SW

CURÓÜ
CUF COURSE
Preparation of

*: costumes

Designed by Freepik reepik.com

live
COURSES
 INTRODUCTION
Swimsuits are essential items of clothing in the summer, there are many designs, colors
and prints.

In this course you will learn how to make swimsuits yourself, we provide you with molds
in all sizes and a step-by-step explanation to guide you in the making of each swimwear
item. There are classic, current and Mayan or one-piece bikini models. In relation to
bikinis, the beneficial thing about this type of swimsuit is that to make it you will not need
a lot of fabric, quite the opposite, and in addition, you can combine them in different
ways, thus achieving different outfits.

The course is intended for those women who are encouraged to learn something new,
for those who want to take care of their pocket by making swimsuits for personal use and
for those who would like to start selling them as part of a business, so, if you wish, you
will give the first steps in creating your own swimsuit business.

2
 g- ELEMENTS YOU WILL NEED
Overlock or domestic sewing machine
Fabric and elastics: we will delve into details later

Pins
Polyester or nylon thread (they have greater elasticity than common
thread)
6 to 9 mm polyester elastic used for swimsuits
To sew elastic fabric with a domestic machine, use a ball point
needle or stretch needle (it prevents the stitches from skipping when
you are sewing and they do not tear the fabric).

IMPORTANT

One point to keep in mind is that not

you must necessarily have a
overlock machine. With a machine
domestic or family enough!

4
The fabric used to manufacture swimsuits is lycra, this is an elastic fabric
that allows freedom of movement, hugs the body, is breathable and easy
to dry.

The lycra we recommend for swimsuits is silk lycra. There are different
prices, qualities, thicknesses and for different uses, for example, for sports
clothing.
A good quality lycra stretches vertically and horizontally, that is, in both
directions.

You will also need lining fabric (muslin/foam) for the inside of each
swimwear item, this is a breathable and thin fabric, it comes in different
colors.

If you want to add padding to the bikini top, you have to buy it at a
haberdashery store.

When you go to the store tell the

seller that you are going to make bikinis and/or
tights, this way he will help you and
will guide you in purchasing the fabric according to your
preferences, tastes and budget.

Taking into account that silk lycra is 1.50 m wide. You can buy 30 cm for a

5
bikini (bra and panties).
For a mesh you have to measure your length.

The one you should buy is specific for swimsuits, it can be virgin rubber or
polyester elastic. The one you should not buy is cotton elastic because it
is not suitable for water or prolonged exposure to the sun.
9 HOW TO TAKE MEASURES
YOUR BODY
This is the most important step to get started because each garment is
made based on the measurements you take. For this, you will only need a
tape measure.

All measurements must be taken directly on the body

Designed by Freepik – www.freepik.com

OR CHEST CONTOUR
With the measuring tape in hand you must measure the contour of the
chest where the bust is largest, with a bra of the appropriate size on, this
way we will avoid the garment being too tight. Then we write down the
number in centimeters.

7
0 HIP CONTOUR

In the same way, now we must measure the hip circumference at the
widest part. Don't forget to write down this number as well.
 SIZE CHART
To choose your size, you must be guided by the approximate size table.
These measurements are taken based on chest circumference and hip
circumference.

When you have your body measurements, check the table to see which
size corresponds to you and download the pattern for that size.

IMPORTANT

Patterns DO NOT include margin

sewing

SML XL 2XL 3XL

CONTOUR 85-87 88-82 100- 104-
OF 103 108

CONTOUR 88-81 82-85 86-100 101-105 106-110 III-II5

OF
*All measurements are expressed in centimeters
 RECOMMENDATIONS

IT'S TIME TO SEW...

Before starting to sew the mold, we recommend that you do a test on
a piece of fabric and then stretch it to verify that the stitches do not
break. If this happens, you will have to modify the tension and length
of the stitch so that you achieve the correct stitch.

When purchasing the ball point needle, keep the numbering in mind
(the higher the number, the thicker fabrics can be sewn).

The presser foot has to be made of plastic/Teflon (this allows the

fabric to slide easily and to make stitches without damaging the
fabric) but if you don't have it, a trick is to put paper/adhesive tape on
the presser foot of your machine. pack.

To sew, use your overlock machine or if you have a home machine,

zigzag stitch. There are machines that also have false overlock,
straight elastic. Any of these stitches can work for you.

