Ultra low distortion series 12S320
Neodymium Ultra Low Distortion Low Midrange Driver
Features:
98dB sensitivity 1W/1m
500W Power handling
3” copper sandwich voice coil for low power compression
Double treated cone for water protection
Triple aluminium demodulating rings for ultra low distortion
Optimal for compact 2 or 3-way systems
SPECIFICATIONS
APPLICATION Compact 2 or 3-way
Nominal impedance Ohm 8
Power handling AES noise W 500
Sensitivity ( 1W/1m ) dB 98
Frequency response Hz 45 - 2500
Voive coil diameter mm 77 (3”)
Voice coil material Cu
Voice coil winding depth mm 19
Magnet gap depth mm 10 48
Basket Cast Aluminium 135
149
Effect. diaphragm diameter D mm 260
THILE – SMALL PARAMETERS
Frequency response measured 100W (28,3V)@ 1m in a closed
Resonance frequency Fs Hz 43.8
enclosure of 50 litre in an anechoic chamber incl. 2nd and
DC resistance Re Ohm 5.70
Mechanical Q factor Qms 4.80
3rd harmonic distortion raised 20dB.
Electrical Q factor Qes 0.21
Total Quality factor Qts 0.20
Equivalent volume Vas L 68.60
Moving mass Mms kg 0.076
Mechanical compl. Cms mm/N 0.174
BL factor BL Tesla/m 23.80
Effective piston area Sd m2 0.0531
Max. linear excursion Xmax mm 4.50
Voice coil inductance Le1k µH 1.33
Le10k µH 0.61
MOUNTING INFORMATION
Overall diameter mm 315
Mounting holes diameter mm 7x8
Bolt circle diameter mm 300
Baffle cut-out diameter mm 283
Overall depth mm 149
Net weight kg 7.8
Recommended reflex enclosure:
10L/77Hz, -3dB=103Hz, BRD=70mm/132mm long
25L/63Hz, -3dB=68Hz, BRD=90mm/106mm long
BMS Elektronik GmbH · Boulevard der EU 6 · 30539 Hannover · Expo Park · Germany
phone: +49 (0) 511 - 879 38 98 · fax: +49 (0) 511 - 879 39 01 · e-mail: [email protected] ·internet: www.codaaudio.com
