1 L5-080 14 15 LEGEND

22030 CONTROL PANEL AREA

1 1 1 1 2 2 9000
(SL-PO-01-02)

N
33060 33090 33040 33070 33090 33070 NORTH ORIENTATION

-4 -3 -2 1 2 3 4 5 5' 6 7 8 9 10 11 12 13 14 15 L L5-081
0 1 2 5 10
FL 42.150 m MACHINE
ROOM KEAD SCALE REFERENCE
SCALE 1:200 METERS
(SL-PO-01-02)
FL 41.050 m
160650

9000
DN PROPERTY LINE
6000 4800 9000 6400 10000 9100 3800 9100 9000 9000 9000 9000 9000 9000 9000 9000 9000 MACHINE
ROOM BELOW

K SETBACK LINE
L5-022
FL 39.300 m L5-026
FIRE EXIT
PROTECTED CORRIDOR STAIR 3
VIADUCT REFERENCE LINE

6000
MAINTENANCE ACCESS
DEMOUNTABLE ALUMINUM PANELS DECK BELOW 16 17 SLOT DRAIN
PROPERTY BOUNDARY 10500 10950

STORM LOUVERS

2000
N 2 L5 MACHINE ROOM PLAN
1000
11140 SCALE 1 : 200 TOP OF FINISHED FLOOR LEVEL
DD DD DD DD FLOOR LEVEL
4000

FL +1.00
DD
DD DD DD DD DD DD DD
SL +0.95 PLAN & ELEVATION
TOP OF STRUCTURE LEVEL
SOUND ATTENUATOR
M OUTLINE OF HOISTING BEAM L5-073
L5-009 SD SD
L5-007 PANTRY SLAB OPENING
EE ROOM 1 GRILL SERVICE
MCC ROOM L5-010 L5-023
STATION STATION
1 FL 39.300 m PANTRY/ ROOF DECK 1
9000

POOL DD DD DD FL 39.150 m
33080 0085 33080
0085 L5-008 SUPPORT EQUIPMENT CONCRETE
L5-012 L5-020 FL 39.300 m
DD AHU
ELV ROOM 33 PLINTH
UP BUFFET SERVICE CORRIDOR

SLOT DRAIN

SLOT DRAIN
CAGED LADDER FL 39.300 m DD
L 70 L4M-003 L5-017 PL-FL 01 ACOUSTIC SOUND
00 CHILLER PLANT ROOM
L5-068 L5-067 SD SD
ATT
EVENT SPACE 2 DD ATTENUATORS
COLD SAD STORAGE
FL 37.800 m FL 39.300 m L5-019 KEAD
A' KITCHEN
LOBBY
PL-FL 02
L5-021
11140
9000

L5-002 FL 39.300 m ACOUSTIC LOUVERS

0073 PLANTER SERVICE DD DD
70 RAD DD
KITCHEN LOBBY 2
00 FHC PL-FL 03
FL 39.300 m
MACHINE
SOUND ATTENUATOR ROOM
FL 39.300 m
B' SD SD SD SD
DS SD SD DS
PL-FL 04
FHC CHWP
CEILING BELOW
K FL 39.300 m L5-028
70 SLOT DRAIN UP L5-022 DD
DN
00 L5-069 JANITOR'S UP
PLANTER CLOSET 4 FIRE EXIT STAIR 3

SCREED CHANNEL

150

150
DISH / POT WASH L5-029 BEAM WITH CEILING BELOW
L5-065
C' MUAD & KEAD PWD TOILET
9000

MAINTENANCE ACCESS CHILLER SD SD

40 FL 39.150 m DD DD
68 DECK BELOW DN DD DD UP DD DD L5-026
0 DN SPD
SD
L5-025 L5-024 PROTECTED CORRIDOR
L5-064 FOLDING WALLS
11 FIRE EXIT STAIR 8 UP
BOH MEP
00 SD FL 39.300 m
D' 0 HS SD
J L5-055
150
DN L5-032
FI FL 39.690 m DD PWD RAMP
SERVICE CORRIDOR
0085
PL-PO-01 PL-PO-02 PL-PO-03 PL-PO-04 SEATING AREA DD DD
FI L5-016 FI FI FI

SCREED CHANNEL
POOL FL 39.600 m DD DD DD DD
DN
L5-072 DN L5-061 FL 37.800 m
9000

0085 L5-027
FOYER CABANA LANDSCAPE
COMPRESSOR ROOM
86 FL 39.300 m FI
FEMALE TOILET 2
80 SD SD OD OD L5-030
L5-060 OD MALE TOILET 2
E' MALE TOILET 1
SCREEN BY LANDSCAPE UP
DD DD DD DD
1 METAL SCREENS ON
SD PLANTERS
SD 33050
H L5-062
L5-063 FHC FI DD
PWD TOILET JANITOR'S CLOSET 1 OD DIRECTIONAL TRAFFIC
L5-058 DD
VIP LOBBY L5-059 AHU DECK
L5-057
FEMALE TOILET 150
FL 40.050 m
9000

