Scribd Logo
Upload

Welcome to Scribd!

  • 7 views

    Bluetooth Pairing Instructions 95954

    Uploaded by

    thenathansamson
    pairing instructions

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bluetooth Pairing Instructions 95954

    Uploaded by

    thenathansamson
    7 views2 pages
    pairing instructions

    Original Title

    Bluetooth-pairing-instructions-95954

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    pairing instructions

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    7 views2 pages

    Bluetooth Pairing Instructions 95954

    Uploaded by

    thenathansamson
    pairing instructions

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Pairing Procedure

    English
    Requirements
    A Bluetooth compatible mobile phone is required.(check www.honda-access.com)
    To receive or make calls, the mobile phone must be inside the vehicle with as
    little physical barrier between the mobile phone and the Bluetooth module unit.

    Pairing Procedure
    * NOTE: For your safety, this procedure should not be attempted while
    driving the vehicle.

    Connecting to the mobile phone for the first time


    1. When the ignition is turned on ,“Honda Car Kit” text will be displayed on
    the screen.

    2. Turn the scroll wheel to select the “Pairing Mode”, and then access it by
    pressing the scroll wheel.

    !
    Pairing Mode

    3. Set your mobile phone to in discovery mode to “discover” this unit by


    following your mobile phone instruction.

    Honda Mobile

    OK

    * NOTE: Please follow the Bluetooth pairing procedure in your mobile phone
    Owner’s Manual.
    7
    Pairing Procedure
    English

    4. Search for the device on the mobile phone. When the search is completed
    the mobile phone should display Honda Car Kit_xxxxxx followed with a
    few numbers. Confirm this by pressing “yes” or “OK”.

    5. At this time the device should ask for a pin number, enter 0000. After
    pairing, your mobile phone name should appear on the main screen.

    PIN: 0000 Honda Mobile

    6. If the system fails to pair with your mobile phone , recheck your mobile
    phone Owner’s Manual and repeat the above procedure .

    * NOTE: If phone call is busy, the connection will pair automatically, and then it
    will switch from mobile phone to the system when ignition is on.
    (depends on mobile phone you used)

    Connection Requirements
    • Before using, you must pair your mobile phone with the Bluetooth Hands-
    free telephone system.
    • If the ignition switch is on, and you move your Bluetooth mobile phone out
    of range from Bluetooth module , the connection will switch to the mobile
    phone and the system will automatically start searching approximately
    twenty seconds after the pairing is disconnected.
    • When the ignition is turned off, the vehicle Bluetooth connection is lost.
    However, the mobile phone will continue the communication.

    You might also like