Data Sheet

Series B
Electronic Metering Pumps
Configuration Data
Model B92 1 - 392SI

Control & Output Code with Standard Liquid End

Manual Control
Speed (stroking frequency) and stroke
length manually adjustable.
B11 -- 1.6 GPH (6.1 l/h) --- 150 psi (10.30 Bar)
B12 -- 2.5 GPH (9.5 l/h) --- 100 psi (6.90 Bar)
B13 -- 4.5 GPH (17.0 l/h) --- 50 psi (3.4 Bar)
B14 -- 7.0 GPH (26.5 l/h) --- 30 psi (2.07 Bar)
Instrument Responsive/Manual Control
Manual adjustment features of Series B1
plus switch conversion to external control
for automatic systems.
B71 -- 1.6 GPH (6.1 l/h) --- 150 psi (10.30 Bar)
B72 -- 2.5 GPH (9.5 l/h) --- 100 psi (6.90 Bar)
B73 -- 4.5 GPH (17.0 l/h) --- 50 psi (3.4 Bar)
B74 -- 7.0 GPH (26.5 l/h) --- 30 psi (2.07 Bar)
B91 -- 1.6 GPH (6.1 l/h) --- 150 psi (10.30 Bar)
B92 -- 2.5 GPH (9.5 l/h) --- 100 psi (6.90 Bar)
B93 -- 4.5 GPH (17.0 l/h) --- 50 psi (3.4 Bar)
B94 -- 7.0 GPH (26.5 l/h) --- 30 psi (2.07 Bar)
Dimensions
Voltage Code
1 ------ 120 VAC, US Plug
2 ------ 240 VAC, US Plug
3 ------ 220-240 VAC, DIN Plug
5 ------ 240-250 VAC, UK Plug
6 ------ 240-250 VAC, AUST/NZ Plug
7 ------ 220-240 VAC, SWISS Plug

Liquid End
See next page for complete liquid end
specifications and selection.

Specifications
Strokes Per Stroke Length
Minute (Adjustable) Average
(Adjustable) Recommended Input Power Shipping
Series Min Max Minimum @Max Speed Weight
B11, B71, B91
B12, B72, B92
1 100 10% 29 watts 15 lbs (6.9 kg)
B13, B73, B93
B14, B74, B94

201 Ivyland Road

Ivyland, PA 18974 USA
TEL: (215) 293-0401
FAX: (215) 293-0445
http://www.lmipumps.com
Polyprel is a registered trademark of Milton Roy Company. Flourofilm and Liquifram are trademarks of Milton Roy Company Replaces same of Rev.I 6/09
© 2005 Milton Roy Company - All Rights Reserved
1417.J 02/2011
Standard Liquid End Configuration Data & Materials of Construction
Drive Liquid Materials of Construction
Assembly End No. Size Code Head & Fittings Balls Liquifram™ Check Valve Accessory Tubing & Connections
498SI† 0.9 PVC/PVC Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D.
B91 - 490SI† 0.9 Acrylic/PVC Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D.
B92 - 499SI† 0.9 Acrylic/PVDF PTFE Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D.
B71 - 398SI† 0.9 PVC/PVC Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D.
B72 - 393SI† 0.9 PVDF/PVDF Ceramic Fluorofilm™ PVDF/PTFE 4FV PE .375" O.D.
B11 - 392SI† 0.9 PVDF/PVDF Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D.
B12 - 85HV 0.9 Polypropylene 316 S.S. Fluorofilm™ PTFE PE .5" O.D. Vinyl .938" O.D.
86HV 0.9 Acrylic/PP 316 S.S. Fluorofilm™ Viton® PE .5" O.D. Vinyl .938" O.D.
495SI† 0.9 Polypropylene Ceramic Fluorofilm™ PTFE 4FV PE .375" O.D.
297 0.9 316 S.S. 316 S.S. Fluorofilm™ 316 S.S. Pipe 1/4" NPT M
468SI† 1.8 PVC/PVC Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D.
460SI† 1.8 Acrylic/PVC Ceramic Fluorofilm™ PVC/Polyprel® 4FV PE .375" O.D.
469SI† 1.8 Acrylic/PVDF PTFE Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D.
368SI† 1.8 PVC/PVC Ceramic Fluorofilm™ PVC/Polyprel® 4FV PE .375" O.D.
363SI† 1.8 PVDF/PVDF Ceramic Fluorofilm™ PVDF/PTFE 4FV PE .375" O.D.
B93 - 362SI† 1.8 PVDF/PVDF Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .375" O.D.
B73 - 465SI† 1.8 Polypropylene Ceramic Fluorofilm™ PTFE 4FV PE .375" O.D.
B13 - 75HV 1.8 Polypropylene 316 S.S. Fluorofilm™ PTFE PE .5" O.D. Vinyl .938" O.D.
76HV 1.8 Acrylic/PP 316 S.S. Fluorofilm™ Viton® PE .5" O.D. Vinyl .938" O.D.
277 1.8 316 S.S. 316 S.S. Fluorofilm™ 316 S.S. Pipe 1/4" NPT M
B94 - 312SI#† 3.0 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D.
B74 - 313SI#† 3.0 PVDF/PVDF .375 Ceramic Fluorofilm™ PVDF/PTFE 4FV PE .5" O.D.
B14 - 318SI#† 3.0 PVC/PVC .375 Ceramic Fluorofilm™ PVC/Polyprel® 4FV PE .5" O.D.
410SI#† 3.0 Acrylic/PVC .375 Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D.
415SI#† 3.0 Polypropylene Ceramic Fluorofilm™ PTFE 4FV PE .5" O.D.
418SI#† 3.0 PVC/PVC .375 Ceramic Fluorofilm™ PVC/Polyprel® 4FV PE .5" O.D.
419SI#† 3.0 Acrylic/PVDF .375 PTFE Fluorofilm™ PVDF/Polyprel® 4FV PE .5" O.D.
217 3.0 316 S.S. 316 S.S. Fluorofilm™ 316 S.S. Pipe 1/4" NPT M
#These liquid ends use 3/8" diameter valve balls. Pump output may be reduced in some applications. Size 3.0 liquid ends use the accessory type AutoPrime valve.
Output Information with Standard Liquid End
Gallons per Hour* Liters per Hour* mL/cc per Minute* mL/cc per Stroke Maximum
Series Min   Max Min   Max Min   Max Min   Max Injection Pressure
B11, B71, B91 0.002 1.6 0.006 6.1 0.10 101 0.10 1.01 150 psi (10.30 Bar)
B12, B72, B92 0.003 2.5 0.009 9.5 0.16 158 0.16 1.58 100 psi   (6.90 Bar)
B13, B73, B93 0.005 4.5 0.017 17.0 0.28 284 0.28 2.84 50 psi   (3.4 Bar)
B14, B74, B94 0.007 7.0 0.027 26.5 0.44 442 0.44 4.42 30 psi   (2.07 Bar)
*Minimum output is based on 1 stroke per minute and 10% stroke setting, minimum output can be reduced further in external mode. Series B9 pumps may be programmed for strokes per hour for lower outputs.