F' F. STAFF TOILET 1 FL 39.300 m RAMP TRENCH DRAIN

1

SCREED CHANNEL
33050 FI OD
L5-056 0085 SITE TRENCH DRAIN
HL-VIP-03 HL-VIP-02 HL-VIP-01
JANITOR'S CLOSET 2 MD
SLAB OPENING AT LEVEL +39.95 150 FLOOR DEPRESSION TAG
L5-013
G ALFRESCO MD
HL-HZ 01 HL-HZ 02 HL-HZ 03 FI OD DD DD SLAB /DECK/ AREA DRAIN
L5-012 FL 39.300 m SD SD
CABANA SD SD / AD
L5-054
103600

BUFFET SD 1
M. STAFF TOILET L5-053 PLANTER DRAIN
FL 39.300 m SD PD
HOTEL LOBBY 22020
9000

1 FL 39.300 m OD
DN SECURITY OUTPOST
22010 L5-016
0085

SCREED CHANNEL
POOL DD BOLLARD
HL-LZ 01 HL-LZ 02 HL-LZ 03 FL 37.800 m
BARRIER
F L5-052 SD
FI OD
ENTRANCE
BARRIER ENTRY
DD
HOTEL LOBBY
SAD & RAD

SD CABANA SLAB OPENINGS AT LEVEL +39.95 BARRIER

FL 39.300 m L5-079 EXIT
BARRIER EXIT
SD
PRIVATE DINING ROOM
0085 FI SIGNAGE
9000

OD SIGNAGE
HS HL-LZ 06 HL-HZ 05 HL-LZ 04 SD
FHC
L5-015

SCREED CHANNEL
PARKING GUIDANCE SYSTEM -
PGS LED
L5-050 L5-043 POOL DECK LED PARKING SLOT INDICATOR
L5-051 L5-042 FL 39.150 m
ELV ROOM 32 EE ROOM 2 NURSING ROOM STAIR 5 (FOH)
DN
150 OD
CEILING BELOW DD ABBREVIATIONS
E L5-049 AHU AIR HANDLING UNIT FD FLOOR DRAIN
HS FI

BUILDING SETBACK LINE

PWD LIFT
EVS ROOM 1 CHW

PROPERTY BOUNDARY
SD
AD AREA DRAIN HS HYDRAULIC SHAFT
SERVICE CORRIDOR

SL/FL-05 OD
SL-PL-03 SL-PL-04 SD CENTRAL BATTERY
9000

L5-041 CBS SYSTEM KED KITCHEN EXHAUST DUCT

SCREED CHANNEL
L5-055

SL-TO-04 FI GIRL'S RESTROOM

L5-048 CHWP CHILLED WATER PIPE LC LINEN CHUTE
OD
FL 39.150 m
SERVICE LOBBY 1 CABANA L5-039 ELECTRICAL ROOM
FL 39.300 m DD
EE PAHU PRIMARY AIR HANDLING UNIT
BOY'S RESTROOM
D FI DN L5-071 ELV ELEC. LOW VOLTAGE RM. PD PLANTER DRAIN

FL 39.300 m SD SD LOCKER AREA ENVIRONMENTAL

150
L5-035 EVS SPD STAIR PRESSURIZATION DUCT
SL-TO-01 SL-TO-02 SL/FL-03 SL-PO-06 SL-PO-05 SERVICES
SHALLOW POOL
3350
ELEVATOR / LIFT SYMBOLS
9000

0085
FHC L5-044 AD
L5-047 FI STORM LOUVERS
DN FHC CORRIDOR
FIRE EXIT STAIR 1 SD DN FL 38.470 m FIREMAN'S LIFT VEHICLE LIFT
PL-PO-01 SL-FL-PO VL-01

STORM LOUVERS
L5-046 UP SPD 0085 UP
0050 SL-FL-03
DD
EMT/ INFIRMARY
C PASSENGER LIFT SERVICE LIFT

7140
0085 PODIUM FUNCTION LOBBY FREIGHT FREIGHT (PODIUM)
L5-040 L5-038 SLAB OPENINGS AT LEVEL +39.95 PL-PO-01 PL-FL-01 SL-TO-01 SL-TO-04 SL-PO-01 SL-PO-05
L5-077 L5-078 JANITOR'S CLOSET 3 PWD TOILET PL-PO-02 PL-FL-02
L5-033 SL-TO-02 SL-FL-05 SL-PO-02 SL-PO-06
FUNCTION FUNCTION PL-PO-03 PL-FL-03 SL-FL-03 SL-PO-03 SL-FL-PO
9000

