ( 5+4=9 )
a) Write a note on major components of Computer.
b) What is search engine? How information is searched using search
engines? Name five popular search engine.
Q.NO.2: ( 5+4=9 )
a) What is Boolean logic? Construct AND, OR and NOT gates table using
prepositions.
b) Convert the following into binary number system
i. (187)10
ii. (A68C)16
Q.NO.3: ( 5+4=9 )
a) What are security threats? Explain what are the ways to handle security threats?
b) What is software? Explain different types of software.
 ‫‪ADP Computer Science (Semester-1) Fall 2023‬‬
‫‪Course Title: Islamic Studies‬‬ ‫‪Course Code: HUM-131‬‬
‫‪Time Allowed: 02:00 Hours‬‬ ‫‪Maximum Marks: 36‬‬
‫______ ‪Name:‬‬ ‫________ ‪Roll No:‬‬
‫مندرجہ ذیل کثیراالنتخابی سواالت کے گرد دائرہ لگائیں‬
‫قرآن کی بنیادی تصورات کا مطالعہ کس فن میں کیا جاتا ہے؟‬
‫حدیث‬ ‫علوم القرآن‬ ‫فقہ‬ ‫سیرت‬
‫سورة الحجرات کی آیات کس پر توجہ مرکوز کرتی ہیں؟‬
‫قرآن کی تاریخ‬ ‫یوِم قیامت‬ ‫مومنوں کی‬ ‫معاشرتی اخالقیات‬
‫خصوصیات‬
‫سنت کا قانونی مقام ہے‪:‬‬
‫صرف علماء کے لیے جدید دور میں غیر‬ ‫اختیاری‬ ‫اس پر عمل کرنا‬
‫متعلقہ‬ ‫الزمی ہے‬
‫اسالمی اقتصادی نظام کس پر توجہ دیتا ہے؟‬
‫دولت کی منصفانہ تقسیم‬ ‫معاشرتی بہبود‬
‫سائنسی دریافت‬ ‫سیاسی طاقت‬
‫اسالمی فقہ پر تجویز کردہ کتابوں میں سے ایک ہے‪:‬‬
‫ایچ ایس بھٹیہ‬ ‫میر ولی ہللا‬ ‫محمد حمید ہللا‬ ‫) ایم زیا الحق‬
‫مکہ اور مدینہ میں نبی کی زندگی کا مطالعہ کیا جاتا ہے‪:‬‬
‫تعارِف قرآن‬ ‫اسالمی قانون‬ ‫ِتت مقدس ت‬
‫نبی‬ ‫سیر خ‬ ‫علوم الحدیث‬
‫‪×2‬‬ ‫‪ ‬م ن درج ہ ذی ل سواالت کے صر واب ات حریر کری ں۔‬
‫ج‬ ‫م‬
‫‪12=6‬‬
‫‪ .1‬قرآن کے حوالے سے "ادب النبی" کے تصور کی وضاحت کریں۔‬
‫‪ .2‬اسالمی قانون کے چار بنیادی ذرائع کا ذکر کریں۔‬
‫‪ .3‬سورة الحشر کی آیات میں "تفکر" اور "یوِم قیامت" کی اہمیت کی وضاحت کریں۔‬
‫‪ .4‬حدیث اور سنت کے درمیان فرق کریں۔‬
‫‪ .5‬حدیث کی مختلف قسمیں کیا ہیں؟‬
‫"تدبر" کے تصور کی وضاحت کریں۔‬ ‫ت‬ ‫‪ .6‬قرآن کے حوالے سے "تفکر" اور‬
‫‪×2‬‬ ‫‪ ‬م ن درج ہ ذی ل می ں سے دو سواالت کے واب ات حریر کری ں۔‬
‫ج‬
‫‪18=9‬‬
‫سورہ محمد میں بیان کردہ مومنوں کی اہم خصوصیات کا ذکر کریں۔‬ ‫‪ .1‬الف)‬
‫مکہ مکرمہ میں حضور نبی اکرم ﷺ کی زندگی کا مختصر تعارف دیں۔‬
‫ًا‬ ‫ب)‬
‫‪.2‬‬
‫‪.2‬‬
‫‪.2‬‬
‫‪.2‬‬
‫‪.2‬‬
‫‪.2‬‬
‫الف) اسالمی معاشرتی نظام کے تصور کی مناسب مثالوں کے ساتھ وضاحت کریں۔‬
‫سنت کے قانونی مقام اور اسالمی قانون میں اس کے کردار پر بحث کریں۔‬ ‫ب)‬
‫الف) اسالمی تہذیب کے تصور اور اس کی اہمیت‬ ‫‪.3‬‬
‫ًا‬
‫کی مختصر وضاحت کریں۔‬
‫اسالم اور سائنس کے درمیان تعلق کی مناسب مثالوں کے ساتھ وضاحت کریں۔‬ ‫ب)‬
‫)‪ADP Computer Science (Semester-I‬‬
‫)‪Course Title: Calculus and Analytic Geometry (GE-103‬‬
‫‪Time Allowed: 02:00 Hours‬‬ ‫‪Maximum Marks36‬‬
 Name: Roll No:
1) Select the correct option .(6 × 1=6)
i. The function y=log e x is called Common
(a) common (b) Natural (c) a∧b (d) ¿

