Scribd
Upload
9 views

Advance Networking Guide

Uploaded by

Kristine Angela Gaid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views

Advance Networking Guide

Uploaded by

Kristine Angela Gaid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

(ADVANCE NETWORKING GUIDE)

“CLIENT PC” GUIDE 1 (Depende na sa PC nimo sa CLIENT kung unsay GUIDE


magamit nimo, GUIDE 1 ba or GUIDE 2)

• RESTART COMPUTER
• PLUG-IN FLASHDRIVE
• “INSTALL NOW”
• “I DON’T HAVE A PRODUCT KEY”
• CHECK BOX THEN ACCEPT
• CUSTOM
• PARTITION
E Delete TANAN, EXCEPT sa “UNALLOCATED”

Click “UNALLOCATED”, Click “NEW”


*C:+ x 1024 = ANSWER(maoy ibutang sa “NEW”), if dili makuha ang need nimo
e *C:+ x 1024 = ANSWER + 350 = ANSWER(maoy ibutang sa “NEW”)
if done naka sa [C:] proceed napod sa [D:]
Click “UNALLOCATED”, Click “NEW” then
*D:+ x 1024 = ANSWER(maoy ibutang sa “NEW”)
if nakuha na tanan, Click “*C:+”, sa *C:+ musulod guys ayg kalimot then Click “NEXT”
pag mag countdown na 10seconds then mupalong ang PC imo dayun “TANGGALON
ang FLASHDRIVE…”

• Wait for installation


• “Volume 2”
• “United State”
• “US”
• “SKIP”
• “I don’t have internet”
• Client002/Admin123456 (kung unsay naka assign saimo mao to ibutang)
• “What was your first pet?”
• “Childhood nickname”
• “City where you live”
• “OK”
• “NEXT”
• “Computer Management”
• DONE!!!
• GO TO “CONTROL PANEL” (to change IP ADDRESS para ma ping sila duha Client and
Server)
• Click “NETWORK AND INTERNET”
• Click “NETWORK AND SHARING CENTER”
• Click “CHANGE ADAPTER SETTINGS”
• Click “ETHERNET” then Right Click, Click “PROPERTIES”
• Double Click “INTERNET PROTOCOL VERSION 4 IPv4”
• CHOOSE “USE THE FOLLOWING IP ADDRESS”
• IP ADDRESS: (na assign saimo)
• DEFAULT GATEWAY: (na assign sa imo)
• PRESS “OK”
• CLOSE
• DONE!!!

PS: Need nimo e CHANGE ang imong ACCOUNT NAME kay checkan pod daw na ni sir.
“CLIENT PC” GUIDE 2 (Depende na sa PC nimo sa CLIENT kung unsay GUIDE
magamit nimo, GUIDE 1 ba or GUIDE 2)

• PLUG-IN FLASHDRIVE
• The Computer will RESTART/OPEN
• Press “DELETE” to open BIOS

Choose BOOT MENU(F8)


Choose “FLASHDRIVE” para ma install ang win11
PARTITION dayun ang mo appear human ug pili sa “FLASHDRIVE”
• PARTITION
E Delete TANAN, EXCEPT sa “UNALLOCATED”
Click “UNALLOCATED”, Click “NEW”
*C:+ x 1024 = ANSWER(maoy ibutang sa “NEW”), if dili makuha ang need nimo
e *C:+ x 1024 = ANSWER + 350 = ANSWER(maoy ibutang sa “NEW”)
if done naka sa [C:] proceed napod sa [D:]
Click “UNALLOCATED”, Click “NEW” then
*D:+ x 1024 = ANSWER(maoy ibutang sa “NEW”)
if nakuha na tanan, Click “*C:+”, sa *C:+ musulod guys ayg kalimot then Click “NEXT”
pag mag countdown na 10seconds then mupalong ang PC imo dayun “TANGGALON
ang FLASHDRIVE…”
• GO TO “CONTROL PANEL” (to change IP ADDRESS para ma ping sila duha Client and
Server)
• Click “NETWORK AND INTERNET”
• Click “NETWORK AND SHARING CENTER”
• Click “CHANGE ADAPTER SETTINGS”
• Click “ETHERNET” then Right Click, Click “PROPERTIES”
• Double Click “INTERNET PROTOCOL VERSION 4 IPv4”
• CHOOSE “USE THE FOLLOWING IP ADDRESS”
• IP ADDRESS: (na assign saimo)
• DEFAULT GATEWAY: (na assign sa imo)
• PRESS “OK”
• CLOSE
• DONE!!!