ROOM 1 ROOM 2 L5-045 KIDS' CLUB (OUTDOORS) PL-PO-04 PL-FL-04 SL-PO-04

KIDS' CLUB FL 39.300 m HANDICAP LIFT CASHIER CAGE LIFT
FL 39.300 m HL-01 SL-CC-01 (THRU TYPE)
L5-076 OPEN BELOW VIP - HELIPAD LIFT HOTEL LIFT
SNACKBAR DD PRL-HELI
LOW ZONE HIGH ZONE VIP ZONE
B
PROPE

CARPARK LIFT HL-LZ-01 HL-LZ-05 HL-HZ-01 HL-VIP-01

DN
3350 CPL-01 CPL-05
AD AD HL-LZ-02 HL-LZ-06 HL-HZ-02 HL-VIP-02
CPL-02 CPL-06
STORM LOUVERS HL-LZ-03 HL-HZ-03 HL-VIP-03
CPL-03
RTY BO

(THRU TYPE)
6. 0 m S

CPL-04 HL-LZ-04

SOLN-CR-SUR-NP-0050 19/04/2022
9600

8
SOLN-CR-SUR-NP-0073 19/04/2022
EDGE

UNDAR

E T BA C

SOLN-CR-SUR-NP-0085 19/04/2022
BUILDING SETBACK LINE 7 SOLN-CR-PBD-BA101-0133 04/03/2022
6 SOLN-CR-SUR-NP-0023 26/01/2022
OF VI A

K FRO
Y

SOLN-CR-SUR-BA101-0024 26/01/2022
A PROPERTY BOUNDARY 5 SOLN-CR-PBD-BA101-0084 18/09/2021
SOLN-CR-PBD-BA101-0086 18/09/2021
DUCT

M EDG

SOLN-CR-PBD-BA101-0102 18/09/2021
SOLN-CR-PBD-BA101-0073 18/09/2021

N
SOLN-CR-SUR-NP-0025 18/09/2021
E OF V

1 GENERAL ARRANGEMENT LEVEL 05 FLOOR PLAN 1 1 1 1 2 2 REV NO DESCRIPTION DATE

11140 SCALE 1 : 200 1 ISSUE STATUS
33060 33090 33040 33070 33090 33070
IADUC

22040 0 1 2 5 10

SCALE 1:200 METERS

ISSUED FOR CONSTRUCTION
T

ARCHITECT OWNER DRAWING TITLE

REG. NO. 5411 STRUCTURAL CONSULTANT MEPF CONSULTANT ARCHITECTURAL CONSULTANT INTERIOR DESIGN CONSULTANT QUANTITY SURVEYOR RELEVANT CONSULTANT PROJECT
GENERAL ARRANGEMENT LEVEL 05 FLOOR
TIN 146-555-136
PLAN

PTR 8857200 www.habitusdesigngroup.com

SOLAIRE NORTH SURESTE PROPERTIES INC.
PROJECT NO.: SCALE: 1:200@A0 DRAWN: CAD
JOSE A. SY DRAWING NO.: REV No.
FORSSPAC AEDAS PTE LTD
CARMELO T. CASAS ISSUED ON 01/06/2022 SY^2 + ASSOCIATES, INC. STRUCTURAL ENGINEER No. 117, 2nd Flr, Prince Bldg, The Metropolis Tower 2,
HABITUS SOLN-CD-AOR-CAS-L5- 11140 4
8
9801 Kamagong St., cor. Rada Street, Legaspi Village, 11 North Buona Vista Drive,
Baticulin St., Makati City REG. NO. 22404 TIN 123-489-697 Makati, Philippines REG. NO. TIN #12-07, Singapore 138589 228 Pasong Tamo Ext.
E: [email protected] T: +65 6734 4733 (Chino Roces Ave.) Level 5, Tower 6789, Ayala Avenue, ALL MEASUREMENTS ARE TO BE VERIFIED ON SITE BY CONTRACTOR. ALL DISCREPANCIES ARE TO BE IMMEDIATELY REPORTED TO
01-03-19 T:+632 310 5130
ARCHITECTS & PROJECT MANAGERS. CONTRACTORS ARE TO PREPARE & SUBMIT SHOP DRAWINGS TO ARCHITECTS PRIOR TO
Penthouse, Paseo Center, 8757 Paseo De Roxas PTR NO. 7333196 DATE PTR NO. DATE Barangay Bel-Air, Makati,
ISSUED AT MAKATI CITY T: 893-4157 / 896-9760 F:+632 310 5134 F:+65 67346233 Makati Metro Manila Philippines COMMENCEMENT OF WORKS. THIS DRAWING, ACTING AS INSTRUMENT OF SERVICE, IS THE PROPERTY OF CASAS+ARCHITECTS, INC. &
Avenue, Salcedo Village, Makati City / 896-9755 PLACE MAKATI CITY PLACE www.aedas.com T: +63 920 974 4852 1226 Metro Manila, Philippines EDSA, VERTIS NORTH, QUEZON CITY, PHILIPPINES 1, ASEAN AVENUE, ENTERTAINMENT CITY, TAMBO, PARAÑAQUE CITY, PHILIPPINES CANNOT BE REPRODUCED WITHOUT THEIR WRITTEN CONSENT.
- REPUBLIC ACT No. 9266
M:+63 928 500 4727
GENERAL NOTE: DO NOT SCALE FROM DRAWING. USE MARKED DIMENSIONS. TO BE READ IN CONJUNCTION WITH ALL OTHER CONSULTANT'S DRAWINGS. THE ARCHITECT TO BE IMMEDIATELY NOTIFIED OF ANY DISCREPANCIES. COPYRIGHT ON THE DRAWING RETAINED BY THE ARCHITECT.
 GENERAL NOTES:
1. LOCATION OF ALL MECHANICAL, ELECTRICAL, PLUMBING AND FIRE PROTECTION EQUIPMENT/
SYSTEMS ARE NOT YET FINAL. ALL PROVISIONS SHOWN ON THE DRAWING ARE SUBJECT TO
16 3 CHANGE UPON FINALIZATION OF MEPFS DESIGN.
2. KITCHEN LAYOUT ARE NOT YET FINAL. KINDLY REFER TO KITCHEN CONSULTANT ON ALL
52432 L5-58002 1 DRAWINGS AND SPECIFICATIONS REFLECTED ON DRAWING.
CH +4100 3. VERIFY ALL STRUCTURAL ITEMS TO STRUCTURAL ENGINEER BEFORE PROCEEDING ANY
WORK ON SITE.
4. ACOUSTIC PROPERTIES ARE NOT YET FINAL. KINDLY REFER TO ACOUSTIC CONSULTANT ON
ALL DRAWINGS AND SPECIFICATIONS REFLECTED ON DRAWING.

