CME365 – RENEWABLE ENERGY TECHNOLOGIES

RENEWABLE ENERGY TECHNOLOGIES

Unit 1: ENERGY SCENARIO
Module : 1
Indian energy scenario in various sectors – domestic ,industrial, commercial,
agriculture, transportation and others.

INTRODUCTION

Any physical activity in this world, whether carried out by human beings
or by nature, is cause due to flow of energy in one form or the other. The
word ‘energy’ itself is derived from the Greek word ‘en-ergon’, which
means ‘in-work’ or ‘work content’. The work output depends on the
energy input.

Energy is one of the major inputs for the economic development of any
country. In the case of the developing countries, the energy sector assumes
a critical importance in view of the ever- increasing energy needs requiring
huge investments to meet them.

Energy can be classified into several types based on the following

criteria:

 Primary and Secondary energy

 Commercial and Non commercial energy
 Renewable and Non-Renewable energy
 Conventional and Non-conventional energy

Primary and Secondary Energy:

Primary energy sources are those that are either found or stored in nature.

ROHINI COLLEGE OF ENGG. AND TECHNOLOGY

CME365 – RENEWABLE ENERGY TECHNOLOGIES

Common primary energy sources are coal, oil, natural gas, and biomass
(such as wood). Other primary energy sources available include nuclear
energy from radioactive substances, thermal energy stored in earth's
interior, and potential energy due to earth's gravity. The major primary and

secondary energy sources are shown in Figure.

Primary energy sources are costly converted in industrial utilities into secondary
energy sources;

for example coal, oil or gas converted into steam and electricity. Primary
energy can also be used directly. Some energy sources have non energy uses,
for example coal or natural gas can be used as a feedstock in fertilizer plants.

Commercial Energy and Non Commercial Energy

ROHINI COLLEGE OF ENGG. AND TECHNOLOGY

CME365 – RENEWABLE ENERGY TECHNOLOGIES

Commercial Energy

The energy sources that are available in the market for a definite price are
known as commercial energy. By far the most important forms of commercial
energy are electricity, coal and refined petroleum products. Commercial energy
forms the basis of industrial, agricultural, transport and commercial
development in the modern world. In the industrialized countries,
commercialized fuels are predominant source not only for economic
production, but also for many household tasks of general population.

Examples: Electricity, lignite, coal, oil, natural gas etc.

Non-Commercial Energy

The energy sources that are not available in the commercial market for a price
are classified as non-commercial energy. Non-commercial energy sources
include fuels such as firewood, cattle dung and agricultural wastes, which are
traditionally gathered, and not bought at a price used especially in rural
households. These are also called traditional fuels. Non-commercial energy is
often ignored in energy accounting.

Example: Firewood, agro waste in rural areas; solar energy for water heating,
electricity generation, for drying grain, fish and fruits; animal power for
transport, threshing, lifting water for irrigation, crushing sugarcane; wind
energy for lifting water and electricity generation.

Renewable and Non-Renewable Energy

Renewable energy is energy obtained from sources that are essentially in

exhaustible. Examples of renewable resources include wind power, solar power,
geo thermal energy, tidal power and hydro electric power. The most important

ROHINI COLLEGE OF ENGG. AND TECHNOLOGY

CME365 – RENEWABLE ENERGY TECHNOLOGIES

feature of renewable energy is that it can be harnessed without the release of

harmful pollutants.

Non-renewable energy is the conventional fossil fuels such as coal, oil and gas,
which are likely to deplete with time.

Conventional and Non-conventional energy resources:

Conventional Energy

Conventional energy resources which are being traditionally used for many
decades and were in common use around oil crisis of 1973 are called conventional
energy resources, e.g., fossil fuel, nuclear and hydro resources.

Non-conventional energy

Non-conventional energy resources which are considered for large – scale use after
oil crisis of 1973, are called non-conventional energy sources, e.g., solar, wind,
biomass, etc.

