Scribd
Upload
249 views2 pages

Fagor MKT Encoder

Linear Scale

Uploaded by

azhar.engg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
249 views2 pages

Fagor MKT Encoder

Linear Scale

Uploaded by

azhar.engg
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

I N C R E M E N T A L

M series
LINEAR

Designed for applications on standard machines with travels


General specification up to 1540 mm. With reference marks every 50 mm or
distance-coded and detachable cable connector built into
Measurement By means of graduated glass scale,
with 20 μm etching pitch the reader head (except the MK series where the reader head
comes standard with a 3-meter attached cable).
Maximum speed 60 m/min
Maximum vibration 3g
Moving thrust <5N
Measuring lengths in millimeters

Operating
40 (*) • 70 • 120 • 140 • 170 • 220 • 270 • 320 • 370
0 ºC...50 ºC 420 • 470 • 520 • 620 • 720 • 770 • 820 • 920 • 1020
temperature
Storage temperature -20 ºC...70 ºC
1140 • 1240 • 1340 • 1440 • 1540

Weight 0.58 kg + 0.6 kg/m (*) On MT and MX models.

Relative humidity 20...80%


Protection IP 53 (standard)
IP 64 (DIN 40050) using pressurized air in
linear encoders at 0.8 ± 0.2 bar
With detachable cable connector
Reader head
(except MKT and MKX)

Specific characteristics
MT MX MP
MTD MKT MKX
MOT MOX MOP

Accuracy ± 10 μm ± 5 μm ± 10 μm ± 5 μm

Resolution 5 μm 1 μm Up to 0.1 µm

MKT and MKX: I0 every 50 mm


Reference marks (I0) MT, MTD, MX and MP: I0 every 50 mm
MOT, MOX and MOP: Distance-coded I0
Output signals TTL TTL differential 1 Vpp

T period of output signals 20 µm 4 µm 20 µm

Limit frequency 50 kHz 250 kHz 50 kHz

Maximum cable length 20 m 50 m 20 m 50 m 150 m

5V ±10%, <100 mA
Supply voltage 5 V ±5% ,100 mA (without load)
(without load)

10
M model Dimensions in mm

Air intake at both ends (M5)


I0 every 50 mm
Centered point for Ø3 dowel pin
Distance-coded Machine way
Measuring length
MK model

Air intake at both


ends (M5)
Centered point for Ø 3
dowel pin

Machine way Measuring


lengths (CM)
Measuring length
For CM ending in 20 A= 10

For CM ending in 40 A= 20
I0 every 50 mm
For CM ending in 70 A= 35

Order identification
Example for an incremental encoder : MOP - 425

M O P 42 5
Type of profile: Type of reference mark I0: Type of signal: Measuring lengths Accuracy of the linear
in cm: encoder:
M: for limited • Blank space: Incremental, one • T: 5 μm resolution TTL
spaces mark every 50 mm • TD: 5 μm resolution differential TTL In the example • 5: ± 5 μm
• O: Absolute distance-coded • X: 1 μm resolution differential TTL (42) = 42 cm = 420 mm • B
 lank space: ± 10 μm
marks • P: 1 Vpp sinusoidal

11

You might also like