PS: Need nimo e CHANGE ang imong ACCOUNT NAME kay checkan pod daw na ni sir.
“SERVER PC”

Flow sa EXAM

1. Reformat PC

2. Configure TCP/IP (Control Panel)

3. Create Domain

AD DS

DHCP SCOPE

DNS

1. Reformat PC

• INSERT FLASHDRIVE
• PRESS “DELETE” para mugawas BIOS
• “SETTINGS”
• “BOOT OPTION 1”
• Click “USB/FLASHDRIVE na nay brand”
• Balik “SETTINGS”
• “SAVE CHANGES AND REBOOT”
• PARTITION
E Delete TANAN, EXCEPT sa “UNALLOCATED”
Click “UNALLOCATED”, Click “NEW”
*C:+ x 1024 = ANSWER(maoy ibutang sa “NEW”), if dili makuha ang need nimo
e *C:+ x 1024 = ANSWER + 350 = ANSWER(maoy ibutang sa “NEW”)
if done naka sa [C:] proceed napod sa [D:]
Click “UNALLOCATED”, Click “NEW” then
*D:+ x 1024 = ANSWER(maoy ibutang sa “NEW”)
if nakuha na tanan, Click “*C:+”, sa *C:+ musulod guys ayg kalimot then Click “NEXT”
pag mag countdown na 10seconds then mupalong ang PC imo dayun “TANGGALON
ang FLASHDRIVE…”
• After REFORMAT, mugawas tung “KMS” na need nimo e pillion

2. Configure TCP/IP (Control Panel)

• “CONTROL PANEL”
• Click “NETWORK AND INTERNET”
• Click “NETWORK AND SHARING CENTER”
• Click “CHANGE ADAPTER SETTINGS”
• Click “ETHERNET” then Right Click, Click “PROPERTIES”
• Double Click “INTERNET PROTOCOL VERSION 4 IPv4”
• CHOOSE “USE THE FOLLOWING IP ADDRESS”
• IP ADDRESS: (na assign saimo)
• DEFAULT GATEWAY: (na assign sa imo)
• PRESS “OK”
• CLOSE

3. Create Domain

AD DS

DHCP SCOPE

DNS

(SERVER MANAGER)

• “Local Server”
• Click ang naa sa Computer name “WIN-H8M68HIV3LF”
• E Change ang naa sa Computer name to (kung unsay na assign saimo)
• Click “OK”
• You must restart your computer to apply these changes, Click “OK”
• Click “RESTART NOW”
• Then go to SERVER MANAGER again
• Click “MANAGE”
• Click “ADD ROLES AND FEATURES”
• “NEXT”
• Choose “ROLE BASED OR FEATURE-BASED INSTALLATION”
• “NEXT”
• Choose “SELECT A SERVER FROM THE SERVER POOL”
• “NEXT”
• Click “Active Directory Domain Services” then click “Add Features”
• Click “DHCP Server” then click “Add Features”
• Click “DNS Server” then click “Add Features”
• Click “Continue”
• Click Check “Active Directory Domain Services”, “DHCP Server”, “DNS Server”
then CLICK “NEXT”
• “NEXT”
• “NEXT”
• “NEXT”
• “NEXT”
• “INSTALL”
• Click “Promote this server to a domain controller”
• Select “Add a new forest”
• Mag Type dayun ka sa ROOT DOMAIN NAME: (__?__)
• “NEXT”
• Butang dayun kag “PASSWORD”
• “NEXT”
• “NEXT”
• Mag type dayun ka sa The NetBIOS DOMAIN NAME: (__?__)
• “NEXT”
• “NEXT”
• “NEXT”
• “INSTALL”
• Click “Complete DHCP configuration”

• “MANAGE”
• “ADD ROLES AND FEATURES”
• “NEXT”
• “NEXT”
• “ROLE-BASED OR FEATURE-BASED INSTALLATION” then click “NEXT”
• “NEXT”
• “close”
• Click Check “DHCP Server”
• “NEXT”
• “NEXT”
• “NEXT”
• E CHECK ang “RESTART THE DESTINATION SERVER AUTOMATICALLY IF REQUIRED”
• Nay mugawas IF A RESTART IS REQUIRED ETC ETC, CLICK “YES”
• “INSTALL”
• Click “COMPLETE DHCP CONFIGURATION”
• “NEXT”
• Select “USE THE FOLLOWING USER’S CREDENTIALS”
• Click “COMMIT”
• “CLOSE”
• “CLOSE”
• Click “TOOLS” (tapad sa MANAGE kung wala ka katuod)
• Click “DHCP”
• Drop down server(something)

• drop down “IPv4”


• Right Click “IPv4”
• Click “NEW SCOPE”
• NAME: (naka assign saimo)
• “NEXT”
• “NEXT”
• Start IP ADDRESS: (naka assign saimo)
• End IP ADDRESS: (naka assign saimo) (diri naka mag solve sa BITS BORROWED and 2(h))
• Length: 24
PS: Kung mag ingon si sir ug 20, e convert dayun nimo sa "BINARY". (e cancel nimo kung ma
error once) utro dayun..(kung naay existing scope E DELETE TOH)
• “NEXT”
• “NEXT”
• “NEXT”
• “NEXT”
• Parent Domain: (__?__)
IP ADDRESS: (__?__)

THEN “NEXT”
• “NEXT”
• “NEXT”
• “FINISH”
E PING NA DAYUN
• PING PC1 TO PC2, PC2 TO PC1
• Go to “CONTROL PANEL”
• “NETWORK AND INTERNET”
• “NETWORK AND SHARING”
• “CHANGED ADVANCED SHARING SETTINGS”
• Then “TURN ON NETWORK DISCOVERY”
• Then “TURN ON NETWORK FILE & PRINTER SHARING”
• Then “TURN OFF PASSWORD”

CHECK CONNECTION
• RUN CMD
• Type “ipconfig /all”
• PING PC1 USING IP ADDRESS OF PC2 (example: type “ping 192.168.1.3”)
• PING PC2 USING IP ADDRESS OF PC1

DONE….thank you for your understanding…..

You might also like