TECHNICAL DATA SHEET

FLEXICRETE
Flexible Cementitious Waterproofing 2K

PRODUCT DESCRIPTION:

FLEXICRETE is a two component, flexible It is recommended that a cement and sand fillet be
cementitious waterproofing membrane. It consists of formed at all corners to receive the waterproofing
selected cement blend with well-graded fillers and membrane.
synthetic resin.
Prior to the application of the waterproofing
It could be applied onto damp substrates by brush, membrane, dampen the substrate with water while
roller or spray. FLEXICRETE is capable of bridging ensuring that no free water is present on the surface.
hairline cracks.
MIXING INSTRUCTIONS
CUSTOMER BENEFITS
• Flexible, durable and weather resistant Mixing ratio
• Excellent adhesion to most substrates Pour Part A (liquid) into a clean container. Slowly add
• Excellent waterproofing qualities – able to Part B (powder) into the container and mix with a slow
withstand high hydrostatic pressure speed mechanical mixer until homogeneous and lump
• Breathable membrane – permeable to free. Allow the mix to stand for 5 minutes and re-stir
water vapor and yet impermeable to water manually before use.
• Bridge hairline cracks
APPLICATION
• Non-toxic – suitable for use in waterproofing
For best results, damp the surface before coating with
of potable water tanks
FLEXICRETE.
• Can be applied onto damp surface
For horizontal and vertical surfaces, a roller and/or
RECOMMENDED FOR:
paint brush may be used to apply the slurry. Care
• Basement walls must be taken to ensure that air is not entrapped in
• Reservoirs, sumps, concrete gutters, planter the membrane.
boxes, potable water tanks, culverts, canal,
water retaining structures, etc. Apply the 1st coat and work generously to fill all the
• Swimming pools and features pores and honeycombs. Allow the membrane to dry
• Kitchen and toilets approximately 2 to 3 hours prior to application of the
• Domes and concrete structures second coat. The 2nd coat must be applied crosswise.
• Roof deck and balconies
• Fire walls After applying the 2nd coat of waterproofing
• Canopies membrane, allow a minimum curing time interval of 15
– 72 hours before laying the screed and commencing
METHOD OF APPLICATION ponding test. Should ponding test exceed 4 hours, a
SURFACE PREPARATION minimum curing time interval of 72 hours is
The substrates must be clean and sound, free of dust recommended.
and loose particles. Cement laitance, oil, and grease,
mold release agents must be removed from concrete
surfaces by wire brushing, scabbling or by other
means. Dampen the substrates prior to application.

Important Note:
The information contained in this leaflet is published to the best of our knowledge an d
is supported by current available data. Hence, subject to the ca re an d me t h od o f
application, deviations (from published values) in performance may occur. Our
guarantee is therefore limited to the quantity of the supplied material.

FLEXICRETE Ver00: Date 04/11/2017 Page 1

TECHNICAL DATA SHEET
FLEXICRETE
Flexible Cementitious Waterproofing 2K

Concrete topping is recommended for exposed areas

subject to regular traffic.

PHYSICAL PROPERTIES

Pot life at 30 ° C: Approximately 1 hour

Tack free time: Approximately 2 hours depending on
temperature and humidity

COVERAGE
The coverage rate of FLEXICRETE:

-1.2 kg/m2 for 2 coats application to obtain 0.50mm

thickness

-2.4 kg/m2 for 2 coats application to obtain

approximately 1.0mm thickness depending on site
conditions.

Note: Coverage figures are theoretical and due to

wastage factors and the nature of possible substrates,
practical coverage will be reduced.

PACKAGING
FLEXICRETE is available in 18kg-set in a pail.

STORAGE
The shelf life of FLEXICRETE is 12 months when
stored unopened in a cool and dry place.

HEALTH AND SAFETY

FLEXICRETE should be treated with care. Gloves
and goggles should be worn. Any splashes to the skin
or eyes should be washed off with clean water.

FIRE
FLEXICRETE is non-flammable.

Important Note:
The information contained in this leaflet is published to the best of our knowledge an d
is supported by current available data. Hence, subject to the ca re an d me t h od o f
application, deviations (from published values) in performance may occur. Our
guarantee is therefore limited to the quantity of the supplied material.

FLEXICRETE Ver00: Date 04/11/2017 Page 2