FLOOR PLAN NOTES:

1. VERIFY AND COORDINATE ALL DIMENSIONS AND ALL EXTERIOR DOOR AND WINDOW
LOCATIONS WITH ARCHITECT'S DRAWINGS.
CH +3900 2. REFER TO DOOR TAGGING PLAN AS REFLECTED ON FLOOR PLAN AND DOOR SCHEDULE FOR
ALL INTERIOR DOORS INFORMATION.
3. COORDINATE ALL SERVICE EQUIPMENT AND REQUIREMENTS WITH CONSULTANTS.
4. ALL PARTITIONS TO BE ADEQUATELY BRACED IN COMPLIANCE WITH THE REQUIREMENTS OF

CH +3800 ALL APPLICABLE SEISMIC AND BUILDING CODES.

5. CONTRACTOR TO PROVIDE ADEQUATE WOOD BLOCKING AS REQUIRED FOR INSTALLATION
AND MOUNTING OF MILLWORKS, ACCESSORIES AND OTHER NECESSARY INSTALLATIONS AS
INDICATED ON DRAWINGS.
6. DIMENSIONS ARE TAKEN FROM THE FINISHED FACE OF WALLS. DIMENSIONS LOCATING
DOORS BY EDGE ARE TO THE INSIDE EDGE OF JAMB, UNLESS OTHERWISE NOTED.
7. PROVIDE WATER- RESISTANT SUBSTRATE AT ALL SURFACES TO BE EXPOSED TO WATER
CH +3650 AND/ OR TO RECEIVE CERAMIC TILE.
8. CONTRACTOR TO VERIFY SETTING-OUT OF FINISHES ON DRAWINGS AND ON SITE WITH C+A
PRIOR TO FINAL LAYING OUT OF FINISHES.
9. CONTRACTOR TO SUBMIT SAMPLE/S OF ALL HARDWARE, ACCESSORIES AND FINISHES AS
SPECIFIED FOR APPROVAL PRIOR TO FULL-PURCHASING.
10. CONTRACTOR TO SUBMIT SHOP DRAWINGS FOR ITEMS NOT SHOWN IN THE DRAWING SET
CH +3500 AND IS REQUIRED TO BE DONE AT SITE TO COMPLETE THE WORKS FOR APPROVAL PRIOR TO
IMPLEMENTATION ON SITE.
11. CONTRACTOR TO VERIFY AND MARK ON SITE THE SETTING-OUT FOR ALL TOILET FIXTURES.

6 TO VERIFY MANUFACTURER'S INSTALLATION REQUIREMENTS AND PREPARATIONS NEEDED

FOR PROPER INSTALLATION OF ALL FIXTURES.
12. REFER TO ACOUSTIC CONSULTANT'S DRAWING PACKAGE FOR SOUND INSULATION RATING

650
AND SPECIFICATION.
13. REFER TO DOOR SCHEDULE FOR ALL INTERIOR DOOR INFORMATION.
14. VERIFY AT JOBSITE ALL DIMENSIONS PRIOR TO CONSTRUCTION.
15. CONTRACTOR TO VERIFY TERMINATIONS ON SITE WITH THE DESIGNER.
16. REPORT TO INTERIOR DESIGNER ANY INCONSISTENCIES AND CONFLICTS FOUND AT JOBSITE
PRIOR TO ADJUSTMENT ON DESIGN AND DETAILS IN DRAWINGS (IF ANY).

