MTAG Technical-Sheet en
MTAG Technical-Sheet en
MTAG Technical-Sheet en
/ MTAG
MV Voltage detector 1 - 69 kV
See online
technical sheet
/ Standards
IEC 61243-1 VOLTAGE DETECTORS CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 kV A.C. CE:
Compliance with European directives.
/ Use
These voltage detectors are designed for “proving dead”, making sure that nominal voltage is actually absent on
a circuit in an HV distribution system between 1 kV and 69 kV (no-voltage verification):
• The device will detect any nominal voltage on overhead lines andstations.
• It will avoid detecting most induced voltages in order to allowgrounding operations.
/ Technical specifications
AC voltage range possible choice from 1 - 4 kV to 69 kV
Network frequency: 50 and 60 Hz
• Permanent standby status with automatic wake up function
• The presence of voltage within the calibrated range or above is indicated by a RED light and abeeping sound
• Self test OK the OK status (ready for use) of the device is indicated by a GREEN light
• The self test checks all the circuits, the reference detection level and the battery voltage
• The “ready for use” state is indicated by the green indication for 15 minutes
• A low battery level is indicated by an ORANGE light
• Designed for outdoor and indoor use
• Operating temperature : -25° C to 55°C
• Humidity 96 max
• Power supply voltage 9 V alkaline cell IEC 6 LR 61
• Accepts the use of rechargeable battery with identical supply voltage
• Yellow polycarbonate housing
• Dimensions Ø 59 mm, L 280 mm without the contact electrode
• Net weight 0,390 kg with stick adaptor
• Operating manual with a choice of languages, depending on the package
/ Table legend
Other stick adaptors available on request. Metal case available on request.
Document not contractually binding, errors and omissions excepted
pentaesp.com
Technical sheet
Advantages
pentaesp.com