When you start sewing, take the threads from the beginning of the
stitch and use them to help you slide the fabric.

The stitch must be short to work with elastic fabrics, we recommend

3, it has to be approximately the intermediate number that your
machine has.

1
0
When sewing the elastic, secure it first with a small seam and while
you sew it, stretch it a little (approximately 1 cm). Then so that it
cannot be seen, fold it inwards and sew it again with a zigzag stitch.

When you cut the fabric, do so without lifting it. You can help yourself
with the use of weights because this fabric tends to move/shift.

To cut in a fold, fold the fabric right side together.

When you cut the fabric, the arrows on the templates should be in
the direction of the fabric's greatest stretch.
gA TIME TO PRINT
The patterns are designed to be printed on A4 size sheets.

When printing, select the actual size or 100% scale option.

Once printed, check that the reference box measures 3cm x 3cm. This way
you will know if you have printed them correctly.

If you do not have a printer available, you can also trace them with paper
and pencil on the computer screen.
To obtain the complete pattern follow these steps. It's very easy!

Cut the molds along the line

Join them with tape or glue

Use the color guide to cut the size you want

If you print them in black and white, we recommend that you paint the line
of the size you want to make so you don't make mistakes when cutting.

1
3
 The molds are found below each explanation of the assembly of the
garment.
To access them you must click on the blue letters where it says “to access
the mold click here ”

Place 7. elastic bias binding around the contours of the legs,

stretching it slightly.
Join by 8. sewing the sides. Surf and row or row.
Place 9. elastic or elastic bias in the waist as you prefer ( we
recommend placing it on the front and placing an appliqué at the end)

To enter the mold click here

Designed by Freepik - www.freepik.com
9 WHICH SUIT WILL FIT YOU BEST
ACCORDING TO YOUR BODY TYPE
In this part we leave you some recommendations when choosing your
swimsuit.

Designed by Freepik – www.freepik.com

HOURGLASS BODY

This body type has the same bust and hip proportion, if that is your case, all
the swimsuits will look good on you. You just have to maintain that balance
by using solid colors and without many details because if, for example, you
add details in The bikini top will look fuller and you will take center stage
from your hips and vice versa.
The hips are larger than the bust, in this situation, you have to seek to
achieve a balance since your hips steal the attention, that is why if you
prefer a bikini you should wear bras with prints, bows, fringes, ruffles, bright
colors, etc in such a way that they create volume. At the bottom you have to
use plain colors, without details that divert attention.
If you choose to wear mesh, it can be in gradient colors (the lightest color on
top), have a print, ruffles, or fringes on the top.

• INVERTED TRIANGLE SHAPED BODY

This body has the opposite characteristics of the previous body (her hips are
small and her back and bust are larger) so if that is your body type and you
wear a bikini bottom, wear panties with details, bright colors or prints. On
top, try to wear solid colored bras.
If you choose to use mesh, avoid ruffles, fringes, etc. at the top because
they will create more volume.

The peculiarities of this body are that it has the same proportions at the top
and bottom. For this reason, if you have this body, try to maintain balance,
with similar pieces on the top and bottom.

below. You can wear high-waisted panties to accentuate the waist.

OTHER TIPS

If you are very thin, wear bikinis with reliefs, details on the bodice or
panties, they will look very good on you and will increase the volume,
for example, in the panties, the strips on the sides of the hips. If you
want to wear a swimsuit with stripes, make sure they are horizontal
as they visually create a feeling that you are wider.

If you have a small bust, look for a bra that has prints, details (fringes,
ruffles, etc.), and bright colors (avoid black).

If you want to refine your figure, stylize it by wearing a bikini or mesh

with vertical stripes. Also if you are short, use this type of prints.

WHAT COLOR SHOULD I CHOOSE

ACCORDING TO MY
SKIN COLOR?
If you have white or light skin, the colors that suit you are the
following: blue, turquoise, pink, intermediate green. Avoid white,
orange, yellow, nude and pastel colors as they will accentuate the
pale color of your skin and will not contrast.

If you have tan or dark skin, use bright colors: fuchsia, red, orange,
yellow, light blue. These will highlight your dark complexion. Try not
to use pastel colors.