ROHINI COLLEGE OF ENGG. AND TECHNOLOGY

CME365 – RENEWABLE ENERGY TECHNOLOGIES

Energy Consumption and Standard Of Living:

The energy consumption of a nation can be broadly divided into the following
areas or sectors depending on energy-related activities. These can be further
subdivided into sub sectors:

 Domestic sector (houses and offices including commercial buildings)

 Transportation sector

 Agriculture sector

 Industry sector

Consumption of a large amount of energy in a country indicates increased activities

in these sectors. This may imply better comforts at home due to use of various
appliances, better transport facilities and more agricultural and industrial
production. All of this amount to a better quality of life. Therefore, the per capita
energy consumption of a country is an index of the standard of living or prosperity
(i.e. income) of the people of the country.

Indian Energy Scenario

Coal dominates the energy mix in India, contributing to 55% of the total primary
energy pro- duction. Over the years, there has been a marked increase in the share
of natural gas in prima- ry energy production from 10% in 1994 to 13% in 1999.
There has been a decline in the share of oil in primary energy production from 20%
to 17% during the same period.

Energy Supply Coal Supply

ROHINI COLLEGE OF ENGG. AND TECHNOLOGY

CME365 – RENEWABLE ENERGY TECHNOLOGIES

India has huge coal reserves, at least 84,396 million tones of proven recoverable
reserves (at the end of 2003). These amounts to almost 8.6% of the world reserves
and it may last for about 230 years at the current Reserve to Production (R/P) ratio.
In contrast, the world's proven coal reserves are expected to last only for 192 years
at the current R/P ratio.

Reserves/Production (R/P) ratio-

If the reserves remaining at the end of the year are divided by the production in
that year, the result is the length of time that the remaining reserves would last if
production were to continue at that level.

India is the fourth largest producer of coal and lignite in the world. Coal
production is concentrated in these states (Andhra Pradesh, Uttar Pradesh, Bihar,
Madhya Pradesh, Maharashtra, Orissa, Jharkhand, and West Bengal).

Oil Supply

Oil accounts for about 36 % of India’s total energy consumption. India today is
one of the top ten oil-guzzling nations in the world and will soon overtake Korea as
the third largest consumer of oil in Asia after China and Japan. The country's
annual crude oil production is peaked at about 32 million tonne as against the
current oil consumption by end of 2007 is expected to reach 136
million tonne(MT), of which domestic production will be only 34 MT. India will
have to pay an oil bill of roughly $50 billion, assuming a weighted average price of
$50 per barrel of crude. In 2003-04, against total export of $64 billion, oil imports
accounted for $21 billion. India imports 70% of its crude needs mainly from gulf
nations. The majority of India's roughly 5.4 billion barrels in oil reserves are
located in the Bombay High, upper Assam, Cambay, Krishna-Godavari. In terms

ROHINI COLLEGE OF ENGG. AND TECHNOLOGY

CME365 – RENEWABLE ENERGY TECHNOLOGIES

of sector wise petroleum product consumption, transport accounts for 42%

followed by domestic and industry with 24% and 24% respectively. India spent
more than Rs.1,10,000 crore on oil imports at the end of 2004.

Natural Gas Supply

Natural gas accounts for about 8.9 per cent of energy consumption in the
country. The current demand for natural gas is about 96 million cubic metres per
day (mcmd) as against availability of 67 mcmd. By 2007, the demand is expected
to be around 200 mcmd. Natural gas reserves are estimated at 660 billion cubic
meters.

Electrical Energy Supply:

The all India installed capacity of electric power generating stations under
utilities was 1,12,581 MW as on 31st May 2004, consisting of 28,860 MW- hydro,
77,931 MW- thermal and 2,720 MW- nuclear and 1,869 MW- wind (Ministry of
Power).

Nuclear Power Supply

Nuclear Power contributes to about 2.4 per cent of electricity generated in India.
India has ten nuclear power reactors at five nuclear power stations producing
electricity. More nuclear reactors have also been approved for construction.

Hydro Power Supply

India is endowed with a vast and viable hydro potential for power generation of
which only 15% has been harnessed so far. The share of hydropower in the
country's total generated units has steadily decreased and it presently stands at 25%
as on 31st May 2004. It is assessed that exploitable potential at 60% load factor is

ROHINI COLLEGE OF ENGG. AND TECHNOLOGY

CME365 – RENEWABLE ENERGY TECHNOLOGIES

84,000 MW.

