Composite Pre
Composite Pre
Composite Pre
Table of Contents
1. Introduction
Composite Pre is a collection of functions aiming to organize and simplify the workflow of modeling composite
components. Though the functions in this collection can be run through the Plugins menu, it is much more
efficient to be called from the Composite Pre menu bar which is available when ANSA is launched with the
Composite layout. This layout is a collection of both hardcoded functionality and the additional scripts provided
by this plugin, brought together to simplify the workflow.
2. Execution
The collection of functions this plugin provides can be accessed through the Plugins>Composite Pre from the
menu bar. It is recommended to launch ANSA with the Composite layout, so that the functions are grouped
together with hardcode functions in the Composite Pre menu bar. To do so, activate the Composite layout in the
launcher window:
3. OR Laminates
5. View Rosettes
6. Laminate Report
Converts LAMINATE or PCOMP properties into PSHELL. For every PCOMP zone, the equivalent homogenized
PSHELL property and the respective MAT2 entities that describe the MEMBRANE (MID1), BENDING (MID2),
MEMBRANE-COUPLING (MID4) and TRANSVERSE SHEAR STIFFNESS (MID3), are created.
Select the Laminate/PCOMP properties and confirm by middle mouse click.
Remarks:
1) Works only for NASTRAN Deck.
2) With this conversion the lamination information is hidden and the solution (displacements) is the same as the
PCOMP’s.
This function assigns a Laminate property to the selected Shell elements. The Laminate property is built with
layers of specified thickness. The Laminate is split into zones according to the Nodal or Property Thickness of the
selected Shells.