FLOOR FINISH NOTES:

1. ALL WALL FINISHES ARE INDICATED ON ELEVATION DRAWINGS.
2. THIS PLAN INDICATES THE TYPES OF FINISHES. FLOOR FINISHES TO CONTINUE TO TOE KICK
OR BASE OF MILLWORK. REFER TO DETAILS INDICATED FOR ADDITIONAL INFORMATION.
3. ALL FINISH MATERIALS PROVIDED MUST COMPLY WITH THE REQUIREMENTS OF APPLICABLE
70 1 CODES, RULES, REGULATIONS, LAWS, ORDINANCES, ETC. AS REQUIRED BY THE PUBLIC
AUTHORITIES.
4. ALL STONE AND TILE FINISHES INSTALLED AT FLOOR SURFACES ARE TO MEET OR EXCEED
10

50
SLIP COEFFICIENT RATIO AS REQUIRED BY CODE.
MINIATURE 5. ALL FLOOR FINISHES TO BE INSTALLED IN ACCORDANCE WITH MANUFACTURERS
SPECIFICATIONS FOR THE PARTICULAR APPLICATION INDICATED ON DRAWINGS.
10

DOWNLIGHT BY 6. VERIFY FLOOR LEVEL CHANGES, CONTRACTOR TO LEVEL SUB FLOOR AS REQUIRED FOR
PAINTABLE PROPER INSTALLATION OF FLOOR FINISH MATERIAL.
LIGHTING 7. CONTRACTOR TO SUBMIT SAMPLES OF ALL FINISHES FOR WRITTEN APPROVAL PRIOR TO
SEALANT INSTALLATION. INSPECT ALL MATERIALS FOR DEFECTS PRIOR TO INSTALLATION.
CONSULTANT 8. THE PURPOSE OF THIS DRAWING IS FOR CONTRACTOR'S REFERENCE WITH REGARDS TO
SURFACE PREPARATION (DEPRESSIONS) PRIOR TO HANDOVER.
9. CONTRACTOR'S SHALL PROVIDE REQUIRED LEVELING FILLS AND GROUTS TO RENDER ALL
FLOOR FINISH TO FLOOR FINISH TRANSITION LEVEL.
10. REFER TO ARCHITECTURAL DRAWINGS FOR ALL FINISH FLOOR LINE.
11. REFER TO ARCHITECTURAL/ STRUCTURAL FOR ANY TOILET & KITCHEN SLAB DEPRESSION.
MT AUXILLARY PLAN NOTES:
1. POWER/ DATA RECEPTACLES TO BE MOUNTED AT 300mm ABOVE FINISHED FLOOR TO
CENTERLINE IF COVER PLATE MOUNTED HORIZONTAL UNLESS OTHERWISE INDICATED ON
DRAWINGS. VERIFY ORIENTATION WITH ELEVATIONS AND CONFIRM CODE REQUIREMENTS.
NOTIFY DESIGNER OF ANY DISCREPANCIES.
PAINTABLE 2. POWER/ DATA RECEPTACLES ABOVE COUNTERS TO BE MOUNTED AT 150mm ABOVE FINISHED
COUNTERTOP TO CENTERLINE OF COVER PLATE, TYPICAL UNLESS OTHERWISE NOTED.
WC
850

SEALANT 3. ALL FLOOR BOXES TO BE FULLY RECESSED WITH METAL FLUSH BOX COVER. COVER FINISH
TO BE SELECTED BY DESIGNER.

1040
4. ALL WORK SHALL BE PERFORMED IN COMPLIANCE WITH THE REQUIREMENTS OF APPLICABLE
CODES, RULES, REGULATIONS, LAWS, ORDINANCES, ETC. AS REQUIRED BY THE PUBLIC
AUTHORITIES. IN THE EVENT OF A CONFLICT THE MOST STRINGENT REQUIREMENT SHALL
GOVERN.
5. ELECTRICAL CONTRACTOR SHALL COORDINATE WITH ALL OTHER TRADES THE INSTALLATION
WD OF ELECTRICAL FIXTURES AND SYSTEMS.
6. WHERE TELEPHONE, DATA AND/ OR ELECTRICAL RECEPTACLES APPEAR BACK-

REQUIRED FRAMING TO-BACK,JUNCTION BOXES SHALL BE STAGGERED TO REDUCE NOISE TRANSMISSION

THROUGH PARTITION.
7. VERIFY IN FIELD THAT NO CONFLICTS EXIST WHICH WOULD PROHIBIT THE LOCATION OF ANY
AND SUPPORT AND ALL MECHANICAL, ELECTRICAL, TELEPHONE, LIGHTING, PLUMBING, AND SPRINKLER
125 850

