LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUP Passion for L Tecnologla

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 1 /31

LAB N°7: Command Prompt Commands and Resource Sharing

Surnames and First Names: Llasa Condori Edson Aldahir Group: 15

Pacheco Mollo Cesar Vidal (I do work but little xd)
Condori Cuyo Saul Lenin
Cahuana Machaca Nidwar Alex

INDEX
LAB N°7: Command Prompt Commands and Resource Sharing...................................................................1
Surnames and First Names: Llasa Condori Edson Aldahir Group: 15............................................................1
Pacheco Mollo Cesar Vidal (I do work but little xd)......................................................................................1
Condori Cuyo Saul Lenin................................................................................................................................1
Cahuana Machaca Nidwar Alex..........................................................................................................................1
INDEX....................................................................................................................................................................1
GENERAL SAFETY RECOMMENDATIONS................................................................................................3
1. GOALS.................................................................................................................................................6
2. DOCUMENTS OR REFERENCE STANDARDS..............................................................................6
3. PROCESS DESCRIPTION..................................................................................................................6
3.1 THEORETICAL FOUNDATION....................................................................................................6
3.2RESOURCES.........................................................................................................................................6
IECoU-........................................................................................................................................................................7
3.3PROCESS DESCRIPTION....................................................................................................................8
o e Vi CJ E.............................................................................................................................................................12
Part 2: Create and change directories.....................................................................................................12
Part 3: Create text files............................................................................................................................15

1
 Part 4: Copy, delete and move files........................................................................................................17
Part 5: Delete the directories...................................................................................................................21
Introduction................................................................................................................................................23
Part 1: Verifying Network Settings for Sharing.....................................................................................24
Part 2: Resource Sharing.........................................................................................................................26
Part 3: Change permissions for a shared folder......................................................................................29
4. ASSESSMENT...................................................................................................................................31
5. CONCLUSIONS................................................................................................................................32
6. ANNEXES (NOT APPLICABLE)....................................................................................................32
1.

Revision history
Participants Area Date Signature
Digital Technology and
Adriana Arista Valdivia
Produced by Management
reviewed by Alfredo Saire Huamán TDyG
Approved by Alfredo Saire Huamán TDyG

2
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUP Passion for L Tecnologla

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 2/31

Change control
Revision Date Change Description

GENERAL SAFETY RECOMMENDATIONS

1. Mandatory conditions for the use of the environment

• Tampering with hardware, electrical or network connections is prohibited.

• Place briefcases and/or backpacks in an orderly manner in the Laboratory classroom or in the
lockers assigned to the student.
• Do not bring liquids or food into the Laboratory classroom.
• At the end of the laboratory session, properly turn off the computer and the screen, and
organize the chairs used.
2. Emergency response
• Access and evacuation routes
Exit door of the laboratory to the right side continuing along the right side towards the
emergency stairs. The meeting point at the back of the building.
• Emergency response teams
CO2 extinguisher
• Safety signage
Safe area in case of earthquakes, Exit.

3
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07
TECSUP 1 System Prompt Commands and DOWN ISSUE: URO05/20/2021
• TECSUP Command Prompt Commands and Resource ISSUE: 20/05/2021
Passion for L Tecnologla
TASK Resource Sharing PAGE:
Sharing NTE 4/31
PAGE: 3/31

NAME OF THE PARTICIPANTS (Surnames and First Names)3. General safety rules
SIGNATURE NAME OF THE PARTICIPANTS (Surnames and

1. 6.
Z 7.

3. 8.

4. 9.

5. 10.
CHARACTERISTICS OF

TASK STEPS
T T T T T T TT CARE cu-i gumnand BELiR
OTHER RISKS
(Specify
each step)
A
N

cumnan ESAILL ATTENTION ATTENTION

sumunn EH “azuEeII
nimum

1.

3.

4.

5.

6.

7.

b.

9.

10.
4
11.

12.

4
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 5/31

1. GOALS
• Recognize the main file management commands in the command prompt
• Correctly configure resource sharing in Windows 10.

2. DOCUMENTS OR REFERENCE STANDARDS

• Review theoretical material shared on Canvas such as: Slides, official course text and links of
interest.