AutoPrimeTM Liquid End Configuration Data & Materials of Construction

Drive Liquid Size Materials of Construction
Accessory Tubing & Connections
Assembly End No. Code Head & Fittings Balls Liquifram™ Check Valve
B92, B91, B72 D90HI 0.9 Acrylic/PVC Ceramic Fluorofilm™ PVDF/Polyprel ®
4FV PE 0.375" O.D.
B71, B12, B11 D98HI 0.9 PVC/PVC Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE 0.375" O.D.
D60HI 1.8 Acrylic/PVC Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE 0.375" O.D.
B93, B73, B13
D68HI 1.8 PVC/PVC Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE 0.375" O.D.
D10HI 3.0 Acrylic/PVC Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE 0.5" O.D.
B94, B74, B14
D18HI 3.0 PVC/PVC Ceramic Fluorofilm™ PVDF/Polyprel® 4FV PE 0.5" O.D.
Output Information – AutoPrime TM
Liquid Ends (Liquid end models beginning with “D”)
Maximum Output Maximum Pressure
Series GPH Liters/hr mL/cc per minute mL/cc per stroke PSI Bar
B11, B71, B91 1.4 5.3 88.3 0.88 150 psi 10.3
B12, B72, B92 2.3 8.7 145.1 1.45 100 psi 6.9
B13, B73, B93 4.0 15.1 252.4 2.52 50 psi 3.4
B14, B74, B94 6.8 25.7 429.1 4.29 30 psi 2.07
AutoPrimeTM liquid ends have 3 check valves: suction on the bottom; discharge on the front; and autoprime bleed on the top. By design, a repeatable portion of the process fluid continuously bleeds through the top check valve to be
returned to the chemical supply. The result is the assurance that any gas in the head is automatically relieved thus eliminating air-binding. The maximum output per the tables above is reduced to account for the continuous bleed.

 ee front page for voltage code specifications.

S 3FV indicates that the pump is equipped with an LMI Three Function Fluorofilm™ is a copolymer of PTFE and PFA.
Plastic heads with tubing connection include ½" NPT and ½" BSP. Valve (pressure relief, priming aid, line drain). Polyprel® is an elastomeric PTFE copolymer.
† To specify ½" NPT male, change ‘I’ to ‘P’. 4FV indicates that the pump is equipped with an LMI Four Function
Polyprel is a registered trademark of the Milton Roy Company.
To specify black, UV resistant tubing, change ‘I’ to ‘U’. Valve. This diaphragm type, anti-syphon/pressure relief valve is
To specify 3FV, change ‘S’ to ‘T’. installed on the pump head. It provides anti-syphon protection Fluorofilm and Liquifram are trademarks of the Milton Roy Company.
and aids priming, even under pressure. Viton® is a registered trademark of E.I. DuPont Company.