Scribd
Upload
132 views6 pages

AMOS Commands

Uploaded by

kublamisho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
132 views6 pages

AMOS Commands

Uploaded by

kublamisho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

AMOS Commands

1. Verify Health Check


>lt all
>acc 0 startHealthCheck
>get 0 healthCheckResult

2. To check Alarm and Hardware Status


>alt

3. To check Alarm log history


>lga
>lga | grep –s20140501 –e 20140520
- alarm log specific time
- check log restart
C – Critical,M– Major,m– minor
* Clock calibration (clearance alarm)

4. Check License
>license key
>license lkf
>license server

5. Check UE attach to cell (eNodeB)


>ue print –admitted

6. Check Number of User (NodeB)


>get radio no
*Or can view using Node Status Analyzer

7. Check user (In RNC)


>lt all
>cedr | grep <node B cell id>
eg:
SDRN12>cedr | grep RW10263_2_3

8. View status Iub (In RNC)


>st iub
>get <proxy> - to view detail
9. Check Relation (neighboring cell) (eNodeB)
>pr relation
>pr EUtranCellRelation

10. Verify Hardware Status


>invh

11. Verify all Plugin Units


>st plugin
>get <proxy> - to view detail

12. Verify Gigabit Ethernet Link Connection Status


>st GigaBitEthernet / st giga
>get <proxy> - to view detail

13. To check IP Configuration in NodeB


>stip
( password: rbs)

14. To check Gigabit speed and duplex setting


>lget giga actualSpeedDuplex
>st giga
(1000M FullDuplex)

15. Check S1 interface connection (eNodeB)


>st mme

16. Check Sector status


>st sector
>get <proxy> -to view detail

17. Check eUtranCell status (eNodeB)


>st utrancell @ st cell (NodeB)
>get <proxy> -to view detail

18. Traffic Performance


>pmr
19. To check ENodeB product detail
>get 0
>get 1
20. To check NTP Frequency Synchronization (Clocking status)
>get Synchronization clock
>sts
>st IpSyncRef
*SYSTEM CLOCK: LOCK_MODE

21. Check DUS/RRUS HWstatus and VSWR


>cabx
( password: rbs)
Note: VSWR Value must below <1.5

22. Check Temperature of RRUS


>lh ru fui get temp
Normal operating temp. 40 to +50 C

23. Check RRUS for any faults (eNodeB)


>lhsh BXP_0_1 fm getfaults (Cell 1)
>lhsh BXP_1_1 fm getfaults (Cell 2)
>lhsh BXP_2_1 fm getfaults (Cell 3)

24. Check External Alarm port status and alarm slogan


>lget alarmport slogan | severity
>lst hwunit=sup-1,alarmport=[1-9]$
>lget hwunit=sup-1,alarmport=[1-9]$ alarm slogan
>get <pxoxy> - to display alarm details
>set <proxy> alarm slogan ‘cps fail’ - to set alarm text
>bl <proxy> - to block alarm port
>deb <proxy> - to deblock alarm port
eg: proxy =301
bl 301 ,
deb 301

25. To check and create system backup


>cvls
>cvms <cvname> <username> <comment>
>cvls
26. To Lock/Unlock MME (eNodeB)
>st mme
>bl mme
>st mme
>deb mme
>st mme

27. To Lock/Unlock eUtranCell (eNodeB)


>st fdd
>bl fdd
>st fdd
>deb fdd
>st fdd

28. To Lock/Unlock neighbouring eNodeB


>st termpoint
>bl termpoint
>st termpoint
>deb termpoint
>st termpoint

29. To check or reconfigure power of eNodeB


>get . configuredOutputPower
>set . configuredOutputPower 40
>bl fdd
>deb fdd
>get . maximumTransmissionPower
(40Watt for macro site)

30. To Lock/Unlock RRU (eNodeB) @ RU (NodeB)


>st rru / ru
>bl rru
>deb rru
>st rru

31. To Lock/Unlock DU
>st du
>bl du
>del du
32. To Restart RRU
>st rru
eg: proxy =320
>acl 320
>acc 320 restartunit
>acc 320 0 manualrestart

33. To Restart eNodeB


>acc 0 manualrestart

34. To check how long the site has been up and running
>uptime

35. To check eNodeB/NodeB restart logs


>llog

36. Node Performance


>getstat

37. Fetching and processing of node logs


>lgd - downtime log./History of node outages.
>lgx
>lgs - History of node/board/program restarts.
>lgo - History of MO write commands (set/action/create/delete)

38. To perform S1 link ping test


>facc ipaccesshostet ping <dst ip>
eg: facc ipaccesshostet ping 10.223.32.1

39. To perform continue ping test from traffic interface


>iacrh ping –dst <destination> ip> -src <source ip> -n <count>
eg: iacrh ping –dst 10.223.32.1 –src 10.157.80.185 –n 10

40. To perform trace route from traffic interface


>iacrh traceroute –dst <ip> -src <ip>
eg: iarch traceroute –dst 10.223.32.1 –src 10.157.66.1
(password: rbs)

You might also like