3. PROCESS DESCRIPTION

3.1 THEORETICAL FOUNDATION

In this chapter, you will learn about the different versions of Windows and the most suitable
editions of each for corporate and home users. You will learn how to configure the Windows
operating system and perform administrative tasks using the Control Panel in the GUI, commands
in the Windows Command Line Application (CLI), and the PowerShell Command Line utility.

You'll learn about the two methods of organizing and managing Windows computers on a network,
domain and workgroup, and how to share local computer resources such as files, folders, and
printers on the network. You will also learn how to set up a wired network connection in Windows.

You will learn how the six steps of the troubleshooting process apply to Windows operating
systems.

3.2RESOURCES

3.1.1 Safety talk 5 minutes

Every learning session must begin with a 5-minute safety talk, where the teacher clearly
explains the basic safety rules to follow during the session.

3.1.2 Mandatory safety implements (NOT APPLICABLE)

3.1.3 Materials and supplies (NOT APPLICABLE)

3.1.4 Equipment

5
 CODE: TDG-TA-GUIDE
LABORATORY N°7
07
IECoU-
Passion for Technology
Command Prompt and ISSUE: 20/05/2021

Resource Sharing PAGE: 6/31

A computer with:
▪ Windows 7 or higher
▪ Connection to the laboratory network
▪ VMware Player or VMware Workstation 12 or higher

Virtual machines:
▪ SHS-Win10

DVD or ISO:
▪ Windows 10 Professional installation ISO

3.1.5 Tools (NOT APPLICABLE)

6
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 7/31

3.3PROCESS DESCRIPTION
EXERCISE 1: Working in the Windows Command Shell

PROCESS STAGE POTENTIAL HAZARDS RISK CONTROLS

Electrical risk A
Exercise 01: Working in the
Windows Command Shell Electricity ELECTRICAL RISK Use of surge suppressors

Powering on the virtual machine created in the previous laboratory

a. Open the Vmware Workstation Player program, and open the Windows 10 virtual machine created in the
previous laboratory. To do this, go to the Player menu and select the File -> Open option.
b. Browse to the location of the virtual machine and select the corresponding file, then click Open and in the VM
window click the Power Virtual Machine button.

Step 1: Access the Windows Command Prompt.

a. Sign in to the Windows 10 virtual machine with a user with administrative privileges. In this case you should
log in with the Client01XYZ account created in previous laboratories.
b. To access the Windows command prompt, click Start and type cmd. Select Command Prompt or cmd.exe to
continue.
*** Replace

Step 2: Display the command help from the command prompt.

You can display command-line help using the help command. For more information about a specific command,
type the command followed by /? .
Step 1: At the command prompt, type help and press the Enter key. It shows a
command list.
Step 2: The results of the help command are too long to display in a
page, so at first glance you can only see the last part. To view it one page at a time, enter the command help |
more on the command line. The more command can page the results of another command when combined
with | (vertical bar) and more .
C:\Users\Client01XYZ> help | more
For more information about a specific command, type HELP followed by the command
name
ASSOC Display or modify extension associations
files.
ATTRIB Display or modify file attributes.
BREAK Sets or removes extended CTRL+C checking.
BCDEDIT Set properties on the boot database
to control the starting load.
CACLS Display or modify access control lists (ACLs)
of the files.

7
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 8/31

CALL Call one batch program from another.

CD Shows the name of the current directory or changes to another
directory.
CHCP Displays or sets the code page number
active.
-- Further --

Deliverable N°1: Capture the screen showing the result of the help command.

r
Trash
recycling

EÜ Select Command Prompt — □

Microsoft Windows [Version 19.0.10586]

(c) 2015 Microsoft Corporation. All rights reserved.

C:\Users\client 01-15>/help/?
"/help/??" It is not recognized as an internal or external command, program, or executable batch file.

C:\Users\client 01-15>help
For more information about a specific command, type HELP
followed by the command name
ASSOC Show or modify extension associations
of files.
ATTRIB Display or change file attributes. |
BREAK Sets or removes Ctrl+C extended checking.
BCDEDIT Set properties on the boot database to
control the starting load.
CACLS Display or modify access control lists (ACLs)
of files.
CALL Call to a batch program from another.
CD Sample he directory name current eitherchangesto other
directory.
CHCP Sampleor set the number of page of codes active.
CHDIR Sample he directory name current eitherchangesto other
directory.
CHKDSK Checks a disk and displays a status report.
CHKNTFS Display or modify the disk check at boot.
CLS Clear the screen.
CMD Start a new instance of the shell
Windows Activate Windows
COLOR________Set the default foreground and background colors__________________________________See 3 Confinijrariijin to activate
Windows.