100
125 EQUIPMENT (INCLUSIVE OF ALL PIPING, DUCTWORK AND CONDUIT) AND THAT ALL REQUIRED
CLEARANCES FOR INSTALLATION AND MAINTENANCE OF ABOVE EQUIPMENT IS PROVIDED.
WD 8. PAINTED SWITCH AND/ OR OUTLET COVER PLATES,SPEAKERS, FIRE EXTINGUISHER
CABINETS, ELECTRICAL PANELS AND ACCESS PANELS TOO BE SHOPFINISHED. FACTORY
PAINT FINISH TO MATCH COLOR SELECTED BY DESIGNER.
10

REQUIRED FRAMING 9. ALL ELECTRICAL SWITCH & OUTLET RECEPTACLES PLEASE REFER TO FF&E LIST OF
SPECIFICATIONS.
10 AND SUPPORT
70 WD WD FF&E NOTES:
1. FOR ALL ROUGH CARPENTRY AND BLOCKING, INSTALL FIRE- RETARDANT TREATED WOOD AS
REQUIRED TO COMPLY WITH THE REQUIREMENTS OF APPLICABLE CODES, RULES,
REGULATIONS, LAWS, ORDINANCES, ETC. AS REQUIRES BY THE PUBLIC AUTHORITIES.
650

475

2. COORDINATE INSTALLATION OF IN-WALL STEEL ANCHORAGES, GROUNDS AND

60
MISCELLANEOUS BLOCKING WITH OTHER CONTRACTORS TO DETERMINE PRECISE
LOCATIONS.
3. MILLWORK CONTRACTOR SHALL OBTAIN AND VERIFY ALL FIELD MEASUREMENTS AND
515

CONDITIONS AFFECTING HIS/ HER WORK AND SHALL BE RESPONSIBLE FOR ALL DETAILS AND
DIMENSIONS ASSURING PRECISION FITTING AND PROPER ASSEMBLY OF HIS/ HER
WD PRODUCTS.
4. WORK SHALL BE ACCURATELY SET PLUMB, LEVEL AND SECURE FASTENED TIGHTLY AND

ST ACCURATELY TO ADJACENT SURFACES, AND SECURELY ANCHORED IN POSITION INDICATED

340
ON DRAWINGS AND APPROVED SHOP DRAWINGS.
5. REPAIR, REPLACE OR OTHERWISE MAKE GOOD ALL DAMAGE INCURRED TO PRE-FINISHED
WOODWORK DURING HANDLING AND INSTALLATION.
6. ADJUST DOORS, DRAWERS AND ALL HARDWARE FOR PROPER OPERATION AND CLEAN ALL
CABINET SURFACES, INSIDE AND OUTSIDE.
WD 7. SHOP DRAWINGS OF ALL MILLWORK ITEMS TO BE SUBMITTED TO DESIGNER FOR WRITTEN
APPROVAL PRIOR TO FABRICATION.

70
8. STAINED CABINET AND DOOR FINISHES ARE TO BE SHOP- FINISHED UNLESS OTHERWISE
NOTED.

60
9. ALL LOOSE FURNITURE REFLECTED HEREIN ARE REPRESENTATION ONLY AND ARE NOT
1100 425 425 PART OF THE BASE BUILDING CONTRACT. THIS WILL BE PART OF THE INTERIOR FIT-OUT
10 CONTRACTOR'S SCOPE.
425 50 1100 50 425 10. FOR MATERIAL CODES & SYMBOLS PLEASE REFER TO FF&E LIST OF SPECIFICATIONS.
11. VERIFY AT JOBSITE ALL DIMENSIONS PRIOR TO CONSTRUCTION.
ST 50 125 850 125 50 12. REPORT TO INTERIOR DESIGNER ANY INCONSISTENCIES AND CONFLICTS FOUND AT JOBSITE
PRIOR TO ADJUSTMENT ON DESIGN AND DETAILS IN DRAWINGS (IF ANY).
ST WD REFLECTED CEILING NOTES:
1. LOCATIONS OF ALL HVACS GRILLES, SMOKE DETECTORS, SPRINKLERS, FIRE ALARMS,
SECURITY CAMERAS, SPEAKERS, ETC. BY CONSULTANTS ARE TO BE COORDINATED WITH
PAINTABLE DESIGNER.
2. EXIT SIGNS AND ILLUMINATIONS TO CONFORM IN COMPLIANCE WITH THE REQUIREMENTS OF