The darker the color of your mesh, the more it will elongate your
legs and stylize your body.
 gHOW TO WASH SWIMSUITS?
The sun, water, chlorine, sand can harm your swimsuits (the fabric, its
color), which is why below we leave you some tips to keep in mind when
washing:

Do it by hand if possible with neutral soap, avoid the washing

machine because it can be aggressive for the swimsuit: the shape
and its fabric.

Hang it in the shade, especially if it is dark in color as the color may

fade or lighten.

Wash it every time you use it to remove chlorine, sand, salts or

other residue that may be left on the garment.

Be careful with sunscreen or creams because they can stain the

swimwear.

AMALLA OR BIKINI,
WHICH ONE DO I
CHOOSE?
Sometimes we can't decide which swimsuit to choose, the important thing
is that you feel comfortable and beautiful.

Below, we give you some characteristics of bikinis and tights so you can
choose the most suitable one for you.
 Ideal for sunbathing
They never go out of style
You can combine them in different ways
Fast dry
They are very comfortable

Disadvantages:
Love handles are harder to hide
They style less

They help protect the skin from the sun

They stylize the figure
They help to hide some areas that we do not want to show
They lengthen their legs
They provide comfort to get into the water
They are in trend

Disadvantages:
They take longer to dry
By sunbathing, you will only tan some parts of your body

Whether you wear mesh or a bikini, sometimes we don't feel so comfortable

showing certain parts of our body and we want to hide them, but others
stand out, that's why we give you some tips to keep in mind when choosing
your suit. bathroom and enjoy using it.

If you have a large bust, do not choose triangle-shaped bras as they

will be a little uncomfortable, nor with strips that tie around your neck
because they will make your neck hurt.
Avoid those bras that have fringes, strips, ruffles, etc. because these
increase the volume.

On the contrary, if you have a small bust, opt for bras with details,
these will create more volume.

In the case of the hips, it is the same as the bra. If you have small
hips, they will look bigger if you use neon colors or if the panties have
strips on the sides, fringes, large prints, etc. And if you have large
hips, they will stand out more. If you don't want this, use plain colors,
make sure that the panties have no details, strips since these will
draw attention to that area that you want to hide.
 High-waisted panties help hide different areas such as the tummy and love
handles.

Avoid large prints if you are chubby because these make you look bigger.

If you are very tall or very short, avoid wearing high-waisted panties since your
torso will not be proportionate to your height. Ideally, it should be used by girls of
average height.

IMPORTANT
Beyond all the advice, remember that you are beautiful and it doesn't
matter if you have large or small busts, a rectangular or hourglass body,
wear a swimsuit that you feel comfortable in and enjoy the summer!

2
2
Q-HOW TO MAKE SUSPENDERS
ADJUSTABLE'
To begin, we must have all the materials.

Need:
Lycra
Rings and sliders (to make 2 straps you will only need 2 rings and 2
sliders). These two elements come in different sizes and will depend
on the width of the strap you make.
Scissors
Centimeter or ruler

Step by Step:

1. Cut two strips 4 cm wide, 45 to 55 cm. Long (it has to be in the

direction in which the lycra has the least elasticity).
2. We will also cut two strips 5 cm long by 4 cm wide.
3. Fold them in half, right side to right side.
4. Sew on the wrong side with an overlock machine or zigzag stitch.
5. Then turn the strip so that it is right side up with the help of a metal
bias turner, pin/safety pin or an invisible clip (the one used for hair).
A safety pin is also often used, but we do not recommend it because
it hurts the fabric.

2
4
 6. Once we have the straps ready, we will take one and pass it through
the slide, entering through one of the holes and exiting through the
other (from bottom to top):

7. We will sew this end with a zigzag or straight stitch. (You can pass
the stitch 2 or 3 times to make it firmer).

8. At the other end we will pass the ring:

9. We will pass this same end through the slide in the same way as we
did previously:

10. To finish, we have to pass one of the 5 cm strips through the ring
and fold it in half:

2
6
11. Ready! This is how it should look:

2
7
Designed by Freepik - www.
 EXPLANATIONS AND MOLDS
Below, you will find the molds of each garment with its respective size and
explanation. You will see that it is easy to do.

Most molds have to be cut on the fold, that is, you must cut the pattern
with the fabric folded. This way when you unfold it you will get the
complete piece.

i A CONSE^
Before starting to make the garment, we recommend you
practice. You can sew it on a piece of stretch fabric or make
the entire piece out of another fabric you have that you can
use for practice.

