Scribd
Upload
143 views29 pages

CE 206 - Introduction To Construction Materials and Testing

Uploaded by

HOWELL KIM VENTOSA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
143 views29 pages

CE 206 - Introduction To Construction Materials and Testing

Uploaded by

HOWELL KIM VENTOSA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 29

TECHNOLOGICAL INSTITUTE OF THE

PHILIPPINES - MANILA
CIVIL ENGINEERING DEPARTMENT

CE 206 - INTRODUCTION
TO CONSTRUCTION
MATERIALS AND TESTING

PRESENTED BY: ENGR. HOWELL KIM H. VENTOSA


INTENDED LEARNING OUTCOMES
(ILOs)

Identify and categorize fundamental construction materials, demonstrating


an understanding of their basic properties and applications in the
construction industry.
Apply testing techniques to assess the mechanical, thermal, and durability
characteristics of construction materials, interpreting the results to inform
material selection and performance considerations.
Analyze the implications of using different construction materials and testing
methods in diverse contexts, evaluating their impact on structural integrity,
sustainability, and cost-effectiveness in construction projects.
CONSTRUCTION MATERIALS

Materials engineers are responsible for the selection,


specification, and quality control of materials to be used in a
job. These materials must meet certain classes of criteria or
materials properties (Ashby and Jones, 2011).
CONSTRUCTION MATERIALS

Economic Factors
Mechanical Properties
Non-mechanical Properties
Production/Construction Considerations
Aesthetic Properties
CONSTRUCTION MATERIALS

Material testing pertains to the evaluation of materials


(any kind of building materials) that affects or impacts the
ongoing project.
Another importance of this process is that it can help
avoid back jobs or expensive renovations to correct the
errors and alleviate risks to other people or property.
TYPES OF TESTING

Commercial Testing

Materials are already existing.


Determine if these materials comply with the given
technical specifications and will fall within the required
parameters
TYPES OF TESTING

Scientific Testing

Materials are tested to obtain their vital and beneficial


properties and determine how it can be advantageous in
building a certain structure.
TYPES OF TESTING

Materials Research

Researches are being conducted for existing equipment


to have better understanding of its usage.
EXPERIMENTATION VS TESTING

Experimentation Testing

This is when the result is This is more defined


uncertain that new procedure which are the
insight are to be gained limits and results are
clear.
DESTRUCTIVE TESTING

Materials are being tested up to its


breaking point or until the material
fails. It is said that this testing
procedure is much easier to
conduct because it results to more
information regarding the material
properties.
NON-DESTRUCTIVE TESTING

This is the exact opposite


of destructive testing. It is
commonly used when the
materials to be tested are
still in service.
SPECIFICATIONS

It is a precise statement of a set of requirements, to be


satisfied by a material, product, system or service. It is
desirable that the requirements, together with their limits,
should be expressed numerically in appropriate units.
STANDARD SPECIFICATIONS

A standard specification for a material is the result of


agreement between those concerned in a particular field and
involves acceptance for use by participating agencies.
STANDARDIZING AGENCIES AND
RELEVANT STANDARDS

Turkish Standards Institute (TSE)


American Society for Testing and Materials (ASTM)
International Standards Organization (ISO)
European Committee for Standardization (CEN)
FAMILIARIZATION OF TESTING
EQUIPMENT
Compression Machine
This equipment is used to test the
behavior of a concrete sample while
compressive loads are being applied on
it. Some of the results obtained are its
compressive strength, yield strength,
ultimate strength, elastic limit, etc.
FAMILIARIZATION OF TESTING
EQUIPMENT
Slump Test Equipment
This equipment is used to measure
the consistency of the concrete
before it sets. The workability of the
concrete can also be determined
through this test. An improperly mixed
batch can be known with this
procedure.
FAMILIARIZATION OF TESTING
EQUIPMENT
Sieve Shaker

This equipment is used to analyze the


particles of sample aggregates as it is
sifted according to its sizes.
ENGINEERING PROPERTIES

Considered broadly, are physical, chemical, and biological


characteristics that are observable, measurable, and
influence behavior to the extent that they are important in
engineering analyses and design, and in performance of
components, systems, or processes.
PHYSICAL PROPERTIES

Any property that is measurable, whose value describes a


state of a physical system.

Bulk Unit Weight and Voids


Specific Gravity
Particle Shape and Surface Texture
Absorption and Surface Moisture
BULK UNIT WEIGHT AND VOIDS

It pertains to the weight of aggregate required to fill a specific


amount of volume. This is essential for the balanced mixture
of Portland Cement Concrete.
SPECIFIC GRAVITY

It is the weight of the material divided by the weight of an


equal volume of water.
PARTICLE SHAPE AND
SURFACE TEXTURE

It is the appearance of an aggregate like shape and texture


determines how well it will contain into a dense formation and
determines the movement of it in mixture.
ABSORPTION AND SURFACE
MOISTURE

When used in concrete:


It is said that the amount of water absorbed by the
aggregates is important in the design of Portland Cement
Concrete.
ABSORPTION AND SURFACE
MOISTURE

When used in asphalt:


The more absorption the aggregates get, the greater amount
of asphalt binder will be required. Hence, mixture will be less
economical.
CHEMICAL PROPERTIES

A chemical property is any of a material's properties that


becomes evident during, or after, a chemical reaction; that is,
any quality that can be established only by changing a
substance's chemical identity.
CHEMICAL PROPERTIES OF CEMENT

The raw materials for cement production are limestone


(calcium), sand or clay (silicon), bauxite (aluminum) and iron
ore, and may include shells, chalk, marl, shale, clay, blast
furnace slag, slate. Chemical analysis of cement raw materials
provides insight into the chemical properties of cement.
SILICA FUMES

Silica fume is added to cement concrete in order to improve a


variety of properties, especially compressive strength,
abrasion resistance and bond strength.
MECHANICAL PROPERTIES

These are physical properties that a material exhibits upon


the application of forces.

Compressive Strength
Flexural Strength
Tensile Strength
Shrinkage
Shear Strength
STRESS-STRAIN RELATIONSHIP

When we study solids and their


mechanical properties,
information regarding their elastic
properties is most important. We
can learn about the elastic
properties of materials by
studying the stress-strain
relationships, under different
loads, in these materials.

You might also like