WD ST SEALANT APPLICABLE CODES, RULES, REGULATIONS, LAWS, ORDINANCES,ETC. AS REQUIRED BY THE

PUBLIC AUTHORITIES. IN THE EVENT OF A CONFLICT THE MOST STRINGENT REQUIREMENTS
SHALL APPLY.
3. PAINTED SPRINKLER COVER PLATES, SPEAKERS, LIGHT FIXTURE TRIM RINGS, FIRE
2 ST EXTINGUISHER CABINETS, ELECTRICAL PANELS AND ACCESS PANELS TO BE SHOP- FINISHED,
FACTORY PAINT FINISH TO MATCH COLOR SELECTED BY THE DESIGNER.
L5-58001 4. PAINT ALL DUCTWORK BLACK BEHIND DIFFUSER GRILLES, TYPICAL UNLESS OTHERWISE
1100 NOTED.
5. ALL PAINT SHALL BE APPLIED IN ACCORDANCE WITH MANUFACTURERS RECOMMENDATION

1 DETAIL PLAN FOR THAT PARTICULAR SURFACE. TWO- COAT MINIMUM APPLICATION REQUIRED, UNLESS
OTHERWISE NOTED.
6. COORDINATE ALL A/V EQUIPMENT LOCATIONS AND REQUIREMENTS WITH A/V CONSULTANT.
L5-58001 SCALE 1:10 (A1) / 1:20 (A3) 7. ELECTRICAL/ MECHANICAL DRAWING PROVIDED ARE FOR THE PLACEMENT AND/ OR

15 50
GENERAL ARRANGEMENT OF FIXTURES, OUTLETS, ETC. AS RELATED TO THE DESIGN INTENT.
ALL REQUIRED ENGINEERING AND/ OR CALCULATIONS TO BE PERFORMED BY OTHERS,

25
UNLESS OTHERWISE NOTED.
8. REFER TO REFLECTED CEILING PLAN FOR INSTALLATION LOCATIONS OF ALL CEILING
MOUNTED DECORATIVE LIGHT FIXTURES.
9. REFER TO ELECTRICAL, HVAC AND FIRE PROTECTION DRAWINGS FOR SWITCHING, EXIT
SIGNS, EMERGENCY LIGHTING, DUCT, GRILLE, DIFFUSER LOCATIONS AND COORDINATION OF
REFER TO HARDWARE SPRINKLER HEAD LOCATIONS. ANY CONFLICT WITH LIGHTING FIXTURE LOCATIONS SHALL BE
BROUGHT TO THE ATTENTION OF THE OWNER AND COORDINATE.
INTENT 10. INTERIOR DESIGN (ID) CEILING PLANS ARE INTENDED TO SHOW CEILING FINISHES AND
PROFILES ONLY.
11. SEE INTERIOR DESIGN (ID) FLOOR PLANS FOR LOCATION OF ADDITIONAL DECORATIVE
LIGHTING NOT SHOWN ON CEILING PLANS (I.E. STAIR LIGHTS, AISLE LIGHTS). ALSO INDICATED
ON FLOOR PLAN ARE SPECIAL OUTLET LOCATIONS REQUIRED FOR PLUG-IN FLOOR AND
TABLE LAMPS. (COORDINATE WITH ELECTRICAL DRAWINGS, ID FURNISHINGS PLANS AND
DECORATIVE LIGHT FIXTURES AND CATALOGUE CUTS).

820
12. THE PURPOSE OF THIS DRAWING IS FOR CONTRACTOR'S REFERENCE FOR DECORATIVE
LIGHT FIXTURE AND ACCESSORIES (CHANDELIER) POSITIONS/ LOCATIONS FOR NECESSARY
SF

715

900
SUPPORT SYSTEM PROVISIONS.
13. SEE INTERIOR ELEVATIONS FOR LOCATION AND MOUNTING HEIGHTS OF WALL MOUNTED
FIXTURES. SEE DETAILS FOR SPECIAL LIGHT FIXTURE MOUNTING CONDITIONS.
14. CONTRACTOR TO PROVIDE SHOP DRAWINGS FOR ALL CASEWORKS FOR MOCKING-UP.
15. PROVIDE ADEQUATE BLOCKING CEILING AND/ OR WALL TO SUPPORT CEILING MOUNTED
DECORATIVE LIGHT FIXTURES AND ARTWORKS.
16. CEILING SERVICE ACCESS TO PLS. REFER TO MEPF LAYOUT (SUBJECT FOR DESIGNER'S
APPROVAL).
17. REFER TO LIGHTING CONSULTANT DRAWINGS FOR ALL LIGHTING REQUIREMENTS,
WD SPECIFICATIONS AND DETAILS.
18. REFER TO LIGHTING CONSULTANT'S DRAWINGS FOR FIXTURE TYPE AND LOCATION OF ALL
ARCHITECTURAL FUNCTIONAL LIGHTING.
19. REFER TO M&E CONSULTANT'S DRAWINGS FOR AIR CONDITIONING SYSTEM.
20. REFER TO ACOUSTIC CONSULTANT FOR CEILING INSULATION AND STC/ NRC RATING FOR
ADEQUATE DETAIL.
21. ALL CEILING HEIGHTS TO BE VERIFY ON SITE.

