Be Sure

to Read this

Manual

Before Use

Operation Manual
www.universal-space.com
 CONTENT

Important Safety Instructions ........................................................................2

1.Specifications ............................................................................................4

2.Package Contents......................................................................................5

3.Set Up & Installation..................................................................................7

4. How to play............................................................................................. 16

5. Game Option .......................................................................................... 18

6. Maintenance and Inspection................................................................. 21

7. Overall Construction............................................................................... 22

1
Thank you for purchasing X BALL from UNIVERSAL SPACE. We hope you enjoy the
product.

This manual contains valuable information about how to operate and maintain your game
machine properly and safely. It is intended for the owner and/or personnel in charge of product
operation. Carefully read and understand the instructions.
If you need any help during installation and setup please utilize this manual and troubleshooting
guide. If the product fails to function properly, non-technical personnel should under no
circumstance attempt to service the machine. Contact your distributor or manufacturer for help.

Before use, please read IMPORTANT SAFETY INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

To ensure the safe usage of this product, carefully read and understand
these instructions before operating your game.
Save these instructions for future reference.

Use this product only as described in this manual. Other uses not recommended may cause fire,
electric shock or personal injury. Unplug the game from the outlet when not in use, when moving
from one location to another, and before cleaning/servicing.

Explanations which require special attention are indicated by signs of warning. Depending on the
potential hazardous degree, the terms: NOTE, NOTICE, and WARNING are used.

NOTE: A NOTE indicates useful hints or information about product usage.

NOTICE: A NOTICE indicates potential damage to product and how to avoid the problem.
WARNING: A WARNING indicates a potential for product damage or serious personal Injury.

It is important to understand the meaning of the following HAZARD SIGNS before continuing:
High Voltage and Shock Hazard:
High voltage can cause electric shock.
Turn off/unplug power before servicing.

High Temperature Hazard:

This part may cause scalding.
Do not touch. Surface may be hot.

2
No Touching Hazard:
This part may be hot or can cause electric shock.
Do not touch.

Use the following safety guidelines to help ensure your own personal safety and to help protect
your equipment and surrounding environment from potential damage.

This product is an indoor game machine. Do not install outdoors.

Avoid installing in the following places to prevent fire, electric shock, injury and/or
machine malfunctioning:

 Places subject to rain/moisture, or places subject to high humidity.

 Places subject to direct sunlight, or places subject to extremely hot or cold temperatures to
ensure that it is used within the specified operating range.
 Places where inflammable gas may be present or in the vicinity of highly
inflammable/volatile chemicals or items that can easily catch fire
 On unstable or sloped surfaces. The machine may topple or cause unforeseen accidents.
 Vicinity of fire exits, fire extinguishers etc that may block/prevent safety measures

WARNING

Non-technical personnel who do not have technical knowledge and

Expertise should refrain from performing such work that this manual
require or perform tasks which are not explained in this manual.
Failing to comply can cause severe accidents such as electric shock or
other serious injuries.

WARNING: To reduce the risk of fire, electric shock or personal injury,

unplug or disconnect the machine from the power supply before
servicing.

Note: The contents of this manual may be updated without notice.

3
1. SPECIFICATIONS

NOTICE: After turning off the game, please wait at least 1 minute before

restarting again

Rated power supply： AC220V-240V 50/60Hz

（1） Power consumption ： Min power consumption：260W
Max power consumption：300W
（2） Dimensions： W1880×D1240×H2252(mm)
（3） Weight ： ~160Kg
（4） Environment condition ：（Indoor） temperature ：-10
~+40

Humidity：≤90%

Note: Game parameters are subject to change without notice.

4
 2. PACKAGE CONTENTS
Open the package and make sure all the items are included:
 1 x Body Assembly

 Following accessories

NO. Part. NO Name Spec. Qty Illustration Note

1 X101-809-000 Power wire 10A/250V 2m 1

φ5-20mm
2 X101-424-000 Fuse T6.3A (125V) 1

3 X101-723-000 Manual English 1

4 X101-401-000 Key 171 4

5 X101-409-000 Coin key 2222 2

200

piece

(2 pack
6 X101-425-000 Rubber ball φ75 2
X

100 Ea)

Internal
7 X101-117-000 2
iron plate

5
 Connect
8 X101-118-000 4
board

9 X101-426-000 Bolt M6X15 4

10 X101-427-000 Bolt M6X20 24

1G
11 X101-428-000 U disk （resume 1
system）

12 X101-701-000 Header 1080X420（5δ） 1

13 X101-609-000 Mattress 1200X1070X35 1

If any items are found to be missing, please contact your sales representative for
help immediately.
NOTE: Part models are subject to change without notice.
6
3. SET UP & INSTALLATION

This product is an indoor game machine. Do not install outdoors.

 Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid

 Place the unit on a dry level surface
 Ventilation openings in the back of the unit must not be obstructed by objects or by wall.

3.1 Play Zone

This machine requires space for playing and for maintenance as shown below.
Leave space around the game upon installation:

Service area

The Machine

Operation area

（MM）

7
 Do not attempt to alter or transform any part of the machine. Use standardized
parts only. Use of inappropriate parts may damage the game and could be
hazardous as it may cause electric shock/fire.

3.2 Installation
Step 1：: Push together the 2 pieces of the cabinet to assemble the connection board. Fix from the
outside with bolts as shown in the picture.
Connect both the left and right pieces.

Step 2: Install the mattress on the slide board. Try to flatten the mattress and smooth out all
bumps. (Note: This mattress is used to absorb rebound force of the balls to prevent them
from bouncing out)

8
 Step 3： Install the internal iron plate. Secure both the left and right sides of the internal iron
plate. Fasten with bolts. (Note: Internal Iron Plate is used to keep the balls in the
center)

Fasten with Bolts

Ball Gate

Step 4： Open the side service door; connect the signal transport line connectors as shown
below.

9
 Step 5：Connect the light box power line connectors as shown in the pictures below.

Step 6：Install the light box. Tighten the screws from the back.

Installation complete! Check that all steps are completed correctly.

Before connecting the power (see Section 3.6).
10
3.3 Level Adjustment

Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the game.
If the game is installed on an unsuitable floor, it could cause a malfunction.

To fix the game, adjust the Leveler down until it touches the floor, lifting the casters off the ground
by 5mm. Repeat the same for all levelers.

Leveler Caster

About 5mm

Move Fix

NOTICE

Make sure the machine is level with the ground and all the

adjustable legs should stick to the floor closely.

3.4 Disassembly：
Important: Before disassembly, be sure the game power is off and the power plug is disconnected

Step 1: Remove the light box by loosening the screw in the back.

11
Step 2: Disconnect all light box connectors.

Open the service door; disconnect the signal line connector from the inside:

12
Step 3: Loosen the connect boards on both sides of the machine, and then separate the
cabinet.

Step 4：After separating the cabinet, pull out the mattress from one end of the machine.

Step 5：Unscrew and remove the internal iron plates (screws and bolts can be reused, keep and
store in a safe place for later use)

13
3.5 Transporting the Game

If you need to move the game, adjust the levelers back to an “up” position so the casters touch
the ground.

NOTICE
 Be careful not to damage the machine during transport.
 The machine should be handled with care when bringing it down from a higher level.
 Always unplug the game before moving.
 Keep the machine in upright position during transport.
 For longer distance transport, package the game properly to prevent damages

3.6 Connecting Power

WARNING: Check the voltage rating before you connect the equipment to an
electrical outlet to ensure that the required voltage and frequency match the
available power source. Please refer the label of the machine.

 Do not plug the equipment power cables into an electrical outlet if the power cable is
damaged.
 Avoid putting many loads on one electrical outlet as it could generate heat and fire
resulting from overload.
 Connect the grounding conductor to the earth terminal (GND):

14
Wire box parameter：

Φ5-20 T6.3A (110V)

grounding Power switch

Power

Wire电源盒
box

Fuse seat

接线槽
Connection groove

WARNING
Ensure no heavy objects rest on the power cord. Check to make sure the game cabinet does not
sit on the power cord as this could damage the cord and become hazardous.

To disconnect the game, grip the plug and pull it from the wall outlet. Never pull by the cord.

To prevent electric shock, do not touch the power plug when hand is wet.

Ensure that nothing rests on the power cord and that it is not located where it can be stepped on
or tripped over.

15
4. HOW TO PLAY

X-BALL is an all new 2-player video redemption game suitable for all ages. There are 10 exciting
mini-games to choose from. Toss balls at the interactive screen to complete missions within the
time limit. Tickets are awarded based on performance and final score.

1. Insert coin(s) to start. Press the “Start” Button.

2. Throw balls at the screen to select one of the ten mini games.

16
Note: Before the start of each game, there will be simple instructions on how to play each mini
game, the required number of targets needed to clear the stage, and the time limit.

NOTE:
Hitting the BELL will give
extended time.
Hitting the HEART will add
Life.
Hitting the SKULL will
decrease Life (avoid
hitting!)