2
9
 RUFFLED BIKINI (SET)

Step by Step:
We will start with the straps:
1. Cut two strips of 1 m by 4 cm wide (it has to be in the direction in
which the lycra has the least elasticity).
2. Fold them in half, right side to right side.

3. Sew on the wrong side with an overlock machine or zigzag stitch,

 you can add an elastic to make it even more resistant.
4. Then turn the strip so that it is right side up with the help of a metal
bias turner, pin/safety pin or an invisible clip (the one used for hair).

Clarification: this bikini top does not have lining fabric, both parts (exterior
and interior) must be made of lycra.

We will continue with the top rates/drinks:

1. Cut the pattern 4 times on the fabric. Remember that it does not
include seam allowances.
2. Place pins to keep the two fabrics together (exterior and interior) so
that they do not slide when sewing them.
3. When sewing, leave a small space without a seam to be able to turn
the fabric.
4. Turn the garment inside out and sew that space.
5. Mark the channel for the strips and sew it with a straight stitch
taking into account the instructions on the mold.
6. With the help of a seam ripper, open the fabric at the end of the
channel to be able to pass the strips through.
7. Insert the straps and arrange the bodice so that it is gathered.

Downstairs:
1. Cut two strips of 1 m by 4 cm wide.
2. Fold them in half, right side to right side.
3. Sew on the wrong side with an overlock machine or zigzag stitch,
you can add an elastic to make it even more resistant.
4. Then turn the strip so that it is right side up with the help of a metal
bias turner, pin/safety pin or an invisible clicker (the one used for

3
1
 hair).
5. Cut the pattern 4 times on the fabric. Remember that it does not
include seam allowances.
6. Place the 2 outer fabrics right side together and sew in the crotch,
perform the same procedure with the inner fabrics.

7. Join the 2 parts (exterior and interior) right side together, join them
with pins (optional) and sew the top and sides of the garment
(except approx. 1.5 cm. from the top which would be the channel for
the strip) with an overlock machine or medium zigzag stitch.
 8. Sew the elastic on the sides (except for approx. 1.5 cm. from the top
which would be the channel for the strip) with an overlock machine
or zigzag stitch.
9. Make a small cut in the inner crotch seam so you can turn it inside
out.
10. Turn the piece so that it is right side up.
11. Mark the channel and sew with a straight stitch.
12. Insert the straps and adjust the panties.

Note: The smaller the channel, the more gathered the garment will be.

To enter the mold click here

3
3
 BE BIKINI TOP WITH BOW
FRONTAL

Step by Step:
1. Cut the patterns into the fabric (outside and lining). Remember that
it does not include seam allowances. Pay attention because the
back part must be cut at the fold, that is, the fabric must be folded in
such a way that when cut, two equal sides remain.
2. Make 2 adjustable straps. On page 24 we show you how to do
them.

3
4
Assembly of the top:
1. Join the front outer parts with the back part (right side to right side)
and sew with an overlock machine or zigzag stitch. It should look
like this:

2. Repeat the same procedure with the lining fabrics.

3. Place the outer fabric and the lining fabric right side together. In the
middle of these two we will insert the straps (between the outer
fabric and the lining fabric), so that when we turn the garment inside
out the straps cannot be seen.

4. Join with pins and sew the entire piece as indicated by the red lines:

5. Sew elastic throughout the piece except for the straps for the bow.
6. Make a small cut in the seam that joins the back to the front, on the
inside of the garment to be able to turn it inside out.
7. Turn the piece over and sew the straps on the back.

3
5
 8. Tie the front ties with a small knot.

To enter the mold click here

--------x----------
Step by Step
1. Cut the pattern into the fabric (outside and lining). Remember that it
does not include seam allowances.
2. Cut two strips of 45-55 cm by 4 cm wide and one strip of 1 m by 4
cm wide (it has to be in the direction in which the lycra has the least
elasticity).
3. Fold them in half, right side to right side.

3
7
 4. Sew on the wrong side with an overlock machine or zigzag stitch,
you can add an elastic to make it even more resistant
5. Then turn the strip so that it is right side up with the help of a metal
bias turner, pin/safety pin or an invisible clip (the one used for hair).
6. Place the outer fabric and the lining fabric right side up, in the
middle of these two We will insert the strap (between the outer
fabric and the lining fabric), so that when we turn the garment inside
out the seams cannot be seen.