15
22. VERIFY AT JOBSITE ALL DIMENSIONS PRIOR TO CONSTRUCTION.
23. CONTRACTOR TO VERIFY TERMINATIONS ON SITE WITH THE DESIGNER.

80
24. CONTRACTOR TO PROVIDE MARKING OF LIGHT POINTS POSITION FOR DESIGNER'S
FFL. 0000 APPROVAL BEFORE INSTALLATION.
25. REPORT TO INTERIOR DESIGNER ANY INCONSISTENCIES AND CONFLICTS FOUND AT JOBSITE
PRIOR TO ADJUSTMENT ON DESIGN AND DETAILS IN DRAWINGS (IF ANY).

WD
FOR CONSTRUCTION DRAWING

1
52430

HARDWARE INTENT 2 DETAIL ELEVATION

ROCKY MOUNTAIN L5-58001 SCALE 1:10 (A1) / 1:20 (A3) 1 SOLN-CR-SUR-NP-0029 SEPT 30 2021
CK216 CATCH PULL 6" 0 ISSUED FOR CONSTRUCTION MARCH 31 2021
0 1 2 3 4
IN SILICON BRONZE REV NO DESCRIPTION DATE
ISSUE STATUS
BRUSHED BRASS SCALE 1:50 METERS
ISSUED FOR CONSTRUCTION
ARCHITECT STRUCTURAL CONSULTANT MEPF CONSULTANT ARCHITECTURAL CONSULTANT INTERIOR DESIGN CONSULTANT QUANTITY SURVEYOR RELEVANT CONSULTANT PROJECT DRAWING TITLE
REG. NO. 5411
L5 ALL DAY DINING
TIN 146-555-136
NICHE 1 DETAILS

PTR 8539233 www.habitusdesigngroup.com

SOLAIRE NORTH PROJECT NO.: SCALE:AS SHOWN DRAWN: CAS
JOSE A. SY SURESTE PROPERTIES INC.
DRAWING NO.: REV No.
FORSSPAC AEDAS PTE LTD
CARMELO T. CASAS ISSUED ON 01/07/2021 SY^2 + ASSOCIATES, INC. STRUCTURAL ENGINEER No. 117, 2nd Flr, Prince Bldg, The Metropolis Tower 2,
HABITUS SOLN-CD-ID-CAS-L5-L5-58001 1
9801 Kamagong St., cor. Rada Street, Legaspi Village, 11 North Buona Vista Drive,
Baticulin St., Makati City REG. NO. 22404 TIN 123-489-697 Makati, Philippines REG. NO. TIN #12-07, Singapore 138589 228 Pasong Tamo Ext. ALL MEASUREMENTS ARE TO BE VERIFIED ON SITE BY CONTRACTOR. ALL DISCREPANCIES ARE TO BE IMMEDIATELY REPORTED TO
E: [email protected] T: +65 6734 4733 (Chino Roces Ave.) Level 5, Tower 6789, Ayala Avenue,
Penthouse, Paseo Center, 8757 Paseo De Roxas PTR NO. 7333196 DATE 01-03-19 T:+632 310 5130
PTR NO. DATE
ARCHITECTS & PROJECT MANAGERS. CONTRACTORS ARE TO PREPARE & SHOP DRAWINGS TO ARCHITECTS PRIOR
ISSUED MAKATI CITY T: 893-4157 / 896-9760 F:+65 67346233 Makati Metro Manila Philippines Barangay Bel-Air, Makati, TO COMMENCEMENT OF WORKS. THIS DRAWING, ACTING AS INSTRUMENT OF SERVICE, IS THE PROPERTY OF CASAS+ARCHITECTS, INC.
Avenue, Salcedo Village, Makati City F:+632 310 5134 1, ASEAN AVENUE, ENTERTAINMENT CITY, TAMBO, PARAÑAQUE CITY, PHILIPPINES & CANNOT BE REPRODUCED WITHOUT THEIR WRITTEN CONSENT.
/ 896-9755 PLACE MAKATI CITY PLACE www.aedas.com T: +63 920 974 4852 1226 Metro Manila, Philippines EDSA, VERTIS NORTH, QUEZON CITY, PHILIPPINES
AT M:+63 928 500 4727 - REPUBLIC ACT No. 9266

GENERAL NOTE: DO NOT SCALE FROM DRAWING. USE MARKED DIMENSIONS. TO BE READ IN CONJUNCTION WITH ALL OTHER CONSULTANT'S DRAWINGS. THE ARCHITECT TO BE IMMEDIATELY NOTIFIED OF ANY DISCREPANCIES. COPYRIGHT ON THE DRAWING RETAINED BY THE ARCHITECT.