ESP 11:41 a.m. m.

■■ PDDoeEE A # IS 20/05/2021

4%) =
Step 3: To view the next page, press the space bar. What happening when?
press the enter key?

A new command begins to appear every time we press the enter key

Step 4: Press q or Ctrl+C to exit after completing the functions of the

following commands:

Command Function

CD Displays the name of the current directory or changes to another directory.

8
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 9/31

CHKDSK Checks a disk and displays a status report.

TYPE Displays the content of a text file.

OF THE Delete one or more files.

DIR Displays a list of files and subdirectories in a directory.

DISKPART Displays or configures disk partition properties.

EXIT Exit the program cmd.exe command interpreter.

FORMAT Format a disk for use with Windows.

GPRESULT Shows Group Policy training by computer or user.

M.D. Create a directory.

TASKLIST Shows all running tasks, including services.

RD Remove a directory.

ROBOCOPY Advanced utility for copying files and directory trees.

SHUTDOWN Allows local or remote shutdown of a computer.

XCOPY Copy files and directory trees.

Step 5: Type md/? on the command line to display additional information and the
switches that can be used with this command.
C:\Users\Client01XYZ> md /?
Create a directory.

MKDIR route [drive:]

MD Path [drive:]

If command extensions are enabled, MKDIR changes as follows:

MKDIR creates any intermediate directories in the path, if necessary.

<some output omitted>
Use the information provided by the help command about md .

9
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 10/31

How would you create these folders C:\Users\Cliente01XYZ \a\b\c if your current directory is C:\Users\

Deliverable N°2: Capture the screen showing the result of the md command.

Cliente01XYZ?

You would use the md command to create folder a, and then the cd command to get into it, and again md for
folder b, and so on.

What command would you use to verify the creation of the nested directories?

To verify the creation of the directories you must use the dir command.

Step 6: Clear the screen with the command line.

What command did you use?

I used the cls command to clear the command screen.

Step 7: Press F7 on the keyboard for command history.

Deliverable N°3: Capture the screen showing the pop-up window that appears when
press F7.

LABORATORY N°7
• TECSUD Passion for Technology
CODE: TDG-TA-GUIDE 07

Command Prompt Commands and Resource ISSUE: 20/05/2021

1
0
 PAGE: 11 /31
Sharing

I my system symbol 3

C:\Usens\user01-15\a\b\c> 0: help | more

1: md/?
2: md a
3: cd to
4: md b
5: cd b
6: md c
7: cd c
8: say

Activate Windows
Go to Settings to activate Windows.

o e Vi CJ E ENG 4:24 pm
EN 05/25/2021

What is the last command you used? Press Esc on the keyboard to exit the dialog box.

I used the cls command

Step 8: Press the up arrow to display the last command used.

What is the last command?

The last command listed is cls

To exit the command prompt, type exit at the command line

Part 2: Create and change directories.

In this step, you will use the change directory ( cd ), create directory ( md ), and directory ( dir ) commands.
Note : Directory is another word for folder. The words directory and folder are used interchangeably in this lab.
Step 1: Type cd at the command prompt.
What is the current directory?

C: /User /user01-15

1
1
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 12/31

Step 2: Type dir at the command prompt to list files and folders
that are in the current folder.
C:\Users\Client01XYZ> dir
The C drive volume has no label.
The volume serial number is 9055-35E9

Deliverable N°4: Capture the screen showing the result of the DIR command

C:\Users\ITEUser directory
04/27/2019 09:21 A.M <DIR> .
04/27/2019 09:21 A.M <DIR> ..
04/25/2019 11:39 A.M <DIR> 3D objects
04/25/2019 11:39 A.M <DIR> Contacts
04/26/2019 10:29 A.M <DIR> Desk
04/25/2019 11:39 A.M <DIR> Documents
04/25/2019 11:39 A.M <DIR> downloads
<some
output omitted>
0 File(s) 0 bytes
15 Dir(s) 32,671, 969,280 bytes free
Step 3: In the current directory, use the md command to create three new folders:
XYZfolder1 , XYZfolder2 and XYZfolder3 . Type md XYZfolder1 and press the Enter key. Create
XYZfolder2 and XYZfolder3 . ( Note : The mkdir command performs the same function as the md command.)
C:\Users\Client01XYZ> md XYZfolder1
C:\Users\Client01XYZ> md XYZfolder2 XYZfolder3
Step 4: Type dir to verify that the folders have been created.

