6 5 4 3 2 1

ITEM QTY PART NUMBER DESCRIPTION MATERIAL MASS

1 1 GS-0046-1 RUBBER 90 DURO N/A 0,1 kg

70 2 1 GS-0046-2 WASHER STEEL N/A 0,1 kg

3 1 JSFA-CBHD08-016G08 BOLT 1/2" UNC x 1" N/A 0,1 kg

D D
ITEM 1-RUBBER 90 DURO; Qty: 1
Material: Rubber
24
70

64
21

21
C C
6

14
SPOT WELD BOLT
IN PRIOR TO MOULDING 35

ITEM2-WASHER STEEL; Qty: 1

Material: PL-6mm(SS400)(VPL0060M01)
(6)

1 64
35

B B
6
54

3
2
1/2" UNC 13,1

3
-- Initial issue 09/01/2018 HT DB
REV DESCRIPTION DATE BY APPRO
ALL SHARP EDGES TO BE REMOVED OVER TITLE:
NOMINAL 0 6 30 120 400 1000 TOTAL WEIGHT
0.5
A JACON APPROVAL /DEBURRED. ALL WELD SPATTER TO BE
REMOVED. SIZE TO 6 30 120 400 1000 2000 BOOM STOPPER (Kgs):
A
UNLESS OTHERWISE SPECIFIED DIMENSIONS DRAWN HT 09/01/2018
MACHINED +/- 0.1 0.1 0.2 0.2 0.5 1 PROJECT:
09/01/2018
Date :....................................
ARE IN MILIMETERS. THE TOLERANCES ON
DIMENSIONS FOR WHICH NO LIMITS ARE GIVE
SHALL BE SHOWN AS BELOW FABRICATED +/- 1 1 2 2 3 4 GENERAL STOCK GS CHK'D NT 09/01/2018 SCALE: 1:2
2018.01.10 JACON
INTERNATIONAL
DRAWING No.:
11:27:23 +07'00' THIS DRAWING AND THE INFORMATION CONTAINED HERE IN IS THE PROPERTY OF JACON PTE. LTD.
Sign :..................................... INTERNATIONAL PTE. LTD. AND MUST NOT BE COPIED, REPRODUCED OR USED WITHOUT THE
WRITTEN PERMISSION OF JACON INTERNATIONAL PTE. LTD.
GS-0046 REV: -- APP' D DB 09/01/2018 SHEET: 1 / 1

6 5 4 3 2 1
\\Engineer-005\f\Dropbox (Jacon Technologies)\VPS INTERACTIVE JOB\GMV-3D DRAWING\GENERAL STOCK\GS-0046.idw