Scribd
Upload
122 views12 pages

Eye Sensor User Manual

Uploaded by

Saif Belloumi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
122 views12 pages

Eye Sensor User Manual

Uploaded by

Saif Belloumi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

EYE SENSOR / BTSMP1

Introduction
Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our brand-new and certified
Bluetooth Low Energy ID sensor model from Teltonika with robust waterproof casing and a long-lifetime battery. The model is designed for a
low-cost fast and easy configuration and integration to save precious time, resources, and ensure accountability.
About BTSMP1
Perfect for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers, containers), agriculture (tractor
attachments), and constructions (tools and inventory). Sensors data makes it especially suitable for cold chain refrigerator use cases. The built-
in accelerometer can detect item movement, pitch and roll of the device. Magnet detection can be used for wireless open/close detection and
notifications such as trailer door events, etc. EYE sensor supports iBeacon and Eddystone protocols. The device is fully compatible with the
Teltonika firmware platform which provides extended functionality. Configure, scan, and update anytime anywhere with a dedicated Teltonika
mobile app

Product Specification
Features
Functionalities

Beacon ID, LED, Temperature, Humidity, Accelerometer, Magnet detection

Dimensions and weight

Dimensions 56,6 mm x 38 mm x 13 mm

Weight 18g
Battery and power

Model CR2450

Type Type Lithium, Manganese Dioxide

Total Capacity 600 mAh

Replaceable No

Battery life (Tx=2 dBm; interval: 3 s) 2.5+ years

Battery life (Tx=2 dBm; interval: 5 s), default 4+ years

Battery life (Tx=2 dBm; interval: 10 s) 5+ years

Connectivity

Bluetooth 4.2 compliant,


Bluetooth
Bluetooth 5.2 certified
Range 80 m
Available transmission power levels Up to 8 dBm
Sensitivity -88 dBm

Casing

Protection IP67

Mounting Two holes to screw/leash/strip, tape

Customization Custom logo upon request (Special conditions)

Environmental Requirements

Humidity (non-condensing) From 0% to 100%

Operational temperature -20°C / +60°C (-4°F / +140°F)

Protocols compatibility

Yes
iBeacon
*iOS doesn't show devices with iBeacon protocol
Eddystone Yes
EYE Sensor Yes

Dimensions

Mounting recomendations
EYE App Configuration
Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
• Transmitting at 2 dBm power.
• Data advertising at 1 second intervals.
• Eddystone and Sensors protocol

If you would like to change these settings you will need to:
1) Download and install EYE APP - Teltonika application to change sensor settings.

Eye App Overview


With the application you will be able to scan for visible Teltonika EYE devices, check their statuses or connect for configuration or
firmware update.
Devices in view
In this window you will see all visible devices. You have options to see devices in Short list or in default list. When looking at devices in default
list you will be able to open Detailed view of devices and check transmitted data statuses. Additionaly if you are looking for specific devices you
will be able to use Search function to filter search options. When in this window select a device of your choice to connect and after passing pin
code (default pin code is 123456) you will go to device overview window.
Overview window
In overview window you can see device details, check firmware version and update if available , go to device configuration settings. If you select
to Configure device new window will open with Basic and Advanced settings.

Configure window
In this window you can check and change device configuration settings. In main tab Basic Settings you can change main settings. Change
Device name, Power signal strength, Advertising interval and Packet transmission type*. For more settings go to Advanced settings tab to
enable various events.

Advanced configuration window

Advanced configuration: Beacon Settings


In Advanced settings tab you can can configure EYE beacon sensor parameters: Beacon information (iBeacon ID*, Eddystone ID).
UUID/MINOR/MAJOR parameter can be changed for iBeacon ID*. Namespace ID/Instance ID can be changed for Eddystone ID. If you scroll
down you will be able to adjust Sensor reading interval and event settings of the EYE Sensor Note: iOS doesn't show devices with iBeacon
protocol

Advanced configuration: Sensor reading and events

!NOTE: These settings are no longer available after EYE APP 1.2.0-60 update.

Temperature event - adjust if the


Magnetic field event - adjust if the Humidity event - adjust if the device Movement event - adjust
device generates events based on
device generates events based on generates events based on entrance or movement/stop detection and timeouts it
entrance or exit to selected temperature
detection or exit (loss) of the magnet. exit to selected humidity range takes to register movement / stopping
range
Maximum event duration - how long Event advertising settings - advertising Sensor reading interval - how often
will one event be advertised period after event detection values are updated by the device

You might also like