a
ii. lim =¿ ¿
x→ ∓∞ x
(a) ∓ ∞ (ba (c) does not exist (d) 0
iii. What is the point of discontinuity for signum function?
(a) x=1 (b ¿ x=−1(c) x=0 (d)Function is continuous on R
iv. If f is continuous on closed interval [a , b] and N is a number between f (a) and f (b),
then there exist c belong [a , b] such that f ( c ) =N is :
(a) Rolle’s Theorem ( b )Intermediate value theorem
( c ) Extreme Value Theorem (d ) ¿
v. The derivatives of log |x|is
1 1
( a ) , x> 0 ( b ) , x ≠ 0 ( c ) both ( a )∧( b )( d ) doesnot exist
x x
vi. What isthe relation between f (a)∧f (b)according ¿ Rolle ’ s theorem ?
(a) ¿ (b) ¿ (c) ¿ (d) ¿

2) Give the solutionof following short questions .(6 × 2=12)

i) Define real∧complex numbers∈detail .
ii) Write indeterminate form .
iii) Define convexity ∧concavity .
iv) State Mean Valuetheorem .
v) State Roll’ s Theorem .
vi) Why we integration|.
Attempt only two questions ¿ this section .(2 × 9=18)
1
( x−1)
3) ( a ) Solvelim x .
x →1

(b) Solve∫ x lnx dx .

n

(2 x) (2 x)
4) (a) Differentiate arctan 2
w . r .t arcsin .
(1−x ) (1+ x 2 )
1
(b) If f ( x )=x ( x−1 ) ( x −2 ) , a=0 , b= find c of MVT .
2
5) solve ( 5 + 4 = 9)
(a) Differentiate w .r . t x y=(tanx)cotx +(cotx)tanx .
sin 2 x
(b) Solvelim (cotx) .
x→ 0
 B.S Computer Science (Semester-I)
Course Title: Basic Electronics [CSC-1]
Time Allowed: 02:00 Hours Maximum Marks: 36
Name: ______ Roll No: ________
_________________________________________________________
Question No.1: Tick or Encircle the Correct Answer. (1×6=6 ¿
i) When a diode is reverse biased, then its resistance is of the order of:
(a) Ohms (b) Mega ohms (c) Kilo ohms (d) Micro ohms
ii) The direction of current through the load resistance of a full wave rectification circuit:
(a) Inverts for positive cycle (c) Inverts for negative cycle
(b) Changes for every cycle (d) Remains constant
iii) Half wave rectifier is a _______ circuit:
(a) Clipper (b) Clamper (c) Dual (d) Shunt
iv) Rectification is possible by:
(a) Transistor (b) Amplifier (c) Diode (d) Capacitor
v) Circuit used to convert pulsating D.C into pure D.C is called:
(a) Rectifier (b) Inverter (c) Converter (d) Filter
vi) The time period of output ripple of a full wave rectifier is 40msec, what will be the input A.C
frequency of this rectifier circuit:
(a) 100 Hz (b) 50 Hz (c) 25 Hz (d) 12.5 Hz

