DOOR SCHEDULE

NOTES
ALL DIMENSIONS ARE IN mm
UNLESS OTHERWISE STATED
DRAWINGS ARE NOT TO BE
SCALED.ALL FIGURED
900 DIMENSIONS TO BE USED
1,800 900 900 1,800
THE CONTRACTOR MUST CHECK
AND VERIFY ALL DIMENSIONS
BEFORE COMMENCEMENT
OF ANY WORK
900

2,100
CONSTRUCTION

2,100

2,100

2,100

2,100
ALL SLAB AT GROUND LEVEL TO
BE POURED OVER 1000 GAUGE

900
POLYTHENE SHEET ON 50MM
THICK MURRAM BLINDING
ON HARDCORE

50
ALL SOIL UNDER SLAB,AROUND
AND UNDER FOUNDATION TO
BE POISONED FOR TERMITE
CONTROL
CIVIL
ALL SOIL ON CUT EMBANKMENT
TO BE STABILIZED.THE SLOPE
NOT TO EXCEED THE NATURAL
ANGLE OF REPOSE
STRUCTURAL
DOOR DESCRIPTION D1 D2 D3 D4 D5 D6 ALL BLACK COTTON SOIL TO BE
REMOVED FROM ALL BUILDINGS
NO. REQUIRED 2 2 19 2 2 1 AND PAVED SURFACES
FOR ALL R.C. WORK REFER TO
FRAME
1.6mm PRESSED STEEL FRAME WITH SINGLE 1.6mm PRESSED STEEL FRAME WITH SINGLE 1.6mm PRESSED STEEL FRAME WITH SINGLE 1.6mm PRESSED STEEL FRAME WITH SINGLE 1.6mm PRESSED STEEL FRAME WITH SINGLE 1.6mm WOODEN FRAME WITH SINGLE REBATE TO
REBATE TO ACCEPT DOOR LEAF SIZE OF 1800 x REBATE TO ACCEPT DOOR LEAF SIZE OF 900 REBATE TO ACCEPT DOOR LEAF SIZE OF 1800 x
S.E.'S DETAILS
REBATE TO ACCEPT DOOR LEAF SIZE OF 900 x REBATE TO ACCEPT DOOR LEAF SIZE OF 900 ACCEPT DOOR LEAF SIZE OF 900mm x 2100mm. SUPPLY
2100mm. SUPPLY COMPLETE WITH 1,5 PAIRS OF x 2100mm. SUPPLY COMPLETE WITH 1,5 PAIRS x 900mm. SUPPLY COMPLETE WITH 1,5 PAIRS 2100mm. SUPPLY COMPLETE WITH 1,5 PAIRS OF COMPLETE WITH 1,5 PAIRS OF STEEL BUTT HINGES DEPTH OF FOUNDATION TO BE
CONSTRUCTION
2100mm. SUPPLY COMPLETE WITH 1,5 PAIRS
STEEL BUTT HINGES PER SIDE. RED OXIDE OF STEEL BUTT HINGES. RED OXIDE OF STEEL BUTT HINGES. RED OXIDE OF STEEL BUTT HINGES. RED OXIDE STEEL BUTT HINGES PER SIDE. RED OXIDE PER SIDE. WOOD PRIMERED, PAINTED 2 COATS DETERMINED ON SITE TO S.E.'S
PRIMERED, PAINTED 2 COATS ENAMEL COLOUR PRIMERED, PAINTED 2 COATS ENAMEL PRIMERED, PAINTED 2 COATS ENAMEL PRIMERED, PAINTED 2 COATS ENAMEL PRIMERED, PAINTED 2 COATS ENAMEL COLOUR ENAMEL COLOUR AS PER FINISHING SCHEDULE