3. Throw and hit targets on the screen with plastic balls to complete missions.

 Each mini game is 60 seconds long.

 Player’s life (number of hearts) will decrease when being attacked. Once the hearts run out,
the game is over (regardless of time remaining).

4. Stage result shows letter score for the stage completed. Tickets are awarded based
on performance and final score (average score of all mini games)

17
5. GAME OPTIONS
5.1 Parameter Settings

Press “Game Setting” (Red) button before credit in the demo

Game Setting：
1. COIN PEACK EDIT： Sets the qty. of coins per game
2. FREE PLAY： On/Off
3. GAMES: Setting each game can play the mini games number
4. TIME： Setting the minimum time of each mini game.
5. TICKET STATE： Sets the game no ticket
6. TICKETS： Sets ticket payout qty. per game
7. START MUSIC： Sets the DEMO music.
8. SAVE AND EXIT

18
 5.2 Error Display

SENSOR ERROR：

Possible Cause 1：Objects blocking the sensor

Possible Cause 2：Sensor PCB wiring is loose
Possible Cause 3：Sensor PCB is damaged

COM1 ERROR：

Possible Cause 1：COM port data line is loose.

Possible Cause 2：Mainboard is damaged.
19
TICKET ERROR
Game is out of tickets. Add tickets, and then press the reset button. Owed tickets will dispense.

20
6. MAINTENANCE, INSPECTION

6.1 Safety Check

Check the points listed before operating the machine. These checks are necessary for safe
machine operation:
1. Try to run the game before operation each day.
2. Conduct monthly routine checks of game components to ensure good working condition
3. Check the machine regularly for dust and clean when necessary.
Note: Parts and components require preventative maintenance to be kept running smoothly

6.2 Handling Precautions

When installing or inspecting the machine, be very careful of the following points and pay
attention to ensure that the player can enjoy the game safely.
Non-compliance with the following points or inappropriate handling running counter to the
cautionary matters herein stated can cause personal injury or damage to the machine

WARNING
• Before servicing the machine, be sure to turn power off. Servicing without turning the power
off can cause electric shock or short circuit.
• To avoid electric shock or short circuit, do not plug then unplug the power quickly
• Do not expose power cords and earth wires, these are susceptible to damage.
• Damaged cords and wires can cause electric shock or short circuit and should be replaced
immediately.
• When or after installing the product, avoid pulling the power cord to prevent unnecessary
wear and tear. Use the power button to disconnect power.
• In case the power cord is damaged, ask for replacement through where the product was
purchased from or replace locally. Continued usage of damaged cord can cause fire,
electric shock or leakage.
• Perform grounding appropriately. Inappropriate grounding can cause electric shock.
• Use fuses that meet specified rating. Fuses exceeding can cause an electric shock.

 Should a problem occur, turn off the power immediately and stop operating the machine.
Unplug the power cord of the service outlet.
 Insert the power plug securely into the outlet. Poor contact may cause overheating,
resulting in fire or burns.
 To ensure the warning labels attached on the machine are visible and legible, install the
machine in a well-lit location, and keep the labels clean at all times. Make sure the labels
are not hidden behind other game machines.
21
7. OVERALL CONSTRUCTION
7.1 Display cabinet：

22
No. Part No. Name Qty. Spec. Note

1 X101-401-000 Vent 1 Q235

2 X101-101-000 Display holder 2 Electrolysis board

Display cabinet back door
3 X101-501-000 1 15mm Plywood
（Above）
4 X101-402-000 Back door lock 2 171

5 X101-601-000 Handle 2

6 X101-403-000 LCD 1 47’/16：9

7 X101-102-000 Display backboard 2 Electrolysis board

8 X101-103-000 Vent net board 1

Display cabinet back door
9 X101-502-000 1 15mm Plywood
（Below）
10 X101-104-000 Wire box 1 Q235
Display cabinet service
11 X101-503-000 1 15mm Plywood
door
12 X101-105-000 Connect board 2 Q235

13 X101-106-000 Display baffle（Above） 1 Q235

14 X101-602-000 Glass board 1 Toughened glass

15 X101-107-000 Display baffle（Below） 1 Electrolysis board

16 X101-603-000 Pad board 1 EVA board

17 X101-604-000 Quakeproof rubber blocks 4

23
 7.2 Console Cabinet：

No. Part No. Name Qty Spec. Note.

