Bio175 - MSDSEN

MSDS(MATERIAL SAFETY DATA SHEET)
Date updated : 2007. 10. 23.
Section 1- PRODUCT & COMPANY INFORMATION
PRODUCT NAME : BIOGENIC 175

GENERAL CHEMICAL CHARATERISTIC : LIQUID DETERGENT
USE : PU MOLD CLEANER
INFORMATION OF MANUFACTURER
- NAME : TECHNICK PRODUCTS INC
- ADDRESS : 357 WILSON AVENUE, NEWYORK, NJ 07105 U.S.A.
- PHONE : (201)817-9605
- ISSUED BY : TECHNICAL DIRECTOR
Section 2 – COMPOSITION/INFORMATION ON INGREDIENT
COMPONENT CAS-No Composition
Proprietary blend of ethyl & methyl derivative of butyrolactam,

1119-40-0 100 %
esters of hydroxy propionic acid, Dibasic ester & surfactant
Section 3 – HAZARDS IDENTIFICATION
EXPOSURE LIMIT : NOT KNOWN

EFFECTS FO OVEREXPOSURE INHALATION : NOT KNOWN
INGESTION : N/D
SKIN OR EYE CONTACT : Moderate irritation.
Section 4 – FIRST AID MEASURES
EMERGENCY AND FIRST AID PROCEDURES

-INHALATION : IMMEDIATELY leave the contaminated area; take deep breaths of fresh air.
-SKIN CONTACT : IMMEDIATELY flood affected skin thoroughly with soap and water.
-EYE CONTACT : Flush eyes with water for at least 15 min. Get medical attention immediately.
-INGESTION : Immediately transport the victim to a hospital.
Section 5 – FIRE FIGHTING MEASURES
FLASH POINT (and method used) : 81 ~ 93C

FLAMMABLE LIMITS IN AIR(% BY VOLUME) : N/A
AUTOIGNITION TEMPERATURE : N/A
EXTINGUISHING MEDIA : USE DRY CHEMICALS, CO 2, WATER, FOAM.
FIRE FIGHTING PROCEDURES : Fire Fighters should wear proper protective equipment and self-contained
breathing to protect against potentially toxic and irritating fumes.
UNUSUAL FIRE & EXPOLSION HAZARD DATA : Combustible liquid will burn exposed flame. May released
flammable vapors if heated in confined space above flash point.
Section 6 – ACCIDENTAL RELEASE MEASURES
SPILL AND LEAK PROCEDURE : Recover spilled material with rags or absorbent material for large spills,
use vacuum truck.
For safety and environmental precautions, please review entire MSDS, for necessary information.
Section 7 – HANDLING AND STORAGE
STORAGE TEMPERATURE : Between 50F and 95F. Do not freeze.

HANDLING/STORAGE : Keep tightly closed container. During processing, ensure efficient exhaust ventilation in
the working area.
Section 8 – EXPOSAL CONTROLS
VENTILATION : General ventilation is adequate.

RESPIRATOR : No special respirator. If fume or mist occurs, approved measures are needed.
EYE PROTECTION : Not necessary.
GLOVE : Wear polyvinyl or rubber gloves.
CLOTHING : Uniforms or a lab coat should be worn. No special clothing required.
Section 9 – PHYSICAL/CHEMICAL PROPERTIES
APPEARANCE AND ODOR : Colorless or Light orange color Liquid

BOILING POINT(760 mmHg) : Approx., 160 ~ 195 C
SPECIFIC GRAVITY(H2O = 1) : 1.00 ~ 1.30 g/ml
SOLUBILITY IN H2O(% BY WT) : 100%
Section 10 - STABILITY AND REACTIVITY
STABILITY(normal conditions) : Stable.

CONDITIONS TO AVOID : Not known.
HAZARDOUS DECOMPOSITION PRODUCTS : Irritating vapors are generated when heated.
HAZARDOUS POLYMERIZATION : Will not occur.
Section 11 – TOXICOLOGICAL INFORMATION
N/D
Section 12 – ECOLOGICAL INFORMAITON
 Do not release to the environment without chemical precipitation/flocculation.
Section 13 – DISPOSAL CONSIDERATIONS

WASTE DISPOSAL METHODS : Waste disposal should be in accordance with existing Federal, state and
local environmental regulations.
Section 14 – TRANSFORT INFORMATION
The dot classification listed below may not always apply shipments of this product. Consult the bill of lading for
appropriate transport information.
U.S DOT PROPER SHIPPING NAME : N/D
HAZARD CLASS AND DIVISION : N/D
UN/NA NO. : N/D
STANDARD PACKING(NET, kg/drum) : 200kg/drum
HAZARD LABEL : N/D
Section 15 – REGULATORY INFORMATION
EC risk and safety phrases

R20 : Harmful by inhalation.
R22 : Harmful if swallowed.
R36/37 : Irritation to eyes and respiratory system.
S2 : Keep out of reach of children.
S9 : Keep container in a well – Ventilated place.
S16 : Keep away from sources of ignition – No smoking.
S25 : Avoid contact with eyes.
S26 : In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S29 : Do not empty into drains.
S33 : Take precautionary measures against static charge.
S38 : In case of insufficient ventilation, wear suitable respiratory equipment.
Section 16 – OTHER INFORMATION
N/D

Bio175 - MSDSEN

Uploaded by

Copyright:

Available Formats

Bio175 - MSDSEN

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Bio175 - MSDSEN

Uploaded by

Copyright:

Available Formats

MSDS(MATERIAL SAFETY DATA SHEET)

Date updated : 2007. 10. 23.

Section 1- PRODUCT & COMPANY INFORMATION

PRODUCT NAME : BIOGENIC 175

Section 2 – COMPOSITION/INFORMATION ON INGREDIENT

COMPONENT CAS-No Composition

Proprietary blend of ethyl & methyl derivative of butyrolactam,

Section 3 – HAZARDS IDENTIFICATION

EXPOSURE LIMIT : NOT KNOWN

Section 4 – FIRST AID MEASURES

EMERGENCY AND FIRST AID PROCEDURES

Section 5 – FIRE FIGHTING MEASURES

FLASH POINT (and method used) : 81 ~ 93C

Section 7 – HANDLING AND STORAGE

STORAGE TEMPERATURE : Between 50F and 95F. Do not freeze.

Section 8 – EXPOSAL CONTROLS

VENTILATION : General ventilation is adequate.

Section 9 – PHYSICAL/CHEMICAL PROPERTIES

APPEARANCE AND ODOR : Colorless or Light orange color Liquid

Section 10 - STABILITY AND REACTIVITY

STABILITY(normal conditions) : Stable.

Section 11 – TOXICOLOGICAL INFORMATION

Section 12 – ECOLOGICAL INFORMAITON

 Do not release to the environment without chemical precipitation/flocculation.

Section 13 – DISPOSAL CONSIDERATIONS

Section 14 – TRANSFORT INFORMATION

Section 15 – REGULATORY INFORMATION

EC risk and safety phrases

Section 16 – OTHER INFORMATION

You might also like