Scribd
Upload
50 views4 pages

IPC Assignment 2 Manish Sir

1 st order system

Uploaded by

harshbhanushali0905
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views4 pages

IPC Assignment 2 Manish Sir

1 st order system

Uploaded by

harshbhanushali0905
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

IPC : 1st order system || assignment -02

by Manish Rajput Sir (MR100)

Q.1) The Initial value ( t= 0+) of the unit step response for the
(𝑠+1)
transfer function is,……..
(2𝑠+1)

Q.2) The unit impulse response of a first order process is given by


2e-0.5t. The gain and time constant of the process are respectively
, ………………
Q.3) A thermocouple having linear relationship between 0˚C and
350˚C shows an emf of zero and 30.5 mV respectively at these
two temperatures. If the cold juncture temperature is shifted
from 0˚C to 30˚C , then the emf correction (in mV) is ?
Q.4) A thermometer having a time constant of 0.1 min is at
steady state temperature of 90˚F. At time t = 0, The
thermometer is placed in a temperature bath & maintained at
100˚F. Determine the time needed for the thermometer to read
98˚F.
Q.5) A process is initially at steady state with its output y=1 for
an input u(t) = 1. The input is suddenly changed to 2 at a time t =
0. The output response is y(t) = 1 + 2t. The transfer function of
the process is ?
Q.6) For a tank of area 3ft2 , the outlet flowrate (qout = ch1/2) , the
steady state liquid level in tank is 4ft. There is step change in
𝐻(𝑠)
feed from 16 cfm to 20 cfm . Then transfer function is ?
𝑞𝑖𝑛(𝑠)

1 Manish Rajput Sir : +91-8399972875, Referral Code : MR100


Join Telegram for discussion: http://t.me/ManishSirChemicalEngg_Gate
IPC : 1st order system || assignment -02
by Manish Rajput Sir (MR100)

Q.7) A first order system with process gain 4 and time constant 3
is subjected to an impulse input of strength 6 at t = 0. The value
of the output response at t=0+ will be ?
Q.8) A system having transfer function G(s) = 1/(s+2) is existed
with input 10 u(t). The time (in sec) at which the output reaches
99% of it's steady state value will be ?
Q.9) What is steady state stable output of the transfer function
𝑠
for a unit slope ramp input?
(𝑠+1)(𝑠+2)
𝑌(𝑠) 1
Q.10) A first order system with transfer function G(s) = =
𝑋(𝑠) 𝑠+1
is subjected to input X(t)=t what is maximum difference between
input and output?
Q.11) A certain thermocouple has a specific time constant of
1sec. If the process temperature changes abruptly from 700˚C to
900°C then temperature reacting system in an indicator attached
to the thermocouple after 5sec will be ?
Q.12) Time required for the output of a first order system to
change from a given value to 63.2% of its final value when a step
change of input is made, is called ?
Q.13) A thermometer of time constant 10 sec, Initially at 30°C, is
suddenly immersed into water at 100°C. How long it takes for
the thermometer to reach 90°C?

1 Manish Rajput Sir : +91-8399972875, Referral Code : MR100


Join Telegram for discussion: http://t.me/ManishSirChemicalEngg_Gate
IPC : 1st order system || assignment -02
by Manish Rajput Sir (MR100)

Q.14) Consider a unit step input to a first order system given by


Kp/(2s +4 ). If the initial rate of response of the system is given
as 5 units/sec, find the value of Kp.
Q.15) A thermometer at 300˚C is placed in bath at 900°C.The
initial rate of rise in thermometer temperature is found to be
20°C/sec. What will be the time constant (in min) of the
thermometer assuming it is a first order device with unity steady
state gain.
Q.16) If Laplace transform of a function is, in the time domain, as
t, the final value of the response is ? (enter answer rounded up
to 1 decimal place)
Q.17) A thermometer of time constant 10 second, initially at
30°C, is suddenly immersed into water at 100°C. How long (in
sec) will take for the thermometer reading to reach 90°C ?
Q.18) If u(t) is the unit step function, Then Laplace
transformation of f(t) = 4sin (t-3) u(t-3) is
Q.19) A first order ……………….. by sinusoidal change in input with
non-zero amplitude. Then the ratio of response of output
amplitude to input amplitude will be -………..
Q.20)The thermometer initially at 100˚C is dipped at t = 0 into an
oil bath maintained at 150˚C. If the recorded temperature is
130˚C after 1 min, that the time constant of thermometer (in
min) is …………….

1 Manish Rajput Sir : +91-8399972875, Referral Code : MR100


Join Telegram for discussion: http://t.me/ManishSirChemicalEngg_Gate
IPC : 1st order system || assignment -02
by Manish Rajput Sir (MR100)

1 Manish Rajput Sir : +91-8399972875, Referral Code : MR100


Join Telegram for discussion: http://t.me/ManishSirChemicalEngg_Gate

You might also like