1
2
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 13/31

Enter

egable N°5: Capture the screen showing the result of the DIR command

Step 5: Type cd XYZfolder3 at the command prompt and press the Enter key.
What folder is it in now?

It finds us in the 15folder 3 folder, and in the command prompt it gives us the address C:/User/user01-
15/15folder3

Step 6: Create XYZfolder4 in the current directory. Inside the XYZfolder4 folder, create a
folder named XYZfolder5 . Use the dir command to verify the creation of the folder.
Deliverable N°6: Capture the screen showing the result of the DIR command

1
3
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 14/31

What command or commands did you use to create the nested folders?

We use the md command to create the folders, cd to enter the folders and change the address, and the dir
command to verify the creation of the folder.

Step 7: Change directories, if necessary, until you reach XYZfolder5.

Step 8: Write cd.. to change the current directory. Each .. is a shortcut to
move up one level in the directory tree.
After running the cd .. command, what is your directory now?
We are in C:/User/user01-15/15folder3/15folder 4

What would be the current directory if you run this command in C:\Users\XYZfolder4?

C:/User/user01-15/15folder3

Part 3: Create text files.

Step 1: Navigate to the directory C:\Users\Client01XYZ\XYZfolder1 . write cd
..\XYZfolder1 on the command line.
Step 2: Type echo This is doc1.txt > doc1.txt at the command prompt.
NOTE: The echo command is used to display a message at the command prompt. > is used to redirect the
message from a screen to a file. For example, in the first line, the message This is doc1.txt is redirected to a
new file named doc1.txt .
Step 3: Use the echo command and redirect > to create these files: doc2.txt , file1.txt and file2.txt .
C:\Users\Cliente01XYZ\XYZfolder1> echo This is doc2.txt > doc2.txt

1
4
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 15/31

C:\Users\Cliente01XYZ\XYZfolder1> echo This is file1.txt > file1.txt
C:\Users\Cliente01XYZ\XYZfolder1> echo This is file2.txt > file2. txt
Step 4: Use the dir command to verify that the files are in the folder
ITEfolder1 .
Deliverable N°7: Capture the screen showing the commands used

C:\Users\Client01XYZ\XYZFolder1> dir
Deliverable N°8: Capture the screen showing the result of the DIR command

Step 5: Use the more or type command to view the contents of the text files you
just created.
<some omitted>
output
04/29/2019 08:05 AM 19 doc1.txt
04/29/2019 08:06 AM 19 doc2.txt
04/29/2019 08:08 AM 20 file1.txt
04/29/2019 08:08 AM 20 file2.txt
4 File(s) 78 bytes
2 Dir(s) 32,625,397,760 bytes free
C:\Users\Client01XYZ\XYZfolder1> more doc1.txt
This is doc1.txt

1
5
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 16/31

C:\Users\Client01XYZ\XYZfolder1> type doc2.txt
This is doc2.txt
Part 4: Copy, delete and move files.

Deliverable N°9: Capture the screen showing the results of the commands

1 file was moved.

Deliverable No. 10: Capture the screen showing the result of the move command.

Step 2: Type dir at the command line to verify that doc2.txt is no longer in the

Step 1: At the command prompt, type move doc2.txt

C:\Users\Client01XYZ\XYZfolder2 to move the doc2.txt file to the directory
C:\Users\Client01XYZ\XYZfolder2 .
C:\Users\Client01XYZ\XYZfolder1> move doc2.txt
C:\Users\Client01XYZ\XYZfolder2
current directory.
Step 3: Navigate to C:\Users\Client01XYZ\XYZfolder2 to change the directory to
XYZfolder2 . Type dir at the command line to verify that doc2.txt has been moved.
Deliverable N°11: Capture the screen showing the result of the DIR command

1
6
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 17/31

C:\Users\user01-15\15folderl>dir
The C drive volume has no label.
The volume serial number is: C6E9-3434
C:\Users\user01-15\15folder1 directory

