Scribd
Upload
51 views8 pages

Lecture 3 Network Topology

Uploaded by

ahmedmangi543
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
51 views8 pages

Lecture 3 Network Topology

Uploaded by

ahmedmangi543
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 8

Lecture #03

Types of Network Topology


Network Topology is the schematic description of a network arrangement,
connecting various nodes(sender and receiver) through lines of connection.

BUS Topology
Bus topology is a network type in which every computer and network device is
connected to single cable. When it has exactly two endpoints, then it is called Linear
Bus topology.

Features of Bus Topology

1. It transmits data only in one direction.


2. Every device is connected to a single cable

Advantages of Bus Topology

1. It is cost effective.
2. Cable required is least compared to other network topology.
3. Used in small networks.
4. It is easy to understand.
5. Easy to expand joining two cables together.

Disadvantages of Bus Topology


1. Cables fails then whole network fails.
2. If network traffic is heavy or nodes are more the performance of the network
decreases.
3. Cable has a limited length.
4. It is slower than the ring topology.

RING Topology
It is called ring topology because it forms a ring as each computer is connected to
another computer, with the last one connected to the first. Exactly two neighbours for
each device.

Features of Ring Topology

1. A number of repeaters are used for Ring topology with large number of nodes,
because if someone wants to send some data to the last node in the ring
topology with 100 nodes, then the data will have to pass through 99 nodes to
reach the 100th node. Hence to prevent data loss repeaters are used in the
network.
2. The transmission is unidirectional, but it can be made bidirectional by having 2
connections between each Network Node, it is called Dual Ring Topology.
3. In Dual Ring Topology, two ring networks are formed, and data flow is in
opposite direction in them. Also, if one ring fails, the second ring can act as a
backup, to keep the network up.
4. Data is transferred in a sequential manner that is bit by bit. Data transmitted,
has to pass through each node of the network, till the destination node.

Advantages of Ring Topology

1. Transmitting network is not affected by high traffic or by adding more nodes,


as only the nodes having tokens can transmit data.
2. Cheap to install and expand

Disadvantages of Ring Topology

1. Troubleshooting is difficult in ring topology.


2. Adding or deleting the computers disturbs the network activity.
3. Failure of one computer disturbs the whole network.

STAR Topology
In this type of topology all the computers are connected to a single hub through a
cable. This hub is the central node and all others nodes are connected to the central
node.
Features of Star Topology

1. Every node has its own dedicated connection to the hub.


2. Hub acts as a repeater for data flow.
3. Can be used with twisted pair, Optical Fiber or coaxial cable.

Advantages of Star Topology

1. Fast performance with few nodes and low network traffic.


2. Hub can be upgraded easily.
3. Easy to troubleshoot.
4. Easy to setup and modify.
5. Only that node is affected which has failed, rest of the nodes can work
smoothly.

Disadvantages of Star Topology

1. Cost of installation is high.


2. Expensive to use.
3. If the hub fails then the whole network is stopped because all the nodes
depend on the hub.
4. Performance is based on the hub that is it depends on its capacity
MESH Topology
It is a point-to-point connection to other nodes or devices. All the network nodes are
connected to each other. Mesh has n(n-1)/2 physical channels to link n devices.
There are two techniques to transmit data over the Mesh topology, they are :

1. Routing
2. Flooding

MESH Topology: Routing


In routing, the nodes have a routing logic, as per the network requirements. Like
routing logic to direct the data to reach the destination using the shortest distance.
Or, routing logic which has information about the broken links, and it avoids those
node etc. We can even have routing logic, to re-configure the failed nodes.

MESH Topology: Flooding


In flooding, the same data is transmitted to all the network nodes, hence no routing
logic is required. The network is robust, and the its very unlikely to lose the data. But
it leads to unwanted load over the network.

Types of Mesh Topology


1. Partial Mesh Topology : In this topology some of the systems are connected
in the same fashion as mesh topology but some devices are only connected
to two or three devices.
2. Full Mesh Topology : Each and every nodes or devices are connected to
each other.

Features of Mesh Topology

1. Fully connected.
2. Robust.
3. Not flexible.

Advantages of Mesh Topology

1. Each connection can carry its own data load.


2. It is robust.
3. Fault is diagnosed easily.
4. Provides security and privacy.

Disadvantages of Mesh Topology

1. Installation and configuration is difficult.


2. Cabling cost is more.
3. Bulk wiring is required.

TREE Topology
It has a root node and all other nodes are connected to it forming a hierarchy. It is
also called hierarchical topology. It should at least have three levels to the hierarchy.
Features of Tree Topology

1. Ideal if workstations are located in groups.


2. Used in Wide Area Network.

Advantages of Tree Topology

1. Extension of bus and star topologies.


2. Expansion of nodes is possible and easy.
3. Easily managed and maintained.
4. Error detection is easily done.

Disadvantages of Tree Topology

1. Heavily cabled.
2. Costly.
3. If more nodes are added maintenance is difficult.
4. Central hub fails, network fails.

HYBRID Topology
It is two different types of topologies which is a mixture of two or more topologies.
For example if in an office in one department ring topology is used and in another
star topology is used, connecting these topologies will result in Hybrid Topology (ring
topology and star topology).
Features of Hybrid Topology

1. It is a combination of two or topologies


2. Inherits the advantages and disadvantages of the topologies included

Advantages of Hybrid Topology

1. Reliable as Error detecting and trouble shooting is easy.


2. Effective.
3. Scalable as size can be increased easily.
4. Flexible.

Disadvantages of Hybrid Topology

1. Complex in design.
2. Costly.

You might also like