AS PER FINISHING SCHEDULE COLOUR AS PER FINISHING SCHEDULE COLOUR AS PER FINISHING SCHEDULE APPROVAL
COLOUR AS PER FINISHING SCHEDULE AS PER FINISHING SCHEDULE
1800 x 2100 x 40mm SEMI-SOLID CORE
ALL WALLS LESS THAN 150MM
900 x 2100 x 40mm SEMI-SOLID CORE 900 x 2100 x 40mm SEMI-SOLID CORE
DOOR
900 x 2100 x 40mm SEMI-SOLID CORE 900 x 900 x 40mm SEMI-SOLID CORE 1800 x 2100 x 40mm SEMI-SOLID CORE
POWDERCOATED ALUMINUIM CLADDED FLUSHPANEL SINGLE DOOR WITH FLUSHPANEL SINGLE DOOR WITH POWDERCOATED ALUMINUIM POWDERCOATED ALUMINUIM CLADDED FLUSHPANEL SINGLE DOOR WITH 7,5mm THICK TO BE REINFORCED WITH
DOUBLE DOOR WITH REBATED EDGE WITH 7,5mm HARDWOOD EDGE, PAINTED 7,5mm HARDWOOD EDGE, PAINTED. CLADDED SINGLE DOOR DOUBLE DOOR WITH REBATED EDGE HARDWOOD EDGE, PAINTED.WITH 4mm HOOP IRON AT EVERY ALTERNATE
CONSTRUCTION 600X600mm NAT. ANODISED ALUMINUIM
VENTILATION GRILL FITTED TO DOORS
DOOR TO BE UNDERCUT BY 50mm GLAZING ON PANELS. DOOR TO BE UNDERCUT
BY 50mm
COURSE
ALL ADJACENT R.C. WORK AND
B2093 DOOR HANDLE WITH DOUBLE OVAL 'CONWAYS' B2313/ 2314 PICTOGRAM AND B2281 B2739 HAT & COAT HOOK, B2644 B2093 DOOR HANDLE WITH DOUBLE OVAL B2739 HAT & COAT HOOK, B2644 PULL
B2093 DOOR HANDLE WITH MASONRY WALLS TO BE TIED
DOOR FURNITURE CYLINDER LOCKSET, FLUSHBOLT TO BE
PROVIDED, B2384 CABIN HOOK (200mm) FINISH
PULL HANDLE FINISH: SC, 'DORMA; TS73
DOOR CLOSER, 300x150mm ALUM PUSH PLATE,
PULL HANDLE SC FINISH, B2579
INDICATOR BOLT, AA FINISH.
DOUBLE OVAL CYLINDER
LOCKSET,
CYLINDER LOCKSET, FLUSHBOLT TO BE
PROVIDED, B2384 CABIN HOOK (200mm)
HANDLE SC FINISH, B2579 INDICATOR
BOLT, AA FINISH. ALL BY 'CONWAYS' WITH STRIP IRON AT EVERY
SC. ALL BY 'CONWAYS' 'CONWAYS' B2390 FLOOR MOUNTED DOOR ALL BY 'CONWAYS' FINISH SC. ALL BY 'CONWAYS' ALTERNATE
STOP FINISH: SC, ALUM ESCUTCHEON WITH MECHANICAL
DOUBLE CYLINDER LOCK
ALL PLUMBING AND DRAINAGE