To continue you can choose any of these two procedures:

Option 1
1. Baste the sides.
2. Sew the sides with a zig zag stitch.

3. For the channel at the bottom of the cup, fold 1.5 cm from the base.
Sew with a zig zag stitch.
4. Pass the 1 m strip. through the two cups of the top with the help of a
bias turner, pin or invisible clip.

3
8
Option 2
1. Baste and sew the sides (leave without seams the part of the hem -
1.5 cm- through which the bottom strip will pass).
2. Remove the bodice strip from one side and sew the base of the cup
with a zig zag stitch or overlock machine. Rotate the piece.
3. For the hem, sew with a zig zag stitch 1.5 cm from the base of the
cup.
4. Pass the 1 m strip. through the two cups of the top with the help of a
bias turner, pin or invisible.

You can do the basting by hand or with the machine (straight and long
stitch).

To enter the mold click here

--------x----------
Step by Step:
1. Cut the patterns on the fabric (exterior and lining). Remember that it
does not include seam allowances. Pay attention because they
must be cut in the fold, that is, the fabric must be folded in such a
way that when cut, two equal sides remain.
2. Place the outer fabric right side up and sew the sides. You can do it
with an overlock machine or with a straight and zigzag stitch on a
home machine.
3. Repeat the same procedure with the lining fabric.
+0
 4. Place the lining inside the outer fabric (it should be as if the top
were finished, that is, the wrong side of the outer fabric with the
right side of the lining fabric), baste it and sew it together with the
elastic, you can do it with an overlock machine or with zigzag stitch.
5. So that the elastic is not visible, fold the fabric inwards and sew
again with a zigzag stitch.

To enter the mold click here

--------x----------
ONE SHOULDER BIKINI TOP

Step by Step
1. Cut the pattern into the fabric (outside and lining). Remember that it
does not include seam allowances.
2. Place the outer fabrics right side together and sew the sides and
shoulder. You can do it with an overlock machine or with a straight
and zigzag stitch on a home machine.
3. Repeat the same procedure with the lining fabric.

4
2
 4. Place the lining inside the outer fabric (it should be as if the top
were finished, that is, the wrong side of the outer fabric with the
right side of the lining fabric), baste it and sew it together with the
elastic, you can do it with an overlock machine or with zigzag stitch.
5. So that the elastic is not visible, fold the fabric inwards and sew
again with a zigzag stitch.

To enter the mold click here

4
3
 BIKINI TOP WITH Ruffles

Step by Step:
1. Cut the pattern into the fabric (outside and lining). Remember that it
does not include seam allowances.
2. Cut two strips of 45-55 cm by 4 cm wide and two strips of 1 m by 4
cm wide (it has to be in the direction in which the lycra has the least
elasticity).
3. Fold them in half, right side to right side.
4. Sew on the wrong side with an overlock machine or zigzag stitch,
you can add an elastic to make it even more resistant, then turn the
strip so that it is right side up with the help of a metal bias turner,
pin/safety pin or a clip invisible (the one used for hair).
5. The bodice is made with the same steps as the triangular bodice
(see page 38)

6. To add the ruffles, cut out the mold pattern and place it along the
entire length of the strap (leave 2 cm. at the end without ruffle) and
on the side of the triangle of the bodice. Pins can be used to evenly
distribute the ruffle on the strap and bodice.
+
4
 7. Sew with zigzag stitch.
8. The final part of the strap (2 cm. without ruffles) can be sewn to the
horizontal strip or make a small channel for it to cross said strip.
9. Sew the other strip in the center of the bodice so that it is equally
long on both sides to be able to tie at the back.

To enter the mold click here

--------x----------

4
5
 CLASSIC BIIKINI

Step by Step:
1. Cut the pattern into the fabric (outside and lining). Remember that it
does not include seam allowances. Pay attention because they
must be cut in the fold, that is, the fabric must be folded in such a
way that when cut, two equal sides remain.
2. Place the lycra right side up and sew the crotch and ends, it can be
with an overlock machine or with a zigzag stitch if you have a
domestic machine.

