X-WIFI-EMW3080B
Data brief
Wi-Fi® firmware update for MXCHIP EMW3080B on STM32 boards
Features
• Wi‑Fi® firmware for the STM32 boards with the MXCHIP EMW3080B module
– With or without bootloader
– With SPI or UART interface
• MXCHIP EMW3080B firmware programmer for the B-U585I-IOT02A board
Description
Several STM32Cube MCU Packages and STM32Cube Expansion Packages make
use of the MXCHIP EMW3080B module for their Wi‑Fi® connectivity.
The X-WIFI-EMW3080B provides a set of Wi‑Fi® firmware in binary format for the
MXCHIP EMW3080B module.
It contains different firmware supporting various configurations: with UART or SPI
interface, with or without MXCHIP EMW3080B bootloader. For a given version, up to
four firmware variants are provided.
The release notes of each related STM32Cube MCU Package specify the compatible
firmware version to be installed by the user.
The X-WIFI-EMW3080B documents also the MXCHIP EMW3080B firmware update
procedure.
Additionally, for the B-U585I-IOT02A board, a programmer application in binary
format is provided as well to make the firmware update procedure easier.
Product status link
X-WIFI-EMW3080B
DB4513 - Rev 1 - July 2021 www.st.com
For further information contact your local STMicroelectronics sales office.
X-WIFI-EMW3080B
General information
1 General information
The X-WIFI-EMW3080B provides software to be run along with STM32 microcontrollers based on Arm® Cortex®
processors.
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
1.1 Ordering information
The X-WIFI-EMW3080B is available for free download from www.st.com.
1.2 What is STM32Cube?
STM32Cube is an STMicroelectronics original initiative to significantly improve designer's productivity by reducing
development effort, time, and cost. STM32Cube covers the whole STM32 portfolio.
STM32Cube includes:
• A set of user-friendly software development tools to cover project development from conception to
realization, among which are:
– STM32CubeMX, a graphical software configuration tool that allows the automatic generation of C
initialization code using graphical wizards
– STM32CubeIDE, an all-in-one development tool with peripheral configuration, code generation, code
compilation, and debug features
– STM32CubeProgrammer (STM32CubeProg), a programming tool available in graphical and command-
line versions
– STM32CubeMonitor (STM32CubeMonitor, STM32CubeMonPwr, STM32CubeMonRF,
STM32CubeMonUCPD) powerful monitoring tools to fine-tune the behavior and performance of STM32
applications in real-time
• STM32Cube MCU and MPU Packages, comprehensive embedded-software platforms specific to each
microcontroller and microprocessor series (such as STM32CubeU5 for the STM32U5 Series), which include:
– STM32Cube hardware abstraction layer (HAL), ensuring maximized portability across the STM32
portfolio
– STM32Cube low-layer APIs, ensuring the best performance and footprints with a high degree of user
control over hardware
– A consistent set of middleware components such as ThreadX, FileX / LevelX, USBX, NetX Duo, USB
Power Delivery, TFM, mbed-crypto, Touch Library, Network Library, OpenBootloader
– All embedded software utilities with full sets of peripheral and applicative examples
• STM32Cube Expansion Packages, which contain embedded software components that complement the
functionalities of the STM32Cube MCU and MPU Packages with:
– Middleware extensions and applicative layers
– Examples running on some specific STMicroelectronics development boards
DB4513 - Rev 1 page 2/5
X-WIFI-EMW3080B
License
2 License
X-WIFI-EMW3080B is delivered under the SLA0048 software license agreement and its Additional License
Terms.
DB4513 - Rev 1 page 3/5
X-WIFI-EMW3080B
Revision history
Table 1. Document revision history
Date Revision Changes
9-Jul-2021 1 Initial release.
DB4513 - Rev 1 page 4/5
X-WIFI-EMW3080B
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2021 STMicroelectronics – All rights reserved
DB4513 - Rev 1 page 5/5