1 X101-108-000 Guarding edge 1

2 X101-109-000 Table-board holder 1 2 Electrolysis board

3 X101-110-000 Baffle 2 Q235

4 X101-111-000 Table-board holder 2 1 Electrolysis board

5 X101-112-000 Regula 2 Q235

6 X101-113-000 Coin door 1 Q235

7 X101-001-000 Console cabinet 1

8 X101-114-000 Cross line pipe 1 Q235

9 X101-115-000 Light box holder 1 Q235

10 X101-605-000 Light box cover board 1 Clarity PC

24
 7.3 Sensor box Assembly

No. Part No. Name Qty Spec. Note

1 X101-116-000 Sensor Shelf 1 Q235
2 X101-606-000 Film（up and bottom） 2 Clarity PVC
3 X101-607-000 Film（left and right） 2 Clarity PVC
TV sensor Remote control
4 X101-608-000 1 Red PVC
board
5 X101-404-000 M3 Bolt 22 Q23
6 X101-801-000 Sensor drive board 1
7 X101-802-000 Sending sensor 1 1
8 X101-803-000 Receiving sensor 1 1
9 X101-802-000 Sending sensor 2 1
10 X101-803-000 Receiving sensor 2 1
11 X101-802-000 Sending sensor 3 1
12 X101-803-000 Receiving sensor 3 1

25
7.4 PC (computer) Assembly:

No. Part No. Name Qty. Spec. Note

1 X101-405-000 Host computer 1 S5300
2 X101-406-000 Bandage 1
3 X101-804-000 Power wire 1 1.5M
4 X101-805-000 Video frequency wire 1 3M
5 X101-806-000 Audio frequency wire 1 1.5M
6 X101-807-000 COM port data wire 1 1.8M

26
 7.5 Parts 1：

No. Part No. Name Qty. Spec. Note

1 X101-407-000 Speaker 2 4"15W 4Ω
2 X101-408-000 Ticket machine 1 TD-9
3 X101-409-000 Coin door lock 1 2222
4 X101-410-000 Coin machine 2
5 X101-411-000 Bulb 2 12V3W
6 X101-412-000 Micro SW 1
7 X101-413-000 Subwoofer 1 A80x2
8 X101-414-000 Ticket conversion board 1 TICK.CH.PCB

27
 7.6 Parts 2：
1 2 3

4 5 6

7 8 9

10

No. Part No. Name Qty. Spec. Note

1 X101-415-000 DC power 1 PA-1248-02
2 X101-416-000 Wire box 1
3 X101-417-000 Power box 1 PFM-150D12+5R
4 X101-418-000 Vent 1 DP200A（220V）
5 X101-808-000 Main board 1 V12-MB.PCB（V1.3）
6 X101-419-000 Daylight 1 T5 21W 220V
7 X101-420-000 Diode 2 4007 Counter
8 X101-421-000 Coin door lamp rack 2 White
9 X101-422-000 Power socket 1 AL0018
10 X101-423-000 φ100 button 2 Red, with lamp rack

28
7.7 Game Decals：

29
 10 11 12

13 14 15

16 17 18

COIN COUNTER TICKET COUNTER TICKET RESET

19 20 21

SERVICE
FUSE 5A AC 220V

22

ON

OFF

30
No. Part No. Name Qty. Spec. Note

1 X101-701-000 Header decal 1 1080×420

2 X101-702-000 Header Sheet metal decal 1 1205×57

3 X101-703-000 Starboard decal 1 1100×1104

4 X101-704-000 Nearside decal 1 1072×1118

5 X101-705-000 Starboard decal（inner） 1 600×830

6 X101-706-000 Nearside decal（inner） 1 600×830

7 X101-707-000 Console decal 1 1205×457

8 X101-708-000 Console warning decal 1 1205×96

9 X101-709-000 Face baffle decal 1 1205×142

10 X101-710-000 Nameplate 1 247×68

11 X101-711-000 Notice decal 1 1 95×70

12 X101-712-000 Notice decal 2 1 95×70

13 X101-713-000 High voltage warning 1 40×40

14 X101-714-000 Coin machine type decal 1 18×26

15 X101-715-000 Grounding decal 1 10×10

16 X101-716-000 Coin counter decal 1 30×6

17 X101-717-000 Ticket counter decal 1 30×6

18 X101-718-000 Setting decal 1 19×6

19 X101-719-000 Service decal 1 20×5

20 X101-720-000 110V Fuse decal 1 16×6

21 X101-721-000 110V voltage decal 1 20×6

22 X101-722-000 Power SW decal 1 10×20

31
 Have Questions? Contact us!
www.zs-shiyu.com
www.universal-space.com
Canada Office Parts & Service
+1-905-477-2823
Email: [email protected]

32