HF Series High Flow Pleated Filter Cartridges

Applications
Food & Beverage
RO Pre-Filtration
Process water(Pre-RO, Cooling…)
Ground/Reclaimed/Wastewater
Sea water desalination
Oil & Chemical
Power plant water treatment
Machinery & Equipment

Dimensions
Outer Diameter 154mm
Length 20”, 40”, 60”
HF Series High Flow Pleated Filter Cartridges are made of
depth fine PP non-woven fabrics. The pleated filter cartridge is
single open ended and in diameter of 6inch/152mm, inside to
Material of Constructions
outside flow design ensures that the unwanted particles are Media PP, GF
trapped with the element. One HF filter replaces few standard Cage / Core / End Cap PP
10" filter cartridges to reduce the operating costs and make Sealing Silicone, EPDM, FKM, E-FKM
change out quickly and easily for critical applications. The
multiple layers with depth pleated design provides higher Performance
removal efficiency and longer service life than other cartridges
of equal efficiency. All the PP configuration with good chemical Max. Operating Temperature 80℃
compatibility ensures that can be used for wide applications. Max. Operating DP 2.4 bar@20℃
Recommended Change out DP 2.2 Bar@20°C
Features
Quality
Available in economic/nominal/absolute structure,
particle removal rating from 0.5 to 100 micron Manufactured in a clean room environment
Manufactured according to ISO9001:2015 certified Quality
100% polypropylene components provide wide chemical Management System
compatibility, suitable for use in a variety of fluids

With depth fine non-woven fabrics and scientific design,

the filter is in a good structure, having high dirt holding
Food Contact Compliance
capacity and resulting in longer service life
Materials of construction comply with FDA regulations for
The pleated media in large diameter reduces operating
food and beverage contact use as detailed in the US Code
costs, makes change out quickly and easily and makes
of Federal Regulations 21CFR.
cartridge in longer service life
Materials used to produce filter media and hardware meet
Higher dirt holding capacity with large diameter reduces the specifications for biological safety per USP Class
the changes times of cartridges VI-121℃for plastics.
Passed European Commission Directives (EU10/2011)
 Flow Rate

AHF Flow Rate EHF Flow Rate

100 100
14 14

90 90

12 12
80 0.5μm 80 0.5μm
Pressure Drop (Kpa)

Pressure Drop (Kpa)

Pressure Drop (Psi)

Pressure Drop (Psi)

70 70 10
10
1μm
60 1μm
60
8 8
3μm 50
50

6 40 3μm 6
40
5μm 5μm
30
30 4
4
20μm 10μm 20 20μm 10μm
20 40μm 40μm
70, 100μm 2
2 10
10
70,100μm
0 0
0 0 0 10 20 30 40 50 60
0 10 20 30 40 50 60
Liquid Flow Rate(TPH) Water at 20℃/40inch Liquid Flow Rate (TPH) Water at 20℃/40inch

NHF Flow Rate HFS Flow Rate

100 100
14
14 0.5μm
90

12 12
80 80
0.5μm
Pressure Drop (Kpa)
Pressure Drop (Kpa)

1μm

Pressure Drop (Psi)

Pressure Drop (Psi)

70 10 10

60 1μm 60
8 8
50

3μm 6 40 6
40 3μm
5μm 5μm
30 10μm
4 4
20μm
20 20μm 10μm 20
40μm
70, 100μm 2 2
10

0 0 0 0
0 10 20 30 40 50 60 0 10 20 30 40 50 60
Liquid Flow Rate (TPH) Water at 20℃/40inch Liquid Flow Rate (TPH) Water at 20℃/40inch

Dimensions
Ø161.3±0.5mm
Ø159.5±0.5mm

Ø154±0.5mm

20" 40" 60"

a 528.0±2 1016.0±2 1022.0±2 1538.0±3
 Ordering Information

AHF G0050 P B 20 S

Grade Media Structure Hardware Material Appearance Length Seal Material

AHF (Absolute) G0050 = PP0.5μm P = PP B = Belt 20 = 20'' S = Silicone
NHF (Nominal) G0100 = PP1μm C = Cage 40 = 40'' E = EPDM
EHF (Economic) G0300 = PP3μm 60 = 60'' V = FKM
G0500 = PP5μm F = E-FKM
G1000 = PP10μm
G2000 = PP20μm
G4000 = PP40μm
G7000 = PP70μm
G9900 = PP100μm

HF S 0050 B 20 S P

Hardware Material Media Structure Appearance Length Seal Material Core

S = Glass fiber 0050 = 0.5µm 0500 = 5µm B = Belt 20 = 20” S = Silicone Blank = No
0100 = 1µm 1000 = 10µm C = Cage 40 = 40” E = EPDM P = PP core
0300 = 3µm 2000 = 20µm 60 = 60” V = FKM
F = E-FKM

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness
for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct
thorough qualification testing to assure the product functions as required.

Hangzhou Darlly Filtration Equipment Co.,Ltd.

Add:Xindeng Industrial Park, Fuyang, Hangzhou, Zhejiang Province, 311404, China
Tel:+86 571 63210677 63210177 Fax:+86 571 63256383
E-mail:[email protected] Web:www.darllyfiltration.com