4
6
 3. Turn the piece over.
4. Repeat the same procedure with the lining fabrics.
5. Arrange the lining inside the outer fabric (the fabrics should be as if
the panties were finished, that is, the wrong side of the outer fabric
with the right side of the lining fabric) and sew.
6. Add elastic throughout the panties, you can do it with an overlock
machine or with a zigzag stitch.
7. So that the elastic is not visible, fold the fabric and sew again with a
zigzag stitch.

To enter the mold click here

--------x----------

4
7
Step by Step:
1. Cut the patterns on the fabric (exterior and lining). Remember that it
does not include seam allowances. Pay attention because they
must be cut in the fold, that is, the fabric must be folded in such a
way that when cut, two equal sides remain.
2. Place the 2 outer fabrics right side together and sew in the crotch
with an overlock machine or zigzag stitch.
3. Perform the same procedure with the lining fabrics.
4. Join the 2 parts (exterior and lining) back to back, baste and sew
the entire garment (except for the

4
8
5. tips) along with the elastic, you can do it with an overlock machine
or a zigzag stitch.

*The blue lines indicate the ends that should not be sewn

6. Make 2 adjustable straps/straps 30 cm long (on page 24 we show

you how to do it) and two small straps with rings 4 cm long. You can
make them with lycra or elastic.

1
q
 7. The longest straps/straps will go in the front and the smallest ones in
the back
8. Place one of the straps on top of one of the ends of the bikini, facing
right side, wrap it with the sides and sew a straight seam 2 or times.
9. Repeat the same procedure with the remaining tips.
6. Then, so that the elastic is not visible, fold the fabric inwards and sew
again with a zigzag stitch.
10.To finish we only have to make a small seam to join the front and back
straps.

To enter the mold click here

Step by Step:
1. Cut the pattern in the fabric (exterior and lining) in a fold, that is, the
fabric must be folded in such a way that when opening it we have
the front or rear mold complete and equal on both sides. Remember
that the pattern does not include seam allowances.
2. Place the lycra right side up and sew the crotch and ends, it can be
with an overlock machine or with a zigzag stitch if you have a
domestic machine.
3. Repeat the same procedure with the lining fabrics.
4. Place the lining inside the outer fabric (it should look as if the
panties were finished) and baste.

5. Sew the entire panty together with the elastic, you can do it with an
overlock machine or with a zigzag stitch. If you do it with a straight
stitch you can skip the stitches or break them when putting on the
garment.
6. So that the elastic is not visible, fold the fabric and sew again with a
zigzag stitch.

1
q
To enter the mold click here

--------x----------
 BIKINI IN PEAK

Step by Step:
1. Cut the pattern into the fabric (outside and lining). Remember that it
does not include seam allowances. Pay attention because they
must be cut in the fold, that is, the fabric must be folded in such a
way that when cut, two equal sides remain.
2. Place the 2 outer fabrics right side together and sew in the crotch
with an overlock machine or zigzag stitch.
3. Perform the same procedure with the lining fabrics.
4. Join the 2 parts (exterior and lining) back to back, baste and sew
the sides together with the elastic, you can do it with an overlock
machine or with a zigzag stitch.

5
3
 5. So that the elastic is not visible, fold the fabric inwards and sew
again with a zigzag stitch.
6. On the other hand, place the strips that will form the waist, right side
together and sew the ends with an overlock machine or zigzag
stitch.

7. Turn the strip so that it is inside out and then fold it in half, wrong
side to wrong side (as indicated by the knitted lines on the pattern).
8. Baste it to the outline of the bikini and sew it with an overlock
machine or zigzag stitch (the seams of the strip should be in the
center of the bikini).

To enter the mold click here

5
4
CLASSIC ONE-IN-ONE SWIMSUIT

Step by Step:
1. Cut the patterns on the fabric (exterior and lining). Remember that
they do not include seam allowances. Pay attention because they
must be cut in the fold, that is, the fabric must be folded in such a
way that when cut, two equal sides remain.
2. Place the lycra right side up and sew the shoulders, crotch and
sides of the torso, it can be with an overlock machine or with a
zigzag stitch if you have a domestic machine. Turn the piece over.

5
5
 3. Place the lining fabric right side up and sew the crotch and sides of
the torso, using an overlock machine or a zigzag stitch if you have a
domestic machine.
4. Place the fabrics (exterior and lining) as if the piece were finished
and sew with an overlock machine or zigzag stitch. Turn the piece
over.
5. Add the elastic to the armhole, neckline, back and legs. Place it first
with pins - in the middle and at the ends - and sew with an overlock
machine or with a zigzag stitch if you have a domestic machine.
6. So that the elastic is not visible, fold the fabric and sew again with a
zigzag stitch. Turn the piece over.