25/05/2021 05:32 Q. m. <DIR>

25/05/2021 05:32 Q. m. <DIR>
25/05/2021 05:16 Q. m. 10 docl.txt
25/05/2021 05:19 Q. m. 19 filel.txt
25/05/2021 05:20 p. m. 19 file2.txt
3 files 56bytes
2 you 38,081,359,872 byt it's free
will
C:\Users\user01-15\15folder1>

Step 4: Type copy doc2.txt doc2_copy.txt to create a copy of doc2.txt . Scribe

dir on the command line to check if a copy of the file has been created.
C:\Users\Client01XYZ\XYZfolder2> dir
<some output omitted>
C:\Users\ITEUser\ITEfolder2 directory

04/30/2019 09:07 AM 19 doc2.txt

04/30/2019 09:07 AM 19
2 File(s) doc2_copy.txt
2 Dir(s) 38 bytes
31,753,068,544 bytes free
Step 5: Use the move command to move doc2_copy.txt to XYZfolder1 . Type move doc2_copy.txt ..\
XYZfolder1 .
C:\Users\ITEUser\ITEfolder2> move doc2_copy.txt ..\ITEfolder1
1 file was moved.
Deliverable N°12: Capture the screen showing the result of the last two
commands

C:\Users\user01-15\15folderl> more docl.txt this is docl.txt

C:\Users\user01-15\15folderl> type doc2.txt this is doc2.txt

C:\Users\user01-15\15folderl>_______________

Step 6: A copy of the doc2.txt file can be created in a new location using the
copy command. At the command line, type copy doc2.txt ..\XYZfolder1\doc2_new.txt .
C:\Users\Client01XYZ\XYZfolder2> copy doc2.txt
..\XYZfolder1\doc2_new.txt
1 file was copied.
Step 7: The doc2.txt file can also be moved to a new location with a name
new file with the move command. Type move doc2.txt ..\XYZfolder1\doc2_new.txt at the command line.
C:\Users\Client01XYZ\XYZfolder2> move doc2.txt
..\XYZfolder1\doc2_move.txt

1
7
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 18/31

1 file was moved.

Deliverable N°13: Capture the screen showing the result of the move command.

C:\Users\user01-15>cd 15folder2
C:\Users\user01-15\15folder2>copy doc2.txt doc2_copy.txt
1 files) copied.

C:\Users\user01-15\15folder2>move doc2.txt . .\15folder1\doc2_new.txt

They have moved 1 files.

C : \Users\user1-15\15folder2>

Step 8: Type dir ..\XYZfolder1 to view the contents in XYZfolder1 without leaving the
current directory.
C:\Users\Client01XYZ\XYZfolder2> dir ..\XYZfolder1
<some output omitted>
C:\Users\ITEUser\ITEfolder1 directory
04/29/2019 12:08 P.M <DIR> .
04/29/2019 12:08 P.M <DIR> ..
04/29/2019 08:05 A.M 19 doc1.txt
04/29/2019 08:06 A.M 19 doc2_copy.txt
04/29/2019 08:06 A.M 19 doc2_move.txt
04/29/2019 08:06 A.M 19 doc2_new.txt
04/29/2019 08:08 A.M 20 file1.txt
04/29/2019 08:08 A.M 20 file2.txt
6 File(s 11 bytes
) 6
2 Dir(s) 31,467,700,224 bytes free

Deliverable N°14: Capture the screen showing the result of the DIR command
C:\Users\user01-15\15folder2>dir..\15folderl
The C drive volume has no label.
The volume serial number is: C6E9-3434

C:\Users\user01-15\15folder1 directory
25/05/2021 05:44 Q. m. <DIR> ■

25/05/2021 05:44 Q. m. <DIR> ■■

25/05/2021 05:16 Q. m. 18 docl.txt
25/05/2021 05:18 Q. m. 18 doc2_new.txt
25/05/2021 05:19 P- m. 19filel.txt
25/05/2021 05:20 P- m. 19 file2. txt
4 files 74 bytes
2 dirs 38,077,448,192 free bytes

C:\Users\user01-15\15folder2>_

1
8
 Step 9: Change the current directory to ITEfolder1 . Type cd ..\ITEfolder1 at the line
commands.

LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 19/31

Step 10: Move file1.txt and file2.txt to XYZfolder3 . To move all the files you
contain the word file to XYZfolder3 with a command, use a wildcard character ( * ) to represent one or
more characters. Type move file* ..\XYZfolder3 .

Deliverable N°14: Capture the screen showing the result of the move command.

C:\Users\user01-15\15folder2>cd . . \15folder1

C:\Users\user01-15\15folder>move file* . . \15folder3

C : \Users\user01-15\15folder1\file1 .txt
C : \Users\user01-15\15folder1\file2 .txt
They have moved 2 files.

C:\Users\user01-15\15folder1»

Step 11: To view the contents of the doc2_new.txt file, use the type or more command in the
Command line.
C:\Users\Client01XYZ\XYZfolder1> type doc2_new.txt
This is doc2.txt
Step 12: Use the ren command to rename doc2_new.txt to doc3.txt. Use
the dir command to display the contents of the directory.
c:\Users\Client01XYZ\XYZfolder1> ren doc2_new.txt file.log
Step 13: Use the type or more command to view the contents of the file.log file being accessed.
he just changed his name.
C:\Users\Client01XYZ\XYZfolder1> more file.log
This is doc2.txt
Step 14: To delete one or more files, use the del command with the file names
files on the command line.
Deliverable N°15: Capture the screen showing the results of the last 03 commands executed

1
9
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 20/31

C:\Users\user01-15\15folder1> type doc2_new.txt this is doc2.txt

C : \Users\user01-15\15folder1>ren doc2_new.txt doc3.txt

C:\Users\user01-15\15folder1>dir
The C drive volume has no label.
The volume serial number is: C6E9-3434
C:\Users\user01-15\15folder1 directory

25/05/2021 06:00 Q. m. <DIR>

25/05/2021 06:00 Q. m. <DIR>
25/05/2021 05:16 Q. m. 10 docl.txt
25/05/2021 05:1S P- m. 10 doc3.txt
2files 36 bytes
2 you 38,073,053,104 free bytes
C : \Users\user01-15\15folder1>more file. log
Cannot access file C:\Users\user01-15\15folder1\file.log

C : \Users\user Bl -15\15f older 1>more doc3.txt

this is doc2.txt

C:\Users\user01-15\15folder1>

What single command would you use to delete all files with doc2 in the file name? Use the command to
delete files with doc2 in the file name.

I would use the "del" command followed by the doc2 specification

What command would you use to delete all the files in the directory? Use the command to remove all files.

I would use the RD command to delete entire directories

Part 5: Delete the directories.

In this step, you will delete an empty and non-empty directory using the rd command.
Step 1: Use rd XYZfolder2 to delete the empty directory and verify that it has been deleted.
C:\Users\Client01XYZ> rd XYZfolder2
Step 2: Navigate to the directory C:\Users\Cliente01XYZ\XYZfolder3 .
Step 3: Use rd XYZfolder1 to delete the directory. Verify that the
directory using the dir command.
Were you able to delete the directory? Explain.

LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD

2
0
 Command Prompt Commands and Resource ISSUE: 20/05/2021
Passion for Technology

Sharing
PAGE: 21 /31

Could not delete directory 15folder1 because we were in directory 15folder3

Step 4: Use the rd /? command to determine the switch that allows the deletion of a
non-empty directory.
c:\Users\Client01XYZ\XYZfolder3> rd /S XYZfolder1
XYZfolder4, are you sure (Y/N)? and
Step 5: Use the appropriate commands to delete all text files and folders
that you created in this lab.
Deliverable N°15: Capture the screen showing the results of the commands used

solC: \Users\user1-15\15folder3>rd /s 15folderl pc15folder1, Are you sure (Y/N)? yes

The system cannot find the specified file .
C:\Users\user01-15\15folder3>cd..

C : \Users\user01-15>rd /s 15folder1
15folder1, Are you sure (5/N)? yes

C : \Users\user01-15>rd /q 15folder2 The directory is not empty.

C : \Users\user01-15>rd /s 15folder2
15folder2, Are you sure (Y/N)? yes

C : \Users\user01-15>rd /s 15folder3
15folder3, Are you sure (5/N)? yes

C:\Users\user01-15>_

Step 1: Type exit to close the command prompt window.

reflection question
What are the advantages of using the CLI compared to the GUI?

LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 22/31

EXERCISE 2: Share Resources in Windows

PROCESS STAGE POTENTIAL HAZARDS RISK CONTROLS

2
1
 Electrical risk A
Exercise 02: Share Resources
in Windows Electricity ELECTRICAL RISK Use of surge suppressors

Introduction
In this part, you will configure your Windows computer for sharing. For this we must have two virtual machines,
these machines must have the following name
• SHS-Win10XYZ
• SHS02-Win10XYZ

IMPORTANT: Throughout this laboratory you will have to modify the names of the virtual machines as follows:
• SHS-Win10XYZ = Computer01XYZ
• SHS02-Win10XYZ = Computer02XYZ

c. In each virtual machine, a user named Client01XYZ of type Administrator will be created. The password for
this user will be ARCTecsup2.
Deliverable N°16: Capture the screen showing the users of each virtual team

2
2
• TECSUD

PREDATOR Life at a glance

Change account settings

Block

Sign off
tm We accept Gmail

Calendar Mail •

eithe
To client01-15 _________________________
and
Y
-ura-W-
• r
Microsoft Edge
o Calculator
Clear
Photos Cortana

0 Alarms and clock

200 28°
AND- 18’
1 File Explorer >
Madrid
Complement... Twitter
03 Configuration

3002
() Start/Shutdown

■ H All applications
Store Skype video

I'm Cortana. Ask what you

A.M want. •9 m to
d. The entire laboratory will be carried out with the user account created in the
previous step.
LABORATORY N°7 CODE: TDG-TA-GUIDE 07

Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 23/31

Part 1: Verifying Network Settings for Sharing

In this part, you will set up the Windows computer for sharing. For the computer to share its resources using the
r
e
c
y
c
l
i
n
g
default sharing settings provided by Windows, the network must be set to private. The procedure below must
be carried out for both devices.
a. Navigate to Control Panel . In the small icons view, select Network and Sharing Center .
b. Under the View active networks heading, verify that the network appears as private. For Windows 7, it

2
3
should appear as home network.
If the network is not listed as private or home network:
Windows 10 : Click Start , find Settings . In the Settings window, select Internet & network > Ethernet . In
the Ethernet window, select the desired connected network. In the network profile, select Private .

Deliverable N°17: Capture the screen where the network type change occurs

2
4
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 24/31

Note : If the Create a HomeGroup window opens, click Cancel . A home group will not be used in this lab.
c. In the left pane, click Change advanced sharing settings . Verify that Network Discovery and File and
Printer Sharing are enabled in the private profile.

Deliverable N°18: Capture the screen showing the selected configuration

2
5
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 25/31

•4 Advanced sharing settings — □

4 •A'G« Network Center ... > Advanced Sharing Settings • © Search Control Panel P
Change sharing options for different network profiles
Windows creates a separate network profile for each network you use. You can
choose specific options for each profile.

Private (current profile )

Network discovery

When network discovery is turned on, this computer can see other
computers and devices on the network and is visible to other computers
on the network.
• Turn on network discovery
• Activate automatic configuration of devices connected to the
network.
OR Disable network discovery

Share files and printers

When file and printer sharing is enabled , users on the network can
access shared files and printers on this computer.
@ Turn on file and printer sharing
OR Turn off file and printer sharing

HomeGroup Connections

Typically, Windows manages connections to other computers in the

homegroup. However, if you have the same user accounts and passwords on
all your computers, you can have HomeGroup use your account.

Save changes Cancel

d. In Windows 8.1 and 10, expand the All networks profile, if necessary. Select Turn off password-protected
sharing . Click Save Changes to continue.
Part 2: Resource Sharing
In this part, you will prepare a folder to share on the local network. Other users, for example your colleague, on
the local network will only have read access to your shared folder. The procedure below must be carried out
for both devices.

a. On your computer, click Start > Control Panel > Folder Options .
b. Click the View tab. Clear the Use the sharing wizard (recommended) check box, and then click OK .
c. Right-click any empty area on the desktop , and then choose New > Folder to create a new folder on the
desktop.
d. Name this folder Share01- XYZ (ON THE OTHER COMPUTER IT WILL BE 02) . Create a text file named
Brief01-XYZ.txt (ON THE OTHER COMPUTER WILL PLACE 02) in the folder, with the following text: This
is an example document .
e. Right-click the Share01- XYZ folder, and then choose Properties . Select the Sharing tab and click
Advanced Sharing .
f. Check the Share this folder check box, and then click OK . Click Close to close the Share01- XYZ Folder
Properties window.