Final Energy Consumption

Final energy consumption is the actual energy demand at the user end. This is
the difference between primary energy consumption and the losses that takes place
in transport, transmission & distribution and refinement. The actual final energy
consumption (past and projected) is given in the table given below,
TABLE 1.2 DEMAND FOR COMMERCIAL ENERGY FOR
FINAL CONSUMPTION (BAU SCENARIO)

Source Units 1994-95 2001-02 2006-07 2011-12

Electricity Billion Units 289.36 480.08 712.67 1067.88
Coal Million Tonnes 76.67 109.01 134.99 173.47
Lignite Million Tonnes 4.85 11.69 16.02 19.70
Natural Gas Million Cubic 9880 15730 18291 20853
Oil Million Tonnes 63.55 99.89 139.95 196.47
Source: Planning Commission BAU:_Business As Usual

Sector Wise Energy Consumption in India

The major commercial energy consuming sectors in the country are classified as
shown in the Figure. As seen from the figure,
industry remains the biggest consumer of
commercial energy and its share in the overall
consumption is 49%. (Reference year: 1999/2000)
Figure
Sector Wise Energy Consumption (1999-2000)

Energy and Environment

The usage of energy resources in industry leads to environmental damages by

ROHINI COLLEGE OF ENGG. AND TECHNOLOGY

CME365 – RENEWABLE ENERGY TECHNOLOGIES

polluting the atmosphere.

Few of examples of air pollution are sulphur dioxide (SO2), nitrous oxide
(NOX) and carbon

monoxide (CO) emissions from boilers

and furnaces, Chlorofluro carbons (CFC)
emissions from refrigerants use, etc. In
chemical and fertilizers industries, toxic
gases are released. Cement plants

and power plants spew out particulate

matter. Typical inputs, outputs, and emissions for a typical industrial process are
shown in Figure.

Air Pollution

A variety of air pollutants have known or suspected harmful effects on human

health and the environment. These air pollutants are basically the products of
combustion from fossil fuel use. Air pollutants from these sources may not only
create problems near to these sources but also can cause problems far away. Air
pollutants can travel long distances, chemically react in the atmosphere to produce
secondary pollutants such as acid rain or ozone.

Evolutionary Trends in Pollution Problems

both developed and rapidly industrializing countries, the major historic air
pollution problem has typically been high levels of smoke and SO2 arising from
the combustion of sulphur-containing fossil fuels such as coal for domestic and
industrial purposes.

ROHINI COLLEGE OF ENGG. AND TECHNOLOGY

CME365 – RENEWABLE ENERGY TECHNOLOGIES

Smogs resulting from the combined effects of black smoke, sulphate / acid
aerosol and fog have

been seen in European cities until few decades ago and still occur in many cities
in developing world. In developed countries, this problem has significantly reduced
over recent decades as a result of changing fuel-use patterns; the increasing use of
cleaner fuels such as natural gas, and the implementation of effective smoke and
emission control policies.

In both developed and developing countries, the major threat to clean air is now
posed by traffic emissions. Petrol- and diesel engine motor vehicles emit a wide
variety of pollutants, principally carbon monoxide (CO), oxides of nitrogen (NOx),
volatile organic compounds (VOCs) and particulates, which have an increasing
impact on urban air quality.

In addition, photochemical reactions resulting from the action of sunlight on

NO2 and VOCs from vehicles leads to the formation of ozone, a secondary long-
range pollutant, which impacts in rural areas often far from the original emission
site. Acid rain is another long-range pollutant influenced by vehicle NOx
emissions.

Industrial and domestic pollutant sources, together with their impact on air
quality, tend to be steady- state or improving over time. However, traffic pollution
problems are worsening world-wide. The problem may be particularly severe in
developing countries with dramatically increasing vehicle population,
infrastructural limitations, poor engine/emission control technologies and limited
provision for maintenance or vehicle regulation.

The principle pollutants produced by industrial, domestic and traffic sources are
sulphur dioxide, nitrogen oxides, particulate matter, carbon monoxide, ozone,

ROHINI COLLEGE OF ENGG. AND TECHNOLOGY

CME365 – RENEWABLE ENERGY TECHNOLOGIES

hydrocarbons, benzene, 1,3- butadiene, toxic organic micro pollutants, lead and
heavy metals.

ROHINI COLLEGE OF ENGG. AND TECHNOLOGY