To enter the mold click here

--------x----------
 ONE SHOULDER SWIMSUIT

Step by Step:
Cut 2 pieces of each mold out of fabric (1 for the outside and one for the
lining). Remember that they do not include seam allowances.

We will start with the exterior fabrics:

1. Place front top A on top of front B, right sides together and sew
with

5
7
 overlock machine or zigzag stitch if you have a domestic machine
as indicated by the red lines:

2. Then, repeat the same procedure, but this time, with the rear parts.
3. When you have the back and front ready, place them right side
together and sew the shoulders, crotch and sides of the torso, it can
be with an overlock machine or with a zigzag stitch if you have a
domestic machine. Turn the piece over.

We will continue with the lining:

4. For this, we will carry out the same procedure that we used with the
 exterior.

5. When you have both pieces ready, place the lining inside the outer
fabric, as if the garment were finished.
6. Baste the openings (neckline, armhole, legs and side) and sew with
an overlock machine or zigzag stitch.
7. Add the elastic to all the openings. Place it first with pins - in the
middle and at the ends - and sew it with an overlock machine or
with a zigzag stitch if you have a domestic machine.
8. Turn the piece over and, so that the elastic is not visible, fold the
fabric and sew again with a zigzag stitch.

To enter the mold click here

--------x----------
 RUNNED SWIMSUIT

Step by Step:
1. Cut the patterns on the fabric (exterior and lining).
Remember that they do not include seam allowances.

We will start at the bottom:

2. Place the lycra right side up and sew the crotch and ends, it can be
with an overlock machine or with a zigzag stitch if you have a
domestic machine.
 3. Perform the same procedure with the lining fabrics.
4. Arrange the lining inside the outer piece (it should be as if it were
finished, that is, the wrong side of the outer fabric with the right side
of the lining fabric) and sew the waist and legs with an overlock or
zigzag machine.
5. Add elastic throughout the panties, place it first with pins - in the
middle and at the ends - you can do it with an overlock machine or
with a zigzag stitch.
6. So that the elastic is not visible, fold the fabric and sew again with a
zigzag stitch.

For the bust part:

1. Place the outer fabric and the fabric right side together. of lining
and sew with an overlock machine or
Zigzag stitch the entire piece except the bottom and the top tip.
2. Place the strips (insert them from below) between the outer fabric
and the lining fabric and sew.
61

3. Add the elastic to the sides of the bust, place it first with pins - in the
middle and at the ends - and sew. So that the elastic is not visible,
fold the fabric and sew again with a zigzag stitch.
4. Sew the bottom part with a long straight stitch and leave the
 threads, we will use these for gathering, stretching them slightly
until the desired gathering is achieved.
5. Place the outer fabric of the bust part and the front of the panties
right side together and sew with a zigzag stitch.

To enter the mold click here

--------x----------
 WHOLE SWIMSUIT
CRUZANO

Step by Step:
6. Cut the pattern into the fabric (outside and lining). Remember that it
does not include seam allowances. Pay attention because they
must be cut in the fold, that is, the fabric must be folded in such a
way that when cut, two equal sides remain.
7. Place the front parts A (exterior and lining) wrong to wrong and
baste the neck and then sew together with the elastic with an
overlock machine or zigzag stitch.
8. Carry out the same procedure with the front parts B.

9. Sew the lower parts of the two front pieces ( A and B ) with a long
straight stitch and leave the threads, we will use these for gathering,
stretching them slightly until the desired gathering is achieved.
10. Place the front parts C (outside and lining) wrong to wrong and
baste the legs.
 11. When you have the three parts ready, place them one on top of the
other, first part C , then part A (knit with right side) and then B (purl
with right side) and sew with a zigzag stitch.
12. Place the back parts (exterior and lining) wrong side to wrong side
and baste the armholes, collar and legs.

13. Place the back and front parts purl to purl and sew the shoulders,
sides and crotch with an overlock machine or zigzag stitch.
14. Sew elastic to the neck, armholes and legs.
7. So that the elastic is not visible, fold the fabric and sew again with a
zigzag stitch.

To enter the mold click here

6
5