2
6
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD
Passion for Technology
Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 26/31

Deliverable N°19: Capture the screen where the Share this folder window is displayed

2
7
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 27/31

g. Click Start > Control Panel > System . What is the name of the current team?
Desktop-GDRSI21

What is the name of the second computer and the shared folder on it?

h. Click Start and type the name of the shared folder, for example, \\PartnerComputer\ShareXX. Note that
PartnerComputer is the name of computer 02 and ShareXX is the name of the shared folder on it.

2
8
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 28/31

When you have successfully accessed the resource, the contents of the Share02-XYZ folder will be
displayed.

Deliverable N°20: Capture the screen showing access to the resource

Can you open the Brief file?

Can you delete the Brief file? What happen?

i. Click Cancel to continue.

Part 3: Change permissions for a shared folder
a. Right-click the Share01-XYZ folder, and then choose Properties . Select the Sharing tab and click
Advanced Sharing and Permissions .
What are the default permissions?

LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD

2
9
 Command Prompt Commands and Resource ISSUE: 20/05/2021
Passion for Technology

Sharing
PAGE: 29/31

What needs to be modified to allow remote users to make changes to the Share01-XYZ folder?

b. To allow everyone to make changes to the contents of the Share01-XYZ folder, select the check box in the
Allow column and the Change row. Click OK to close the Permissions window. Click OK to close the
Advanced Sharing window. Click Close to close the Sample Properties window.

Deliverable N°21: Capture the screen showing the properties window with the changes made

c. Once you have made the same changes on the other computer, navigate to the Share02-XYZ folder again
using the same path.

Deliverable N°22: Capture the screen showing access to the resource

Can you open the Brief file?

Can you delete the Brief file? What happen?

What can you do to assign a drive letter to your partner's shared folder ?

d. Delete the shared folder Share01-XYZ and close all open windows.

3
0
 LABORATORY N°7 CODE: TDG-TA-GUIDE 07

• TECSUD Passion for Technology

Command Prompt Commands and Resource ISSUE: 20/05/2021

Sharing PAGE: 30/31

4. ASSESSMENT

42 Network and Communications Administration

Rubric

Result

Performance criterion
Course Hardware and Software Support Period 2021-1

Administrative Tools and Use of Control Panel

Activity Semester Yo

Student's name Week 7

teacher Adriana Arista Date 20/05/2021 Section AB

Requires Not
Score
Criteria to evaluate Excellent Well Improvemen acceptable
Achieved
t
Recognize the different commands for file
4 3 2 0
management
Correctly configure permissions for a shared
4 3 2 0
folder
Use Resource sharing correctly.
4 3 2 0

2
Correctly write the main implementation 4 3 0
steps and conclusions.
Communicates effectively, works with order, 4 3 2 0
cleanliness and punctuality
Total 20 15 10 0

Comments regarding student

performance

Description
Demonstrates a complete understanding of the problem or performs the activity
Excellent
meeting all specified requirements.
Demonstrates considerable understanding of the problem or performs the activity
Well
meeting most of the specified requirements.
Demonstrates a poor understanding of the problem or performs the activity with few
Requires Improvement
of the specified requirements.
Not acceptable Does not demonstrate understanding of the problem or activity.
LABORATORY N°7 CODE: TDG-TA-GUIDE
• TECSUD 07

3
1
 Command Prompt Commands and ISSUE: 20/05/2021
Passion for Technology

Resource Sharing
PAGE: 31 /31

5. CONCLUSIONS

Indicate the conclusions you reached after the topics covered practically in this laboratory (Minimum 05
conclusions)

- We have learned that Windows computer for shared use. For the computer to share its resources using the
default sharing settings provided by Windows.
-we learn different versions of Windows and the most suitable editions of each of them for corporate and home users
You will learn how to configure the Windows operating system.
- to organize and manage Windows computers on a network, domain, and workgroup, and how to share local
computer resources, such as files, folders, and printers on the network.
- We have made sure that the six steps of the troubleshooting process apply to Windows operating systems.
- Organization and teamwork in this laboratory.

6. ANNEXES (NOT APPLICABLE)

3
2