WINDOW SCHEDULE
12 12 TO COMPLY WITH RELEVANT
75
200 LOCAL AUTHORITY
387121512683 15 75x20mm hw architrave. SVP DENOTES SOIL VENT PIPE
75x20mm hw architrave. Finish to schedule. TO BE PROVIDED AT THE END OF

12
THE DRAINAGE SYSTEM
45mm timber door to schedule. R.C beam to S.E's details. DRAIN PASS BENEATH

50
LINTEL LINTEL
BUILDINGS AND DRIVEWAYS
VENT
VENT LIGHT TO BE ENCASED IN 150MM
LIGHT Finish to schedule. CONCRETE SURROUND

58
OPENABLE
CILL CASEMENT STORM DRAIN PIPES TO COMPLY
DEAD

3 6 1512783

386121512783
2 3
WITH BS556 SPECIFICATIONS

200
LIGHT
75x20mm hw architrave.
ALL UNDERGROUND FOUL AND

75

75
Sw packing piece. WASTE DRAIN PIPES SHALL BE

12
CILL
uPVC TO COMPLY WITH BS 5255

93
222x45 hw frame.

8
ALL INSPECTION CHAMBER
222x45 hw frame. COVERS AND FRAMING SHALL

15
3 14
BE CAST IRON
W1 W2

12
WINDOW DESCRIPTION 75x20mm hw architrave.
3 14
93
2 3
58 50 MINIMUM SLOPE IN THE DRAIN
8 12 12
3 7 15 6 3 8 PIPES TO BE IN 100
QUANTITY 36
PURPOSE MADE ALUMINIUM WINDOW WITH
10 75 Finish to schedule. 75x20mm hw architrave.
45mm timber door to schedule. NO CHASES WILL BE ALLOWED
FOR PIPES ,SLEEVES WILL BE
PURPOSE MADE ALUMINIUM WINDOW WITH

WINDOW FRAME OPENING ALUM SECTION

FINISH TO BE NATURAL ANODISED ALUMINIUM
OPENING ALUM SECTION
FINISH TO BE NATURAL ANODISED ALUMINIUM
TIMBER DOOR JAMB DETAIL:SCALE: 1:2
45
ALLOWED WITH WRITTEN
APPROVAL OF STRUCTURAL
FULL DETAIL DRAWINGS TO BE SUBMITTED TO FULL DETAIL DRAWINGS TO BE SUBMITTED TO
ARCHITECT FOR APPROVAL PRIOR TO ARCHITECT FOR APPROVAL PRIOR TO ENGINEER.NO CUTTING OF
MANUFACTURING MANUFACTURING TIMBER DOOR HEAD DETAIL:SCALE: 1:2 CONCRETE WITHOUT EXPRESS
AND WRITTEN INSTRUCTIONS
GLASS OBSCURED GLASS AS PER SPECIALIST ONE SIDE TINTED GLASS AS PER SPECIALIST
10mm thick clear glass. Rugged end steel tail piece anchor
FROM THE STRUCTURAL
ALL WINDOWS TO COMPLY WITH THE
cast insitu. ENGINEER
GENERAL NOTE STANDARD NATIONAL BUILDING
REGULATIONS FOR GLAZING
ALL WINDOWS TO COMPLY WITH THE
STANDARD NATIONAL BUILDING
REGULATIONS FOR GLAZING
ALL TESTING OF PIPES MUST
10mm bar welded onto frame to hold glass panel. BE COMPLETED BEFORE
Masonry walling. See plan. PLASTERING
12 12 50x37.5mm heavy duty R.H.S steel frame painted
200 to approval. ALL MECHANICAL WORKS
25x33 o/a steel casement MUST BE COORDINATED
200X50mm pull handle on both sides. Finish to schedule.
sash framing. WITH ELECTRICAL AND ANY
3mm clear glass in glass putty 3 3 12 50x25mm R.H.S frame. 12 3 3 CONFLICT MUST BE CLARIFIED
12 24

Rugged end steel tail piece 31 31 BEFORE WORK BEGINS

12 13

12 13
anchor cast insitu.
Masonry walling Finish as per schedule. r.c beam to S.E's detail. PV DENOTES PERMANENT
Cylinder dead lock 10mm thick clear glass. VENTILATION
200

masterkeyed
ex 25x125mm thick window ELECTRICAL
4no heavy duty hinges screwed to frame.
board painted to approval. ALL CONDUITS MUST BE LAUD
25 12

12

10 Masonry walling. BEFORE PLASTERING

Mastic asphalt pointing. 20 25x33 o/a steel casement 50x37.5mm heavy duty R.H.S frame.
Wall finish as per schedule. VALLYVAL LTD.
50x25mm R.H.S frame. Finish to schedule.
sash framing. Street:Popo Street
25

Cill line.
Cement/ sand jointing. Cement/ sand jointing. City:Nairobi
12

PLAN: SCALE: 1:5 Finish to schedule. State/Country:Kenya

20

10x10mm lock keeper. Postal Code:00100

20mm quadrant timber bead 10x10mm drip mould. STEEL DOOR JAMB DETAIL: SCALE: 1:2
80

STEEL DOOR JAMB DETAIL:SCALE: 1:2 JOB TITLE:PROPOSED MINI

60

250x80mm bevelled 120 120 STADIUM ON LR. NO. 209/18221,

precast concrete cill NAIROBI FOR UNIVERSITY OF
10 10x10mm drip mould. 3mm clear glass in glass putty NAIROBI P.O BOX 29288-00100
12

15 15 NRB
Wall finish as per schedule. HEAD DETAIL:SCALE: 1:2
DRAWING TITLE:
Masonry walling ROOF DETAILS
Drawn by Date: 31/5/2012
Valentine Makena Munyua
Checked by Date
Drawing Scale 1:100
JOB NO. LL1/2012
SILL DETAIL: SCALE: 1:2 Drawing no.007