Multiselect DR
Multiselect DR
Clinical Use
Multix Select DR combines a cost-effective room setup with a high level of
clinical flexibility. With its reliable machine components it enables you to
examine your patients from head to toe for coverage up to 190 cm without the
need to reposition your patient. A fast digital workflow, enhanced dose
management, and a compact but flexible machine design offers you a wide
spectrum of clinical applications – serving virtually all your patients.
Multix Select DR – ideal for general radiography
Backed by a fully digital workflow in combination with a versatile mobile
detector, the compact Multix Select DR digital X-ray machine offers the full
spectrum of generalized and specialized exams:
Chest and orthopedic
Standing and weight-bearing
Free examinations, e.g. on a mobile trolley or in a wheelchair
On table examinations, e.g. recumbent
Enhanced image quality for all examinations with DiamondView Plus
Free examinations
No special low-absorption mobile table needed - mobile detector can be placed
directly underneath your patient
Supports up to 150 kg with patient recumbent on the detector
Clip-on grid and mobile detector holder available as options
Technical Specifications
System specification
Patient table2 and Table height: 75 cm (29.5")
tabletop Tabletop width: 80 cm (31.5")
Tabletop length: 235 cm (92.5")
Max. patient weight: 200 kg (441 lbs.)
Longitudinal tabletop travel : ± 46 cm (± 18.1")
Column stand Horizontal travel range: 138 cm (54.3"), movement arrested by
electromagnetic brakes3
Vertical travel range: 150 cm (59.1"), movement arrested by
electromagnetic brakes
Central beam height: 35 cm (13.8") to 185 cm
(72.8")
Rotation of tube around vertical axis: ± 90°; stop positions: 0°, ± 90°
X-ray tube rotation: ± 120°; stop positions: 0°, ± 90°
2
Bucky wall stand Vertical movement range: 150 cm (59.1")
Vertical travel range: 35 cm (13.8") to 185 cm (72.8")
Generator Generator frequency: 100 kHz
Output: 55 kW according to IEC 60601-2-7 (550 mA at 100 kV)
Exposure voltage: 40 kV to 133 kV
mAs range: 0.5 mAs to 800 mAs
X-ray tube Max. exposure voltage (IEC 60613): 135 kV
Anode heat storage capacity: 230,000 HU (170,000 J)
Max. heat storage capacity of the
tube housing: 2,240,000 J (3,024,000 HU)
Flat detector Dimensions (active field): 35.3 cm x 42.4 cm (14" x 17")
Pixel size: 139 µm
Spatial resolution (Nyquist frequency): 3.6 lp/mm
Clinical workflow
User interface syngo FLC
Patient registration Retrieval of patient list and examination data from the hospital/radiology
information system (HIS/RIS)
Emergency patient registration
Patient, study and image data administration
Organ program and More than 1000 organ programs can be stored, customized and arranged
exam set editor in exam sets using the advanced organ program and exam set editor
Organ programs consist of multiple imaging and workflow parameters
for particular body parts and imaging sequences
Accessories / Options
Manual release switch1 External hand switch for radiation release
Detector holder1, Trolley with detector holder for lateral acquisitions, independent of the
mobile patient table
1
Clip-on grid Grid with clips for attachment to the portable detector including
attachment to the outside of the unit
1
CAREMAX Measuring chamber for measuring the dose-area product and/or the
standardized patient entrance dose
1
Patient handle Overhead patient handgrip for the Bucky wall stand
Room planning
Room height min. 245 cm (96.5")
Machine weight Approx. 596 kg (1314 lbs.), not including wall stand for Multix Select
DR
Min. space 11 sqm, including Bucky wall stand for Multix Select DR
requirements 6.3 sqm, for Multix Select DR for chest and free exams machine variant
Multix Impact Digital X-ray System
Multix Impact is a state-of-the-art radiographic digital X-ray
system developed by Siemens Healthineers.
The system converts X-rays into digital signals for diagnostic imaging.
The device received 510(k) certification from the US Food and Drug
Administration (FDA) for clinical use in January 2019. The FDA classified
the system as a stationary radiology X-ray system.
The system features a flat table top and is equipped with MAX wi-D and
Impact wi-D wireless detectors. These include scintillators made from
caesium iodide (CsI), which offers high image quality with low patient dose.
The maximum patient weight capacity of the table is 300kg. The distance
between the table top and the detector is around 73mm.
The Bucky wall stand has a vertical travel range of 147cm and a central
beam height of 33cm. The distance between the stand cover and the
detector is less around 42mm.
“The positioning camera and CsI detector avoid the risk of
unnecessary exposure to radiation.”
The X-ray tube features a 10.1in touchscreen user interface with a resolution
of 1,280×800 pixels. Both wireless detectors are 35cmx43cm in size.
The MAX wi-D detector is 19mm-thick and weighs 3.3kg, while the IMPACT
wi-D has a thickness of 16mm and weighs 3.1kg. The X-ray generator has
output ranges of 55kW, 65kW and 80kW with a frequency of around
100kHz.
The Multix Impact digital X-ray system provides a cost-effective and user-
friendly environment with intuitive controls and graphical programme
selection.
The positioning camera and CsI detector avoid the risk of unnecessary
exposure to radiation. The X-ray tube-mounted touchscreen allows
technicians to be with patients for a longer duration.
The positioning guide enables complex scans to be prepared quickly. The
system is enabled with motorisation and tracking functions to reduce
physically exhaustive tasks for the technicians.
Other features
The detector’s in-tray charging and advanced detector sharing features help
accelerate workflows and reduce waiting times. It has six hours of battery
capacity in standby mode and can take up to 950 images.
More than 90% of the top healthcare providers partner with Siemens
Healthineers, while approximately 240,000 patients an hour use the
company’s systems.
Share this article