Question No.2: Attempt the following Short Questions. (6×2=12¿

i) Explain NAND Gate.
ii) Explain three regions of transistor.
iii) What is LED?
iv) What is difference between N type and P type semiconductors?
v) What is difference between insulator and conductor?
vi) What is distinguish between common collector configuration and common base configuration of
transistor?
Note: Attempt any two (02) Long Questions.
Question No.3: (04+05=09)
(a) What is an amplifier? Explain the working of transistor.
(b) The current flowing into the base of a transistor is 100 μA. Find its collector current, emitter current and
their ratio I c /I E, if the value of current gain is 100.
Question No.4: (04+05=09)
(a) What is PN junction? Discuss the characteristics of PN Junction in details.
(b) In a certain circuit, the transistor has a collector current of 10 mA and a base current of 40 μA . What is
the current gain of transistor?
Question No.5: (04+05=09)
(a) What is rectification? Write detail note on full wave rectification.
(b) What is Exclusive-OR gate? Explain in details.
 B.S Computer Science
Course Title: Programming Fundamental
Time Allowed: 02:00 Hours Maximum Marks: 36
Name: ______ Roll No: ________
_________________________________________________________
Question No.1: Tick or encircle the correct answer. (1×6=6 ¿
i) Each element of array has its own:
(a) Member name (b) Index (c) Upper bound (d) Dot operator
ii) Which of the following is a valid C++ array definition?
(a) Void n[5]; (b) int arr[20]; (c) int arr[int]; (d) none
iii) A loop within a loop is called:
(a) Nested loop (b) Complex loop (c) Infinite loop (d) Dual loop
iv) The while loop is a _______ type of loop:
(a) Pre-test (b) No-test (c) Pre-qualified (d) Post-test
v) The code under this statement is executed when the input does not match to any case in switch
statement.
(a) Break (b) default (c) case (d) switch
vi) If ‘a’ is an integer variable then statement a=5/2; will return a value:
(a) 2 (b) 2.5 (c) 5 (d) 2.0
Question No.2: Attempt the following short questions. (6×2=12¿
i) What will happen if iostream.h file is missing in a C++ program?
ii) What are logical errors? When and why does it occur?
iii) Describe two forms of increment operator?
iv) What is the use of AND operator? Give an example.
v) How are members of structure accessed?
vi) What is function call?
Note: Attempt any two (02) long questions.
Question No.3: (09)
(a) Write a program that inputs a number from the user and find its factorial recursively.
Question No.4: (09)
Write a program that inputs integer values in a 4 x 4 matrix and display the sum of diagonal elements of
the matrix.
Question No.5: (09)
Write a program that inputs five integers from the user and stores them in an array, it then displays all
values in the array using loop.
 B.S Computer Science (Semester-I)
Course Title: Basic Electronics [CSC-1]
Time Allowed: 02:00 Hours Maximum Marks: 36
Name: ______ Roll No: ________
_________________________________________________________
Question No.1: Tick or Encircle the Correct Answer. (1×6=6 ¿
i) When a diode is reverse biased, then its resistance is of the order of:
(b) Ohms (b) Mega ohms (c) Kilo ohms (d) Micro ohms
ii) The direction of current through the load resistance of a full wave rectification circuit:
(c) Inverts for positive cycle (c) Inverts for negative cycle
(d) Changes for every cycle (d) Remains constant
iii) Half wave rectifier is a _______ circuit:
(b) Clipper (b) Clamper (c) Dual (d) Shunt
iv) Rectification is possible by:
(b) Transistor (b) Amplifier (c) Diode (d) Capacitor
v) Circuit used to convert pulsating D.C into pure D.C is called:
(b) Rectifier (b) Inverter (c) Converter (d) Filter
vi) The time period of output ripple of a full wave rectifier is 40msec, what will be the input A.C
frequency of this rectifier circuit:
(b) 100 Hz (b) 50 Hz (c) 25 Hz (d) 12.5 Hz

Question No.2: Attempt the following Short Questions. (6×2=12¿

vii) Explain NAND Gate.
viii) Explain three regions of transistor.
ix) What is LED?
x) What is difference between N type and P type semiconductors?
xi) What is difference between insulator and conductor?
xii) What is distinguish between common collector configuration and common base configuration of
transistor?
Note: Attempt any two (02) Long Questions.
Question No.3: (04+05=09)
(c) What is an amplifier? Explain the working of transistor.
(d) The current flowing into the base of a transistor is 100 μA. Find its collector current, emitter current and
their ratio I c /I E, if the value of current gain is 100.
Question No.4: (04+05=09)
(c) What is PN junction? Discuss the characteristics of PN Junction in details.
(d) In a certain circuit, the transistor has a collector current of 10 mA and a base current of 40 μA . What is
the current gain of transistor?
Question No.5: (04+05=09)
(c) What is rectification? Write detail note on full wave rectification.
(d) What is Exclusive-OR gate? Explain in details.