Scribd
Upload
12 views13 pages

OptimizationAssignment 01FE20BME113

Uploaded by

Amrut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views13 pages

OptimizationAssignment 01FE20BME113

Uploaded by

Amrut
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

USN:01fe20bme113 roll no: 126 Name: Amrut Nuli

Optimization Methods Assignments

1. To perform size optimization on


the given model to minimize the
volume

1) Upper_Case_11

Solution:
1. Element description – 2D shell elements (quad & tria)
Global element size = 2
Number of elements =2909
Number of nodes = 3083
2. I) Material – steel
E = 130000 MPa
G = 44000 MPa
NU = 0.34
RHO = 8.96 g/cc
II) Property – Thickness (PSHELL)
T = 1.5 mm
3. Assumed loading and Boundary conditions
Loads – At the top center in X, Y and Z direction, Magnitude = 1000 N
Boundary Conditions – Constraints at the bottom four corners with 1, 2 and 3 degrees of
freedom

4. Basic analysis results


Analysis performed – Static structural analysis
5. Optimization Results
6. Results and Conclusions
Displacement Analysis Optimization
X 0.0099 0.041
Y 0.0095 0.032
Z 1.4 3.1
Thickness 1.5 2.86

2. To perform topology optimization on the given model to decrease the volume.

2. Solid_Brkt_Cast

Solution:

Element description – 3D solid elements (tetra mesh)


Global element size = 5
Number of elements =35553
Number of nodes =9049

1. I) Material – Aluminium
E = 70000 MPa
G = 25000 MPa
NU = 0.33
RHO = 2.7 g/cc
II) Property – PSOLID
2. Assumed loading and Boundary conditions
Loads – At the top center in X, Y and Z direction, Magnitude = 1000 N
Boundary Conditions – Constraints at the bottom two holes with 1, 2, 3, 4, 5 and 6 degrees of
freedom
3. Basic analysis result

4. Optimization Results
5. Results and Conclusions

Displacement Analysis Optimization


X 0.0008 0.0201
Y 0.0002 0.0005
Z 0.0023 0.0602
Volume 440593.167 mm3 48861.6 mm3

3. To perform topography optimization on the given model to increase the


first natural frequency.

3. Bin_bottom_Bracket_11
Solution:
1. Element description – 2D shell elements (quads + trias)
Global element size = 10
Number of elements =11608
Number of nodes = 11850
2. I) Material – Steel
E = 210000 MPa
G = 80769.2 MPa
NU = 0.3
RHO = 7.85 g/cc
II) Property – Thickness (PSHELL)
T = 1.0 mm
3. Assumed loading and Boundary conditions
Loads – At the top center in X and Z direction, Magnitude = 1000 N
Boundary Conditions – Constraints at the bottom four corners with 1, 2 and 3 degrees of
freedom

4. Basic analysis results

Forced Modal analysis


5. Optimization Results
6. Results and Conclusions
Modes Analysis (Hz) Optimization (Hz)
1 3000.110 3003.16
2 3000.796 3014.42
3 3000.812 3058.14
4. To perform size optimization on the given model to minimize the volume.

4. Lower_Case_11

Solution:

1. Element description – 2D shell elements (quads + trias)


Global element size = 3
Number of elements =2698
Number of nodes = 2916
2. I) Material – Aluminium
E = 68000 MPa
G = 25000 MPa
NU = 0.32
RHO = 2.7 g/cc
II) Property – Thickness (PSHELL)
T = 2 mm
3. Assumed loading and Boundary conditions
Loads – At the top center in X and Z direction, Magnitude = 1000 N
Boundary Conditions – Constraints at the bottom four corners with 1, 2, 3, 4, 5 and 6 degrees
offreedom
4. Basic analysis results
Analysis performed – Static structural analysis
5. Optimization Results

1. Results and Conclusions


Displacement Analysis Optimization
X 0.605 0.1153
Z 0.1949 0.1330
Thickness 2.0 2.582
5. To perform topography optimization on the given model to increase the
first natural frequency.

5 .Bin_bottom_Bracket_11

Solution:
1. Element description – 2D shell elements (quads + trias)
Global element size = 10
Number of elements =9173
Number of nodes = 9367
2. I) Material – Zinc
E = 121000 MPa
G = 35000 MPa
NU = 0.225

RHO = 7.13 g/cc


II) Property – Thickness (PSHELL)
T = 3.0 mm
3. Assumed loading and Boundary conditions
Loads – At the top center in Y direction, Magnitude = 1000 N
Boundary Conditions – Constraints at the bottom four corners with 1, 2 and 3 degrees of
freedom
4. Basic analysis results
Analysis performed – Forced Modal analysis

5. Optimization Results
6. Results and Conclusions

Mode Analysis Frequency Optimization Frequency


1 3.00943E+03 3.011536E+03
2 3.001086E+03 3.017020E+03
3 3.002932E+03 3.027115E+03
4 3.023986E+03 3.034455E+03

You might also like